126,708 used machines on RESALE, but how to find them? Machine Search
Mounting plate with Martin M03 mount and retaining lug, - Recording: Martin M03, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock
Mounting plate for Hammer HM250 with Martin M03 mount, - Suitable for Hammer HM250, - Recording: Martin M03, - Hole pattern: 29 x 29 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock
Mounting plate for Hammer HM250 with Martin M03 mount, - Suitable for Hammer HM250, - Recording: Martin M03, - Hole pattern: 29 x 29 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock
Mounting plate for Hammer HM250 with Martin M03 mount, - Suitable for Hammer HM250, - Recording: Martin M03, - Hole pattern: 29 x 29 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock
Mounting plate for hammer HM100 with Martin M03 mount, - Suitable for Hammer HM100, - Recording: Martin M03, - Hole pattern: 26 x 26 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock
Mounting plate for hammer HM100 with Martin M03 mount, - Suitable for Hammer HM100, - Recording: Martin M03, - Hole pattern: 26 x 26 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock
NEW, 50 cm width, with Martin M03 mount, 78 kg dead weight, suitable for 2.8 - 3.9 t excavators
Year of construction: 2000 CNC controller: '3D contouring control Millplus Axes X-axis travel mm: 1250 Y-axis travel mm: 880 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) Feed rates m/min: 40 Rapid traverse m/min: 40 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø1000 Max. workpiece weight kg: 1000 max. torque Nm: 7900 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 15/10 (40%ED/cont) Cooling Tank capacity: 600 Tool system Tool holder: CAT 40 Tool magazine slots: 60 Tool changer: Doeble gripper Equipment Electronic Handwheel Chip conveyor Internal cooling lubricant supply Rotating inspection windows Rinsing gun Preapared for RENISHAW sonde Accuracy package Ready for internal cooling (40/80 bar) Paper band filter Machine running times Under power: 33831 Spindle Working: 6328 Rate ...
Key data: 800 mm, 700 mm, 600 mm
Year of manufacture approx. 2002 CNC control MillPlus Plate changer Yes (2-fold) Swivel table No Tool magazine 60 places IKZ/HD cooling Yes Chip Conveyor Yes
Key data: 1600 mm, 1250 mm, 100 mm
Control: HEIDENHAIN iTNC 530 Spindle: 18,000 rpm, HSK-A63 Rapid traverse: 60 m/min | Working feed: 20–15,000 mm/min Table size: 1,500 × 1,250 mm (L × Q) Workpiece weight: up to 4,000 kg Table speed: up to 10 rpm Tool Magazine: 60 Slots Machine weight: approx. 34 t
Key data: 1800 mm, 2000 mm, 1100 mm
Large 5-axis universal/gantry machining centre for heavy workpieces Technical key data (typical, depending on variants): Table/load capacity: NC rotary table approx. 1,700 × 1,400 mm, up to approx. 5,000 kg Head/table axes: Swivel milling head B 0–180°, C 360° (resolution up to 0.001°) Spindle: up to approx. 10,000 min⁻¹, HSK-A63 Tool magazine: usually ~60 places Control: often Heidenhain TNC 430 (built in 2003) Peripherals (common): IKZ/HD cooling, chip conveyor
Year of construction: 2013 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 450 Y-axis travel mm: 580 Z-axis travel mm: 400 C-axis degrees: 360º (0,0001) A-axis degrees: +10 / -110º Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 13 Milling/turning table nc: Number of pallets: System 3R (21 pallets type GPS 240, 30pallets type GPS 120 and 24 pallets type ITS50) Table dimensions mm: baseplate for root pallet Maximum workpiece size (D x H) mm: for pallet GPS 240 (275x275x200mm); for pallet GPS 120 (150x150x200mm) and for pallet ITS50 (ø70x200mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Spindle speed rpm: 28000 Spindle drive power kW: 35/25 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 120 T ...
Counting forklifts / compensating stackers Max. format: 500 x 340 mm, number of pages tabloid 96, broadsheet 48 Min. format: 148 x 105 mm, number of pages tabloid 4, broadsheet 4 Can handle single specimens (distance min. 10 mm) or scale current (distance min. 40 mm). Lateral offset max. 5 mm. Specimen thickness max. 6 mm / Flow height max. 10 mm Layer height max. 170 mm / Package height max. 350 mm Height inbound min. 500 / Height of infeed conveyor max. 1250 mm
1 JAMES HEAL Martindale abrasion resistance and pilling testing machine, 4 testing positions,
General SKU337U827 LocationBarneveld MakeServolift TypeHF No.10890 Year of construction2004 Main Features MaterialStainless steel Motor1.5 KW Height3950 mm Specified Features - Lifting/tilting machine MaterialStainless steel 1.4301 (304), Stainless steel 1.4541 (321) Lifting + tilting machinecheck Max. weight200 kg Lifting heightMin. height 440mm, max. height 3950 mm Hydraulic drivecheck With hydraulic unitcheck Lotz, Type: MC4 Motor230/400 volt, 1,5 kW, 1450 rpm Suitable for product sizes load drum diameter 560mm Information Total height5,3 m CEcheck With switchcheck Floorspace1x2,2 mLifting/tilting machinesServoliftConveying systems > Lifting/tilting machinesBrand > Servolift What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect th ...
General SKU054E249 LocationBarneveld MakeL.B. Bohle GmbH Ennigerloh TypePharma Hubsaul HS-200 Ex No.280 Year of construction1987 Main Features MaterialStainless steel Motor0.75 KW Height2395 mm Specified Features - Lifting/tilting machine MaterialStainless steel Lifting machineStationary lifting column (1x) Max. weight210 KG Lifting height2395mm (outlet height) Hydraulic drivecheck With hydraulic unitcheck Motor0,75 KW Information With switchWith 2x Pharma container type PC-250 Floorspace1,8x0,8 M Total height3,5 M Extra Specifications- 2x container dia. 700x400mm, Conical bottom 530mm, Outlet dia. 200mm Lifting/tilting machinesL.b. BohleConveying systems > Lifting/tilting machinesBrand > L.b. Bohle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are ...
General SKU397M493 LocationBarneveld MakePentavac srl TypePENTA 2100 No.820 Year of construction2001 Specified Features - Transwrap machine Transwrap machineSealer and filler Contact parts stainless steelcheck With dosingcheck MakeOMAS Technoistemi TypeDEL 1 No.0107011 Year of construction2001 Contact parts stainless steelcheck Information Mounted on framecheck With switchgearcheck Floorspace1,5x1,2 M Total height2,1 M Weight500 KGTranswrap machinesPentavacPackaging machines > Transwrap machinesBrand > Pentavac What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU236T269 LocationBarneveld MakeBohle TypeHS600 No.1020957001 Year of construction2011 Main Features MaterialStainless steel Motor0.55 KW Height3400 mm Specified Features - Lifting/tilting machine MaterialStainless steel Lifting machinecheck Max. weight600 kg Lifting height3400 mm Mechanical drivecheck Motor0,55 kW Information Total height3,2 m Weight650 kg CEcheck Floorspace0,8x0,7 mLifting/tilting machinesBohleConveying systems > Lifting/tilting machinesBrand > Bohle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU430W1387 LocationBarneveld Makeservolift Year of constructionunknown Main Features MaterialStainless steel Height500 mm Specified Features - Lifting/tilting machine MaterialStainless steel 1.4306 (304L) Lifting machinecheck Lifting height500 mm Hydraulic drivecheck Information Floorspace1,2x0,8 m Total height1,5 m Extra Specificationsinlet diameter: 700mm outlet diameter: 250 mm Lifting/tilting machinesServoliftConveying systems > Lifting/tilting machinesBrand > Servolift What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKUR0328 LocationBarneveld MakeBüter Hebetechnik GmbH (D) TypeH 11-06 No.A 11 11720 Year of construction2012 Main Features MaterialMild steel Motor1.5 KW Height600 mm Specified Features - Lifting/tilting machine MaterialMild steel Lifting machinecheck Max. weight1100 Kg Lifting height0,6 M Hydraulic drivecheck With hydraulic unitcheck Motor1,5 kW 400 Volt Information Total height0,7 M Weight750 Kg Floorspace2,5x1,6 MLifting/tilting machinesBüter Hebetechnik GmbHConveying systems > Lifting/tilting machinesBrand > Büter Hebetechnik GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU394U1145 LocationBarneveld MakeServolift TypeHS No.H337-12093 Year of construction2009 Main Features MaterialStainless steel Motor2.2 KW Height2850 mm Specified Features - Lifting/tilting machine MaterialStainless steel 1.4301 (304), Stainless steel 1.4306 (304L), Stainless steel 1.4541 (321) Lifting machinecheck Max. weight1000 kg Lifting height2850 mm Hydraulic drivecheck 150 bar Pneumatic drivecheck 6 bar With hydraulic unitcheck Motor2,2 kW (500 V) Information With switchcheck Weight1650 kg CEcheck Floorspace1,5 x 3 m Total height4,3 m ATEX compatiblecheck Extra SpecificationsSwing angle 180 degree. lifting stroke 1600mm Lifting/tilting machinesServoliftConveying systems > Lifting/tilting machinesBrand > Servolift What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any ...
General SKU382X963 LocationBarneveld MakePharmatech No.SL10244 Year of construction2001 Main Features MaterialStainless steel Motor2.5 KW Height3500 mm Specified Features - Lifting/tilting machine MaterialStainless steel 1.4301 (304) Lifting + tilting machinecheck Max. weight250 kg Lifting height3500 mm Mechanical drivecheck ( 0.25 kW to tilt the vessel) Hydraulic drivecheck (2.6 kW to lift the vessel) With hydraulic unitcheck Motor2.6 kW Suitable for product sizesDia 550 mm Lifting/tilting machines Capacity250 kg Information Mounted on framecheck With switchcheck Floorspace1 x 2 m CEcheck Total height3,8 m Weight1200 kg Extra SpecificationsThis hoist was installed in its original configuration with multiple accessories. - Pharmatech flexisieve 350 0.1m², SKU 382X961 (SOLD) - Pharmatech 2000 ltr double cone blender SKU 382X962 - Pharmatech floor scale, SKU: ...
Specifications: • 75 x 53 cm 6 mm Accessories: • PC workstation • DZDV PC TOUCHSCREEN PC 32" 9970460-20 incl. console • SLEEKING System HAK 100/Brother hot foil printer/finishing system Year of construction: 2024 Price: We ask for your binding offer Available from: immediately Terms of delivery: ex site – EXW Wiehl Payment Terms: Payment before pickup Accessories without guarantee. The following applies: "Object bought as seen". The prospective buyer must satisfy himself on site of the completeness of the property.
grinding length: 400 / 500 / 600 mm grinding width: 200 / 300 mm workpiece height: 300 / 350 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Type: MA16000/15800 Monitor: KEBA V3 Year : 2011 Screw diameter: 140 mm Shot volume: 9683 cm3 Injection weight : 8825 g Bettween tie bar HxV: 1550 X 1430 mm Maxi Mold Height: 1500 mm Min Mold Height: 700 mm Ejector stroke: 400 mm Total Clamp Open daylight: 3100mm 4 corepulling 4 Cascade Injection
Vivid Matrix MX-370P laminator with Omniflow Specifications: • Machine is already dismantled and stored • Laminating machine with manual system • Easy set-up • Fast and safe film roll change • Swing-out, patented control panel with monochrome display, control via buttons • Simple, self-explanatory symbolism • Easy feeding of the sheets with defined attachment point and automatic Scaling • Adjustable speed, temperature and roller pressure • "Anti-Curl Technology" – laminated arches that lie perfectly flat every time •Auto. Sheet separation after lamination • Compact design • Ideal for business cards, book covers, flyers, brochures, invitation cards and much more • Faster Foiling KIT for faster sleeking – up to 5 m/min. • Ultra-quiet compressor for pneumatic pressing • Console on castors for easy change of location • IVIVID Matrix ...
Control: FANUC Travel distance: X= 500, Y= 350 Z= 300 mm Max. table load: 350 kg Dimensions: 3500 x 2400 x 2400 mm Weight: 3,000 kg
DMG Mori Seiki LaserTec 50 FineCutting Sauer Laser Machine YOC 2010 Control: Siemens 840 D Power Specifications Max. travel X-axis 540 mm Max. travel Y-axis 500 mm Max. travel Z-axis 700 mm 5-axis laser precision machine for machining diamond tools up to Ø 355 mm and 420 mm in length • Linear actuators in X / Y with an acceleration > 1 g • Highly dynamic torque motors in both rotary axes (B and C axis) • Compact machine design with only 4m² floor space + Keller exhaust air extraction system
Spiral mixer Masz SM 120 Kneading machine with sophisticated and very robust technology! Digital LED Panel Control Dough machine with 2 timers Boiler lighting & emergency manual control for min/max. 6 - 120 kg dough Flour dust hood & temperature display Stainless steel boiler and spiral Machine mobile only with us DGUV V3 tested Connection 400V, 16A-CEE plug Dimensions: 775 x 1300 x 1360/1800mm, WxDxH Machine with warranty & spare parts service Option: Delivery Service Package Maintenance contract E-Box for more safety Instruction & Commissioning
The machine is in good technical condition, testing is possible after prior agreement. Machine on - 92331 h
MD-0105 Twin Screw Extruder - Brand: MAPRE - Type: E.2.6.100.22 - Diameter: 100 - Uses 22 L/D - With dispenser - 74 KW motor - Variable speed drive - Electrical panel - With hopper with forced feeder
Mazatrol Matrix Control Travel X-axis: 630 mm Y-axis: 765 mm Z-axis: 510 mm A-axis: +30°/-120° C-axis: 360° Max. distance from spindle nose to table top edge (table horizontal): 740 mm Min. distance between spindle nose and top of the table (table horizontally): 230 mm Max. distance from spindle nose to table center (vertical): 690 mm Min. distance from spindle nose to table center (vertical): 180 mm Max. table load: 500 kg Max. workpiece diameter: 730 mm Max. workpiece height: 500 mm Pallet Changer – Mazak Palletech System 6-fold pallet changer Pallet size: 500 x 500 mm Milling spindle SK-40 Max. spindle speed: 12,000 rpm Drive power milling spindle: 22Kw Tool magazine Number of tool positions: 120 Other equipment • 5-axis simultaneous machining • Synchronized tapping • Rapid traverse constant angle of inclination when moving 3D coordinate conversio ...
Manufacturer: Fu Chun Shin Machinery Model: SD 60004M Year of Manufacture: 2009/ 2015/2016 Type of Machine : Injection Molding Machine Heater Capacity: 46.68 kW Motor Power: 44 kW Pump Pressure:140 kg/cm² Find more here - / Contact us at -
Universal CNC lathe INDEX G 400 RATIO Line Hersteller [manufacturer]: INDEX Type [ type]: G 400 Control unit: Siemens C200-4D incl. milling of cylindrical tracks Incl. handwheel Baujahr[construction year]: 10/2004 Turning length 1250 Main spindle D102 with swing-in gear 1700 Nm Size 11 Hollow Clamping Cylinder 102 ARB-SPI ALIGNMENT. AND SWITCHING DEVICE TOOL CARRIER 1 COMPL. AXES X,Y,Z,B with turning/milling operation Disc turret VDI40 10 stations MILLING SPINDLE HSK A63 Tool carrier axles 2 XZ Disc turret VDI40 10 stations SUB-SPINDLE D102 DIRECT DRIVE 1300Nm Size 11 Hollow Clamping Cylinder 102 ARB-SPI ALIGNMENT. AND SWITCHING DEVICE DISC MAGAZINE ON THE LEFT OF THE HSK63 SINGLE-SWING GEARBOX WITH 32 TOOL HOLDERS DISC MAGAZINE RIGHT COMPL. M.32 TOOL HOLDERS HSK 63A Travel path: X= 320mm Z=1250mm Displacement measuring system X-axis glass mast. (abs) Fe ...
Planing machine / finishing machine Manufacturer: Marunaka Model: Royal FX Squeegee Blade Bottom Cutting width depending on the cutting angle max. approx. 250mm Workpiece height max. 180mm 2 machines mounted on trolleys.
Reference Num.: 4348 Brand: MAN Roland Type: PR 01 Construction year: 1990 Impressions: 9 mio Size: 480 x 660 mm Available: directly Status: Not in production Location: Deutschland Sheet size: min 210 x 280 mm, max 480 x 660 mm Printing speed: max 10,000 sheets/hour Printing units: 1 Machine size: Length: 1,720 mm, Width: 1,450 mm, Height: 1,605 mm Total weight: kg 2,190 / lbs 4,828 Power: KW 7 / hp 7
A two-component injection molding machine Krauss Maffei Multinject is available. Clamping force: 3500kN, platen dimensions X/Y: 1280mm/1190mm, second unit: 390CZ. Machine dimensions X/Y/Z: approx. 6300mm/2000mm/3100mm, weight: approx. 17000kg, control: Krauss Maffei MC4, operating hours: 78424h. The control is defective. Documentation vorhanden. An on-site inspection is possible.
Key data: 730 mm, 730 mm, 740 mm
CNC Horizontal Machining Center CNC control Mazatrol Matrix Nexus Pallet table size 500 x 500 mm Number of pallets 2 Table load 700 KG Travel X-Y-Z axes 730x 730x740 mm Table Indexing 0.001° Spindle taper CAT 40 Spindle speed 18,000 1/min Spindle motor 30/22 kW Mazgazin capacity 40 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
Axes: 5, travel X/Y/Z: 500mm/400mm/400mm, speed: 9000rpm, spindle power: 9kW/13kW, tool stations: 16, max. tool length: 290mm, max. tool weight: 6kg, max. table load: 200kg, feed rate: 10m/min, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 4500mm/4000mm/2500mm, weight: approx. 3400kg, control: Heidenhain MillPlus, operating hours: 34724h, spindle hours: 6490h. One operating button of the machine is defective, and the tool is sporadically not ejected. Documentation available. An on-site inspection is possible. This machine was used for training purposes.
Workpiece diameter: 500mm, workpiece height: 730mm, travel X/Y/Z: 630mm/765mm/600mm, A-axis: -120°/+30°, C-axis: +/-360°, max. table load: 500kg, spindle interface: HSK-A63, speed: 18000rpm, rapid traverse: 52m/min, feed rate: 52m/min, rotary table diameter: 610mm, tool positions: 30, control: Mazak Mazatrol Matrix. Documentation available. An on-site inspection is possible.
A start-hole drilling machine Madra-EDM is available. Clamping dimensions X/Y: 600mm/400mm, max. workpiece height: 300mm, travel X/Y: 500mm/400mm, travel W: 250mm, travel Z: 0.01mm-380mm, max. electrode length: 400mm, max. workpiece weight: 500kg, drilling diameter range: 0.3mm-3mm. Machine dimensions X/Y/Z: approx. 1300mm/1300mm/2000mm, weight: approx. 1000kg. The electronics of the machine are defective, as the current for the erosion process is not provided. Dokumentation vorhanden. An on-site inspection is possible.
Double Pallet Control Unit: Siemens 840D Travels :X: 560 mmY: 510 mmZ: 560 mm B: 360° Spindle speed: 18.000 rpm Table size: 400 mm x 400 mm Tool changer: 60 position Chip conveyor, Tool measurement Unit,High pressure coolant unit Can be inspected under power
Vertical machining center MAS MCV 1016 QUICK
Manufacturer: Krauss Maffei Model: 80-390-C2 Year of Manufacture: 2001 Type of Machine : Hydraulic Injection Molding Machine Tonnage (Clamping Force): 80 t Tie Bar Distance (H x V): 405 x 405 mm Platen Size: 610 x 610 mm Ejector Hole: Centre Knee Lever: No Minimum Mold Height: 250 mm Maximum Mold Height: Not applicable Opening Stroke: 750 mm Screw Diameter: 35 mm Shot Weight: 140 g Core Functions: 2 Handling System: No Electrical Data Operating Voltage: 400 V, 3-phase Frequency: 50 Hz Total Current (Iges): not specified Motor Current (In Motor): 97 A Heating Current (In Heating): 117 A Single Motor Current: 37 A Fuse Protection: - Motor: 100 A - Heating: 125 A Find more here - / Contact us at -
We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 3500t of clamping force and the relocation of industrial plants throughout Europe. Offered: Krauss Maffei 125-520 C2 injection moulding machine Machine Specifications General information Year of manufacture: 2004 Controls: MC4 Weight: 6000kg Dimensions (L × W × H): 4.5 × 1.5 × 2.2 m Clamping force: 125 t Tool Clamping System: 125 / ... Tool plate dimensions: 745 × 770 mm Ground clearance between columns: 470 × 470 mm Tool height: 300 mm Opening Distance: 600mm Maximum Plate Distance: 900mm Ejector force: 22 kN Ejector stroke: 150 mm Injection Unit: ... / 520 Screw diameter: 45 mm Injection volume: 275cc Injection weight: 250 g Specific Injection Pressure: 1878 bar ...
Originates from a prominent pharmaceutical production site in Europe and it is in excellent overall condition - well looked after and serviced on regular basis. Working Description: Automatic Push-O / Press-On 3-head capper suitable for plug caps (please see photos) with an output up to 90 caps per minute (depending on cap type and bottle being processed). Stainless steel fully guarded construction, lastly used with jars of 29.5mm DIA and with caps at 19mm DIA (12.5mm neck) + 16mm cap height + 11.6mm cap height. Stainless steel construction 720mm DIA rotary cap sorter with Perspex cover and lid. Comes with two additional sets of format parts including star wheel and guides. Suitable for Pharmaceutical, Cosmetics, Nutrition, Contract Manufacturing, Food, Medical Devices, Chemical and others. Technical Information: Size (machine): L: 3000m ...
GENERAL Project No.: 905808 Quantity: 1 pcs. Manufacturer: MATEC Type: 30-HV Control: Heidenhain iTNC 530 Year of Make: 2004 Condition: Used machine Approx (hrs): 54117 Program run approx. (hrs.): 14875 Approx. (hrs): 35997 DESCRIPTION MILL 4Axles Travel in X 2000 mm Travel in Y 600 mm Travel in Z 800 mm Tool holder SK 40 Max. speed milling spindle 12000 1/min Milling head automatically swivels 1 degree Chain tool magazine 48 stations Table size 2500x700 mm Interface 4th axis Clamping hydraulics OTHER EQUIPMENT Splash protection cladding with fully encapsulated working area Lighting in the work area Partition wall for pendulum machining Oil/Emulsion Mist Extraction System Hinge belt chip conveyor Internal coolant supply Coolant device with paper belt filter Machine condition light GENERAL TECHNICAL DATA Machine dimensions (LxWx ...
Offered is a milling machine from MAHO with Heidenhain TNC 121 control, table X/Y 1000mm/600mm, SK40 tool holder, 3526h. Operating manual is available. Inspection is possible by appointment.
Semi-automatic setting Commander with touchscreen Book measuring table Stand-alone pre-heating device : IR Infeed conveyor Star feeder Rounding and backing station Glue unit (Excluding gauzing station) Book mark suction device Head and tail banding station Casing-in station Case pre-stacking conveyor Case bending station Müller Martini VBF EP 680L : Semi-automatic setting, Pressing station, Left hand infeed Book Stacker, Müller Martini BLSD 650 D
maximum number of results exceeded
please refine your search
