ma used for sale

Used Makrum cone crusher company, type 44.51. Available 2 pieces. In addition, two new cones. Cone crushers are used for crushing of hard and mean, for example. Basalt, granite, metal ores, diabase, quartz, limestone, sandstone, cement clinker. These materials may not may not have a clay-clay impurities in an amount greater than 5% and a humidity of more than 10%. Crushers are used to prepare the materials for the construction of roads, railway embankments, as well as pre-grinding materials, subject to further processing in other devices, eg. In mills. Hydraulic cone crushers have internal support team cone crushing. Adjusting the exit slot is controlled hydraulically, and read from the console. Hydraulic overload protection automatically disappearance of the inner cone and its return to the original position after the resignation of overload.

Homogenizer IUL instruments masticator modell: µ-Prozessor technical details: engine: induktion rotation speed: 500 - 1500 rpm speed increaser: 1:6 strokes/Sec.: 3.0 - 8.5 / 50 Hz 3.0 - 9.9 / 60 Hz voltage: 230 Volt ; 50 Hz / 110 V ; 60 Hz Leistung: 270 Watt dimension: l x w x h: 420 x 262 x 322 mm weight: 20 kg

Manifold System Satorius with 3 stainless steal funnel (100ml) for microbiological research

Used jaw crusher Makrum company, type 40.17 Specifications:   1.Wielko inlet -800x1000 mm.   2. The adjustment range of the gap outlet - 80/18 mm.   3. Max. the size of the input material - 750 mm.   4. Performance - 35-90 m3 / h   5. The power of 75 kW drive motor.   6. The weight of the largest unit 14 T.   7. Weight crusher 38.1 T. Jaw crushers are used for crushing of hard and mean, for example. Basalt, granite, metal ores, quartz, glass cullet, limestone, sandstone, cement clinker, etc. These materials may not have a clay-loam dirt more than 5%, and humidity more than 10%. Wide range of sizes crushers and their technical parameters allow you to apply them in different nodes crushing - from the initial node crushing until the final product.

We can also repair your engine cheaply and according to your needs with full warranty. Mail=info@miw-zeven.de

ECO TS10 Deflashing Machine Year 1991 +/-

Manufacturer:ZM Zwickauer Maschinenfabrik Year: 1993 Power: 30 kW Allowable Operating Pressure: 8 bar Rotation speed: 5870 1/min Technical data of supply fan: Manufacturer: ILKA VEB Turbowerke Meißen Type: Lann 500 Year: 1991 Weight: 28 kg Flow: 1,43 - 1,94 m^3/s The total increase in pressure: 358 - 177 Pa Fan rotation speed: 1450 1/min Power: 0,7 kW Technical data of motor: Manufacturer: VEM Elektromotorenwerke Thurm Type: YP 1G4 Rotation speed: 1380 obr/min Power: 0,75 kW Voltage supply: 220/380 V 50 Hz The current consumption:3,45 / 2,0 A Weight: 11 kg Technical data of transformer: Manufacturer: TuR Transformatoren und Rontgenwerk Type: SVS 372 Year: 1991 Power: 37 kW Voltage supply: 380 V Control voltage: 220 V Nominal current: 72 A

The machine is technical and geometrically in a very good state. it was till 2years in use an application and any time inbetrieb are taken. Grter draggable Durchme?er 60 mm the smallest tench-cash Durchme?er 0.5 mm Schleifscheiben-Durchme?er 356 mm Schleifdcheiben width 150 mms control disc-Durchme?er 254 mms control discs width 150 mms Drehzahl-Schleifscheibe 1,780 revo impulse achievement main engine 7 kW speed-control disc 20-250 revos weight 2,900 kg Platzbetarf 8 m²

complete debarking plant Matelest, including mechanisation and control station. Type EM90 Infeeding up to 40 m/min. Motor 37 kW Log diameter 100-900 mm 4 hard netal knifes Continiursly reconditioned. Very good condition.

Precast Modular House Machine, Low Cost Precast Concrete House our used lines meets after reinstallation by us the Definition RETROFIT ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobiltel.: +43-664-3358378 office@machines-plants.at www.machines-plants.at Affordable housing Low-cost housing - Hotels - housing estates - residential developments - residential areas & complexes – single housing – low cost housing Günstige Häuser - Low-Cost-Häuser, - Hotels - Wohnsiedlungen - Entwicklungen v. Wohngebiete und Komplexe - Einzelhäuser - preiswerte Wohnungen Cmodul-3D Austria we can offer NEW also C Module dim. 3000 mm x 6000 mm (c-module)NEW MOULDS Affordable houses - low cost living space Low cost housing I am proud to introduce now our improved system for the construction of affordable houses. S ...

Cat. No. 12-1160 in very good condition Measurements and Weight: LxWxH: 80x40x105 cm Weight: 30 kg Manufacturer: Maselli Misure Process Analisers Model: UR 6 W AL Serien-Nr 30384 Range 40 150 0 Temp: 20°C Voltage: 220 V For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Standard

CLEANING BANK: BILLET SIZE: DIA. 160 MM x 9.15 M, ROTATION ANGLE: 90°, STACKING & PACKING DEVICE: BILLET SIZE: SQUARE: 50-160 MM; LENGTH: 2.5 - 9.0 M,

Cartons for standing products

Cat. No. 13-0048 in a very good condition Testing water by 22°C back pressure at 1 bar Pressure: 3,2 bar capacity: 7.800 litres/h Motor: 7,5 kW Connection: inlet/outlet: DN 65 according to DIN 32676 - can be changed on request for an additional charge Measurements: length: 140 cm width: 44 cm height: 95 cm weight: 300 kg All prices are valid Ex-works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from 97753 Karlstadt-Karlburg Subject to prior sale

The MATEC HMS-350 Kleinshredder for professionals, with hammer mill is suitable for crushing of green waste, etc. All types of green waste such as bouquets, garden waste, potted plants, compost in each State, agricultural waste, Earth, cemetery waste, large wood chips and small wood waste, etc. can thus be crushed. The hammer mill is equipped with impact tools made of HARDOX, the appropriate anvil blow bar and the following "data" also made of HARDOX. The content of flower pots, flower boxes, "baked together" grass cutting, etc. can thus be crushed. The combination of anvil blow bar before calibration and subsequent anvil calculation for fine crushing results a high throughput capacity with a small expenditure of energy. Electric motor 7.5 kW, a diesel engine can 3x400V, 50 Hz, power outlet connection euro 32 A request be built up 350 mm diameter insertion slot flight circle diame ...

The ECOSTAR 8 slices hacker with diesel drive 35 HP, 3 cyl., with an increased swivel discharge for horticulture, wine fruit, forestry, agriculture, etc. at a cheap price. With 2 blades, disk diameter 605 mm, disc speed 1200 rpm, JD diesel engine 3100, 3 cyl, 35 HP, water-cooled, feed height 200 mm, max wood diameter 200 mm, Einzugbreit 225 mm, hopper opening 600/600 mm, output per hour 5-8 cubic metres. The machine is ready for use within 1 minute. The chips can easily be abandoned on the bridge of the towing vehicle. The tedious tying of the branches fall away. Take the chips only 1 time in the hands. Watch the video movie in matnews91 on YouTube: ECOSTAR diesel JD3100 8. Price does not include trailer euro 9' 390.00 Expressly subject to technical changes, prior sale and error! Shipping costs CH / DE trucked approximately euro 280.00 MATEC systems + technology GmbH K ...

Dimension of sliding table- 1600x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Weight: 650 kg Transport dimensions - 1800x1000x1200mm Using the blade 400mm, the smaller should be removed. Reduced saw blade should be used with not more than 350 mm main shield.

New. Designed for bed slats stress tests. Power consumption: 230 V The clamping force adjustable from 2 to 10 bar (till 200 kg). Inspection speeds of ~ 40 pcs. / Min. The adjustable length of the product. Simple service. Lamelle test labeled. Marking the label may change. Manufacturer Ltd. MS Import, Lithuania.

Type: SPS 2" No.: 32990992 Stöber gear N1-n2 = 120-602 min-1 Type: R47-1029-220-4 No.: 1012558 Engine power: 2,2 kW Dimensions: LWH = 1200 x 400 x 800 mm moveable frame Stainless steel cover

Wood chopper f. tractor PTO wood chipper ECOSTAR 8 as a kit for the self-Assembly (image mounted with other rotating device) - feeder height width 20/20 cm - upper feed roller with belt drive - disk hacker with 2 knives and 1 counter knife - rated about 5 cubic metres chip length nominal 15 mm - CE compliant - PTO - rotating ejector - delivered in metal crates -Warranty: 2 years on all non - consumable - options for an additional fee: - machine Assembly by supplier - pulverizing integrated to avoid excess - special execution for the manufacture of Pelletschnitzeln with 6 mm length - professional Rotary chute which together does not rust and freezes at Sub-zero temperatures, with lever - built diesel drive 35 HP - electric motor 15 kW model changes built up which are not exactly the figurative representation are reserved! Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfe ...

QTY. 2 CONTAINERS, OD 655 x ID 250 MM x 560 MM LONG & OD 522 x ID 180 MM x 560 MM LONG, PIRCER DIA. 63 MM,

1. STRIP WIDTH: 700-1550 MM, THICKNESS: 0.3-3.0 MM 2. STRIP WIDTH: 650 MM, THICKNESS: 0.1 MM 3. FOIL WIDTH: 650 MM, THICKNESS: 0.1 MM 4. FOIL WIDTH: 680 MM, THICKNESS: 0.06 - 0.200 MM 5. FOIL WIDTH: 650-800 MM, THICKNESS: 0.007 - 0.065 MM

The New. ų l ū the tables for tests. Electric ą 's benefit: 230 V. Pressure (j) ė ga adjustable from 2 up to 10 bar. The speed ~ 44 PCs./min the event is governed by the product of the Į ilg į. A simple room. ė table at the time of the test (s) shall be identified. ym ė-ą character can be changed. The Manufacturer JSC MS Import, Lithuania. Video į ra as: abc://abc.youtube.com/watch?v=AqElqGkB7_c&feature=youtu.be

Four nearly new moulds for garden wall and fence.

Manufacturer: MAN GHH Power supply: 400 V / 50 Hz Power capacity: 500 kg Lifter for cutter trolleys 200 L Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

size 59 x 74 cm Perfecting 8/0 - 4/4 Color-Pilot-Plus ink control system AIR Center (Rietschle) Technotrans temperation Technotrans combi cooling device with external condensator washing device for printing cylinder Quickstart Low Coverage stabilisation Powder (Hitronic) Inline Observer Optiprint Jackets preparation for colour temperation Non Stop semiautomat delivery Still in operation: Yes Available: sofort

<br>Spinner for ECRM MAKO 46/36 HS, ECRM VR 36/46-HS, 30,000 RPM, with waranty.<br><br>Still in operation: No.<br>Available: Yes

<br>Spinner for ECRM MAKO 46/36,VR45,VR36, 32,000 RPM, refrushed 2012, with waranty.<br><br>Still in operation: Yes<br>Available: Yes

<br><br><br>Still in operation: Yes<br>Available: immediately

MATEC Stappler tipping bucket type 2 The tipping bucket can be locked with a bolt with cotter pin so no tipping is possible. The tipping buckets can be supplied also with a hydraulic tilting device. The blades are 1950 mm wide and type 2 1300 mm deep. The standard blade height is 450 mm. Solid wall or lattice towers can be ordered as accessories. The nominal weight of the shovel is 2000 kg. Each blade has 4 lifting eyes for crane handling. 4 mm thickness, corners and a replaceable wear bar reinforced permit prospecting. Other blade dimensions are possible upon request. Year 2017 New machine Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041  ...

1 piston overtakes MAHLE

Liners Wear less than 0.05

NEW PIV GEAR BOX IN 2006, 6 DECOILERS, MAX. LENGTH: 1400 MM, 70 - 800 GSM Still in operation: No Available: IMMEDIATELY

6-color size 900 MM ROTOPAK 1/S, 50 - 200 GSM, WEB WIDTH: 820 MM, ROLL DIA. 800 MM, Still in operation: Yes Available: IMMEDIATELY

6-color size 900 MM ROTOPAK 1/S, 50 - 200 GSM, WEB WIDTH: 820 MM, ROLL DIA. 800 MM, Still in operation: Yes Available: IMMEDIATELY

6-color size 720 mm TYPE: 500, 6 INTAGLIO + 1 FLEXO, PAPER & FOILS 50 - 150 GSM, ROLL DIA. 800 MM WIDTH: 750 MM; Still in operation: Yes Available: IMMEDIATLY

DECOIL DIA.: 1000 MM, COILER DIA.: 800 MM, WIDTH: 1000 MM, GRAMMAGE: 180 GSM, Still in operation: No Available: IMMEDIATELY

Cylinder head Exchange

Cylinder head Exchange

Cylinder head Exchange

Mapelli 300ton downstroke hydraulic presses with vacuum, Type T300, year 1990, 4 column type, with pneumatic front guard, fixed guards to sides and rear, main ram dia 450mm, with pull back rams, single daylight 500mm, with 600mm wide x 700mm electrically heated platens. With hydraulic power unit mounted on top. Complete with controls etc and in good condition.

Injection pump in Exchange

Cylinder head Exchange

Basket valve in Exchange

Bushing obsolete, recon

Turbocharger - recon

Maja SA 400, ice machine, capacity: 400 kg in 24 hours, refurbished. The machine is immediately available, and can be tested in Koblenz, Germany.

Liner without APR - almost new

Best price 4150 Eur (EXW Jonava, Lithuania) Buying this machine, dust exhausting system HOLZMANN ABS 3880 only 320 Eur (EXW Jonava, Lithuania) or HOLZMANN ABS 2480 only 250 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 2800x375mm Gross cut capacity- 2800mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 125mm Height of cut (45°) - 115mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Main motor - 5,5 Kw Saws lifting, up and down, electrical control. Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Transport dimensions - 2800x1000x1100mm Weight - 800 Kg