136,840 used machines on RESALE, but how to find them? Machine Search
MAN Roland 202 T OB year 2000 2 colors size 52 x 74 cm 69 million impressions good condition
Used line for packing tablets into plastic tubes. Produced by Mark Maker Pharma Engineering. Manufacturer's documentation.
Key data: 660 mm, 1500 mm
X-axis 580 mm Y-axis 150 mm Z-axis 1,545 mm B-axis -30 to 210° W-axis 1,490 mm Main spindle Drive power 22 kW Max. spindle speed 4,600 rpm Max. bar passage 52 mm Sub-spindle Drive power 18.5 kW Max. spindle speed 5,000 rpm Milling spindle Drive power 18.5 kW Max. spindle speed 12,000 rpm B-axis 0.0001° Interface for bar feeder Parts catcher Chip conveyor 50 bar high pressure pump 5-axis simultaneous machining Full C-axis bending spindle Gear Hobbing, Abwalfräsem Milling spindle synchronized threading Cylinder interpolation Preparation for multiple and flash tool holders 1 pcs LNS Quick Load Servo 3 Short Bar Loader
Key data: 1740 mm, 760 mm, 660 mm
Mazatrol PC Fusion CNC 640 M Control 30-fold tool changer SK-40 Tool holder according to DIN 69871 Automatic tool length measurement Cooling by the spindle Chip Conveyor, Right Discharge Detachable handwheel Rapid traverses X/Y/Z: 36 m/min CE mark
Used complete line for the preparation, sorting, packaging, and storage of onions. Manufactured in 2013–2014. Manufacturers include WYMA, Allround, ZETA, EMVE, Newtec, JASA, IPLA, Tong Peal, Htech, and Jonge Jans. Processing scope: On-loading and feeding of onions, washing/polishing, drying, green top trimming, inspection, size sorting, buffering, weighing, packing in mesh bags/plastic film/cartons, palletizing, dust removal, and loading into storage chambers. Nominal line capacity: 10 t/h for the main processing line—limited by the ZETA ORC850-3 trimmer. In practice, 7.0–8.5 t/h at an OEE of 70–85%. Packaging: JASA J350QP: up to 40 packages/min according to a comparable offer. This corresponds to approx. 6 t/h at 2.5 kg or 12 t/h at 5 kg. Palletizer: up to 10 cartons/min, i.e., 6 t/h for 10 kg or 12 t/h for 20 kg. Energy: Installed power after adjustments: 18 ...
This DECKEL MAHO DMF 250 linear machining center from 2006 features a HEIDENHAIN iTNC530 controller and 4-axis capability with a B-axis tilting ±105°. The machine offers generous travels of 2,500 mm (X), 920 mm (Y), and 820 mm (Z), combined with a robust 3,100x900 mm table supporting up to 3,000 kg workpiece load. Equipped with an HSK-A63 spindle delivering 35 kW power and speeds from 20 to 18,000 rpm, it handles demanding milling and drilling operations efficiently. A 120-position tool magazine ensures flexible production. Rapid traverse rates reach 100 m/min on the X-axis. Available now through MBR Machinery—contact us for detailed specifications and viewing.
This used DECKEL MAHO DMC 60 U machining center, manufactured in 2002, is equipped with a Siemens SINUMERIK 840D (3D-Bahnsteuerung) controller. The machine offers 5-axis simultaneous machining with travels of 600 x 700 x 600 mm. It features a Schwenkfraeskopf (B-axis -7 / +180 degrees) and an NC-Rundtisch (C-axis 360 degrees). The spindle reaches 12,000 rpm with 28 kW power and 121 Nm torque. The setup includes an APC with 2 pallets (630 x 500 mm), a 60-position tool magazine with a horizontal double-arm changer, and IKZ Form AD (Innenkuehlmittelzufuhr).
This 2019 CMA Machine Tools 3RD CNC 4506 is a high-performance machining center featuring an OMRON industrial 15.4 touchscreen Controller. With 3 (X/Y/Z) controlled axes and 3 (X/Y/Z helical interpolation) simultaneous axes, it offers a generous X-axis travel of 4500 mm, Y-axis travel of 600 mm, and Z-axis travel of 450 mm. The BT40 (MAS 403 BT) spindle delivers up to 4000 rpm, 13.1 kW power, and 125 Nm torque. Equipped with a 10-position rotary tool magazine and 4 bar coolant through spindle, this machine is optimized for structural parts. With only 692 spindle working hours, this CE-compliant unit includes an emulsion coolant system, chip conveyor, and advanced programming capabilities for efficient production.
AGICOM recycling machine trade: Used eddy current separator Eddy Current from Goudsmit
Description Item # 9372 - ONE SHOT CHOCOLATE MOULDING LINE Manufactured by MAZZETTI RENATO (Italy) Model Micro FX425 OS Year 2013 Still all set up on the factory floor, in production until end October 2026 The line consists of: One-Shot depositing head capable of producing solid chocolate bars, including bars with 2–4 mm solid inclusions at a ratio of 7–8%, as well as pralines and cream-filled chocolate bars A solid-ingredient dosing unit equipped with a vibration system and vacuum feeding A vibration section A cooling tower A mould-twisting section for product demoulding A mould-return and heating system, followed by the restart of the depositing process. The line operates with 250 moulds measuring 405 × 205 mm. Available mould plates: Plain chocolate bars or chocolate bars with inclusions – 90 g; Plain chocolate bars or chocolate bars with inclusions – 25 g; One-Shot chocolate ...
x-travel: 1040 mm y-travel: 600 mm z-travel: 500 mm Control: Heidenhain iTNC 530 table surface area: 1250 x 600 mm table load: 600 kg tool taper: SK 40 spindle turning speed range: 1 - 8000 U/min max. torque on the spindle: (S1/S6) 140/200 Nm feed range: 40000 mm/min rapid power traverse in X-and Z direction: 70 m/min rapid motion - y-axis: 40 m/min spindle drive: (100/40 % ED) 13/19 kW total power requirement: 39 kVA weight of the machine ca.: 8,9 t dimensions of the machine ca.: m Operating hours 70294 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR ...
x-travel: 1660 mm y-travel: 510 mm z-travel: 510 mm Control: M+ Mazatrol Table dimensions: 2000x510 mm table load: max. 1.000 kg number of spindle speeds: 7.000 UpM tool taper: SK 40 tool piece magazine with: 48 Stück weight of the machine ca.: 7.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Good morning I have a used Mabex ultrafiltration system with a capacity of 18,000 liters/h for sale. If you are interested, please contact me. Paweł Zawadzki
Blade mill manufactured by MATEU & SOLE with a power of 3 hp Sieve length 250 Engine speed 1420 Maximum mill speed 700 rpm Transportation Information Length 850 mm Width 480 mm Height 1200 mm No documentation In your state
- 4 Doppelanleger 1551 (8 Stationen) - 1 Umschlaganleger 1528 - 1 Heftstation - 1 Dreischneider 1522 - 1 Späneförderband - 1 standard Bandauslage
Duplo DSC-10/20 + DBM-150 + DBM-150T Booklet Making Line - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Duplo DSC-10/20 + DBM-150 + DBM-150T Booklet Making Line Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Duplo DSC-10/20 + DBM-150 + DBM-150T Booklet Making Line Price: 11000 EUR Download PDF Duplo DSC-10/20 + DBM-150 + DBM-150T Booklet Making Line This machine is in very good condition and is the latest booklet making system from Duplo. Made in Japan, 2018. Controlled via a control panel. The line consists of: – DSC-10/20 collator – vacuum feeding – ...
IML DA 900 Rigid Box Automatic Wrapping Machine - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl IML DA 900 Rigid Box Automatic Wrapping Machine Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines IML DA 900 Rigid Box Automatic Wrapping Machine Price: 18750 EUR Download PDF IML DA 900 Rigid Box Automatic Wrapping Machine This machine is practically new. Year of manufacture: 2016. Application: Wrapping veneer on a box. Made in Italy. This automated machine is designed for forming solid board boxes by wrapping veneer on a solid board box. This is the latest version o ...
CMC Ariemat ARM 75 Automatic Cardboard Creasing Machine - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl CMC Ariemat ARM 75 Automatic Cardboard Creasing Machine Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines CMC Ariemat ARM 75 Automatic Cardboard Creasing Machine Price: 22000 EUR Download PDF CMC Ariemat ARM 75 Automatic Cardboard Creasing Machine The machine is fully operational and ready for production. Like new. This highly efficient creasing system is ideal for the production of binders, hard covers, and more. Made in Italy. Sheet feeding is manual, while ...
Wohlenberg 115 TS Paper Cutting Machine - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Wohlenberg 115 TS Paper Cutting Machine Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Wohlenberg 115 TS Paper Cutting Machine Price: 33000 EUR Download PDF Wohlenberg 115 TS Paper Cutting Machine Machine in very good condition, ready for production. Year of manufacture: 2008. Available immediately from stock. The guillotine can be used as a standalone unit or integrated with cutting systems. Program generation is menu-driven and includes a variety of cutting tasks, such a ...
Height=1.8 m, Overall length= 1.83 m, Overall width= 1.12 m, Net weight= 762 kg,
Baler, MACFAB, – used - : Price from location: 13.500.-€ (net)! Manufacturer: MACFAB Systems Ltd Type: BMF650 Auto HT RAL - MM9.8 Year of construction: 01/2020 Serial Number: MF J144 Weight: 1770 kg Operating hours: approx. 16h Automatic operation & "bale ready" display Horizontal door can be swivelled sideways Surface / Colour: RAL6018 Filling opening: 1,500x880x769mm (WxHxD) Abm. Press: 2,100x1,524x3,217mm (WxDxH) Former new price. 18.921.-€ Condition: The machine has only been used once for testing purposes. Available: immediately Location: 72336 Balingen
Key data: 25 t
Automatic straightener, shaft straightener , MAE -25RH, 1996, used Manufacturer: Maschinen- & Apparatebau Götzen GmbH, Germany Connected load: 14.5kva , Dim.: 2.5 x 1.5 x 1.8m, Weight : 5000kg
General SKU291Y828 MakeMaso TypeSP-2:: Mach.No.111 05 0205 Main Features MaterialStainless steel Volume1200 Ltr. Motor1.5 KW Specified Features - Eccentric Screw Pump Pumpcheck Number of pumps:1 Capacity600 - 1200 l/h With motor1,5 kW (220/415 V 1465/430 rpm) InletDN50 OutletDN50 Eccentric Screw Pumps MaterialStainless steel 1.4401 (316) General LocationBarneveld Floorspace0,9 x 0,21 m Total height0,3 m Weight100 kgPaints & coatingsStarchOther chemicalRubberAgrochemicalsPlastic & polymersFeed additivesEccentric Screw PumpsDetergent & surf.Food additivesLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicMasoIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersIndustries > Food & Feed > Feed ...
Number of sanding units: 2 st. sanding width: 180 mm Sanding height max.: 150 mm MAWEG Robert Hildebrand Saturn Duo Professional two-belt finish sanding machine with brushing unit Double-sided, sands from top and bottom Pneumatic belt oscillation Pneumatic belt tensioning Feed via top and bottom conveyor belts with spring-loaded hold-down rollers, infinitely variable speed (5–15 m/min) Workpiece thickness adjustment with pre-selectable stock removal amount at machine infeed, based on sensing the raw timber thickness Adjustment to wood thickness via motorized positioning of the machines upper section Digital thickness setting via mechanical counter with 0.1 mm display and zero-point adjustment Safety switch for oversized wood thickness at machine infeed Double-sided brushing unit with integrated workpiece blow-off Sanding belt blow-off (top and bottom) Belt breakage monitoring switch wi ...
x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 700 mm, 400 mm, 500 mm
Photon Energy Workstation XXL II CEPHEUS Mark12 – USP/picosecond laser system For sale is a well-maintained Photon Energy Workstation XXL II with CEPHEUS 1012 marker from ongoing operation. The system is particularly suitable for operators of existing Photon Energy / Hitachi systems, medical technology companies, laser marking service providers or companies with a need for UDI-compliant, permanent marking. Key data: Year of manufacture: February 2023 Runtime: approx. 4600 hours Laser: Nd-Vanadate, 1064 nm Laser power: over 12 W at 500 kHz Pulse duration: less than 15 hp Repetition rate: 20 to 500 kHz Cabin dimensions: approx. 1.46 m x 2.45 m x 2.38 m Weight: approx. 3.5 t Scan field: 160 mm x 160 mm Telecentric lens: F 163 mm, scan field 90 mm x 90 mm ZD30 axis of rotation available PHOTONmark, PUC / UDI Control, CamVisionPro and handheld scanner available Last ...
Tobacco cutting machine from the company Fly Mak, almost new (2023), hardly running. Adjustable to different cutting sizes from 0.02 mm to 20 mm. There is also a knife sharpening machine. Fpsbmkowdatlo Df Tuok Capacity: approx. 200 kg/hour
2003 2 Color + varnish 159 million 740 x 1040 mm Rolandmatic Tresu Automatic plate change In production Available: 10/26 Located: Germany
Key data: 900 mm, 500 mm
Angle table of Moho 700C milling machine. very good condition Clamping surface 900 x 500mm, with T-slots Also sell other spare parts of this Maho CNC milling machine, milling head SK40 with quill and clamping, control pult, control parts, drive motor, spindles, ... please inquire Angle table from EMCO milling machine, unused; L-600mm last photo ! Euro 480,-.
Key data: 1050 mm, 530 mm, 510 mm
Mazak VCN 530C CNC Vertical Machining Center CNC control: Mazatrol Smooth G Machine table: 1300 x 550 mm X-axis travel: 1050 mm Y-axis travel: 530 mm Travel Z-axis: 510 mm Spindle speed: 35 - 12,000 rpm Spindle: SK40 / DIN 67871A Spindle motor: 18.5/11 kW Positions in tool magazine: 30 and equipped, among other things, with - Chip conveyor, left - Cooling by the spindle 15 bar - Kitagawa NC Rotary Table MR 200 - Total spindle runtime 3,454 hours If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
Key data: 640 mm, 600 mm, 500 mm
CNC Vertical Machining Center DECKEL MAHO DMC 64 V linear With track control Heidenhain iTNC 530 Year of Make: 2004 Travel: X 640 Y 600 Z 500 Speed range: 0 – 12,000 rpm infinitely variable With the following accessories: Rigid angle table 850 mm x 600 mm clamping surface Vertical tool changer with 30 magazine positions 3D Probe Renishaw Electronic handwheel Full protection cabin with sliding doors and interior lighting Operating mode 3 + 4 IKZ 40 bar Chip conveyor Swarf Spray Gun Spiral chip auger Coolant Setup 3 Height Adjustable Machine Shoes Operating instructions
2005Siemens 840D Powerline ShopMillØ630 x 500 mm200 kg115° (-5°/+110°)500 mm450 mm400 mm20-10,000 rpm9 kW13 kW82 Nm0.010 mm0.01 mm24 m/min20 m/minChain magazine with double gripper, 30 positions SK40 (DIN 69871)80-130 mm (speed dependent)290 mm6 kg80 l17 kW4,860 x 4,350 x 2,424 mm2,210 x 2,120 x 2,150 mm4.05 t35,880 h9,609 h400 V / 50 HzDirect linear encoders (X/Y/Z)Heidenhain TS641 (infrared)
x-travel: 2500 mm y-travel: 920 mm z-travel: 820 mm Control: Heidenhain iTNC 530 table surface area: 3100 x 900 mm table load: 3,0 t tool taper: HSK-A63 spindle turning speed range: 20 - 18000 U/min rapid traverse: (X,Y,Z) 100 / 60 / 60 m/min main drive: (S1/S6) 35 / 25 kW total power requirement: 92 kVA weight of the machine ca.: 25,6 t dimensions of the machine ca.: 10,3 x 6,2 x 3,3 m Operating hours: 113520 h Total spindle hours: 58190 h (date: 3rd September 2026) In April 2026, a new milling spindle from DMG-MORI was installed. Since then only 25 running hours ! 4-axes controlled CNC control HEIDENHAIN iTNC 530 Autom. swivel-type milling head (B-axis) +/- 105 deg. 120-station ATC Chip conveyor Tool measuring device (laser) Electronic handwheel Control cabinet with air conditioning Machine will be sold without clamping devices, vise, and tools. The data for this ad was creat ...
Mazak Laser Cutting Model: SUPER TURBO X-48 HI-PRO SUPERCHARGED - CO2 Power : 2000 W Working range : 2500×1250 mm Year of construction : 1995 Available: from mid-December 2026 - Currently in use – Visible in use . All manuals available.
MAKTEK VM 400 CNC vertical machining center was built in 2015 in Poland by MAKTEK Jerzy Zalewski (currently CORMAK). The machine is suitable for both unit and series production, particularly for manufacturing components requiring high precision and repeatability. It enables precise milling, threading and drilling of workpieces using a reliable spindle. The spindle, driven by a high-power motor, reaches a maximum speed of 4000 rpm. It cooperates with an automatic, 10-position tool magazine, streamlining the subsequent machining operations. The rigid design of the MAKTEK VM 400 CNC milling machine ensures stable operation even during intensive use. The machine is equipped with a SIEMENS SINUMERIK 808D MILLING CNC controller with an intuitive interface. The VM400 CNC machining center weighs 1850 kg. Technical specifications of the MAKTEK VM 400 milling center - CNC controller: SIEMENS S ...
turning diameter: 510 mm turning length: 1000 mm control: MAZATROL T PLUS total power requirement: 22-26 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
S03-C Mason, 7,5KW, 380V, Pump : Rexroth 1PV2V3-30/40 RA01MC 63A1 , 1/80. Hydr. Block for 4 valves, 2 4/3 directional valves, elek. , tank approx. 170lt., dimensions; 95 x 60 x 80cm Possibly also with bending tool, bending cylinder! See photos. Other units on request! See photos!
Lead and tension spindle lathe Weiler Matador -Center width: 500 mm -Tip height: 140 mm -Feed range longitudinally over belt: 0.05–0.40 mm/rev -Feed range longitudinally via interchangeable gears: 0.018–0.800 mm/rev - Spindle head: size 5 -Drive: three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Wedge bar chuck Forkardt F 160 -Quick-change holder Multifix -4 lathe chisel holders -Drill chuck -Moving centering tip Dimensions: LxWxH 1.5x0.6x1.2 meters / Weight 600Kg
For sale is an original SWF / MAN GHH BL20 rope hoist from a dismantled and regularly maintained industrial crane system. Technical data: Manufacturer: SWF / MAN GHH Logistics GmbH Series: BL20 Type: BL2024.11.4 Factory No.: 169764 Year of construction hoist: 1990 Lifting capacity of the original crane system: 10,000 kg Engine Group: FEM 2m Motor power hoist: 8.0 kW Frequency-controlled lift drive original quadruple hook bottle available original wire rope available on the rope drum The hoist comes from a double-girder bracket crane, which was originally used at ABB Mannheim. At the time of dismantling, the operating hour meter of the original system showed only 1,419 operating hours for the 10 t hoist. Extensive original documentation of the crane system is available, including test book, technical data, factory documents and drawings. The ori ...
We are selling here a remaining stock of underfloor heating hose from our new halls. A total of 408 meters. Brand: Uponor Magna Pipe Plus, 20x2,0mm. On pallet. We will be happy to answer any further questions you may have. We have placed more ads under ETW. In the CHP area.
The Mac Ewans Centrifugal pump is a pump for use in sanitary applications. Previous used in a Casein plant. Motor: 7,5 kW - 400 V - 50 Hz - 1.465 rpm - 13,9 A. Diameter of the impellor: 180 mm. Connections on the inlet: 3. Connections on the outlet: 2,5. Estimated capacity: ± 30.000 ltr/h., macewans.co.nz/, Type of Machine: Centrifugal pump, Stock Number: 1455, Diameter of the impellor: 180 mm, Motor: 7,5 kW - 400 V - 50 Hz - 1.465 rpm - 13,9 A, Estimated capacity: ± 30 m3/h
The Mac Ewans Centrifugal pump is a pump for use in sanitary applications. Previous used in a Casein plant. Motor: 7,5 kW - 380/415 V - 50 Hz - 1.455 rpm - 14,6/13,4 A. Diameter of the impellor: 180 mm. Connections on the inlet: 3. Connections on the outlet: 2,5. Estimated capacity: ± 30.000 ltr/h., macewans.co.nz/, Type of Machine: Centrifugal pump, Stock Number: 1454, Diameter of the impellor: 180 mm, Motor: 7,5 kW - 380/415 V - 50 Hz - 1.455 rpm - 14,6/13,4 A, Estimated capacity: ± 30 m3/h
The Mac Ewans Centrifugal pump is a pump for use in sanitary applications. Previous used in a Casein plant. Motor: 7,5 kW - 380/415 V - 50 Hz - 1.455 rpm - 14,6/13,4 A. Diameter of the impellor: 180 mm. Connections on the inlet: 3. Connections on the outlet: 2,5. Estimated capacity: ± 30.000 ltr/h., macewans.co.nz/, Type of Machine: Centrifugal pump, Stock Number: 1456, Diameter of the impellor: 180 mm, Motor: 7,5 kW - 380/415 V - 50 Hz - 1.455 rpm - 14,6/13,4 A, Estimated capacity: ± 30 m3/h
The Mac Ewans Centrifugal pump is a pump for use in sanitary applications. Previous used in a Casein plant. Motor: 7,5 kW - 380/415 V - 50 Hz - 1.455 rpm - 14,6/13,4 A. Diameter of the impellor: 180 mm. Connections on the inlet: 3. Connections on the outlet: 2,5. Estimated capacity: ± 30.000 ltr/h., macewans.co.nz/, Type of Machine: Centrifugal pump, Stock Number: 1445, Diameter of the impellor: 180 mm, Motor: 7,5 kW - 380/415 V - 50 Hz - 1.455 rpm - 14,6/13,4 A, Estimated capacity: ± 30 m3/h
1994 2 Color Perfecting 2/0 1/1 No.: 24 295 B Max. 48 cm x 66 cm Min. 21 cm x 28 cm Speed 13,000 Rolandmatic In production Available: immediately Located: Germany
The machine is in good technical condition; testing is possible by prior arrangement. A probe is included.
The machine is in good technical condition; it can be tested by prior arrangement.
maximum number of results exceeded
please refine your search
