maag gear used for sale

Gear motor, electric motor -Speed: 140 rpm -Power: 0.37kw -Construction: B3 angle -Diameter hollow shaft: Ø 24 mm -Protection class: -Number: 1x gear motor available -Dimensions: 360/160/H235 mm -Weight: 12kg

Gear motor, electric motor, electric gear motor -Speed: 5 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter hollow shaft: 25 mm -Protection class: IP 55 -Number: 1x motors available -Price: per piece -Dimensions: 570/160/H215 mm -Weight: 18.2 kg

Gear Motor with Inverter and Brake SEW KAZ97DT90L4BMGHR/MM15RA1A MOVIMOT MM15C-503-00 0,0,0,0 3 / 1.5 kW 1.6 / 8.0 rpm 380 - 500 V IP54 Hollow shaft diameter: Ø 70 mm with control (MOVIMOT) ! used, tested !' Dimensions: 770 x 400 x 420 mm

max. wheel diameter: 1250 mm gear width: 430 mm max. module: 30 min. module: 2 no. of teeth: 10 - 400 max.helical angle: 45 ° Stößelhublänge: 25 - 450 mm stroke position adjustment: 310 mm Doppelhubzahl - stufenlos: 70 - 190 U/min grinding wheel diam. min/max.: 290 - 400 mm table diameter: 1000 mm table load: 4000 kp dimensions of the machine ca.: 7,7 x 4,5 x 3,3 m total power requirement: 30 kW weight of the machine ca.: 28 t - Complete covering - Oil mist extraction - Coolant system - counter Holder - change Gears - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Geared motor, electric motor, electric geared motor -Speed: 14 rpm -Power: 0.37 kW -Design: B5 angle -Hollow shaft diameter: 28 mm Price: per piece -Quantity: 2 available -Protection class: IP 55 -Dimensions: 420/183/H210 mm -Weight: 16 kg

Gear motor, electric motor -Speed: 31 rpm -Power: 0.55 kW -Brake: 380 V -Construction: B3 angle -Diameter hollow shaft: Ø 25 mm -Protection class: IP 45 -Number: 1x motors available -Price: per piece -Dimensions: 510/228/H260 mm -Weight: 25 kg

Gear Motor with Inverter SEW R47DT71D4/MM03/BW1 MOVIMOT MM03C-503-00 0,0,0,0 075 / 0.37 kW 2.3 / 11.0 rpm 380 - 500 V IP54 shaft diameter: Ø 30 mm with control (MOVIMOT) ! used, tested !' Dimensions: 440 x 230 x 270 mm

Gear motor electric motor Electric gear motor -Speed: 46 rpm -Power: 0.75 kW -Construction: B3 angle -Diameter hollow shaft: 25 mm -Protection class: -Number: 1x motors available -Price: per piece -Dimensions: 410/225/H250 mm -Weight: 20 kg

Gear motor, electric motor, three-phase motor -Speed: 93 rpm -Power: 0.55 kW -Construction: B3 angle -Diameter hollow shaft: 24 mm -Protection class: IP 45 -Dimensions: 220/240/H525 mm -Weight: 23 kg

Geared motor VEM ZG3 KMRA 100 L 4 ( ZG3KMRA100L4 ) 4.0 kW 315 rpm 220 / 380 V IP44 Shaft diameter: Ø 48 mm Flange diameter: Ø 250 mm New !' Dimensions: 680 x 250 x 280 mm

max. wheel diameter: 380 mm gear width: 200 mm max. module: 6 min. module: Control: SIEMENS Sinumerik 840D working area: - max. gear diameter: 380 mm max. workpiece diameter: 400/ 600 (800) Außen innen beg max. gear width: 200 mm Center distance between gear head and table center: -50 / 450 mm Travel range of the lifting position: 250 mm Max. module for straight gearing: 6 mm Max. axial travel: 250 mm work table:: - table diameter: 400 mm table hole: 150 mm max. table speed: 30 1/m no. of T-slots: 6 St. Table equipped with hydraulic clamping device: - Multi-interface for pallet loading and zero-point: - clamping system in the working area: Shaping Head and Lift-off Cam:: - Drive power of face milling head: 37 kW Max. stroke rate: 600 DH/min Face milling head axis angle adjustment: +/- 0,5 ° spindle cone: HSK-B100 DIN 69893 taper of shaper cutter: 60 work-spindle diameter: 110 mm Stro ...

Gear motor electric motor Electric gear motor -Speed: 47 rpm -Power: 0.75 kW -Construction: B3 angle -Diameter shaft: 48 mm -Protection class: -Number: 1x motors available -Price: per piece -Dimensions: 415/210/H260 mm -Weight: 20 kg

Gear motor electric motor -Speed: 187 rpm -Power: 0.37 kW -with electrical separating coupling KEB type: Combibox -Construction: hollow shaft angle B5 -Diameter hollow shaft: Ø 19 mm -Protection class: IP 55 -Dimensions: 485/140/H180 mm -Weight: 12.2 kg

Gear Motor with Brake VEM ZGE3 BMRE 100 L8-4 ( ZGE3BMRE100L8-4 ) 1,1,02 3 / 2.2 kW 160 / 315 rpm 380 V IP44 shaft diameter: Ø 48 mm Flange diameter: Ø 252 mm 2 speeds ! New !' Dimensions: 600 x 252 x 340 mm

gear hobbing diameter - external: 1200 mm gear hobbing diameter - internal: 1200 mm gear hobbing width -max.: 260 mm control: Liebherr PC-NC max. workpiece diameter: 1500 mm table diameter: 900 mm table bore diameter: 320 mm max. table load: 95 kN power capacity: 30 kW coolant pump: 120 l/min Axial distance between thrust spindle - table: 0-820 mm Shaping spindle diameter: 125 mm tool taper: SK 45 DIN weight of the machine ca.: 26 t dimensions of the machine ca.: 8,073 x 6,183 x 4,375 m Strokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/min Equipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler - Technical documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, electric gear motor -Speed: 22.5 rpm -Power: 0.55 kW -Construction: hollow shaft -Diameter hollow shaft: 28 mm -Protection class: IP 54 -Dimensions: 530/200/H260 mm -Weight: 24 kg

Geared motor, electric motor, electric geared motor -Speed: 14 rpm -Power: 0.37 kW -Design: B5 angle -Brake: 380 V -Hollow shaft diameter: 24 mm -Protection class: IP 55 -Dimensions: 510/320/H300 mm -Weight: 18.4 kg

Geared motor with brake BAUER BS03-38H/DU05LA4-E/E003B4/SP 0.12 kW 27 rpm 400 V IP54 shaft diameter: Ø 14 mm Flange diameter: Ø 120 mm used, tested ! Dimensions: 305 x 200 x 160 mm

workpiece diameter nominal: 2400 mm max. workpiece diameter: 2800 mm max. module: 30 mm control: Siemens Sinumerik 840 D dividing plate diameter: 2200 mm table diameter: 2500 mm Table hole Diameter / depth: 800 / 875 mm max. table load: 40000 kg Table rpm: 4,5 min-1 clamping length max.: 375 mm clamping diameter max.: 350 mm cutter diameter max.: 2800 mm Cutter arbor cone: HSK-B160 swivelling range milling head: + 30/-45° Distance Cutter - Workpiece: 615 / 1600 mm weight of the machine ca.: 57 t Slide drives: - Feed & rapid traverse speed: - axial 4000 mm/min - radial 3000 mm/min - tangential 3000 mm/min Equitment/Accessories: - IFK2 internal milling head - Milling arbor with spacers - chip conveyor - Oil mist extraction - technical Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, electric gear motor -Transfer in current condition as seen -Speed: 27 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 55 -Number: 1x motors available -Price: per piece -Dimensions: 510/160/H210 mm -Weight: 16 kg

Gear motor, electric motor -Speed: 160 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 480/200/H240 mm -Weight: 27 kg

Gear motor, electric motor -Speed: 55 rpm -Power: 0.18 kW -Construction: B5 angle -Diameter hollow shaft: Ø 19 mm -Protection class: IP 55 -Dimensions: 315/130/H155 mm -Weight: 6.7 kg

Geared motor with brake BAUER BS02-38H/DU04LA4-E/E003B4 0.06 kW 41 rpm 400 V IP54 shaft diameter: Ø 14 mm Flange diameter: Ø 80 / 110 mm used. tested ! Dimensions: 305 x 215 x 140 mm

MODUL ZFWZ 1250x14I gear hober (can do 1580 mm) Max. Diameter: 1250 mm Cutting width: 600 mm Module 2-16 Maximum size of the hob: 240 x 280 mm Table diameter: 1020 mm Speeds: 28 – 200 rpm Axial feed rates: 0.28 – 8 mm/min Radial feed rates: 0.1 – 2 mm/min Tangential feeds: 0.16 – 4 mm/min Stand tilt – left/right: +/- 45 Main motor power: 5 / 19.5 kW Power of the rapids motor: 12,5 kW Max. diameter of the part without tailstock: 1,250 mm Max. diameter of the part with tailstock: 800 mm Weight of the machine : 16 t Machine dimensions approx. 4.5 x 2.1 x h 3.3 m EQUIPMENT: Extended driven shaft for gear cutting up to Ø 1580 mm Capability to work with hob cutters Ø 235 mm and length 380 mm. Inverter control of the main electric motor. Expanded set of change gears

Gear Motor TRAMEC, EMK HA 110 ( HA110 ) EC-JF90L-8 0,0,0 55 kW 5.6 rpm 220 - 240 / 380 - 420 V IP55 hollow shaft: Ø 42 mm used, tested ! Dimensions: 710 x 310 x 250 mm

CHURCHILL PH3615 gear hobbing machine Max workpiece diameter 914 mm Max diametral/ pitch- 8 Module, 3 D.P. Horizontal centre distance:-63,5- 559 mm Max horizontal travel 469 mm Height hob centre to worktable: 127- 508 mm Max travel of vertical feed 381 mm Max height worktable to tailstock centre768 mm Table diameter 762 mm Table hole (diameter x depth) 89 x 381 mm Hob dia x length 178 x 203 mm Max travel of hob slide 127 mm Diameter of hob arbor 32 mm Hob spindle speeds, infinitely variable 50 – 200 rpm Vertical feeds 0.38 – 5 mm Main drive motor 10 HP Floor area 3960 x 2130 x 2300 mm Weight 11,500 kg Extended set of change gears Complete documentation Operational variable speed drives for main motor and feed drives

Gear motor, electric motor, three-phase motor -Speed: 95 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Dimensions: 390/210/H180 mm -Weight: 16.7 kg

Geared motor ENGEL GNM3150-G2.Br 6 gearbox G 2.6 63 W 120 rpm i: 30 : 1 42 V DC shaft: Ø 16 mm flange: Ø 64 mm used, tested ! Dimensions: 190 x 110 x 90 mm

max. wheel diameter: 600 mm gear width: 0 mm max. module: 16 (25) min. module: 1 center distance betw. workpiece-tool min/max.: 40 - 590 mm diameter of hob: 290 mm cutter length max.: 470 mm tangential adjustment: 450 mm milling head -swivable +/-: 45 ° milling head speed: 15 - 380 U/min table rotation speed: 50 U/min milling spindle drive: 37 kW table diameter: mm table load: 3750 kg feeds: 2000 mm/min Control: Siemens 840D total power requirement: 115 kVA weight of the machine ca.: 31 t dimensions of the machine ca.: m - 6-axis CNC control Siemens Sinumerik 840 D - complete covering - counter stay - Coolant Unit - Chip Conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

geared motor, electric motor -Speed: 32.5 rpm -Power: 0.55 kW -Design: B5 angle -Hollow shaft diameter: Ø 25 mm -Protection class: IP 44 -Quantity: 1x motor available -Dimensions: 470/155/H240 mm -Weight: 19.1 kg

Gear motor, electric motor, electric gear motor -Speed: 25 rpm -Power: 1.1 kW -Construction: B3 angle -Diameter shaft: 32 mm -Protection class: -Number: 1x motors available -Dimensions: 600/410/H410 mm -Weight: 97 kg

Gear motor, electric motor, electric gear motor -Speed: 24 rpm -Power: 0.55 kW -Construction: hollow shaft -Diameter hollow shaft: 27 mm hexagon -Protection class: IP 44 -Dimensions: 510/200/H190 mm -Weight: 15.7 kg

Gear Motor with Tachogenerator DARKER MOTORS GR 53x58 ( GR53x58 ) Gearbox PLG 52 33 rpm i: 91,, 12 : 1 24 V DC shaft: Ø 12 mm flange: Ø 97 mm spare part for AGIE CUT 300 ! used, tested ! Dimensions: 275 x 97 x 97 mm

max. wheel diameter: 360 mm gear width: 180 mm max. module: 7 min. module: 0,5 Control: Reishauer 0: max. 180 mm tooth width: max. 180 mm min. number of teeth: 10 max. number of teeth: 600 max.helical angle: 45 ° max. workpiece weight: 60,0 kg grinding wheel width: 84 / 104 mm grinding wheel diameter: 280 / 350 mm Spindle Speed: 1.100 - 1.900 min/-1 grinding spindle turning speeds at profiling: 52 - 95 min/-1 total power requirement: 24 kVA weight of the machine ca.: 5,0 t dimensions of the machine ca.: 5,0 x 8,0 x 3,0 m - CNC Control Reishauer - CNC Dressing Unit - Exhauster - Coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, three-phase motor -Speed: 28 rpm -Power: 0.25 kW -Construction: B5 angle -Diameter hollow shaft: Ø 24 mm -Protection class: IP 45 -Dimensions: 460/215/H160 mm -Weight: 18 kg

Gear motor, electric motor -Speed: 211 rpm -Power: 0.25 kW -Construction: B5 -Diameter hollow shaft: Ø 22 mm -IP protection -Dimensions: 335/140/H190 mm -Weight: 9 kg

Gear motor, electric motor -Speed: 76 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Dimensions: 380/160/H190 mm -Weight: 14 kg

Timing belt gear motor, gear motor DIETZ - MOTORS KSL-ANT-05 DR 80B/ 4 Q 0,0,0 75 kW 972 rpm 220 / 380 V IP54 hollow shaft: Ø 28 mm approx. 5 m connection cable New !' Dimensions: 340 x 260 x 220 mm

max. wheel diameter: 400 mm gear width: mm max. module: Control: total power requirement: kW weight of the machine ca.: 4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Servo Motor with Gearbox and Brake, Permanent Magnet Motor SEW KAF47 CM71S/BR/TF/RH1M/SB64 ( KAF47CM71S / BR / TF / RH1M / SB64 ) < br /> 3000 rpm < br /> 400 V IP65 SEW i 39,61:1 hollow shaft diameter: Ø 35 mm wavelength: 150 mm Groove width: 10 mm flange diameter: Ø 130 / 200 mm bolt circle diameter: Ø 165 mm 4x Bore: Ø 11 mm used, tested ! Dimensions: 580 x 220 x 210 mm

Gear motor, electric motor, electric gear motor -Speed: 19 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Brake -Price: per piece -Number: 1x available -Dimensions: 505/240/H200 mm -Weight: 30 kg

Gear motor, electric motor -Speed: 250 rpm -Power: 0.75 kW -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 55 -Dimensions: 440/220/H160 mm -Weight: 14.45 kg

Servo Motor with Gearbox and Brake, Permanent Magnet Motor SEW KAF47 CM71S/BR/TF/RH1M/SB64 ( KAF47CM71S / BR / TF / RH1M / SB64 ) 3000 rpm IP65 SEW i 39,61:1 hollow shaft: Ø 35 mm flange: Ø 200 mm used, tested ! Dimensions: 580 x 220 x 210 mm

Inv. Num. : 8799 Type: FO-10 Producer: TOS Created: 1958 Parameters: Maximum gear diameter: 1000 mm Maximum module: 10 Machine dimensions: 3120 x 1870 x 2525 mm Machine weight: 9000 kg

Gear motor, electric motor -Speed: 30 rpm -Power: 0.45 kW -Construction: hollow shaft angle -Diameter hollow shaft: Ø 24 mm -Protection class: IP 54 -Brake -Number: 1x geared motors available -Price: per piece -Dimensions: 375/160/H275 mm -Weight: 12.5 kg

Geared motor with brake VEM Z1 BR 71.1/4 M301 0.25 kW 40 rpm 220 / 380 V IP44 Shaft diameter: Ø 24 mm Flange diameter: Ø 160 mm New !' Dimensions: 355 x 160 x 250 mm

max. wheel diameter: 600 mm gear width: 450 , 600 mm module: distance gear spindle / pinion head: 40 - 450 mm distance pinion spindel head / gear head: -160 - 600 mm axis adjustment +/-: 60 mm spindle turning speed - stepless: 1 - 2120 U/min spindle bore: 130 mm taper in main spindle: MK 60 total power requirement: 30 kW weight of the machine ca.: 6,6 t dimensions of the machine ca.: 2,8 x 1,8 x 2,1 m Bevel gear testing machine, 2 flank testing! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor -Speed: 60 rpm -Power: 0.11 kW -Construction: B3 -Diameter shaft: Ø 14 mm -Protection class: IP 54 -Brake -Number: 1x geared motors available -Price: per piece -Dimensions: 415/170/H120 mm -Weight: 37 kg

Gear motor, electric motor, electric gear motor -Speed: 188 rpm -Power: 0.55 kW -Construction: B5 -Diameter shaft: 12 mm -Protection class: IP 65 -Dimensions: 265/138/H117 mm -Weight: 4.3 kg

Gear motor, electric motor -Speed: 75 rpm -Power: 0.75 kW -Construction: B3 angle -Diameter shaft: 12 mm -Protection class: IP 65 -Dimensions: 250/160/H120 mm -Weight: 4.75 kg