ma used for sale

x-travel: 835 mm y-travel: 510 mm z-travel: 510 mm CNC-control: SIEMENS table-size: 1000 x 560 mm max. table load: 800 kg spindle taper: SK 40 spindle turning speed range: 20 - 8.000 U/min feed stepless: 1 - 20.000 mm/min rapid traverse: 20 m/min drive capacity - spindle motor: 13 / 9 kW tool change unit: 20 Pos coolant: voltage: 380 V total power requirement: 35 kVA weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3,50 x 3,50 x 2,70 m - Serial No.: 15415027604 - machine as good as new - Machine ON: 2.599 h program ON: 1.027 h - tool measurement BLUM-MICRO incl. calibration tool - infrared probe HEIDENHAIN TS 640 - Tool changer 20 pos. with double gripper - chip tray (no chip conveyor) - div. tool holder - coolant unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MELTER MARCHESINI DUMEK 600 L Melter used for the preparation of various products. Auxiliary unit for turboemulsifiers to heat the aqueous or oily phase, or as a preparation unit for some creamy products that do not require the functions of the turboemulsifier. Slow and/or rapid mixing systems available. Built in 2018. - Capacity: 600 liters - Material: AISI 316 stainless steel

ITEM NO. AT100FU-EC - Year of construction 2017 - Flow rate 1 000 / 10 000 ltr./h - Speed 900 / 1 429 rpm - Thread DN 40 - 1 year functional warranty

ITEM NO. REFB15-1-CZ - Stainless steel housing - Thread 38Pf - 1 year functional warranty

A laser cross-welding system is offered. Fiber laser 1500W water-cooled, cooling unit integrated, pallet truck guide, shielding gas supply, weld seam pressing device, remote access RMACC01 SECOMEA, strip width max.: 110mm, strip material: steel: 0.25mm-3.0mm, C steel: 0.25mm-2.5mm, aluminum: 0.25mm-2.5mm, copper: 0.20mm-1.2mm, dimensions W/H/L: 650mm/2054mm/1050mm, weight: approx. 650kg. Inspection possible by appointment.

A MAN truck including a rear-mounted loader crane Palfinger PK 7501 is available. Engine power: 184kW, displacement: 6871cm³, fuel: diesel, wheel and tire size: 265/70 R 19.5, crane type: hydraulic knuckle boom loader crane, max. lifting capacity: 5400kg, reach: 13800mm, max. inclination: 20°. Documentation available. An on-site inspection is possible.

inlet wire diameter 10-32 mm number of drafts 1 dia. of capstan 900 mm

Used machine HSC70 linear Machine Type: CNC 5-Axis Milling Center Model: HSC70 linear Manufacturer: DECKEL MAHO Control:3D control Heidenhain TNC 640 Year of Make: 2016 #001347 Equipment: - Spindle speed up to 28,000 rpm - Production package 980I with ICZ and temperature control 01 - Rinsing gun for swarf rinsing - Electronic handwheel - Tropical Pack This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Used machine Vertical machining center Machine type: DMG DMC 635 V/P Control: Heidenhain iTNC 530 Year of Make: 2013 TECHNICAL DATA: Travels: X-axis: [mm] 635 Y-axis: [mm] 510 Z-axis: [mm] 460 Speed range: [1/min.] 10,000 Tool holder: SK 40 Tool Changer Tool positions: 30 Pallet system Number of pallets: 2 Table size: [mm] 560 x 790 Features: No internal cooling (IKZ) Electronic handwheel Probe TS649 Tool breakage detection table switches Chip rinsing gun This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Complete can filling and closing line for liquids (nutrition) in 250 gram aluminium cans. Product: nutrition liquids. Formats: diameter 65 mm, height: 90 mm, filling weight 250 gram. 24x per box. Capacity: up to 500 / 420 cans per minute (30.000 / 25.000 per hour) for different parts of the line (with automatic palletiser) but the last year reduced to 325 cans per minute (19.500 per hour) because of manual palletising of the carton boxes on a pallet. Dismantling date: March / April 2026., Line exisiting out of:, 1. Preformed can de-palletiser machine, separate layer by layer from the pallet including lid sorting unit., Manufacturer: van Uitert B.V., Year: 1996, Machine number: D05-11399-01, Serial number: 1996.07.005, Installed power: 10 kW - 400 V - 50 Hz, Consumption of air: 3 Nm3/h, Weight: 2.500 kg, Capacity: up to 500 cans/min = 30.000 cans/h, Control panel with Danfoss VLT frequenc ...

IHI TURBO OIL FREE COMPRESSOR, WATER COOLED Model : TRA20-235kW Origin : Fully Made in Japan Operating Condition Gas : Compressed Air Capacity : 40m³/min Suction Temperature : 35ºC (Design Point) Relative Humidity : 80% Discharge Pressure : 6barG Compressor Specification No of Stage : Three Output of Driver : 235 kW Voltage : AC415V / 50Hz / 3PH Noise Level : 85dB Starter System : Inverter Starter Cooling Water : Fresh Water Inlet Temperature : 32ºC Water Requirement : 35m³/h Dimensions L x W x H (mm) : 3,700 X 2,000 X 2,000 Weight : 7,100 kg

Model: PLT-400 Year: 2022 Condition: Used Serial Number: 10492297 Stock Number: 3190J Belt width: 400 mm Product thickness 3 - 51 mm Belt speed: 0.36 - 24 m/min Compressed air: 0.7 l/min Power: 3 x 400V, 50Hz, 3kW Dimensions: 3300 x 1100 x 1500 mm Weight: 650 kg With extra long infeed conveyor of 1600 mm

Manufacturer: EMCO Maxxmill 350 Model: Maxxmill 350 Year of Manufacture: 2017 Type of Machine : Milling Center Spindle hours: 11,000 CNC Control: Heidenhain iTNC620 HSCI Spindle: ISO30, 12,000 rpm, 33 Nm, 7 kW 4th axis: Yes 5th axis: Yes Automation system: Lang Eco Compact 10 - fully operational and pre-configured Condition: Used, fully functional Axis Travel - X axis: 350 mm - Y axis: 250 mm - Z axis: 300 mm Equipment and Features - Tool magazine: 50 positions - Chip conveyor: Yes - Band filter: No - Pallets: No - Comprehensive ISO30 toolholder package included - Lang Eco Compact 10 automation system - fully operational and pre-configured, included - Custom-built workspace cover - special manufacture, included Find more here - / Contact us at -

Refrigerated counter Coldline Master GN 2 for fast and flexible application Model No.: TS13/1M-760 Stainless steel version Cooling range - 2 to + 8°C adjustable Convection cooling Device is plug-in, 2 doors Connection 230V Dimensions: 1300 x 680 x 860 mm, WxDxH Used device

Refrigerated display case Dilara 180 Convection refrigerated display case 4 stainless steel shelves verst. Sliding doors made of insulating glazing Temperature adjustable from +3 to +15°C Coolant R 290 only DGUV V3 tested by us Measurements; 1800 x 750 x 2000 mm, WxDxH Connection: 230V, 1166 Watt Demonstration device & SAB tested

Steam sterilizer Manufacturer: Matachana Type 101 E-1 LAB Steam sterilizer 101E-1, with integrated steam generator, 1 door Load capacity 75 liters Chamber capacity 108 liters Last assignment Pharma Applications: Suitable for sterilization of medical instruments, laboratory glassware and other materials that need to be sterilized.

diameter range 6 mm shaft length under head 25 mm output pieces/min 100

used spiral mixer Eberhardt Maximat MAAN 120Manufacturer : EberhardtType: Maximat MAAN 120400 V 50Hz 8,55kW 20,5 ASpiral kneader Eberhardt Maximat MAAN 120 extendable, 120 kg dough, 2 clocks, with 2 stainless steel kettles, stainless steel spiral,This is a high-quality professional device, which is mainly used in bakeries and kitchens for kneading dough in large quantities. Brief overview: Eberhardt Maximat MAAN 120Manufacturer: Eberhardt GmbH (a German manufacturer of baking technology based in Neckarsulm)Type: Stationary kneading machine / spiral mixerKneading capacity: Up to 120 kg wheat dough

Spiral mixer Eberhardt Maximat MAAN 120 extendableManufacturer : EberhardtType: Maximat MAAN 120400 V 50Hz 8,55kW 20,5 AUsed spiral mixer Eberhardt Maximat MAAN 120 extendable, 120 kg dough, 2 clocks, with 1 stainless steel kettle, stainless steel spiral,This is a high-quality professional device, which is mainly used in bakeries and large kitchens for kneading dough in large quantities. Quick overview: Eberhardt Maximat MAAN 120Manufacturer: Eberhardt GmbH (a German manufacturer of baking technology based in Neckarsulm)Type: Stationary kneading machine / spiral kneading machineKneading capacity: Up to 120 kg

bushing cut-off , PKO diameter range 16-30 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 235 mm shaft length under head 180 mm output - pieces/min 90 press power 380 to

bushing cut-off , PKO , IFO diameter range 6-14 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 280 mm shaft length under head 220(260) mm output - pieces/min 40-75 press power 100 t

bushing cut-off , PKO , IFO diameter range 10-26 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 220 mm shaft length under head 165 mm output - pieces/min 35-70 press power 380 to

Key data: 10 t

Various spare parts for eccentric press - brands SMERAL and VSS KOSICE

Masterfill Filling Machine S 500, The Masterfill S 500 is a high-performance, precision filling machine designed to meet the demanding requirements of modern dairy and food production facilities. Built for reliability, efficiency, and hygiene, the S 500 delivers consistent filling accuracy across a wide range of liquid and semi-liquid products., Engineered with advanced control systems, the S 500 ensures smooth operation and minimal product waste, making it ideal for filling milk, yogurt, cream, sauces, and other viscous products. Its robust stainless-steel construction guarantees durability while complying with strict food safety and hygiene standards., The machine features user-friendly controls, allowing operators to easily adjust filling volumes and production speeds to suit different product types and packaging formats. With its compact footprint and efficient design, the Masterfill ...

width: 3.000 mm height: 1.900 mm length: 800 mm Pneumatic gluing press FEDERHENN MASCHINEN type 99.98 with equipment for the final assembly of grave crosses. The press is modular and mobile and can be converted for different pressing tasks. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Alfa Laval self-cleaning disc centrifuge, type MAPX 309BGT-14-60. Centrifuge after technical inspection. Replaced bearings and seals. Capacity approx. 10m3 /h

Stainless steel, VA, chrome-nickel steel, material cuts, stainless steel, chrome steel, rust-free -Material: cutting and manufacturing -Round steel, tubes and sheets -different materials: in stock -Material numbers: 4301, 4541, 4571, 1.4828, 1.4876, 1.4841, 1.4878 -Please ask for the material you want with the dimensions. -Price from: per kg and cut depends on material

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter -Manufacturer: Mann & Hummel, Mann-Piclon air filter housing -Part Number: 45 160 92 901 -Inlet/Outlet: Ø 65/61 mm -Quantity: 47 combination air filters available -Price: per piece -Dimensions: Ø 225/305 mm -Weight: 2.35 kg

Model: Active Mixer 200 Year: 2020 Condition: Used Serial Number: 10446009 Stock Number: 3302 Mixer: 200 litres Semi-automatic tempura- and battermixer with programmable recipe management Water: 2 - 5 Bar Power: 3 x 400V, 50Hz, 7kW Dimensions: 1250 x 950 x 1800 mm Weight: 400 kg

Steel products, flat steel, round steel, bar steel, tubes, profile tubes, square tubes, rectangular tubes, sheets, shaped steel, wide flange beams, narrow flange beams, plates, structural steel, rolled steel, drawn steel, I-beams -For our customers in the area, we offer material cut-to-size and contract manufacturing and a large selection of materials in stock -Sheets, pipes, profiles, bars and sections made of steel, stainless steel and non-ferrous metals such as aluminum, brass and gunmetal

Press has made 2 686 854 pieces so far, and large factories make well over 10 million pieces with these machines. The maximum theoretical diameter of the piece is 380 mm, production-wise max. 320 - 340 mm finished size. Depth 110mm finished measurement. Speed: small objects 300 - 350 pcs/h large ones 120 - 160 pcs/h. Between 2004 and 2010, less than 2 million pieces were driven on the Press, and after that the demand for the products has decreased and today it is driven only a few hours a week, sometimes the press stands unused for a couple of weeks

Load jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, load jack thread -Manufacturer: Matrinor, load racks lashing points 4 pieces -Original use: aerospace industry -Payload: 9840 kg -Shackle mount: Ø 120 mm / M42 -Price: complete -Dimensions: 555/252 / H175 mm -Weight: 62 kg / pc.

Deck oven WP Matador MD101C52 - Manufacturer: Werner & Pfleiderer - Type: Matador MD101C52 - Deck oven with gas burner - 5 shelves each 120cm wide and 160cm deep - 3 Pull-out stoves - With exhaust hood - Combitherm Technical data: - 79 kW - 3N 400 V 50Hz 12A - Year of construction: 10/ 2014

An old Martin automatic lathe is available. Center height: 355mm, turning diameter over bed/slide: 720mm/515mm, faceplate diameter: 710mm, three-jaw chuck diameter range: 250mm-500mm, crank: 980mm, swing diameter: 1030mm, bed width: 530mm, speed: 1400rpm, quill diameter: 1150mm, max. quill travel: 280mm, max. workpiece weight: approx. 4000kg, weight: approx. 4900kg. Documentation available. An on-site inspection is possible.

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Mann air filter housing -Inlet/Outlet: Ø 39/39 mm -Part Number: 45 037 72 145 -Quantity: 1 air filter housings included -Price: per piece -Dimensions: Ø 173/165 mm -Weight: 1.8 kg

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station, injection molding machine, plastic injection molding machine, plastic injection molding press -Manufacturer: Krauss Maffei, hydraulic unit from injection molding machine 90-340 B -Motor: Loher 15 kW / 380/660V / 1425 rpm -Individual components: see images -Liter output: unknown -Dimensions: 900/520/H610 mm -Weight: 261 kg

The Mac Ewans Centrifugal pump is a pump for use in sanitary applications. Previous used in a Casein plant. Motor: 7,5 kW - 400 V - 50 Hz - 1.440 rpm - 14,2 A. Diameter of the impellor: 180 mm. Connections on the inlet: 70 mm. Connections on the outlet: 60 mm. Estimated capacity: ± 20.000 ltr/h., macewans.co.nz/, Type of Machine: Centrifugal pump, Stock Number: 1444, Diameter of the impellor: 180 mm, Motor: 7,5 kW - 400 V - 50 Hz - 1.440 rpm - 14,2 A, Estimated capacity: ± 20 m3/h

Used line for the production of Mazzoni toilet cubes with a capacity of 1000 kg/h. The line includes: – Mixtruder type SZ-1000 – Filtrocyclone – Extruder SX-B-250/HE – Extrusion head. – Slicer – Twin screw conveyor – Year of manufacture 2007.

Hydraulic pump, oil pump, gear pump, vane pump, hydraulic power unit, double hydraulic pump -Double hydraulic pump: from KHS Krauss Maffei KM 1000-5000A injection molding machine -Pump 1: Voith type IPH 6/5-125/50 300 bar -Pump 2: Voith type IPR/H 6/5-125/40 210/300 bar -Drive: Loher 75 kW 1500 rpm -Individual components: filters/valves, see photos -Dimensions: 2285/800/H900 mm -Weight: 1132 kg

Inv. Num. : 8008 Type: DMG DMU 50 eco Producer: Deckel Maho Gildemeister Created: 2010 Parameters: Control system: Siemens Sinumerick 810D Switch-on hours: 56933 h Operating hours: 25670 h Number of axles: 5 pieces Number of stacking positions: 16 Maximum spindle speed: 8000 1/min X-axis travel: 500 mm Y-axis travel: 450 mm Travel Z axis: 400 mm Equipment: ShopMill

Kuntschar & Schlüter GTK 250 BO1 complete biogas cogeneration unit, commissioned in 2018, with a total of 65,000 operating hours. Equipped with a MAN E 2848 LE engine and a Marelli Motori MJB 315 MB (450 kVA) alternator, this set is designed for the energy recovery of biogas. Electrical power of 100 kW and thermal power of 149 kW, ideal for operation in biogas plants or industrial sites. Machine serviced, available quickly. Site visit possible. Technical file and photos available on request.

Kuntschar & Schlüter GTK 250 BO1 complete biogas cogeneration unit, commissioned in 2018, with a total of 65,000 operating hours. Equipped with a MAN E 2848 LE engine and a Marelli Motori MJB 315 MB (450 kVA) alternator, this set is designed for the energy recovery of biogas. Electrical power of 100 kW and thermal power of 149 kW, ideal for operation in biogas plants or industrial sites. Machine serviced, available quickly. Site visit possible. Technical file and photos available on request.

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Mann air filter housing -Inlet/Outlet: Ø 52/46 mm -Part Number: 44 100 92 921 -with air filter: C 11 100 -Quantity: 6 air filter housings available -Price: per piece -Dimensions: Ø 190/285 mm -Weight: 1.15 kg

Slab cutter, paving stone cutter, stone cutter, paving stone cutter -for effortless cutting of slabs and paving stones to length through the translation of the eccentric lever -High stability with low weight -precise guidance of the cutting blades -Pendulum-mounted upper blade for cutting materials with a conical cross-section (curbstones) -max. for 6 cm stones -Weight: 10 kg

Scissor lift table trolley, scissor lift table, scissor lift table, scissor lift, scissor lift, single scissor lift table -Load capacity: 500 kg -Platform: 1260 x 915 mm -Dimension retracted: 500 mm -Dimension extended: 1115 mm -Max. Stroke: 615mm -Quantity: 1 piece available -Transport dimensions: 1420/915/H870 mm -Town weight: 274 kg

Tool change trolley, lifting table trolley, pallet truck, scissor lift table, scissor lift table, scissor lift, scissor lift, single scissor lift -Retracted height: 755 mm -Height extended: 1105 mm -Max. Stroke: 350 mm -Number: 1x tool change trolley available -Price: per piece -Transport dimensions: 890/580/H755 mm -Own weight: 170 kg

Cutting sieve, shredder sieve, sieve basket, sieve for chopper, shredder system, single-shaft shredder, shredder, granulator, shredding machine -Perforation: 65 x 65 mm -Recording holes: Ø 75/30 mm -with supporting ribs -Drawing with the pictures -Dimensions: 1600/1844/H620 mm -Weight: 696 kg

Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -for sawing: edges on the front and back edges of the workpiece -1x: Motor Perske -Type: KN60.09/2 -Power: 1.5 kW -Voltage: 220/380 volts -Frequency: 50 Hz -Speed: 2810 rpm -Dimensions: 900/575/H450 mm -Weight: 112 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 900 mm -Piston diameter: 63 mm -Piston rod: Ø 25 mm -Connection piston rod: M22x2.5 -Total length: 1110 mm -Total length extended: 2010 mm -Number: 1 piece available -Price: per piece -Dimensions: 75/75/H1110 mm -Weight: 10.7 kg

Power supply for lamp-pumped lasers, marking lasers, control card, input card, control -Manufacturer: SLS Spectron Laser Systems MAINS SUPPLY -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/530/H220 mm -Weight: 15 kg