131,090 used machines on RESALE, but how to find them? Machine Search
The Bottero 131BMK is an automatic float cutting table for flat glass, designed for straight-line cutting. Below you'll find the key technical specifications and features. Technical specifications Bottero 131 BMK Machine type: Float cutting table (monolithic glass) Brand/Model: Bottero 131 BMK Year of construction: 2000 Chassis number: GG60KB-6011 Weight: approx. 2,250 kg Power: 14.2 kVA Power supply: 380 V / 50 Hz Air pressure: 3 bar compressed air required Maximum speed: 80 m/min Glass thickness: 2 – 18 mm Maximum glass size: 2550 × 3300 mm Capacity: Straight cutting, no shaping/cutting of complex patterns ⚙️Features Automatic cutting table with CNC control for straight-line cutting. Optimization software (depending on version) for cutting patterns. Pneumatic scoring system suitable for float and low-e glass. Robust design for long-term industrial use. ...
Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
power capacity: 0 kW volt: 0 V ampere: 0 A Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
power capacity: 0 kW volt: 0 V ampere: 0 A Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
power capacity: 0 kW volt: 0 V ampere: 0 A new motor with options G45 und K42 Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Warranty:, 1 year for continuous use, 2 years for standby use, Surplus unused 2022 generator., 2 similar units in stock; Gross weight [kg]: 1057; Engine: Cummins X3.3-G1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 71
turning diameter over slide rest: 940 mm turning length: 10000 mm turning diameter: 1250 mm spindle diameter: 105 mm speed: 1,6 - 315 (x24) m/min voltage: 380 V total power requirement: 75 kW weight of the machine ca.: t dimensions of the machine ca.: m 4-jaw faceplate Power compound The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Surplus unused 2022 generator set.; Gross weight [kg]: 6345; Engine: Cummins QSK23-G3; Accessories: Battery, Control Panel, Including : coolant heater and battery charger
QC11K 18×6000 hydraulic guillotine shears were built in 2018. This highly efficient machine is designed for precision cutting of sheet metal made from e.g. steel, non-ferrous metals, as well as selected plastics. Workpieces with a maximum thickness of 18 mm are machined by means of high-quality cutting knives with four cutting edges. All process parameters, on the other hand, are programmed on the intelligent DELEM CNC control with an intuitive interface and many useful functions. The QC11K 18×6000 guillotine shears weighs 40000 kg. Technical specifications of the QC11K 18×6000 guillotine shears - maximum cutting length: 6000 mm - maximum sheet metal thickness (Rm=420 N/mm2): 18 mm - maximum sheet metal thickness (Rm=700 N/mm2): 12 mm - work table height: 900 mm - back stop stroke: 1000 mm - adjustable gap between blades and cutting angle - motor power: 21 kW - power supply ...
; Gross weight [kg]: 2580; Engine: Perkins 1206-E70TTAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger, Including: sockets 63A - 32A - 16A 5P - 16A; Water Tank Volume [l]: 380
pressure: 2000 /1000 t distance between columns: 2650 mm stroke: 500 mm column travel -side: 500 x 1000 mm diameter of piston: 710 mm number of pistons: 2 distance between table / ram: 1000 mm operating pressure: 130 / 230 bar dayligth: 800 mm table length: 2500 mm table width: 1600 mm table height: 250 mm draw back pressure: 500 kN number of T-slots: 8 turning speeds: 1500 U/min rapid speed: 120 - 140 mm/min closing speed: max. 120 - 140 mm/sec. hydraulical ram locking: return of plunger by small single cylinders: 100 - 110 mm/sec cutting sound absorber: 300 t die cushion capacity: 200 t die cushion stroke: 250 mm speed of die cushion: 100 mm/sec voltage: 380 V frequency: 50 Hz quantity of oil: 2000 l total power requirement: 93 kW weight of the machine ca.: 90 t dimensions of the machine ca.: 5000 x 2500 x 7200 mm transport measurements: ca. 6500 x 3750 x 2190 mm 1991 assembly of a di ...
Year of manufacture: 2021, Connector size: 6 Perrot Cardan, Technical condition: very good, Visual appearance: very good, Damages: none, Price: On request, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, or email us, whichever you prefer., , Want to visit us? Yes, please!, , Our doors are open Monday through Friday from 7:00 a.m. to 4:00 p.m. On Saturdays, you are welcome by appointment.
Tipo de máquina Laminado y recubrimiento (laminating & coating) Procesos Preparada para laminado WET y DRY Probhvzbzjx N Ucxezjf Sistema de corte Sistema de cuchilla para poliéster (blade cutting system for polyester) Alimentador Mabeg feeder Formato mínimo de hoja 32 × 29 cm Formato máximo de hoja 106 × 142 cm Velocidad mecánica máx. 70 m/min Velocidad de producción máx. 65 m/min
length: 300 mm width: 150 mm height: 90 mm voltage: 24 V weight of the machine ca.: t dimensions of the machine ca.: m Power connection 24V / 2,8 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 440 mm turning length: 1500 mm control: C 200 Tool changer: 16 3 jaw chuck Forckrath: 500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
IDEAL Krug & Priester 1080 Lever Cutter Cutting Machine Material knife grinding angle 75° Ideal for cutting paper, cardboard, linoleum, plastic and metal foils, thin sheets and other materials Regrindable knife set made of Solingen knife steel Complete with solid base and foot pressure Fold-out side table, right Side stop with scale in mm and inches Infinitely adjustable back gauge with locking screw Front gauge with locking screw and narrow cutting device Dial knob for exact measurement of the front gauge Printed DIN format classification A3 to A6 Fixed, transparent blade guard made of shatterproof plastic and knife locking device Particularly stable knife bearing made of cast aluminium and double-bearing knife axis for precise cuts Extremely robust metal construction GS Seal of Approval Brand quality Made in Germany Cutting length: 800 mm Cutting capacity: approx. ...
1 of used motion controller, make Mayr / Pilz, type Primo Compact P21.004.0, part number 0802930, version: 1.7.3.1 (592). Came from operational ZVT packaging machine.
; Gross weight [kg]: 1237; Engine: Caterpillar C3.3; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 219
The JMC 150 has a mechanically adjustable hold-down. The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. The JMC 150 is a tabletop unit for easy handling. Manufacturer: Mc Intyre Knife length: 150 mm Measuring opening: 105 mm Cutting capacity: 25 tons Round iron ST 37: 25 mm diameter Number of strokes at 1/4 aperture: 20 / min Number of strokes at 1/2 opening: 12 / min Number of strokes at full opening: 9 / min Dimensions ( L x W x H ): 660 x 520 x 620 mm Weight: 150 kg Drive: 1.5 kw / 230 Volt Operation: Foot pedal
continuous grilling line suitable for frying, cooking or browning electric heating 400 kW 510A, 3 x 400V, 50Hz with bottom and top band : bottom and top contact frying Overall dimensions (L x W x H) : ± 7,700 x 2,300 x 2,400 mm Cooking time: from 10 sec. to 5 min. Useful length 6,000 mm Track width 1,060 mm max 260 degrees product height 250 mm Air: 6 bar - 100 l/min Water: 65 degrees - 2 bar - 30 l /min variable frying height infinitely variable speed pneumatically controlled tape Siemens PLC control with belt washing system
Centrifugal pump Manufacturer: Siemen & Hinsch Type: AKHE 1202 Item #: BN 08424 Power: 1.75/0.8 kW LBH: 880 x 500 x 1050 mm 2 copies in stock
Tetra Pak A3 Flex 1500ml Gemina TGA Filling Line For Sale Item #: Usm-141 Category Tetra Pak A3 CF/Flex Tetra Pak A3 Flex 1500ml Gemina Filling Line For Sale Filling machine Tetra Pak A3/Flex TGA1500Sq, in set with accessories, and Headspace by Injection kit, Year of manufacturing 2009 & Working hours 2427 Cap Applicator CAP 30/Flex, with HeliCap27 kit, Year of manufacturing 2008 & working hours 2631 Accumulation system ACHX-0400, Year of manufacturing 2008 & working hours 2404 Cardboard Packer TCBP70, Year of manufacturing 2003 & Working hours 8654 Set of conveyors TPC23 (35 meters with 3 drives) and spare parts for connection of components of the filling line, with dry lubrication system Line Controller LC 30, Year of manufacturing 2008 Condition: The line is currently in Production, Technical inspection can be arranged on request.Overall conditions of Equipment: Good.
1 of used feeder system with vertical delivery, make Pfankuch, type ASB-175 KR (control unit right), with VS 2000 controller, new 1999, product width min/max 47/105 mm, product height min/max 55/300 mm, speed max. 115 m/min (depending on product). Mulitvoltage 90-240V, 50-60Hz, 0.4 KW. Servo driven. Last used to feed coupons 95 x 74 mm at a speed of 120 coupons/minute.
grinding diameter: 610 mm grinding length: 3000 mm centre height: mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1310015 Type of machine Cylindric grinder Make STANKO Type 3M193/149 Build in 1988 Max. grinding diameter 610 Max. grinding length 3000 Grinding wheel diameter 700 Grinding wheel widht 75 Total Power (KW) 30 Additional information Incl. 2 staedys The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We offer you a used levelling plate here. Technical data for the compensating plate: Manufacturer: Meta The scope of delivery includes: 01x Compensating plate, used Material colour: sendz. galvanized Dimensions: 140 x 140 mm Material thickness: approx. 3.00 mm Drill hole Ø: approx. 11 mm Hole spacing (measurement center – center hole): approx. 90 mm Weight: 0.45 kg | Piece Your contact person in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
1 of used feeder system with vertical delivery, make Pfankuch, type ASB-175 KL (control unit left), with VS 2000 controller, new 1999, product width min/max 47/105 mm, product height min/max 55/300 mm, speed max. 115 m/min (depending on product). Mulitvoltage 90-240V, 50-60Hz, 0.4 KW. Servo driven. Last used to feed coupons 95 x 74 mm at a speed of 120 coupons/minute.
spindle diameter: 160 mm x-travel: 10.000 mm y-travel: 3.000 mm Control: ICEM 402 total power requirement: kW weight of the machine ca.: 80 t dimensions of the machine ca.: m Stocknumber 1210050 Type of machine CNC Floortype Boring Machine Make SKODA Type W 160 CNC Build in 1974/retrofitted in 2002 Type of control ICEM 402 Spindle diameter 160 mm X-stroke (mm) 10.000 Y-stroke (mm) 3.000 Z-stroke (mm) 1600 W-stroke 1250 mm Speeds (Rpm) 1 - 1.200 Feeds (mm/R) 0,5 - 8.000 mm/min. Rapid feeds 8.000 mm/min Total Power (KW) 180 KvA Weight 80 ton The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We offer you a used levelling plate here. Technical data for the compensating plate: Manufacturer: Bito, Type PRO Suitable for the base plate L; which are mounted on the shelf stand P1-P3. The scope of delivery includes: 01x Compensating plate, used Material colour: sendz. galvanized Total width: approx. 120 mm Total depth: approx. 105 mm Material thickness: approx. 0.5 mm Hole spacing (center - center hole): approx. 95 mm Weight: approx. 0.05 kg | Piece Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
spindle diameter: 100 mm x-travel: 1200 mm y-travel: 800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 5,6x3,4x3,x7 m Brand: Femco Type: WBT-100SR2 CNC brand: Mitsubishi CNC model: Meldas C3 Year of make: 1995-05 Facing support Table length: 1.440 mm Table width: 1.600 mm Spindle diameter: 100 mm ø Machine dimensions (lxwxh): 5.680 x 3.400 x 3.700 mm incl. right-angle milling head type Huron The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 1400 mm grinding length: 3500 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1310013 Type of machine Super finishing machine Make NAXOS UNION Type WT 140/3500 Build in 1975 Max. grinding diameter 1400 mm Max. grinding length 3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
General Manufacturer: Spinner Type: U5-1520 Year of Make: 2012 Control: Heidenhain TNC 620 Travel X/Y/Z: X 1,520 mm Y 520 mm Z 460 mm Travel C-axis: 360° B-axis travel: -5°(-50°)/+130° Rapid traverse: 48 m/min Spindle Spindle speed: 12,000 rpm Tool changer: 32-fold Work table Table load: Max. 300 kg Table dimensions: 720×540 mm Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Portable Handwheel HR410 TNC620 Option "Software option 2" TNC620 Option "Software option 3" Glass scales in X/Y/Z Preparation for high-pressure flushing Preparation of the interface for Blum infrared probes
spindle diameter: 160 mm x-travel: 15000 mm y-travel: 4000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1210060 Type of machine Floortype Boring machine Make SKODA Type W160HC Build in 1990 Spindle diameter 160 mm X-stroke (mm) 15.000 Y-stroke (mm) 4.000 Z-stroke (mm) 1.600 W-stroke 1.250 Tool Taper Iso 50 Additional information With 3 floorplates 1880x5615 mm en 3x 1880x6400 mm 3 millingheads and 1 support 1 rotarytable Skoda S-35 C, 35 ton 2800 x 3150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 140 t chamfer lenght: 3000 mm distance between columns: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 2010012 Type of machine Pressbrake Make COLLY Type 3000/140 Build in nb Chamfer lenght 3000 mm Pressure 140 ton Stroke 250 mm Throat 310 mm Daylight 520 mm Additional information incl. 1 set of tooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 14.000 mm y-travel: 1.500 mm z-travel: 3.000 mm Control: Heidenhain Itnc 530 total power requirement: 50 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1110049 Type of machine CNC floortype milling machine Make FPT Type Spirit 130 Build in 2012 Type of control HEIDENHAIN TNC Itnc 530 X-stroke (mm) 14.000 Y-stroke (mm) 1.500 Z-stroke (mm) 3.000 Speeds (Rpm) max. 4.000 Admission in spindlehead Iso 50 Rapid feeds max 25.000 mm/min Additional information Program run 9655 hour The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
; Gross weight [kg]: 1522; Engine: Caterpillar C7.1; Accessories: Control Panel, Double walled fuel lines, Keelcooled, Voltage (V): 24
Kubota V 1902, 4-cyl. Diesel engine, water-cooled, 1861 cc displacement, used machine, from 200 operating hours, several available. Other diesel engines 1-6 cyl., various makes: Deutz, Daedong, Farymann, Hatz, Iseki, Isuzu, Komatsu, Kubota, Lombardini, Perkins, Shibaura, Ruggerini, Yanmar etc. Output from 4.5 – 100 kw, used, partly as good as new. Gasoline engines: 1-2 cylinders of 3-15 kw from B&S, Honda, Kohler, Robin, Wisconsin. Various radiators, starters, alternators and silencers in stock, various hydraulic pumps and hydraulic motors. ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping and disposal, environmental care, engines and more...
This mixer is used but has been cleaned and tested This HL662-1STD is ideal for commercial kitchens thanks to its 60 qt. bowl, stainless steel bowl guard, and dough hook. With an ergonomic design and superior functionality, you can make repeat recipes consistently and create new ones with ease and efficiency. This unit requires a 200/240V electrical connection for operation. Ergonomic Swing-Out Bowl Featuring an ergonomic swing-out bowl, this mixer makes it easy to load and unload ingredients. With a single point bowl installation, you can easy mount or remove the bowl as needed. Plus, the bowl interlock ensures that the mixer bowl is properly in place before the mixer will operate for added safety. Dough Hook This mixer comes with a (1) "ED" dough hook so you can mix up to 90 lb. of dough at once. The 2.7hp motor, gear transmission, and safety mechanism system provide plenty ...
turning diameter over bed: 560 mm turning diameter over slide rest: 355 mm turning length: 1500 mm spindle bore: 80 mm spindle turning speed range: 25 - 1600 U/min turning dia. in gap: 785 mm metric threading: 0,2 - 14 mm thread - inch: 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 130 mm quill stroke: 120 mm total power requirement: 7,5 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,8 x 1,20 x 1,5 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 jaw chuck 4 jaw ...
cutting diameter: 1020 mm saw band length: 9500 mm cutting width: mm Control: total power requirement: 7,5 kW weight of the machine ca.: 7 t dimensions of the machine ca.: 4500 x 1700 x 2750 mm Brand: BMSY Type: 1020C Year of make: 2019 Capacity round 90º: 1.020 mm ø Capacity square 90º: 1.020 mm Capacity rectangular 90º: 1.020 x 1.020 mm Mitre: 45 ° Working height: 535 mm Saw blade dimension: 9.500 x 54 x 1,6 mm Saw motor: 7,5 kW Machine dimensions (lxwxh): 4.500 x 1.700 x 2.750 mm Machine weight: 6.950 kg Clamp: 1 x 45 ° adjustable Hydraulic clamping including top clamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
For sale is a used pelleting line that has been pelletizing wood fiber-based fertilizer with cattle manure and digestate for the past four years (approximately 5,000 hours total). It incorporates components from various well-known manufacturers, including the Amandus KAHL pellet press/continuous mixer, Bühler hammer mill/conditioner, CPM pellet cooler, Wynveen pellet screen, and Rako/Apullma conveying technology. Capacity: 1. Wood chips with dried cattle manure: approx. 1.5 t/h 2. Dried, separated compost/dried digestate: approx. 2.5 t/h 3. According to the manufacturer, KAHL, the press can process up to 3 t/h of biomass. The customer is now restructuring their operations, making this line available for sale. The preferred option is to sell the entire line, but individual components can be purchased separately by arrangement. The customer is primarily seeking to sel ...
Submersible pump, TA160/350-G+131, Brinkmann Pumps, mint condition Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, - has some storage marks due to the long storage period, Technical data: - 220L/min, 2m, - 240/400V 0,5KW, - Immersion depth 350mm, - Flange outer diameter 180mm, - Pitch circle diameter 160mm z=4, - 58x22x18cm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. ...
1000 litre bottom flap mixer with ploughshares 3 kw-67 rpm Chain drive
Hydrovar + motor without pump, HV3.3 f/120c + LM100RBM14/330, Lowara, used Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law app ...
maximum number of results exceeded
please refine your search
