ma used for sale

x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm control: SLIMline Siemens Main spindle:: turning speed range - main spindle: 20 - 12.000 min/-1 power capacity - main spindel: 13 / 9 kW Torque: 83 / 57 Nm tool taper: SK 40 work table:: table surface area: 790 x 560 mm number of T-slots: 4 + 1 T-slot - width: 4 x 14H12 / 1 x 14H7 mm T-slot - distance: 100 mm max. table load: 600 kg table height over floor: 720 mm Tool-Presetter:: number of toolpositions: 20 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm max. tool weight: 6 kg Total weight, approx.: max. 60 kg feeds:: feed speeds: max. 20.000 mm/min rapid traverse: 30 m/min total power requirement: 17 kVA weight of the machine ca.: 4,0 t dimensions of the machine ca.: 4,5 x 4,0 x 2,8 m Documents: Chip conveyor: Coolantsystem: through spindle coolant: 12 bar Renishaw: exhaust fan:  ...

MATEC 30 HV CNC machining center was built in 2001 in Germany by Matec Maschinenbau GmbH. The machine, designed for precision machining of oversized workpieces, is equipped with a number of reliable components with excellent specifications. This includes a tilting work head, a 24-position tool magazine and a chip extraction unit. All this is complemented by the intelligent BOSCH CNC control, in which advanced machining programmes are created in just a few steps. The MATEC CNC vertical machining center weighs approximately 15000 kg. Technical specifications of the MATEC 30 HV CNC milling machine - CNC controller: BOSCH TYP 3 OSA - feed in the X/Y/Z axis: 3000/600/800 mm - maximum spindle rotational speed: 9000 rpm - minimum spindle rotational speed: 20 rpm - spindle drive power: 16 kW - tilting work head - rotation angle of work head: ± 90° every 1° - 24-position tool magazi ...

liter capacity: 980 l Pressure of pump: 8 / 20 bar total power requirement: - kW weight of the machine ca.: 560 kg dimensions of the machine ca.: 2,3 x 2,0 x 1,8 m Coolant System MAYFRAM - BFU 980 /S/20+/8 - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 2 - Pump capacity: 4.0 kW, 2,917 rpm, 5.8 m³, 96.6 l/min, pressure 25 bar, max. temperature 90°C -.- kW, 2,864 rpm, 2.0 m³/h, 33.3 l/min, pressure 25 bar, max. temperature 90°C The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: 980 l Pressure of pump: 8 / 20 bar total power requirement: - kW weight of the machine ca.: 560 kg dimensions of the machine ca.: 2,3 x 2,0 x 1,8 m Coolant System MAYFRAM - DPF400-V980 SKD (BFU 980 /S/20+/8) - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 3 - Pump capacity: 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temp. 90°C 3.0 kW, 3,514 rpm, 20.5 m³/h, 341.66 l/min, pressure 25 bar, max. temp. 90°C -.- kW, 2,864 rpm, 2.0 m³/h, 33.3 l/min, pressure 25 bar, max. temp. 90°C The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

M. No.: 91080-41861 Age : around 1994 Speed: first 70 Sec. / Following 52 Sec. Format (cm): 41,4 x 55 (max.) Equipment / Additional information: Plate width (cm): 22.9 - 41.4 Plate length (cm): 22.0 - 55 Maximum effective image size (cm): 40.4 - 54 Magnification: 100% Lens (cm): 25 Step and Repeat setter: Original side down Digital recording: 0 - 99 Light source: 1 Halogen-Diode, 80 V / 800 W Tank capacity: Activator 0.55 l, stabilizer 0.60 l Power supply: 200 V / 220 V / 240 V, 1.9 Kw High quality plate results: up to 133 lpi

Size: 530 x 740 mm Equipments: Color magenta 20 pieces Color Yellow 7 pieces Color Cyan 6 pieces Color black 6 pieces Ink duct foil 80 pieces Blade 4x ink rollers exchange parts various machine parts for Heidelberg CD 74

Operating Weight: 7,500 kg Engine: Kubota V2607 (EURO-compliant) Power Output: 42.4 kW (56.8 HP) at 2200 rpm Hydraulic Pump: PNM high-performance hydraulic pump Hydraulic Valves: HF & Parker control valves Bucket Capacity: 0.28 m³ Bucket Digging Force: 56 kN Arm Digging Force: 38 kN Swing Speed: 0–11 rpm Travel Speed: 2.8 km/h Gradeability: 70% (35°) Max Digging Depth: 3,898 mm Max Digging Height: 7,023 mm Max Dumping Height: 5,195 mm Tail Swing Radius: 1,730 mm Overall Dimensions (L × W × H): 6,054 mm × 2,216 mm × 2,672 mm

Operating Weight: 9,000 kg Engine: Cummins QSF2.8 (EURO V compliant) Power Output: 53 kW (71 HP) at 2200 rpm Hydraulic Pump: Hengli high-pressure pump Hydraulic Valves: Husco precision control valves Swing Engine: Eaton or Sunjin (Korea) Travel Motor: Eaton or PMP Hydraulic Working Pressure: 28 MPa Bucket Capacity: 0.4 m³ Maximum Digging Force: 58 kN Swing Speed: 0–12 rpm Traveling Speed: 2.8 km/h Gradeability: 70% (35°) Overall Dimensions: Length: 6,410 mm Width: 2,278 mm Height: 2,630 mm Undercarriage Width: 2,200 mm Ground clearance: 800 mm

Maplan 250ton Injection Machine Injection MTF 1500/250 Platen size = 630mm x500mm Stripper plate/ejectors =top only Max gap between platens = 702mm Volume = 1500 ccm3 Tonnage = 250T Year 2007

Maplan 160ton Injection Machine Injection MTF 750/160 Platen size = 510mm x 450mm Stripper plate/ejectors =top only Max gap between platens = 575mm Volume = 750 ccm3 Tonnage = 160T Year 2002

Mazak QTN 350M x 1200 Motorized Lathe :::TECHNICAL SPECIFICATIONS::: CNC Model: Mazatrol CNC Version: FUSION 640 T NEXUS Main spindle nose: ASA 8 Main spindle power: 22Kw Main spindle bar passage: 76mm Turning diameter: 420mm Turning length: 1173mm Number of main spindle speeds: 3300 Number of tool turrets: 1 Number of tool positions for the first turret: 12 Number of Motorized First Turret: 12 First turret X-axis travel: 260mm First turret Z-axis travel: 1240mm Presetting: yes :::D DIMENSIONS AND WEIGHT::: Length: 3450mm Width: 2050mm Height: 2000mm Weight: 7500Kg

Used Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list.

Used Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list.

Key data: 150 kg, 480 mm, 375 mm

Hammer weight: 150 kg Stroke length: 480 mm Stroke rate: 168 p/min. Projection: 375 mm Plunger diameter: 180 mm Origin: England Motor power: 11 kW Machine LxWxH: 200 x 180 x 240 cm Machine Weight: 6000 kg

Item condition: well-maintained Availability: immediately Description: see attached data sheet Capacity: 90 kg/h Machine weight approx.: 137 kg Volts/ Heart: 230 / 50 Overall length: approx. 990 mm Total height: approx. 660 mm

Reference ID PP-47879 Category 4-Colors Manufacturer Manroland Model 804-6 Year Built 1984 Color 4 Impression- Working Hours - Speed-- Max. size 100 x 140 cm Min. Size - Condition Good Location Europe Availability Immediately Machine Description 4 colors Alcohol-based dampening system remote control for ink register Quick action clamps RCI 2 powder spray

2 lactose decanter systems, One is from Sharpes, Alfa Laval Group, Machine built in 1990, overhauled Order No. ZM 6063/90, Masch, No. 2312 Speed max. 3250 rpm, drum diam. 355.6 mm The 2nd machine is from Geißel Maschinenbau GmbH 97246 Eibelstadt Masch. No. 2367 from 1992 Drum diameter 355 mm, speed max. 3,150 per min.

Two pieces of lifting watches for use with indoor cranes without weight indication of the load

x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm Control: HEIDENHAIN control: MillPlus iT table surface area: ø 500 x 380 mm B-axis: 0 - 161,955 ° C-axis: 360 ° spindle taper: SK 40 spindle turning speed range: 20 - 18.000 U/min spindle power: max. 35 kW max. torque on the spindle: max. 130 Nm feeds -stepless-: bis 20.000 mm/min rapid traverse X/Y/Z axis: 80 / 50 / 50 m/min rapid traverse B-axis: 40 U/min C-axis rapid feed: 50 U/min no. of tools in magazin: 30 tool diameter if 2 vacant positions: 130 mm tool diametre at full load: 80 mm tool length - max.: 300 mm weight of tools max.: 6 kg internal coolant system feed: 40 bar total power requirement: 52 kVA weight of the machine ca.: 6 t = 5-axis machining center with 2-axis NC swivelling rotary table Accessories: electron. handwheel, chip conveyor, coolant, band filter device The data for this ad was created with ModulMWS - the  ...

Manufacturer: Marini Type : Asphalt Mixing Plant Year of Manufacture: 1991 Control system: Miprotek 3000 Mixer: 2t Hourly output: 160 t/h Parallel drum: no Drum: 9m x D2.5m Silos: 3 silos (370t) - 100/120/150 Bitumen tanks: 2 x 60t + 1 x 30t horizontal Filler silos: 1 x foreign filler 60t Fillers: 2 x own filler 60t + 30t Dust extraction: 600m², 41,000 Nm³; 90 kW Burner capacity: 14 MW Find more here - / Contact us at -

Checkweigher Make: Bizerba Model; CWE Maxx Built 2017 Reject system Touch screen

Key data: 1350 KW

Power 1800 HP Engine type V type V12 Speed 2300 RPM Bore 128 mm

Fine boring head, spindle tool, boring head, bridge tool, fine boring headBoring tool, spindle headBoring tool, spindle headBoring rodReceptacle for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731 200Boring head for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-010Boring block for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-500Counterweight for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-600Tool holder: GRAFLEX Holder size G7 = 46 mmProcessing diameter: 200-280 mmAdjustment accuracy: 0.01

E-chain hoist, electric chain hoist, crane KITO type WLL 240 ManuliftManufacturer: KITO Yamanashi JapanCode No. ED 24ST Series No. 00005266 Year of construction 2008Load capacity 240 kgHook travel 2.7 metersDistance suspension to load hook 950 mmLifting speed Lifting speed: 3 to 12.9 m/min. Mains connection 230 volts, 50 Hz- cylinder handle control with potentiometer for speed adjustment- safety, stroke limit switch- emergency stopWeight 18.5 kgvery good condition; used

Column Drill IXION - MAXION Type Unimax 3Fabr. No. 201516 year of construction 2009Drilling capacity 30 mmSpindle holder MK 3 - short quillThroat projection 260 mmQuill stroke 125 mmTable size 360 x 500 mmColumn diameter 110 mmSpindle speed 80 - 3200 rpm. infinitely variableMotor power 0.8 / 1.5 kWWonnection connection 400 volts, 50 Hz- Spindle speed via 2 V-belt steps, 2 motor speeds and infinitely variable via variator drive- Motor speed level 1 for clockwise and counterclockwise rotation, motor speed level 2 for clockwise rotation - handwheel

Centrifugal fan REITZ type MAE 045-017030-00Fabr. No. 601438 year of construction 2017Volume flow 10200 m³/h = 170 m³/min. Pressure p 1.2 kg/m³Air inlet 300 mm (nozzle diameter in the base plate)Air outlet 345 x 345 mmEngine speed 2940 rpm. Motor power 18.5 kWNet connection 400 Volt 50 Hz- fan wheel with 8 fan blades- directly flanged drive motor- flange dimensions for air outlet 450 x 450 mm- stable metal housing made of 8 mm steelSpace requirement L x W x H 1930 x 1240 x 950 mmWeight

Centrifugal fan REITZ type: MAE 031-007130-00Fabr. No. 601475 year of construction 2017Volume flow 4260 m³/h = 71 m³/min. Pressure p 1.2 kg/m³Air inlet 250 mm (nozzle diameter in the base plate)Air outlet 245 x 195 mmMotor speed 2915 rpm. Motor power 7.5 kWNetz connection 400 Volt 50 Hz- fan wheel with 9 fan blades- directly flanged drive motor- flange dimensions for air outlet 310 x 260 mm- stable metal housing made of 5 and 6 mm steelSpace requirement L x W x H 1390 x 1030 x 600

E-chain hoist, electric chain hoist, crane KITO type WLL 240 ManuliftManufacturer: KITO Yamanashi JapanCode No. EDC 24SD Series No. 032190 Year of construction 2017Load capacity 240 kgHook travel 2 metersDistance to suspension to load hook 850 mmLifting speed 3 to 12.9 m/min. mains connection 230 volts, 50 Hz- cylinder handle control with potentiometer for speed adjustment- safety- stroke limit switch- emergency stopweight 18 kgvery good condition; used

Max. cutting height: 100mm, saw blade diameter: 250-400mm, bore: 30mm, carriage length: 2600mm, motor power: 5.5kW, length: 3100mm, width: 2400mm, height: 1500mm, weight: 770kg. On-site inspection is possible.

Various woodworking machines from different manufacturers are available. 1) Max Striffler type 2750 double mitre saw, year of manufacture: 1983. 2) Stegherr KSF-V universal cross rung miller, year of manufacture: 1991. 3) Stegherr SDB dowel drilling machine for frame constructions, year of manufacture: 1988. 4) Axel Wirth LW 100.5/300, year of manufacture: 2008. 5) Ruchser RU-EBL2.5-M fitting drilling machine, year of manufacture: 2001. 6) Max Mayer (MAKA) STV 170 oscillating chisel mortising machine, year of manufacture: 1994. 7) Max Mayer (MAKA) STV-71 oscillating chisel mortising machine, year of manufacture: 1987. On-site inspection is possible. The machines are only available as a package.

A welding cell including robot and welding machine is available. Table dimensions X/Y: 1800mm/900mm, max. workpiece height: 800mm, switching hours: 5250h, operating hours: 1244h. 1) Robot Fanuc ARC Mate 100iBe, year of manufacture: 2006, payload: 6kg, max. reach: 1373mm, repeat accuracy: +/-0.08mm, weight: approx. 238kg. 2) Welding machine Fronius Magic Wave 4000, year of manufacture: 2006. On-site inspection is possible.

Capacity: 50kg, max. operating temperature: 400°C, heating capacity: 3kW, insulation thickness: 80mm, diameter: 710mm, height: 1175mm, weight: 75kg. Documentation available. On-site inspection is possible.

Multivac T700, The dimensions of the trays are 187x137 ( approx.) and 145x125 (approx.).

Herma automatic labeling machine

Jasa 350 vertical bagging machine, The Jasa 350FV is a versatile, capable and reliable vertical packaging machine, Robust design, ideal for medium to large production volumes., Specifications, - Maximum Speed: 35 to 40 packages per minute, depending on the product and film settings., - Wrapping Film: Suitable for various types of films, such as PP, with the option for both barrier films and regular films., - Dimensions: The machine has a compact design, but the exact dimensions may vary depending on the specific configuration., - Cutting Mechanism: Automatic cutting mechanisms for precise sealing of the packages., - Settings: Digital settings for speed, temperature, and product configurations., - Temperature Control: To ensure optimal sealing, the temperature of the film machine is automatically regulated, providing reliable packaging., - Packaging Size: Various formats supplied from sto ...

A complete painting system is available. Components: (1) overhead conveyor, (2) spraying area/brush wall, length: 4000mm, width: 1500mm, height: 4800mm, with Maxon burner, suction pipe, drawers for dry paint disposal, six filter mats, various filters, (3) evaporation area, (4) drying booth, length: 6500mm, width: 5200mm, height: 3150mm, with Weishaupt WG10N/1-D ZM-LN gas burner. Overall system dimensions: 24,000mm/10,000mm, max. output: 45kW. Documentation is available.

An ultrasonic welding system with two Telsonic TSP-3000-1P, cabin, generators and documentation is available. Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Siemens SIMATIC PANEL, length: 762mm, width: 854mm, height: 1316mm, weight: 130kg. On-site inspection is possible.

Équipement de distribution Schneider Merlin GERIN Masterpact circuit breaker. Batch of 17 circuit breakers avalable, possible to sell individually. Disjoncteur : M20N1 Circuit breaker 3 Piece Disjoncteur : M16N1 Circuit breaker 1 Piece Disjoncteur :M25N1 Circuit breaker 1 Piece Disjoncteur :M10N1 Circuit breaker 3 Piece Disjoncteur :NW12N1 Circuit breaker 3 Piece Disjoncteur :M32H1 Circuit breaker 2 Piece Disjoncteur SEL PACT DN 2 Circuit breaker 1 Piece Disjoncteur compact NS1250NA Circuit breaker 2 Piece Disjoncteur CM 1250 Circuit breaker 1 Piece

The Macchi 3 layer Film Blowing Machine PLASTEX model is a compact line for a top quality film production with a range up to 350 kg/h and a film width of 1.650 mm. This production line of 3 layer co-extrusion blown film extruder produced by MACCHI can be used for the production of a wide range of general packaging films as it allows to achieve a high output and a significant level of productivity and flexibility.

length: 5000 mm payload: 18 : . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Two rolling mills for thermosetting plastics are available. 1) 2x identical rolling mills Berstorff (Krauss Maffei), year of construction: 1959, drive wheel renewal: 2000, working width: 1200mm, roll diameter: 400mm. 2) Big bag frame with electric chain hoist. 3) Suction blower. 4) Engelsmann screening plant. 5) Glass fiber dosing devices. 6) Conveying units, control system and screws. 7) Krauss Maffei test laboratory roller for color determination. Without shredding units. Documentation available. On-site inspection is possible.

Working width: 630 mm Dimensions (L/W/H): 115x110x120 mm turning speeds: 5000 U/min connected load frequency: 380 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 280 mm saw band length: . mm cutting width: . mm total power requirement: . kW weight of the machine ca.: 1 t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Heidenhain TNC 407 serial number: 60/1997 x-travel: 1.000 mm y-travel: 600 mm z-travel: 700 mm : TISCHMAß: 1300 X 600 mm : Werkzeugwechsler: 24- fac The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 7,5 kW feed pressure: 10 bar weight of the machine ca.: 300 kg : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 310 mm y-travel: 340 mm z-travel: 170 mm total power requirement: 2,5 kW weight of the machine ca.: 900 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 630 mm y-travel: 500 mm z-travel: 500 mm Control: CNC total power requirement: 13 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 t distance between columns: 500 mm stroke: 200 mm total power requirement: 10 kW weight of the machine ca.: 4.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: . kW volt: . V ampere: . A Ui: 375 V S1: 3000 /min Holding brake: EBD 4M 24V- 34W Made in Germany: : See type plate The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 15 / 18 mm throat: 180 mm bore stroke: 80 mm turning speeds: 200 - 4000 U/min : 250 x 220 mm distance drilling head - clamping area: max. 380 mm total power requirement: 1,1 / 400 kW / Volt column diameter: 65 mm tool taper: MK 2 weight of the machine ca.: 0,08 t dimensions: 0,4 x 0,5 x 0,9 m precise bench drill: - Large speed range - Programmable thread cutting - high accuracy and quality - Drill table adjustable via rack and swiveling around the column - Full engine protection - Star grip - 230 volt mains connection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.