131,223 used machines on RESALE, but how to find them? Machine Search
Gewinde-Ø: 52 mm threading length: 500 mm thread pitch: entsprechend Hohlspindel -Ø: 54 mm spindle turning speed range: 25 - 140 U/min turning speeds:: 6 Stufen voltage: 380 V / 50 Hz main drive motor: 3 kW total power requirement: 4,5 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 1,0 x 1,8 x 1,4 m • with pneumatic workpiece clamping, • threading head Z 52, • cooling device, • 2 sets of chaser holder,size: Z52/2B, + 21B • 5 sets of chaser jaws,pitch 1 - 2,5 mm Machine is in a good condition. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 170000 KW
Fully Equipped Diesel Power Plant – Over 170 MW Capacity This opportunity is not yet on the market — and won’t be found anywhere else. Contact us now to receive exclusive details and position yourself ahead of the market before the sale is public. END USERS ONLY
x-travel: 640 mm y-travel: 600 mm z-travel: 500 mm Control: SIEMENS 810D powerline table dimensions: 850 x 630 mm table load capacity: 600 KG tool magacine with: 30 Plätzen spindle turning speed range: 12.000 U/min total power requirement: 42 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,50 x 3,30 x 3,60 m Tool breakage / measurement BLUM Electronic handwheel 3 leveling elements chip conveyor coolant / belt filter system Interlit SPB 3/600 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 750 mm table width: 550 mm ampere: 60 A Control: Makino MGE20 x-travel: 600 mm y-travel: 400 mm z-travel: 250 mm workpiece weight: 450 kg tool change unit: 8 total power requirement: kW weight of the machine ca.: 5,00 t dimensions of the machine ca.: 3,00 x 3,50 x H3,00 m Die-sinking machine with control MAKINO MGE20 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The MAFAC ELBA is a powerful spray cleaning system for the aqueous cleaning and drying of a wide variety of components. It is ideal for the thorough and gentle cleaning of format parts, filling valves, stainless steel containers, trays, sheets, knives, pipes, and fittings – even with complex geometries., The heart of the machine is the patented rotating spray and basket system, which ensures uniform wetting of all component surfaces. The workpieces are introduced into the system either as bulk material or as set material in standard baskets (600 × 400 × 288 mm)., Cleaning takes place in two separate baths:, - Bathroom 1: intensive cleaning to remove product residues, grease and impurities, - Bathroom 2: Rinsing to minimize residues and surface finishing, -, Integrated Fine filtration and a Coalescing oil separator ensure the long-lasting quality of the cleaning media and reduce chemi ...
Key data: 45 °, 3300 mm, 1250 mm
Equipment: - Scoring saw unit - Trimming length 3300 mm - Cutting width 1250 mm, adjustable by handwheel, digitally displayed in control panel, width stop can be folded down - Cutting height and angle above hydr. Foot pedal adjustable, digitally displayed in control panel - Saw blade Ø 200-450 mm - Speed 2800 / 4000 / 500 rpm, manually adjustable via belt flip - Electrics: 380 V, 50 Hz, 3~, 13.0 A
impression count 143 MİO, Sheet-fed offset press - Printing units: 5 + lack unit. Perfecting 2-3/5-0, High pile delivery Per requirement Kw 00 approx, Weigh 49.350 Kg. circa, Accessories included:, - Steel plate on feeder, - Stream feeder with vacuum belts, - Preset (autom. paper size and thickness setting), - Electronic double sheet detection, - Electromechanic double sheet detection, - Electronic side lay control, fotoelectronic and akustic, - Anti-static on feeder and delivery, - RCI machine control and diagnosis by monitor console /self diagnostic, control and monitor console; remote inking; dampening; axial, circumferential and diagonal register control with light pen; day light illuminator and memory card for job memories, - ColorPilot D- quality control, - APL⢠automated plate changing, - Rolandmatic continuous dampening system with alcohol metering; cooling and re-circula ...
Ø max working wheel: 508, Ø min. working wheel: 380, Ø inside working wheel: 254 (305), Working wheel width: 205, Ø max. drive grinding wheel: 305, Ø min. drive grinding wheel: 230, Ø inside grinding wheel: 152.4, width of feed wheel: 205, Cutting speed: 30-45-60 m/s, R.p.m. of the driving wheel: 0-300, Diamond speed: 300, working wheel motor: 15 Kw (18Kw), Driving wheel motor: 10.4 Nm, Dimensions WxLxDxH: 2250x3380x2385, Weight: 9000Kg, CNC Brand: SIEMENS, CNC Model: 840 D, Number of CNC axes: 11
GENERAL CHARACTERISTICS:, Grinding Wheel Dimensions: Ø610xØ304,8x508 mm, Regulating Wheel Dimensions: Ø355xØ152,4x508 mm, Ø min/max to be rectified: 3 - 300 mm, Dimensions of the work wheel: Ø610xØ304.8x508 mm, Dimensions of the drive wheel: Ø355xØ152.4x508 mm, Weight: 17000 kg, Power: 100 kW
GENERAL CHARACTERISTICS:, Grinding Wheel Dimensions: Ø610xØ304,8x300 mm, Regulating Wheel Dimensions: Ø355xØ152,4x300 mm
GENERAL CHARACTERISTICS:, Grinding Wheel Dimensions: Ø610xØ304,8x300 mm, Regulating Wheel Dimensions: Ø355xØ152,4x300 mm
MARPOS automatic wheel balancer, tapes and gantry for loading and unloading | automatic wheel balancer, gantry and band for loading and unloading, smoke extractor, Ø grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Regulating wheel width: 254 mm, Diamond dressing speed: Ø508 x 254 mm, Lubrication (auto / manual): automatic centralized / automatic lubrication, Cnc brand: FANUC, Cnc model: Series 18i - T, Cnc axes nº: 8, Regulating wheel dimensions (od x id x width): 305 x 190.5 x 254 mm, Grinding wheel width: 254 mm, Total power: 25 kW, Voltage: 220/380 v, Long: 2150 mm, Width: 2200 mm, High: 3400 mm, Weight: 8000 kg, Accessories included: MARPOS automatic wheel balancer, tapes and gantry for loading and unloading | automatic wheel
High: 2.900 mm, Long: 2.200 mm, Speed: 22.4 / 2.800 r.p.m., Width: 900 mm, Weight: 2.350 kg, Voltage: 220 / 380V, Ø column: 300 mm, Ø spindle: 80 mm, Total power: 5.3 kW, Spindle displacement: 360 mm, Surface of the table: 1,300 x 750 mm, Do not. drill spindle speeds: 15, Advances min / max spindle chuck: 0.032 / 1.5, Number of drill spindle advances: 12, Max. distance spindle axis column: 1.200 mm, Maximum distance table to spindle: 1.100 mm, Minimum distance table to spindle: 750 mm, Specification: Radial
Mettler Toledo PAS 3012 check-weigher with labeling machine., The labeling had can be electrically moved in all directions for an accurate positioning of the labels., - Max. weight: 6KG, - Min. weight: 0.020KG, - E: 0,001KG, - Rated for 70 packs per minute
Maurer cooking chamber. Twin trolley., 6 trolleys available
MARIS TWIN SCREW EXTRUDER, Loading hopper for regrinds, Barrel with 2 x 92 mm screws 40 L/D, co-rotating parallel screws for polyolefines, CEAR d.c.motor, N.2 vacuum degassing pumps, 4-plate semi-automatic screenchanger, hydraulic pack, Average throughput rate around 1 Ton/h, Water ring pelletizer, drying centrifuge, Electrical control panel, The machine is offered as is or checked
Extruders 65-50-50 mm. diam.screws, K DESIGN thickness control, Double collection of 1.800 mm., Average throughput rate 200-240 kg/h, total installed power 350 kw, compressed air consumption 330 l/min, water consumption 10 l/min, air pressure 6-7 bar, min-max line speed 0-150 m/min, motor power 234 kw, resistive power 25 kw, reduction ratio 1/6, ac motor revolutions standard 2300 rpm, Cartridge filter changer, power 6.75 kw, Resistive power 32.6 kw, Die diameter 220 mm, Bubble cooling group, Electric fan power 22 kw, RV ironing motor 2.7 kw, Platform rotation 0.4 kw, Diagonal fans 0.75 kw, Speed 0-150 m/min, Double winder with calender, Total motor power 6kw, Min./Max. diameter of reels 150/900 mm, Max. reel weight 750 kg, installed power - used power in work: about 60-65% : 350, capacity: 200-240 kg/h, working width: 1.800 mm.
MARIS TWIN SCREW EXTRUDER, Barrel with 2 x 92 mm screws 40 L/D, n.2 vacuum degassing pumps, co-rotating parallel screws for polyolefines, complete with 4-plate semi-automatic screenchanger, hydraulic pack, Average throughput rate around 1 Ton/h, Water ring pelletizer, drying centrifuge, electric cabinet, The machine is offered as is or reconditioned
An overbelt metal separator is used to remove ferrous contamination from chopped scraps, on the extraction belt from a shredder. We offer different solutions in size and power even for stainless steel., Just send us your requirements and we will send you a most cost-effective, targeted offer., An overbelt metal separator is the easiest way to remove ferrous contamination from scraps., This machine is a available in different sizes, with different magnetic forces, Constructed according to the Italian Top Quality Standards, This is an example :, OVERBELT MAGNETIC TAPE SEPARATOR TYPE R60-80E, - 800 mm wide at a distance of 200 mm from the belt, - Construction characteristics :, - permanent magnet in bipolar conformation with low-carbon iron structure made with Sr Ferrite permanent magnets with high magnetic induction and great coercive force (guaranteed magnetic field strength 20 years), - ...
MARIS TWIN SCREW EXTRUDER, Type TM 85 LC 37 L/D, dosing unit for granulated materials, barrel with 2 x 85 mm co-rotating screws 37 L/D, max screw rpm : 152, vacuum degassing pump 4,5 kw drive, Present capacity 450 kg/h depending on materials and feeding rate, 64 kw drive, Constructed in 1992, offered AS IS or reconditioned, installed power - used power in work: about 60-65% : 64, screws diam.: 85 mm. 37 L/D, screws: co-rotating
for sale is a timber truck from MAN, Curb weight 15150 kg, permissible total weight 26000 kg, overall dimensions L / W / H 10500 / 2550 / 4000 (mm), engine type V-engine / emission class EURO 6, / power 471 kW, transmission automatic, mileage 290,878, Palfinger Epsilon M12Z loading crane, Subject to prior sale, changes and errors!
cutting diameter: 320 mm saw band length: 3660 mm cutting width: 0,9 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m stepless cutting speed hydraulic material clamping infeed automat coolant device roll conveyor manual swivable cutting frame for miter cuts Technische Daten: Schnittbereich rund 0° / cutting range round 0° 320 mm Schnittbereich vierkant 0° /cutting range square 0° 350x320 mm Schnittbereich rund 45° / cutting range round 45° 260 mm Schnittbereich vierkant 45° /cutting range square 45° 250x180 mm Schnittgeschwindigkeit / cutting speed 20-100 m/min. Sägebandlänge / dimensions of the saw band 3660x27x0,9 mm Antriebsleistung / drive capacity 3,9 kW Gewicht der Maschine ca. / weight 1825 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and descripti ...
MAWEG frame press with automatic adjustment of height and width Press size 4.50 m.x 2.60 m. Frame Press Size: 5.30 x 3.40 x 1.30 m.
Key data: 45 °, 3300 mm, 850 mm
Martin T72A sliding table saw with: hydraulic saw height and digital display at eye level Hydraulic saw blade swivel and digital display at eye level Handwheel adjustment of the cutting width and digital display at eye level Parallelogramtic for angular sections -46° to 46° and digital readout Scoring saw Brand MARTIN Type T72A Comfort Year of Make: 1999 Control panel eye level integrated in the extraction support (saw blade height, inclination, cutting width) Saw blade height adjustment: Hydraulic with digital display in the screen 0-170 mm Saw blade tilt: Hydraulic with digital display in the screen 0- 46° Parallel stop: handwheel adjustment with digital display in the screen Saw hood: Electric height adjustment of the hood Manual move to the right for oversize products to saw Landing table: Aluminium parallelogramtisch +/-46° miyt digital angle display Leng ...
Key data: 45 °, 3300 mm, 1250 mm
Martin T72A Sliding table saw with NC-controlled cutting width, electric blade height, inclination; Brand MARTIN Type T72A M-No.: V238101 Year of Make: 1997 YouTube: Control panel at eye level integrated in the extraction support Saw blade height adjustment: Electric with digital display in the screen Saw blade tilt: Electric with digital display in the screen Parallel stop: NC control with digital display in the screen Landing table: parallelogram cross table Length stop: Aluminium 2,200mm, extendable up to 3,200 mm with digital 2-point stops Main saw: ø450 mm, cutting height: 170 mm, saw swivel: 0° - 46° Speed control: 2800/4000/5500 rpm Motor: 5.5 KW Trolley: 3,300 mm Cutting width: 1,250 mm Extraction: Top: ø80 mm, Bottom: ø120 mm Weight: 1,600 KG
Key data: 45 °, 3300 mm, 1250 mm
Martin T72A Sliding table saw with NC-controlled cutting width, electric blade height, inclination; 3-axis electric scoring adjustment Brand MARTIN Type T72A Aut Year of Make: 1997 Control panel: At eye level in the extraction support, integrated with 3-axis NC control, electric saw hood, height adjustment and 3-axis scoring Saw blade height adjustment: Electric with digital display in the screen Saw blade tilt: Electric with digital display in the screen Parallel stop: NC control with digital display in the screen Saw hood: Electric height adjustment Landing table: Steel (galanized) with fixed detent points for mitre angles 0°, 22.5°, 30° and 45° or freely selectable intermediate interlocking angles Length stop: Aluminium 2,200mm, extendable up to 3,200 mm with 2 point stops Main saw: ø450 mm, cutting height: 170 mm, saw swivel: 0° - 46° Speed control: 2000/275 ...
Key data: 45 °, 3300 mm, 1250 mm
MARTIN T73 AUTOMATIC, parallelogramtic, driven trolley, 3-axis control Mark: MARTIN Type: T73 AUTOMATIC Year of Make: 2001 Table dimensions: 1,350 x 1500 mm. Cutting width: 1,350mm Edging table: 3,300mm Main saw: 7.5 kW Saw blade shaft: ø30 mm. with two drive pins Saw blade change: "ProLock" quick-change system Saw blades: Ø 250 - 500 mm; up to Ø 400 mm retractable under table; Cutting height: 170 mm. (Saw blades. 500 mm.) Saw blade swivel: 0 - 46° Scoring: Optional (Could be installed for € 1,750 surcharge) Cutting width: 1,350 mm Rip fence: Stop ruler in anodized aluminum; Final position; Automatically lowers below table level Length stop: Digital length stop made of anodized aluminum with Martin 2-point stops Control: NC control with LCD display of width, height and oblique angle, plus 2 digital length stops Screen: LCD control panel at eye level, swive ...
x-travel: 630 mm y-travel: 800 mm z-travel: 750 mm control: SIN 840D sl Siemens B - axis: 360 x 0,001 ° A - axis: -200 -- +25 x 0,001 ° spindle turning speed - stepless: 20 - 18.000 U/min power capacity at 100 % load: 28,00 kW power capacity at 40 % load: 34,00 KW max. torque at 40% / 100% load: 110 / 84 Nm tool taper: HSK 63 feed X/Y/Z/-axis: 1 - 100.000 mm/min rapid traverse X/Y/Z: 100,00 m/min feed capacity X/Y/Z: 9 / 6 / 9 kN feed B-axis: 1 - 14.400 °/min feed A-axis: 1 - 7.200 °/min size of pallet: 2x 500 x 500 mm workpiece weight max.: 400 kg max. workpiece diameter: 800 mm workpiece height max.: 800 mm tool magacine with: 63 diameter of tools max.: 280 mm tool length - max.: 550 mm weight of tools max.: 15,00 kg total power requirement: 65,00 kW weight of the machine ca.: 14,00 t dimensions of the machine ca.: 5,50 x 3,50 x H3,20 m 5-axis machining center with SIEMENS SINUMERI ...
Key data: 90 °, 3000 mm
SPECIFICATIONS: Carriage length: 3000 mm Saw blade: max. Ø 500 mm - with scoring blade max. Ø 400 mm Scoring blade: max. Ø 120 mm Manual height/tilt adjustment 45° Stop with retractable system Digital measurement for height - inclination - stop width Pitching power: 0.75 kW Sawing power: 5.5 kW EQUIPMENT: Miscellaneous Accessories Angle cutting device 0° - 90°
Key data: 550 V
Gas Generation Unit with MAN E3262 LE202 Engine. Compatible with both natural gas and biogas. SCOPE OF SUPPLY • Engine • Alternator • Control panel Motortech All-in-One Vision 5 • Gas Ramp Technical documentation: Manufacturer's MAN datasheet, MAN Operating Instruction Manual. The engine has undergone borescope inspection, revealing all internal elements in well-preserved condition. Engine turns freely. The turbos have recently been overhauled. Available for sale from Gas Engine Exchange . Please check our full range of equipment at gasengineexchange.com.
We are pleased to offer for sale a Siemens SIPLACE SMT Machine Package, composed of the following equipment: ( tray units / accesories included ) 1.SIPLACE F5 HM Year of Manufacture: 2004-2006 Weight: 2,320 kg Technical Specifications - Operating Pressure: 5.5 – 8 bar - Air Flow: 300 Nl/min - Frequency: 50/60 Hz - Phases: 1:3 - Voltage: 230/400 V - Number of Wires: 3 wires per phase (3 x Ph) - Full-load Current: 3.3 A - Power Consumption: 1.8 kW - Circuit Protection: 3 x 16 A breakers - Max Motor Current (Rated): 16 A 2.WPW/3-900 Year of Manufacture: 2006 Weight: 230 kg Technical Specifications - Frequency: 50/60 Hz - Phases: 1:3 - Voltage: 230/400 V - Number of Wires: 3 wires per phase (3 x Ph) - Full-load Current: 0.7 A - Power Consumption: 0.4 kW - Circuit Protection: 3 x 6 A circuit breakers - Max Motor Current (Rated): 6 A 3.SIPLACE 80 S-15 HM Year of Manufacture: 1999 ...
MARIS TWIN SCREW CO-ROTATING EXTRUDER, suitable for compounds, recently used for SBS (stirene-butadiene-stirene), barrel with 2 x 58 mm screws 48 L/D - 600 rpm, Max Torque 945 Nm, 450 kg/h average throughput rate (depending on materials and feeding rate), n.1 vacuum degassing pump, 3 kw, 108 kw drive 1.345 rpm, Total installed power 171,5 kw, dry pelletizing unit - can be fitted with Water Ring or Strand or Underwater Pelletizer, vibrating screen, constructed in 2017, offered totally recondiktioned, installed power - used power in work: about 60-65% : 171.5, availability: 8 weeks from confirmatiom, options available: pelletizer - bespoke to project, capacity: 450 kg/h, conditions: totally reconditioned, type: 48 L/D 2x58 mm screws Ø
Sammelhefter / Saddle Stitcher Müller Martini Bravo Plus Amrys Year 2007 - SN. MMZO 1 306 445 – Working hours 7.100Std./h PLC Steuerung mit Display - Geschwindigkeit max. 14.000 cyc./h. Size (untrimmed) max. 320 x 480mm - (trimmed) min. 105 x 148mm - Product thickness max. 5mm 6 Feeder Type 0370.0458 - SN. MMZO 1 306 445 Umschlaganleger / Cover Feeder Type 1529.0416 - SN. NN35997/ZO1306447 Doppelbogen/Dickenkontrolle / Semko Thickness Control Type 0333.0435 Heftstation / Stitching unit Bravo Plus Typ 0380.0450 - SN. MMZO 1 306 445 Dreischneider / Three Knife Trimmer 0449.0435 - SN. MMZ0 1 306 445 Bandauslage / Band Delivery Müller Martini 1564.0400 Manuals all included
Mitteltrennschnitt Einrichtung / Centre Cut for Double Production Müller Martini 360 Baujahr / Year 2007 - Serial-No. 0360 4211 9 For Müller Martini Saddle Stitcher Type 360 - 4/5th trimmer knife attachment Mitteltrennschnitt Einrichtung für Müller Martini Sammelhefter Type 360
Kreuzleger / Compensating Stacker Müller Martini Perfetto Amrys Year 2007 - SN. MMZO 1 306 445 - 60 Mechanische Leistung - Meachnic Spped max. 16.000Ex/h Manuals all included --sehr guter Zustand / very good condition--
Antike Schneidmaschine - antique Guillotine CHN. Mansfeld SM Serial-No. 37544 Very Beautiful antique Guillotine. Sehr schönes antike Schneidmaschine.
PRINTING MACHINE FOR POLYBAGS VJ1530 STD 70m,IP55, Positive Air Pump,3m
We are offering a fully equipped machine workshop for sale, which includes the following equipment: 1. Machinery - MIKRON VCE 800 Pro Machining Center - LAGUN FCM 152 Milling Machine - CMZ TBI-450 CNC Lathe - PINACHO A 70 Conventional Lathe - PUSKAS PKM 10-S-500 Compressor - PUSKAS PLX-9 Dryer - SUPERLEMA Ø200 Grinder - CDM 210 Horizontal Bandsaw 2. Tools - HSS Drill Bits Ø1 to Ø35 - MD Drill Bits Ø1.5 to Ø20 - HSS Reamers Ø3 to Ø25 - Coated HSS Milling Cutters Ø2.5 to Ø25 - MD Milling Cutters Ø1 to Ø20 - D’ANDREA Boring Heads – Precision 0.002 mm (2 units) - Planer and Squaring Chucks Ø12 to Ø80 - Tool Holders for CNC & Conventional Lathes - Milling and Turning Inserts - Metric & Whitworth Thread Taps and Dies 3. Clamping Systems - ARNOLD MB 125 Vises – Precision-Ground (2 units) - ISO 40 Taper Collet Holders (DIN 69871) - ISO 40 Chuck Holders - Weldon System IS ...
TPG Hypoid Gearmotor FV35-750-30 0.75kw, Ratio: 30, Shaft: 35mm
WILLEMIN MACODEL W408 MT CARACTÉRISTIQUES TECHNIQUES : Année : 2007 Type de CN : FANUC 16i-MB Nombre d'axes : 5 Course axe X : 250 [mm] Course axe Y : 200 [mm] Course axe Z : 300 [mm] Vitesse déplacement rapide X, Y et Z : 30000 [mm/min] Diamètre maxi. en barre broche de tournage : 32 [mm] Vitesse maxi. broche de tournage : 6000 [tr/min] Puissance maxi. broche de tournage : 3.7 [kW] Course angulaire axe C : 360 [°] Course angulaire axe B : 115 [°] Attachement broche : HSK-E40 Vitesse mini. broche 500 [tr/min] Vitesse maxi. broche : 30000 [tr/min] Puissance broche : 10 [kW] Nombre de postes magasin d'outils : 48 Longueur maxi. d'outil : 95 [mm] Diamètre maxi. d'outil : 63 [mm] Capacité bac d'arrosage : 80 [l] Débit pompe d'arrosage : 40 [l/min] Courant nominal : 25 [A] Tension d'alimentation : 400 [V] Poids : 1700 [Kg] ÉQUIPEMENTS INCLUS : ...
Colchester Univ. Lathe Master 2500 Center height 180 mm Center width 600 mm Bore (passage) 40 mm RSF 2-Axis Digital Display Type Z-550 incl. accessories
x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm control: Sinumerik 840D spindle turning speed - stepless: 20 - 18.000 U/min power capacity at 40 % load: 28,00 kW power capacity at 100 % load: 19,00 kW max. torque on the spindle: 121 / 82 Nm spindle taper: HSK-A63 B-axis: -10 - +180 ° c-axis: 360 x 0,001 ° feed X/Y/Z-axis: 20 - 10.000 mm/min rapid traverse X/Y/Z: 60,00 m/min feed B-axis: 1 - 10.800 °/min rapid traverse B-axis: 30,00 U/min size of pallet: 800 x 630 mm max. workpiece diameter: 800 mm workpiece height max.: 1.330 mm table load: 1,20 t toolpiece magazine: chain magazine: 180 Stück tool diameter: 80 mm tool diameter with 2 vacant positions: 160 mm tool length - max.: 450 mm weight of tools max.: 15,00 kg total power requirement: 57,00 kW weight of the machine ca.: 22,00 t dimensions of the machine ca.: 8,50 x 5,50 x H3,80 m 5-axis-machining center with SIEMENS Sinumerik ...
Marelli Motori AC Generator M7B 315 LD 4 AC synchronous generator from 1995 with 1,360 operating hours. 1 available 400 V/50 Hz – 575 KVA Manufacturer: MarelliMotori Model: M7B 315 LD 4 Type: AC Synchronous Generator Serial Number: MB5883 Power [KVA]: 575 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 830 Speed [1/min]: 1,500 Year of Make: 1995 Hours: 1360 Dimensions LxWxH [cm]: 1.40 x 0.90 x 1.20 Weight [kg]: 1.346
pressure: . t throat: . mm stroke: . mm total power requirement: . kW weight of the machine ca.: 4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dairy Machinery UK Farm Milk Cooling Tanks, Space saving, ergonomic design-chassis with solid leg construction and adjustable feet., Constructed completely from AISI 304 Stainless Steel, welded and polished to global food grade standards.Insulated with CFC free polyurethane, thickness varying from 38mm at the top to 100mm at the bottom, adding extra strength to the structure., Laser Welded S.S 304 Evaporator (0.9/1.5/2mm). Milk Cooling Tank consists of milk vessel made from 1.5mm S.S 304 and insulation vessel made from 1mm S.S 304., Detachable Butterfly valve-DN 50, SMS thread One piece top Lid made from S.S 304 with thickness of 1.5mm mounted with pneumatic springs to allow easy and safe opening and closing of the tank. Gear motor with micro switch for gentle agitation of RPM 30-36,1Φ-50Hz from Dairy Machinery UK, Make: Dairy Machinery UK, Model: FMCT-500 L , Capacity: 515 Litres , Coo ...
Dairy Machinery UK Farm Milk Cooling Tanks, Space saving, ergonomic design-chassis with solid leg construction and adjustable feet., Constructed completely from AISI 304 Stainless Steel, welded and polished to global food grade standards.Insulated with CFC free polyurethane, thickness varying from 38mm at the top to 100mm at the bottom, adding extra strength to the structure., Laser Welded S.S 304 Evaporator (0.9/1.5/2mm). Milk Cooling Tank consists of milk vessel made from 1.5mm S.S 304 and insulation vessel made from 1mm S.S 304., Detachable Butterfly valve-DN 50, SMS thread One piece top Lid made from S.S 304 with thickness of 1.5mm mounted with pneumatic springs to allow easy and safe opening and closing of the tank. Gear motor with micro switch for gentle agitation of RPM 30-36,1Φ-50Hz from Dairy Machinery UK, Make: Dairy Machinery UK, Model: FMCT-1000 L , Capacity: 1054 Litres , C ...
maximum number of results exceeded
please refine your search
