ma used for sale

Micrometer, micrometer screw -Measuring range: 75 - 100 mm -Accessories: see photo -other sizes: available -Dimensions box: 265/125/H25 mm -Total weight: 0.8 kg

wire electrode, welding wire, welding wire -Manufacturer: Magmaweld, MAG wire electrode SG 2 CY 4243 -Type: MG 2 Ø 1.2mm -Dimension: Ø 300 /100 mm -Weight roll: 15.5 kg -Number: 1 piece available

Filter system for low-viscosity liquids Manufacturer: Mahle Type: AF11363-1321-21000-3864/G1 All information without guarantee

Spectrallight Gretag Macbeth Spectralight III uses a patented filtered tungsten halogen daylight source. This means that it contains an even balance of color energy, just like natural daylight. The more even the balance of color energy, the more accurate the light source makes color. This color energy is displayed in a spectral power distribution curve (SPD). If your light source doesn't match the SPD curve for natural daylight, your ability to evaluate color is distorted. That means you could approve color that your customers reject and vice versa! Manufacturer: Gretag Macbeth Type: SPL III Further data: see also photos All information without guarantee

Hydraulic Owner: Mahle Pressure capacity: 110 bar Flow rate: 32 L/min 160 l/min at 2 mWS 160L Tank

Strapping machine, packaging machine, strapping device, strapping set, dispenser, tape dispenser, cutting stand, vertical cutting stand -Cutting stand: vertical, mobile substructure -Cutting width: up to 1110 mm -Roll diameter. up to 660 mm -Dimensions: 760/667 / H1290 mm -Weight: 24 kg

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Gate valve: MAW type NW 40/32 ND 40 -Valve drive: Leibfried type LDA 309-1 pneumatic -Nominal pressure: 7 bar -Connection: inside Ø 40 mm -Dimensions: 375/150/H195 mm -Weight: 14 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Manufacturer: Martonair type RM/8125B/M -Stroke: 320 mm -Piston: Ø 125 mm -Piston rod: Ø 32 mm -Pressure: max. 16 bar -Dimensions: see drawing in the pictures -Dimensions: 835/142/H150 mm -Weight: 20 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Manufacturer: Martonair type RM/8125 B -Stroke: 500 mm -Piston: Ø 125 mm -Piston rod: Ø 32 mm -Pressure: max. 16 bar -Dimensions: 880/140/140 mm -Weight: 23 kg

Vernier caliper, caliper, vernier caliper -Manufacturer: Massi, Vernier caliper with fine adjustment according to TGL 9252 -Measuring range: 0-750 mm -Number: 2x calipers available -Price: per piece -Dimensions: 950/242/H13 mm -Weight: 2.2 kg/pc.

Bagel Machine / Bagel Machine Weight range 8" 60-85g /// 9" 85-130g ( max. 3600 pieces/hour ). New machine

Marel / AEW Delford weigh price labeler Model: 8160 Serial: 82012 2008, Stainless weigh price labeler, min weight 1.5kg - max weight 20kg, scale interval 1/2g, Max tare weight -1Kg, overall length 2750mm, belt width 200mm, weigh platform 200mm x 240mm, with spares and manuals, 1Ph

Tool holder, milling holder, milling tool, -Manufacturer: May, milling adapter: SK50 with fine adjustment -Type: FGK3/SK50/N M14-M30 -Dimensions: Ø 98 x 300 mm -Weight: 5.9 kg

Marine diesel piston, diesel engine piston -Piston: Ø 199 mm -Piston height: 265 mm -Piston pin: Ø 75 mm -Distance from center of piston pin to top of piston: 155 mm -Quantity: 2 pieces available -Price: per piece -Weight: 9.025 kg

Electric motor, three-phase motor -Power: 2.2 KW -Speed: 1425 rpm -Shaft: Ø 28 x 60 mm -Construction: B5 -Protection class: IP44 -Dimensions: 360/250/H270 mm -Weight: 29 kg

Power generator, emergency power generator, generator, power generator, power generator, emergency power generator -Electric start -Power: 3.8 kVA 50 Hz -petrol engine -only: 95 operating hours -2x Schuko: 230 Volt, 1 socket slightly damaged -Dimensions of unit: 580/530/H615 mm -Weight: 79 kg

transformer -Marcus: M3785OT 80C RISE -VA: 1000 VA -Frequency: 60 Hz -Voltage: 230/120 V -Price: per piece -Number: 2 pieces available -Dimensions: 160/130/H110 mm -Weight: 11.3 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 320 mm -Piston diameter: 80 mm -Piston rod: 25 mm -Max. Pressure: 16 bar -Price: per piece -Number: 2 pieces -Dimensions: 545/93/H93 mm -Weight: 6.75 kg/piece

x-travel: 900 mm y-travel: 800 mm z-travel: 970 mm Control: Fanuc type: PRO-3 tool taper: HSK 100 power capacity: 30 kW turning speeds: 12000 U/min rapid traverse: 50 m/min Tool changer: 90 Pos. Cooling through the spindle: 70 bar size of pallet: 630x630 mm Table load: 1200 kg rotary table tiltable: 1 Grad type of pallet-changer: 2 total power requirement: kW weight of the machine ca.: 20 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Martonair type: M3332 150 DF -Stroke: 150 mm -Piston rod: Ø 25 mm -Number: 2 pieces available -Price: per piece -Dimensions: 90/130/H640 mm -Weight: 9.7 kg/piece

x-travel: 800 mm y-travel: 750 mm z-travel: 770 mm Control: Fanuc type: PRO-3 tool taper: HSK 100 power capacity: 30 kW turning speeds: 10000 U/min rapid traverse: 35 m/min Tool changer: 90 Pos. Cooling through the spindle: 70 bar size of pallet: 630x630 mm Table load: 1200 kg rotary table tiltable: 1 Grad type of pallet-changer: 2 total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 750 mm z-travel: 770 mm Control: Fanuc type: PRO-3 tool taper: HSK 100 power capacity: 30 kW turning speeds: 10000 U/min rapid traverse: 35 m/min Tool changer: 90 Pos. Cooling through the spindle: 70 bar size of pallet: 630x630 mm Table load: 1200 kg rotary table tiltable: 1 Grad type of pallet-changer: 2 total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder -different recordings: 10 -from: WNT-Mastertool -Sale: only complete -Price: complete -Weight: 36 kg

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Mann air filter housing with: filter -Inlet/outlet: Ø 80/70 mm -Part Number: 43 905 63 8981 -Dimension: Ø 260/400 mm -Weight: 11.5 kg

Welding edge former, welding edge former, weld seam preparation, welding edge forming machine, edge milling device, edge milling machine, mobile milling machine -Bevel length: max. 20 mm -Dimensions box: 460/360/H355 mm -Weight: 24 kg

Bezel, setting stick, lynette -for: Crankshaft grinding machine -Technical drawing: see photos Quantity: 1 piece available -Dimensions: 380/85/H200 mm -Weight: 13.4 kg

Demolition hammer, chisel hammer, Bosch hammer, mortise hammer, pointed chisel -Length: 410 mm -Width: 36 mm -Hexagon socket: 30 mm -Price: per piece -Number: 6 pieces -Dimensions: Ø 46 x 460 mm -Weight: 1.7 kg/piece

Original Knecht filter (air filter), pre-filter, pre-cleaner, air filter -Turbo pre-cleaner -Filter with: 76 mm inlet -Dimension: Ø 193/270 mm -Weight: 2.1 kg

Compressed air dryer, refrigeration dryer, dryer, compressed air refrigeration dryer -Drying capacity 1200 L / min -Max. Pressure: 13 bar -Operating voltage: 240 V -Dimensions: 485/350 / H450 mm -Weight: 23.5 kg

Gears, spur gears, bevel gears, worm gears -Manufacturer: Mädler, bevel gear type E 080 B -Transmission: i 26.5 : 1 -Drive shaft: Ø 24 x 36 mm -Hollow shaft: Ø 38 x 140 mm -Number: 1x gearbox available -Dimensions: 243/140/H237 mm -Weight: 26kg

Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Manufacturer: Martonair, pneumatic cylinder type SM/925 -Stroke travel: 150 mm -Piston rod: Ø 25 mm -Dimensions: 440/75/H75 mm -Weight: 5 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Martonair, pneumatic cylinder type SM/925 -Stroke: 250 mm -Piston rod: Ø 25 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 545/75/H75 mm -Total weight: 5.8 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Martonair type: RM/8080 R -Piston: Ø 80 mm -Piston rod: Ø 25 mm -Max. Pressure: 16 bar -Stroke: 100 mm -Price: per piece -Number: 4 pieces -Dimensions: 92/92/H320 mm -Weight: 3.45 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp, impact cylinder -Stroke: 250 mm -Piston diameter: 6 inch -Piston rod: Ø 38 mm -Dimensions: 167/167/H555 mm -Weight: 22.45 kg/piece

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Martonair Type: M/60250B/250 -Stroke travel: 250 mm -Piston rod: Ø 10 mm (Connection: M10 x 1.5) -Quantity: 2 pieces available -Price: per piece -Dimensions: Ø 33/345 mm -Weight: 0.55 kg/piece

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Martonair type: 167-05 5000-1 -Piston: Ø 63 mm -Piston rod: Ø 20 mm -Max. Pressure: 16 bar -Stroke: 1150 mm -Dimensions: 75/75/1340 mm -Weight: 9.6 kg

drill diameter: 40 mm drilling length: 500 mm lip angle: 160 ° clearance angle: 1 - 10 ° toolpiece turning speed range: 42 / 28 / 21 U/min feed range: 0,6-1,2-1,5-3,0 mm/min grinding wheel dia. x width: 210 x 127 x 50 mm grinding spindle speed: 3150 U/min total power requirement: 3,3 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 1,0 x 1,0 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fan, fan, electric motor blower -Fan electric motor: 2000 W -Speed: 2850 rpm -Voltage: 380 V -Protection class: IP 54 -Price: per piece -Number: 4 pieces -Dimensions: Ø 160/325 mm -Weight: 17.2 kg

Drill stand, drill stop, drill press stand, drill jig, drill bushing jig -Quick release device -Max. Height: 100mm -Dimensions: 400/240/H220 mm -Weight: 22 kg

power capacity: kW volt: V ampere: A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm Control: Heidemhain type: 426/430 spindle speed:: 18000 spindle taper: HSK 63 surface area: 1250x700 mm Rotary table: 700 mm Table load: 1000 kg b-axis: Schwenkopf 0,001 ° c-axis: 0-360° Rundtisch 0 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 400 mm turning length: 600 mm control: swing diameter: 600 mm spindle bore: 73 mm chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t no. of strokes: 30-70 Hub/min Max ram stroke: 130 mm ram adjustment: 100 mm table surface area: 950x630 mm ram surface: 630x600 mm throat: 340 mm dayligth: 480 mm coil: GSW total power requirement: kW weight of the machine ca.: 8,9 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting height: 205 mm Motor output: 11 kW cutting width: 450 mm Cutting length: 5200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Respiratory protection filters -Art. No.: 500 01 67 A2B2-P3 -Price: per piece -Quantity: 8 pieces -Weight: 0.5 kg/piece

Stop, depth stop, length stop for lathe -Groove opening: 22 mm -Number: 1x keystrokes available -Price: per piece -Dimensions: 130/110/H50 mm -Weight: 2.4 kg

x-travel: 800 mm y-travel: 650 mm z-travel: 550 mm control: Heidenhain Millplus tool taper: SK40 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: . kW volt: . V ampere: . A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 300 mm turning length: 1500 mm control: FanucSystem 6 T total power requirement: kW weight of the machine ca.: 5 t dimensions of the machine ca.: 4x2x1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vacuum pump, rotary vane pump -Drive: 1.1 kW -Flow rate: m³/h -Max. Pressure: mbar -Speed: 2800 rpm -Input: 2x Ø 35 mm -Output: 2x Ø 35 mm -Price: per piece -Number: 1x available -Dimensions: 470/300/H315 mm -Weight: 33 kg