mac used for sale

This 4-axis ANAYAK CORREA XPERTA 25 was manufactured in 2015. It features an impressive X-axis travel of 2,500 mm, Y-axis travel of 1,000 mm, and Z-axis travel of 1,000 mm. The machine includes a robust table size of 2,800 × 1,000 mm and a maximum table load of 6,500 kg. If you are looking to get high-quality machining capabilities, consider the ANAYAK CORREA XPERTA 25 vertical machining centre we have for sale. Contact us for further details.

This 3-axis DOOSAN DNM 6700L was manufactured in 2021. It features an impressive X-axis travel of 1,500 mm, Y-axis travel of 670 mm, and Z-axis travel of 625 mm. The machine is equipped with a 30-position tool magazine and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 6700L vertical machining centre we have for sale. Contact us for further details.

CENTRO DI LAVORO KIA V25- ANNO 2005, CNC FANUC 0i-MB PALLET:2 UTENSILI SORAGE: 16 STAZIONI MANDRINO BT30 Giri/min: 10000 TABELLA:500X300X500 FULL DI MANUALI E ATTREZZATURE. MACCHINA MOLTO VELOCE e veloce da equipaggiare. COLLEGATA ALL'ALIMENTAZIONE IN PRODUZIONE.

Laser Prima Industrie CP 4000 3000x1500 4000W Anno 2006 Ore lavoro circa 30 mila No carico/scarico Piano doppio Revisionato Visibile in funzione

This 4-axis DOOSAN DNM 5700 was manufactured in 2021, 3 units available. It features an impressive X-axis travel of 1,050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine is equipped with a 30-position tool magazine and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details.

This Plasma Cutting Machine was manufactured in 2014. It features a Hypertherm HyPerformance® HPR260XD plasma source and Hypertherm EDGE® Pro CNC control. The table size is 3000x1500mm, and it uses TurboNest® CAD/CAM software. It can cut black steel up to 38mm, stainless steel, and aluminum up to 25mm. A great opportunity to buy this ERMAKSAN ER 4000 Plasma Cutting Machine. For more information about this Plasma Cutting Machine, please reach out to us.

ORT 3RP48 CN CNC / PLC thread rolling machine scaffolding sleeves threading, shelves studs threading electronic overhaul/retrofit Under power in our warehouse in Gussago BS. Test run possible Mimu Machine Tools

MAX DIAM 400, MAX MODUL 8

KORRADI UW 10 with Heidenhain equipment, details see pictures, immediately available

GeneralUniversal machining centre; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal1000 mmCross1250 mmVertical1000 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minChip removalChip removal: 2 worm conveyors in the machine bed convey into a chip conveyor (scraper flight conveyor), with interval control, placed at right angles. discharge height: 950 mm / 37.4 in width: 380 mm / 14.9 in NC rotary table with pallet changerType of Measuring system Direct measuring system Table surface 1000 x 800 mmCentre bore 50H6 mmMaximum load (table centre) 2000 KgSlot width 18 mmNumber of Slots 7 Distance between T-Slots 100 mmRotation speed max.4. Axis 35 rpm4. Axes (swivelling range) 360 x 0,001 degreeCabineFull protection cabin Uni. head with controlled B-axisUniversal milling head with c ...

General2-Axes Universal Turning Center with driven tools, C-axis, Y-axis and counter spindle - Direct measuring system for X / Y axis; Control: DMG MORI SLIMline® 0i-F Plus on Fanuc Touch CNC Working areaSwing diameter over guide ways700 mmSwing diameter over transverse guideway370 mmTurning diameter400 mmBar diameter max.80 mmSlide 1Longitudinal stroke755 mmTransverse stroke276 mmY axis, vertical+/- 60 mmRapid traverse in X30 m/minRapid traverse in Z30 m/minRapid traverse in Y22,5 m/minMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range - 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)426 NmWork spindle (left)Spindle noseA2-8 Bar diametre80 mmSpindle diametre on front bearing130 mmMain drive 2Drive power (100% DC)13 kWDrive power (40% DC)14 kWSpeed range- 5000 rpmTorque (100% DC)171 NmMax. torque (40 ...

Diosna spiral kneader SPV 160 AD with 2 extendable boilers For a maximum of 160 kg of dough per bowl Kneading tool made of stainless steel Including two stainless steel shells Timer with two clocks Two speeds Friction wheel drive Condition: obsolete; checked and cleaned

Universal milling machine Deckel FP1 Machine Operating voltage: 380/400 volts without feed in y direction, with angle table, work surface with 4 T-slots Condition see pictures Errors excepted!

Horizontal turning machine manufactured in 2014. This Okuma LB3000EXII features a maximum turning diameter of 340 mm and a turning length of 1,000 mm. It has a swing over bed of 580 mm and a maximum workpiece weight of 250 kg. If you are looking to get high-quality turning capabilities, consider the Okuma LB3000EXII machine we have for sale. Contact us for further details.

It is a used, reconditioned Fortuna bun press semi-automatic size 3 (30 pieces) for sale. The bun press is in top condition, fully functional and runs very quietly. A new knife rack was installed. The engine was re-mounted and a new main switch was installed. The machine was repainted. The weight range of the machine is 32gr. - 70gr. per piece of dough (30 pieces). If dough pieces are only pressed and cut, a higher weight range is possible. Incl. 3 x plates (further plates on request). Price on request.

Travel distances: 320 x 250 x 220 mm [ X x Y x Z ] workpiece size X: 780 mm workpiece size Y: 570 mm workpiece size Z: 200 mm workpiece weight: 350 kg with automatic wire threading U/V axis: 80 mm x 80 mm  Cutting in a water bath Conicity: +/- 15° at 120mm

Horizontal turning machine manufactured in 2017. This HAAS ST-30 features a swing capacity of 806 mm and a maximum cutting diameter of 533 mm. It is equipped with a 12-station tool turret and a spindle speed of 3,400 RPM. If you are looking to get high-quality turning capabilities, consider the HAAS ST-30 machine we have for sale. Contact us for further details.

This 3-axis HAAS VF-5/50XT was manufactured in 2023. It features an impressive X-axis travel of 1524 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine includes a robust table size of 1575 x 584 mm and a maximum table load of 1814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-5/50XT vertical machining centre we have for sale. Contact us for further details.

Spiral kneader with vat trolley Diosna SP 240 AD Incl. 3 vat trolleys 2 speed, traditional control Power in dough: 200 kg Vat diameter: 900 mm Friction wheel drive Pliers locking

Graule AKF 6/250 - Year of construction 1999 - Engine brake - very good condition - technically tested and fully functional

This 5-axis HAAS UMC-750 was manufactured in 2025. It features an impressive X-axis travel of 762 mm, Y-axis travel of 508 mm, and Z-axis travel of 508 mm. The machine is equipped with a maximum spindle speed of 12,000 rpm and a tool capacity of 30+1. If you are looking to get high-quality machining capabilities, consider the HAAS UMC-750 universal machining centre we have for sale. Contact us for further details.

This 3-axis HAAS VF-1YT-1 vertical machining center was manufactured in 2009. It features an X-axis travel of 508 mm, Y-axis travel of 406 mm, and Z-axis travel of 508 mm. The machine includes a robust table size of 660 x 457.2 mm and a maximum table load of 1,361 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-1YT-1 vertical machining center we have for sale. Contact us for further details.

This 3-axis HAAS GR-712 was manufactured in 2010. It features an impressive X-axis travel of 3,683 mm and Y-axis travel of 2,159 mm, providing a robust working area with table dimensions of 3,658 x 1,829 mm. The machine is equipped with a maximum spindle speed of 10,000 rpm and an ATC capacity of 20 stations. If you are looking to get high-quality milling capabilities, consider the HAAS GR-712 gantry milling machine we have for sale. Contact us for further details.

SPECIFICATIONS: Automatic drilling and dowel insertion machine with horizontal loading and unloading system, consisting of: Loader: ESSEDUE CNC transverse drilling machine: Biesse FTT Year of construction 2003 4 upper drill heads with automatic change of vertical drills 2 X-axes 4 Y-axes 4 electrospindles with automatic tool change A total of 12 slots for tool changes Inline transverse plate turner for double-sided drilling CNC transverse drilling machine: Biesse FTT Year of construction 2004 2 upper drill heads with automatic change of vertical drills 1 X-axis 2 Y-axes Biesse FHT Transversal Drilling and Dowel Insertion Machine Year of construction 2004 High pressure bonding system: Csnpgoz93 5 + 5 injectors Large vibrating baskets with dowels ESSEDUE unloader with additional transverse outlet for individual panels

Hand sealing machine for sample packaging blister Sealing jaws can be triggered with pneumatic foot switch. Temperature and sealing pressure adjustable. Sealing of one side at a time, max. 150mm width, sealing pattern see picture.

SUMAB R-500 MAX Fully automatic block line with concrete batching plant. Block line is in stock and ready for delivery! Technical details: • Automatic control model (with automatic operation equipment, including PLC, sensors, hydraulic valve's switching from manual to electrically operated) • Working pallet dimension: 1400 x 700 mm. • Operation area Max.: 1300 x 650 mm. With the SUMAB R-500 stationary block machine, the following concrete products can be produced in an efficient way: hollow blocks, insulated blocks, paving stones, curb stones and others. Production capacity in 8 h/100%: Hollow blocks: 12960 pieces (20x20x40 cm) Paving stone: 864-1016 m2 (10x20x6 cm)

Labeler prepared for 3x adhesive labels with hot melt (front/back/safety tab). The labeller was overhauled in 2021 by the manufacturer Gernep, including new electrics according to CE standard. The labeller is equipped for the glass type DTO80. The labeller was in operation for about 200 hours after the overhaul.

This 3-axis HAAS VF-1YT-2 was manufactured in 2013. It features an X-axis travel of 508 mm, Y-axis travel of 406 mm, and Z-axis travel of 508 mm. The machine includes a robust table size of 660 x 457.2 mm and a maximum table load of 1,361 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-1YT-2 vertical machining center we have for sale. Contact us for further details.

This 3-axis HAAS GR-510 gantry milling machine was manufactured in 2016. It features an impressive X-axis travel of 3,073 mm and Y-axis travel of 1,549 mm, with a robust table size of 3,099 x 1,346 mm. The machine has a maximum weight capacity of 2,722 kg on the table. If you are looking to get high-quality milling capabilities, consider the HAAS GR-510 machine we have for sale. Contact us for further details.

This 3-axis HAAS VF-1YT-3 was manufactured in 2017. It features an X-axis travel of 508 mm, Y-axis travel of 406 mm, and Z-axis travel of 508 mm. The machine includes a table size of 660 x 457.2 mm and a maximum table load of 1,361 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-1YT-3 vertical machining centre we have for sale. Contact us for further details.

This 4-axis DOOSAN DNM 6700 XL was manufactured in 2021. It features an impressive X-axis travel of 2,100 mm, Y-axis travel of 670 mm, and Z-axis travel of 625 mm. The machine is equipped with a FANUC i-Series CNC control and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 6700 XL vertical machining centre we have for sale. Contact us for further details.

width of the strips: 75 mm band length: 2000 mm band speed: 30 - 34 m/sec total power requirement: 4,1 HP weight of the machine ca.: 75 Kg dimensions of the machine ca.: 1,2 x 0,5 x 0,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Continuous/standard drilling capacity (mm) 20/23 (in E335/ST60) Thread cutting capacity (depending on pitch) M12 Spindle MK II Drilling depth (mm) 100 Projection (mm) 240 Column diameter (mm) 82 Usable work surface (W x L) (mm) 340 x 280 T-slot size (arm), distance (mm), dimension width (mm) Number 2, 125, 13/26 Speed display digital Digital drilling depth display Drilling depth stop quickly adjustable stop ring Feed (mm/revolution) by hand Table height adjustment with rack Motor three-phase current 400V with frequency converter (kW) 1.5 Spindle/work surface distance (mm) 160 – 880 Machine dimensions without packaging (mm) 355 x 705 x 1825 Machine dimensions with packaging (mm) 572 x 936 x 2142 Weight (kg) 195 Standard accessories: Thread cutting device Control panel with OLED display Robust, high-quality drill head hood with ergonomically inclined front LED li ...

CO2 2d laser Model MAZAK NTX48 Champion Year 1999 Hours worked 53052 Power 1500 watts Hybrid type axis movement (X axis table movement, Y and Z axis head movement) X-axis longitudinal travel 2650 mm Y-axis transverse travel 1270mm Z-axis travel 100mm Machinable dimensions 2500x1250mm Head with capacitive sensor Mazatrol L-32B CNC Control Maximum machinable thicknesses with 5-inch head now supplied --6.0mm iron -3.0mm stainless steel -2.5 mm aluminum (with 7.5 inch head Iron 12.0mm Stainless 6.0mm theoretical) External dimensions: Length 5563mm

CO2 laser cutting machine manufactured in 2014. This Bystronic ByAutonom 4020 features a powerful ByLaser 6000 with a cutting range of 4090 mm x 2060 mm x 80 mm. It has a maximum workpiece weight of 1580 kg and can handle sheet thicknesses of up to 25 mm for steel and stainless steel. If you are looking to get high-quality cutting capabilities, consider the Bystronic ByAutonom 4020 machine we have for sale. Contact us for further details.

Kneader Kemper F125 SL Kneading Machine Menger -Lifting kneader with fixed boiler -for max. 200 kg dough or .max 125 kg flour -with 2 speeds -Stainless steel boiler and lifting arm -with flour dust cover -Boiler diameter inside 90cm -Boiler height inside approx. 50cm -can be used on wheels with 2 locks

Dear customers currently we offer you a refurbished columns or column drilling machine from F. Zimmermann for sale. The special feature of the machine is the work table adjustable in 3 levels. Here are the other technical data of the machine: Speeds: 100 - 2,250 rpm Work light MK3 recording (new) Swivel radial: 360° Swivel axisial: 2x 90° Quill stroke: 160 mm Projection column spindle center: 500mm Table: 490 x 400 mm Centering disc Ø: 55 mm H7 working height swivel table: 715 mm working height base plate: 1,215 mm Base plate and table with T-slot 12 mm Dimensions: 600 x 1,120 x 1,930 mm Power: 1.5 kW Weight: approx. 500 kg After the overhaul, the machine has a completely new electrical system including engine brake, is painted light grey in RAL 7035 and comes with a drill set. We look forward to your questions and inquiries! If you have any questions, please ...

Counter: number sets: 2092702 // sheets: 2102565 // stapling: 1807398 // folds: 2022952 // cuts: 1763900 Equipment: 2xTOWER BST10 / BST 10 (each 10 stations) M.No.: 02 01 4 1834 M.No.: 02 11 4 1769 BDF M.No.: 40 12 4 1046 Two spare wire stitching heads included

ARBURG 270 S 150-60 U ALLROUNDER MACHINE WAS FULLY SERVICED NOT LONG AGO WITH NEW SCREW TECNICAL DATA IN LIST -PHOTO EUROMAP 150-60

This SEI MERCURY 603 1520 350kW Laser cutting machine was manufactured in the year 2007 in Italy. The machine has a laser power of 350 kW.

This Bystronic BySprint Fiber 6520 was manufactured in 2016. It features a 6 kW laser power, handling work table sizes up to 6500 mm x 2000 mm. It efficiently processes materials like carbon steel, copper, and brass. The CNC control system, BYSTRONIC ByVision, includes a touchscreen and remote control for cutting parameter adjustments. Consider the opportunity to buy this Bystronic BySprint Fiber 6520 fiber laser cutting machine. Contact us for more information about this machine.

Dear customers currently we offer you a used disc or disc grinding machine for model and mold making of the brand HoPa. Here are the technical data of an S 650 machine: Disc diameter: 600mm Table length: 950 mm Table width: 470 mm Table working height: 900 mm Table swivel: 30/45° Schraegan stop: 60/60° Power: 2.2 kW Speed: 1,000 rpm Right-left rotation Emergency stop with engine brake Dimensions: 110 x 85 x 140 cm Weight: 315 kg Documentation incl. CE and declaration of conformity available! Accessories such as inclined stops, adhesives and grinding wheels included. We look forward to your questions and inquiries!

WELIDING WORK STATION SCHLATTER WITH NEW MIYACHI WELDING CONTROLS. 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS 2. AWAILIBLE Included with safety glass and two button pust operational system. with all safety system integrated and working table. WELDING NOMINAL POWER - 56 kWA AT 50% THROAT IN 450mm

This 3-axis ECKERT JANTAR 2 plasma cutting machine was manufactured in 2010. It features a working table dimension of 6,000 × 3,000 mm and a material thickness range of 3–100 mm, depending on the cutting process. The machine is equipped with a Hypertherm HPR130 plasma cutting system, ensuring efficient operation. If you are looking to get high-quality cutting capabilities, consider the ECKERT JANTAR 2 machine we have for sale. Contact us for further details.

Travels X/Y/Z: 1020mm/610mm/610mm, table dimensions X/Y: 1300mm/600mm, max. table load: 900kg, spindle taper: SK40, spindle speed: 12000rpm, tool positions: 30, control: Heidenhain iTNC 530, machine operating hours: 27500h, spindle operating hours: 12700h. Including 3D touch probe, through-spindle coolant at 20bar, additional external air cooling and scraper belt chip conveyor. The machine was used in single-shift operation.

Offered for sale is a vertical CNC machining center with tool changer. Control system: HAAS CNC control with operator monitor and keyboard. Equipped with automatic tool changer, machine table, enclosed work area, control pendant and tool cart with tool holders. Inspection possible by arrangement.

Travels X/Y/Z: 500mm/400mm/350mm, rotary table diameter: 400mm, spindle taper: SK40, spindle speed: 5000rpm, additional quill travel: 50mm, tool positions: 16, control: Philips 432, machine operating hours: 13400h. Including electronic handwheel and retrofitted LED monitor. The machine was used in single-shift operation. Documentation available. Inspection possible by appointment.

Interchangeable heads used, good condition 16 pcs. Interchangeable heads FK 11/13 devices, exchangeable at the top below. 1 Quickmelt incl. evaluation device level.

Eillert Salad spinner Model: MSD-500-V Serial: 188 2008, Stainless salad spinner, with three baskets, 1.5Kw, 3Ph

Spiral kneader Kemper ST 125 A + 2 boilers used spiral kneader Kemper ST 125 A extendable with 2 stainless steel boilers immediately available in the warehouse in Bielefeld. Trade-in and shipping costs on request. Type: SP 125 A with 2 boilers, optional extra boiler to purchase for max. 125 kg flour or for max. 200 kg dough with 2 automatic timers Boiler diameter 90cm -Bott capacity: 300 litres Boiler drive by friction wheel Boilers are manually locked extendable with 2 automatic timer relays 2 speeds fast and slow Flour dust cover Stainless steel spiral and tools Boilers are also made of stainless steel Machine is anchored in the ground with 2 screws Machine head moves up and down when the boiler is retracted and extended 400 volt power supply robust and stable machine Tested for function