mac used for sale

SECOND-HAND SANDING MACHINE FOR TURNED PIECES LOCATELLI MOD. ORIENTAL MATIK 1200 - With automatic loader - No. 2 abrasive belts -Brushes - No. 6 spindles - Working length 1200 mm

For sale is a workshop-overhauled notching milling machine from the renowned manufacturer Elumatec, type AF223, built in 1998. As part of the workshop overhaul, the machine was dismantled, cleaned and reassembled. It was almost completely repainted. The bearings on the spindle and motor were replaced. The plate was professionally sanded and galvanized. Other galvanized parts were also largely re-galvanized. The following new parts have been installed: - Pneumatic cylinders - Guide rails and linear layers - Clamping cylinders and rubber buffers - Protective cover - Hinged lid - Mudguard - Protective sliders on the right and left - Protective slider on the side with brush - Lever at the stop - Lever on the front spindle - Bearings on the spindle - Protective hose - Scale on the plate - Scale at the stop - Regulator - Oiler - Small parts (bearing sleeve, spindle sl ...

bore capacity in steel (diameter): 16 mm throat: 185 mm bore stroke: 50 mm : 20 mm spindle taper: MK 2 spindle diameter: mm spindle turning speed range: 100-1500 / 200-3000 U/min : 175 mm : 280 mm table surface area: 500 x 180 mm connected load frequency: 230 V total power requirement: 0,85 kW weight of the machine ca.: 0,12 t dimensions of the machine ca.: 0,86 x 0,6 x 0,9 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CATALOG NO. 6875 TECHNICAL DATA - inlet width 720mm - inlet height 160mm - thickness of the shredded material 160mm - roller width 720mm - shaft diameter 600mm - knife length 80mm - number of knives 4×12pcs - 25mm sieve dimensions - pressing roller at the input 0.75 kW - toothed shaft pulling from the bottom 1.8 kW - toothed shaft pulling from above 1.8 kW - length of the vibrochute 4470mm - width of vibrochute 710mm - 2.2 kW vibrating motor - main engine 55kW - autoreverse - diameter of the extraction spigot 260mm - dimensions of the vibro-chute length/width/height 4470/950/930mm - machine dimensions length/width/height 3100/1500/1170mm - total weight about 5500 kg – German production - very low mileage – original documentation – used chipper, very good / perfect condition Net price: PLN 169900 Net price: 36538EUR Net price calculated according t ...

faceplate diameter: 1130 mm swing diameter: 1500 mm turning height: 1100 mm faceplate diameter: mm swing diameter: mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: STANKO TYPEL 1512 Build in: 1977 with pneumatick 3-jaw stuck 1130 mm max. turning diameter 1500 mm max. turning height 1100 mm Motor 30 KW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General Description CNC cordon (weld seam) cleaning machine manufactured by URBAN GmbH & Co. , model SV 530 . Designed for automatic removal of excess weld material from PVC window and door frames after welding. Suitable for integration into automated PVC window production lines. Technical Details Manufacturer: URBAN GmbH & Co. Model: SV 530 Machine type: CNC cordon cleaning machine Machine No.: 530659 Power supply: 230/400 V, 50 Hz Installed power: 3.5 kW Control voltage: 24 VDC Protection class: IP54 Original URBAN CNC operator panel Automatic profile handling table Pneumatic system with pressure gauges Cleaning enclosure Integrated conveyor system Cable chain Automatic weld seam cleaning stations Condition Good used industrial condition. The machine appears complete with CNC control console, conveyor system, cleaning stations, pneumatic equipment and sa ...

Copy Shaper / Copy Lathe Brand: Geiger Model: 8CD Milling + Grinding Workpiece length max. 1500mm

Bosch PKS vacuum packing machine for coffee Packed in 250 g and 500 g packages Year 1994 / renovated in 2017 Good working condition

General Description Thermal break rolling machine manufactured by Schüco International KG , model ISOMAT 5 . Designed for rolling polyamide insulating strips into aluminium profiles to produce thermally broken window, door and curtain wall sections. Suitable for aluminium profile fabrication and façade production. Technical Details Manufacturer: Schüco International KG Model: ISOMAT 5 Machine type: Thermal break rolling machine Year: 1998 Article No.: 299563 Serial number: 792-125 Power supply: 400 V, 50 Hz Motor power: 1.1 kW Rated current: 3.0 A Multiple precision rolling stations Adjustable guide rollers Profile support/feed table Emergency stop Weight: 660 kg Condition Good used industrial condition. The machine appears complete with roller assemblies, guide rollers, feed table and safety guards installed. Original Schüco paint is present with normal cosmet ...

General Description CNC profile cutting and machining center manufactured by Schirmer Maschinen GmbH , model BAZ VU 90° . Designed for fully automated cutting and machining of PVC and aluminium window and door profiles. The machine forms part of an automated production line and is equipped with a Beckhoff PC-based CNC control system. Technical Details Manufacturer: Schirmer Maschinen GmbH Model: BAZ VU 90° Machine type: CNC profile cutting and machining center Year: 2020 Machine No.: 2344 900 Power supply: 400 V, 3-phase, 50 Hz Pneumatic supply: Max. 8 bar Beckhoff PC-based CNC control Touchscreen HMI Automatic profile infeed and outfeed roller conveyors Integrated cutting, drilling, milling and routing units CE marked Approximate machine weight: 4,000 kg Condition Very good used industrial condition. The machine appears complete and remains installed in a clean p ...

- Pallet feeder FP 95 incl. VACULIFT III - MC Control - 1. Station 4 Niro fold buckles - Perforating, creasing and cutting deivce parallel fold - KL- und SUPER KTL-Version with 2 knifes - Vertical Stacker SBAP 46-ME, Bj. 2016 - Stream delivery ASP 66-2ME, Bj.2012

x-travel: 1200 mm y-travel: 600 mm z-travel: 600 mm table-size: 1300 x 600 mm max. workpiece weight: 2000 kg spindle taper ISO: 50 spindle turning speed - stepless: 30 - 3500 U/min feeds -stepless-: 1 - 6000 mm/min rapid traverse: 10 m/min power capacity - milling spindle: 18 kW max. torque on the spindle: 500 Nm distance work spindle /surface of the table: 267 - 867 mm distance table-vertical head: 58 - 658 mm voltage: 380 V / 50 Hz control voltage: 230 V total power requirement: 22 kW weight of the machine ca.: 6,5 t dimensions: 3,6 x 4,2 x 2,3 mm • CNC control DR. HEIDENHAIN TNC 360, • hydr. tool clamping attachment • electr. handwheel, • vertical head manually tiltable, • coolant device, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General Description Vertical glass washing and drying machine manufactured by Triulzi S.r.l. . Designed for automatic washing and drying of flat glass prior to insulating glass production, tempering, lamination and other architectural glass processing. Suitable for continuous industrial operation. Technical Details Manufacturer: Triulzi S.r.l. Machine type: Vertical glass washing and drying machine Maximum glass height: 3,000 mm Vertical washing and drying configuration Roller conveyor transport system High-efficiency air-knife drying system Industrial electrical control panel with operator interface Suitable for float, coated, laminated and Low-E glass Condition Good used industrial condition. The stainless-steel structure appears complete with straight panels, intact roller conveyor system and access doors. The machine remains installed in an industrial production envi ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS X with HEIDENHAIN TNC7 Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/mininlineMASTER® spindlespeed range 20 - 15.000 min-1 SK40 suitable for BIG-PLUS® tools Drive power (100% DC) 14,5 kWDrive power (40% DC) 20,3 kWTorque (100% DC) 84 NmTorque (40% DC) 121 NmSpeed range 20 - 15000 rpmSpindle taper SK40 Tool holder DIN ISO 7388-1-A Clamping System DIN ISO 7388-3-A, AD Tool clamping for HSK-A63Tool clamping HSK-A63 according DIN 69893 (incl. adaptation working spindle and tool magazine) NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring sys ...

The Diosna SP 160D mixer is suitable for every test. Reliability and German quality are the main advantages of Diosna mixers. Two-speed spiral dough mixer. The bowl and dough kneading organ are made of stainless steel. Technical data: - stainless steel base and spiral, - protective lid with safety switch, - max. flour quantity: 100 kg, - max. dough quantity: 160 kg, - 2 speeds; 2 timers, - electromechanical control panel, - automatic changeover from first to second speed, - reverse rotation for easy cleaning. Warranty on all parts - 6 months. Call and arrange a demonstration of the machine!

Those dough dividers and rounders allow you to make 30 identical products in 1 work cycle. The products can be cut into pieces or rounded - depending on your needs! Weight ranges: Fortuna 3: 32-80 g Fortuna 4: 40-110 g Both machines are available both in semi- and in full automat. If you have any questions, don't hesitate to contact me via phone, mail or whatsapp!

GeneralCNC Turning Centre with C axis and tool drive; Control: M730BM with MAPPS IV CharacteristicsMax machining diameter356 mmMax. Turning Length510 mmSwing- Ø, max.755 mmBar diameter max.65 mmSpeed max.-5000 rpmNumber of tool stations20 Rotary tool spindle speed10000 rpmMovements X / Z260/590 mmInput precision of C-axis on Mainspindle0,001 degreeRapid feed X / Z30/30 m/minDrive power main spindle15/15/11 kWDrive power tool spindle5,5/5,5/3,7 kWDimensions (L x W x H)2,82 x 2,09 x 2,15 mWeight approx.5000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p (Spindle 1) Standard spindle 15 / 11 kW, 5,000min-1(Spindle 1) Standard Spindle 15/11 kW (20/15 HP), 5,0 ...

GeneralCNC Turning Centre with C and Y axis and tool drive; Control: Control M730UM with CELOS CharacteristicsMax machining diameter356 mmMax. Turning Length510 mmSwing- Ø, max.755 mmBar diameter max.65 mmSpeed max.-5000 rpmNumber of tool stations12 Rotary tool spindle speed10000 rpmMovements X / Z260/590 mmInput precision of C-axis on Mainspindle0,001 degreeRapid feed X / Z30/30 m/minDrive power main spindle15/15/11 kWDrive power tool spindle5,5/5,5/3,7 kWDimensions (L x W x H)2,82 x 2,09 x 2,15 mWeight approx.5000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p (Spindle 1) Standard spindle 15 / 11 kW, 5,000min-1(Spindle 1) Standard Spindle 15/11 kW (20/ ...

This 4-axis DMG MORI CLX 550 V4 was manufactured in 2020. It features a turning length of 1,225 mm, X-axis travel of 307.5 mm, and Z-axis travel of 1,240 mm. The machine is equipped with live tools, a spray gun, a hand wheel, and a tool setter. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 550 V4 horizontal turning machine we have for sale. Contact us for further details.

Rheon VX is a series of stress free dividers, which can divide most of doughs - even extremely moist. From rye tin bread to italian ciabatta flat bread (see photos for examples and our test products). The machine has been fully renovated in 2020 and is ready for work! Weight range: One row: 100 - 2000 gr two rows: 30 - 1500 gr Length range: 75 - 999 mm Max. cutting speed per row: 20 cuts per minute. If you find the machine interesting, let me know via phone, mail or whatsapp!

This 3-axis FEHLMANN PICOMAX 80 CNC-W 2/3 was manufactured in 2005. It features a spindle speed range of 50 - 9,200 rpm and a maximum torque of 80 Nm. The machine offers a travel of 700 x 315 mm in the X and Y axes, with a vertical adjustment of 495 mm. If you are looking to get high-quality machining capabilities, consider the FEHLMANN PICOMAX 80 CNC-W 2/3 vertical machining centre we have for sale. Contact us for further details.

This 3-axis Matsuura H.PLUS-300 was manufactured in 1997. It features a maximum spindle speed of 15,000 rpm and impressive travels of 500 mm in both the X and Y axes, with a Z-axis travel of 480 mm. The machine is equipped with an automatic tool changer that holds 80 tools and includes coolant in the spindle. If you are looking to get high-quality machining capabilities, consider the Matsuura H.PLUS-300 horizontal machining centre. Contact us for further details.

used spiral kneader Eberhardt Maximat MAAN 160 extendable, completely overhauled, 160 kg dough, 2 watches, with 2 stainless steel boilers, stainless steel spiral, many new parts, new friction wheel, new lifting cylinder, electrics renewed, 380/400 V, 3 phases, 50 Hz, 19.5 A, spiral 7.8 kW, boiler 0.75 kW

Sollas SB 380 stretchbanding machine, pack size min. 50 x 15 x 20 mm (LxWxH), max. 210 x 250 x 150 mm (LxWxH), capacity up to 30 single or bundle packs per minute.

Reference Num.: 4480 Brand: Heidelberg Type: SM 52-6-P3+L Construction year: 2002 Impressions: 152 mio Available: 15.01.2027 Status: In production Location: Europa Printing units: 6 Equipment: - Lackiersystem - CP 2000 - Wendung 2:4 / 6:0 - Alcolor - Wascheinrichtung - IR Trockner

Suitable for any test. Reliability and German quality are the main advantages of Diosna kneading machines. Two-speed spiral dough mixer. The bowl and kneading organ are made of stainless steel. • Dimensions: 850x1300x1250mm, • stainless steel base and spiral, • power 5 kW; power supply 400 V, • max. quantity of flour: 75 kg, • max. dough quantity: 120 kg, • 2 speeds; 2 timers, • electronic control panel, • automatic transition from first to second speed, • reverse rotation for easy cleaning

Reference Num.: 4481 Brand: Polar Type: N 92 PLUS Construction year: 2020 Available: 15.01.2027 Status: In production Location: Europa Cutting Size: 920 mm Equipment: - Programm - Lichtschranke - Lufttisch - Seitentische - Polar Rüttler - Palettenheber / Stapelheber

Suitable for any test. Reliability and German quality are the main advantages of Diosna kneading machines. Two-speed spiral dough mixer. The bowl and kneading organ are made of stainless steel. • Dimensions: 850x1300x1250mm, • stainless steel base and spiral, • power 5 kW; power supply 400 V, • max. quantity of flour: 75 kg, • max. dough quantity: 120 kg, • 2 speeds; 2 timers, • electronic control panel, • automatic transition from first to second speed, • reverse rotation for easy cleaning

A Belotti 5-axis CNC gantry milling machine is offered. Travels X/Y/Z: 12000mm/3000mm/2000mm, C-axis: +/-200°, A-axis: +/-115°, milling head: Cytec, spindle power: 20kW, torque: 48Nm in S1, max. spindle speed: 24000rpm, control: Siemens 840D. Documentation available. Inspection possible by arrangement.

format 46 x 66 cm Year of construction 2003 Flat stack feeder Vacustar 1st station: 4 folded sheets downstream knife shaft Noise insulation hood Counting device MS-Control without display Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Key data: 4500 , 1300 , 485

CNC machining center VEGA 5X 5 axis center

• Machine length: 13,300 mm • Machine width: 3,300 mm • Web width: 600 mm • Operating voltage: 200 VAC, 50/60 Hz, 3-phase • Power rating: 62 kVA • Current: 179.1 A • Maximum output with stacking system: 180 cycles/min • Main operating side: left-hand side in the direction of travel Production Capabilities: • Three-side-sealed pouches • Stand-up pouches with elliptical bottom (Doypack) • Pouch width: 60–250 mm • Pouch length: min. 110 mm, max. 270 mm (two lanes), max. 540 mm (single lane) • Bottom gusset: 40–90 mm (extended, including edge trim) • Processable materials: PP/PE, PET/PE, PET/ALU/PE • Film thickness: 80–250 μm Equipment: • Parent-roll unwinder with web edge control • Unwinder with winding shafts for 76 mm and 152 mm cores • Maximum clamping width: 1,200 mm • Maximum roll diameter: 800 mm • Bottom-gusset s ...

Suitable for any test. Reliability and German quality are the main advantages of Diosna kneading machines. Two-speed spiral dough mixer. The bowl and kneading organ are made of stainless steel. • Dimensions: 850x1300x1250mm, • stainless steel base and spiral, • power 5 kW; power supply 400 V, • max. quantity of flour: 75 kg, • max. dough quantity: 120 kg, • 2 speeds; 2 timers, • electronic control panel, • automatic transition from first to second speed, • reverse rotation for easy cleaning

Used Dunkes DF 350 punching machine/printing press Auction-ID: A1-50936-134

A high quality, technologically advanced machine designed for kneading dough. The mixer automates the process of kneading any type of dough to obtain a homogeneous mass. Technical data: stainless steel bowl and spiral, Max. flour quantity: 75 kg, max. dough quantity: 120 kg, 2 speeds; 2 timers, automatic changeover from first to second speed, inverted bowl rotation.

This 3-axis Okuma GENOS L3000-e (Mx450) was manufactured in 2022. It features a powerful 22 kW main spindle motor with a maximum speed of 3,800 rpm. The machine includes a V12 radial turret for milling, a chip conveyor, and a touch setter for tool presetting. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L3000-e (Mx450) horizontal turning machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 2000. This GILDEMEISTER NEF 320 features a robust control system by HEIDENHAIN. If you are looking to get high-quality turning capabilities, consider the GILDEMEISTER NEF 320 machine we have for sale. Contact us for further details.

This 3-axis DECKEL MAHO DMU 60 E was manufactured in 1998. It features an X-axis travel of 600 mm, Y-axis travel of 525 mm, and Z-axis travel of 500 mm. The machine is equipped with a 25-fold tool changer and a manually swivelable milling head, providing versatility for various machining tasks. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMU 60 E vertical machining centre we have for sale. Contact us for further details.

A high quality, technologically advanced machine designed for kneading dough. The mixer automates the process of kneading any type of dough to obtain a homogeneous mass. Technical data: stainless steel bowl and spiral, Max. flour quantity: 75 kg, max. dough quantity: 120 kg, 2 speeds; 2 timers, automatic changeover from first to second speed, inverted bowl rotation.

This 4-axis DOOSAN DNM650 was manufactured in 2010. It features a robust weight of 8500 kg and is equipped with a Fanuc Series control system. The machine includes a 4th axis rotary table unit mounted on the main table, enhancing its versatility. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM650 vertical machining centre we have for sale. Contact us for further details.

This 3-axis HERMLE UWF 1202 H was manufactured in 1994. It features an automatic tool changer and a robust net weight of 5,700 kg. The machine is equipped with a HEIDENHAIN CNC control and an enclosed linear encoder with a measuring length of 620 mm. If you are looking to get high-quality universal machining capabilities, consider the HERMLE UWF 1202 H machine we have for sale. Contact us for further details.

This 3-axis HERMLE UWF 802 M was manufactured in 1995. It has a total power rating of 6 kVA and operates at a voltage of 400 V. With a net weight of 1800 kg, this universal machining centre is designed for versatility in various machining applications. If you are looking to get high-quality machining capabilities, consider the HERMLE UWF 802 M machine we have for sale. Contact us for further details.

This 3-axis Leadwell MV-50i was manufactured in 2003. It features an X-axis travel of 1,267 mm, Y-axis travel of 632 mm, and Z-axis travel of 498 mm. The machine includes a table size of 1,417 × 607 mm and a maximum table load of 850 kg. If you are looking to get high-quality machining capabilities, consider the Leadwell MV-50i vertical machining centre we have for sale. Contact us for further details.

Harro Höfliger MKT 120 horizontal end load cartoner, intermittent motion, bucket infeed, with GUK FA21/4 Cartonac 91 leaflet feeder, glue closure with Nordson ProBlue 4 hot melt unit, minimum carton size 15 x 15 x 60 mm up to maximum 100 x 80x 200 mm, mechanical output up to 120 cartons per minute.

Ishida QX1100 Flex Tray Sealer  Fully automatic tray sealer. Twin lane configuration Suitable for mass production lines Has been packing layered salads in round bowls.

This 3-axis Proth PSGC-50120AHR surface grinding machine was manufactured in 2021. It features a table size of 500 x 1,200 mm and a maximum travel of 560 x 1,350 mm. The machine has a continuous table load capacity of 1,200 kg and includes a digital readout system retrofitted in 2022. If you are looking to get high-quality grinding capabilities, consider the Proth PSGC-50120AHR machine we have for sale. Contact us for further details.

Sweeper station wagon, probably ex Carraro consisting of front mounted sweeper, PTO drives with its own hydraulics, 3 disc brooms, coupling triangle holder, height-adjustable support wheel. Semi-trailer suction container, hydraulically operated, hydraulic tipping emptying, with elbow, without connecting hose and with semi-trailer chassis. The station wagon is from municipal pre-ownership, not tested and is sold as available as defective.

This 3-axis TRUMPF Trumatic L3050 was manufactured in 2003. It features a powerful TRUMPF TLF 5000 CO2 laser with a capacity of 5 kW, making it suitable for various cutting applications. The machine has been connected to power and is fully operational, with a history of maintenance ensuring reliability. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L3050 machine we have for sale. Contact us for further details.

This 3-axis LVD Orion 3015 Plus was manufactured in 2014. It features an X-axis travel of 3,000 mm and a table size of 1,500 × 3,000 mm, equipped with a powerful 2,500 W laser. If you are looking to get high-quality laser cutting capabilities, consider the LVD Orion 3015 Plus CO2 laser cutting machine we have for sale. Contact us for further details.

offer 22346 Specifications: - Cutting length up to 200 mm - Cutting thickness - steel up to 6 mm - Stainless steel up to 4 mm - infinitely variable cutting angle adjustment 30 - 135 ° - Stroke rate 60 1/min - Table support surface with T-slots 800 x 1000 mm - Depth stops with scale and angle adjustment - Table height 860 mm - Drive 400 V / 2.2 kW - E. - Foot switch - Space requirement approx. W 1000 x H 1650 x D 1700 mm - Weight approx. 1300 kg