ma ga used for sale

This 3-axis DMG DECKEL MAHO DMC 63 V was manufactured in 2003. It features an X-axis travel of 630 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine is equipped with a Siemens 840D control unit and has a spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMC 63 V vertical machining centre we have for sale. Contact us for further details.

This 3-axis Mazak VTC 300C II was manufactured in 2012. It features a spindle speed of 12,000 RPM and a tool capacity of 30 tools in the automatic tool changer. The machine has a generous travel of 1740 mm in the X-axis, 760 mm in the Y-axis, and 660 mm in the Z-axis. If you are looking to get high-quality machining capabilities, consider the Mazak VTC 300C II vertical machining centre we have for sale. Contact us for further details.

FILLETING MACHINE BAADER 35 (SINGLE OR BUTTERFLY FILLET) FOR HERRING (20-40 CM), MACKEREL (24-40 CM), BLUE WITHING (22-40 CM) AND OTHER PELAGICS Technical description: Machine number: 10-1363-0035 Throughput rate: 100-200 pieces/min Voltage/Power: 380 V, 3 Ph, 50 Hz, 11 A Dimensions: 3950 x 2600 x 1550 mm Weight: 835 Kg The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482 or 484. A skinning machine BAADER 55 can be att ...

- Clipper Bread Bag Pouch Clip - Clipping machine - with turntable - with high-transport belt

Hydraulic injection moulding machine manufactured in 2013. This Krauss Maffei 35-180 CX features a plasticising size of 180 and a screw diameter of 28 mm. With 2 units available, this machine offers reliable performance for your production needs. If you are looking to get high-quality plastic processing capabilities, consider the Krauss Maffei 35-180 CX machine we have for sale. Contact us for further details.

Used bottling machine in plastic bags made by Mlecz-Masz, model PAC 50. New 2004.

MARTIN T90 Year of construction 1996 Nominal current: 64 A max. planing width: 260 mm max. planing height: 160 mm 5 spindles: 4x Tersa planer head + 1x universal spindle Spindle arrangement: Bottom – Right – Left – Top – Universal Spindle 1 – 4: 4 knife shaft – Tersa Use of profile knives for chamfers and radii possible (spindle R + L + O) Spindle 5: Universal 40 mm spindle (max. tool diameter: 220 mm) swivel (- 45° / + 90°) Bottom: 5.5 kW Left+Right: 5.5 kW Top: 5.5 kW Universal: 7.5 kW Feed speed: 4 – 25 m/min. (infinitely variable) electronic positioning control (storage of up to 100 pairs of dimensions possible) Engine brake Central lubrication Extras: Universal spindle Table extension at the spout Hold-down device for joining shaft right incl. 8 new rubber pull-out rollers Suction connection: 250 + 160 mm Dimensions: L: 524.5 cm W: ...

Automatic labeller for the application of self-adhesive vignettes and tamper evident seals. Balcony design. Capacity: up to 180 pcs/min. The machine is equipped with: - PLC SIEMENS, type S7-300. - HMI PC SIEMENS IPC 677 - Dopple REAJET printing system, type HRpro with camera control system - Preparation for Vision System LAETUS WT Commandor - Carton Transport Belt: pitch 250 mm - Various control systems for label presence with ejection etc.

Manufacturer | Manufacturer: Chemnitzer Maschinenbau GmbH Chemnitz Type | Type: CMB 16 Pinole Lift | Quill stroke: 120 mm Speed (infinitely variable) | speed (stepless): 460 - 1840 rpm ; 140 - 560 rpm Dimensions table | Table dimensions: 280 x 360 mm Adjustment range table | Adjustment travel table: 540 mm Recording | Holder: MK 2 Connected load | Connection Value: 0.8 kW Total weight | Total Weight: 350 kg

This 3-axis DECKEL MAHO DMC 103 V was manufactured in 2000. It features a travel range of 1000 mm in the X-axis, 600 mm in the Y-axis, and 600 mm in the Z-axis. The machine includes a vertical tool changer with 24 stations and a maximum permissible load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 103 V vertical machining centre we have for sale. Contact us for further details.

Processing Manafacture: Matsuura Type: H Plus 405 PC6 Year of construction: 2003 CNC control: Fanuc G-Tech 16i Travel: X/Y/Z: 600 x 600 x 600 mm Table size: 500 x 500 mm 6-fold pallet changer Tool magazine: 120-fold 4. Axis Knoll high-pressure system Internal cooling 70 bar

This 3-axis Matec HV30 was manufactured in 2004. It features an X-axis travel of 2,000 mm, Y-axis travel of 800 mm, and Z-axis travel of 800 mm. The machine is equipped with a Heidenhain TNC 426/430PB control and a maximum spindle speed of 15,000 rpm. If you are looking to get high-quality machining capabilities, consider the Matec HV30 universal machining centre we have for sale. Contact us for further details.

This 3-axis DMG DECKEL MAHO DMC 104V linear was manufactured in 2006. It features an X-axis travel of 1040 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine includes a robust table size of 1250 x 600 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMC 104V linear vertical machining centre we have for sale. Contact us for further details.

A Numalliance CNC wire bending machine for the production of 2D and 3D wire-formed parts is offered. Axes: 7, wire diameter range: 3mm-10mm, control: CNC. Weight: approx. 4100kg, dimensions X/Y/Z: approx. 7900mm/3700mm/2000mm. Documentation available. The machine has been shut down since 2025. An on-site inspection is possible.

boring unit with 23 spindles grid 32mm, motor 1,5kW boring unit tiltable 0? to 90? max stroke of the boring unit 80mm table 1000mm x 400mm pneumatic clamping of the workpiece fence left and right manually adaptable with foot pedal

Krauss Maffei PET Machine with Milk neck finish mold 27.5G 48cav 450-4500 CS PET 450Ton year 2010 Mold 27.5Grams 38mm Milk neck finish (requires attention) 48 cavities 25sec cycle Can be inspected

Inv. Num. : 6743 Type: MTF 1500 300 Producer: Maplan Created: 1998 Parameters: Clamping force: 300 t

Saw blade Ø: 300 mm Cutting range at 90° round: 100 mm Cutting area at 90° rectangle: 90 x 90 mm Mitre cutting area at 45° rectangle: approx. 40 x 120 mm Saw blade speed: 33/66 rpm Drive motor: 380 V, approx. 1.3 kW Space requirements: 850 x 600 x 1600 mm

This 3-axis DECKEL MAHO DMC 1035 V was manufactured in 2007. It features an X-axis travel of 1,035 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine is equipped with a tool changer that holds 20 positions and operates at a spindle speed of 20–8,000 rpm. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 1035 V vertical machining centre we have for sale. Contact us for further details.

A pipe shredder for wood chips is offered with a spare sieve, hole diameter on request Self-made, connection: 380 volts

Type: Die-sinking EDM machine Number: 21958 Category: Die-sinking EDM machines / EDM Manafacture: Makino Model: EDAF 3 Year of construction: 2016 Travel: 450 x 350 x 350 mm [ X x Y x Z ] Table size X: 700 mm Table size Y: 500 mm max. workpiece size X: 850 mm max. workpiece size Y: 650 mm max. workpiece size Z: 400 mm max. workpiece weight: 800 kg C-axis Linear scales (X,Y,Z) Control Hyper i Super Spark iV Super Surface Super Edge (incl. MF 4) Super Surface Graphite EROWA Robot Interface (A-Type)

Manufacturer: MAKA Model: DC 7 D Year of Manufacture: 2016 Type of Machine: Milling machine Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 10, Width 4, Height 3 (cm or m) - Weight 4000 kg - Voltage 480 Volts - Current 65 Amperes - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

x-travel: 350 mm y-travel: 240 mm z-travel: 340 mm turning speed range: 20 - 6.300 U/min feed speeds: 1 - 5.000 mm/min rapid traverse: 5 m/min tool taper: SK 40 power capacity: 6,3 / 10 kW control: Sinumeric 810 D tool change unit: pneumatisch manuell total power requirement: kW weight of the machine ca.: 1,6 t dimensions of the machine ca.: ca. 2 x 2 m 11065352834 5-sided universal milling machine Rotary table with swivel axis (clamping surface 400 x 290 mm) Rotation range C-axis displayed 360 ° on the screen B-axis swivel range +105 / -15 ° shown on the screen Table load capacity 100 kg, Operating modes 2 and 3, prepared for Net service, programming instructions included, RS 232 C interface Operating mode 4 (extended manual intervention) Accessories: coolant device, electronic handwheel Machine is workshop tested and with electrical Acceptance report The data for this ad was create ...

Manufacturer: MAKA Model: DC 7 D Year of Manufacture:2018 Type of Machine: Milling machine Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 10, Width 4, Height 3 (cm or m) - Weight 4000 kg - Voltage 480 Volts - Current 65 Amperes - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

This 4-axis Matsuura H. Plus 405 was manufactured in 2006. It features an X-axis travel of 600 mm, Y-axis travel of 660 mm, and Z-axis travel of 660 mm, along with a 360° rotary B-axis. The machine has a maximum workpiece size of 700 × 850 mm and a tool changer capacity of 60 tools. If you are looking to get high-quality machining capabilities, consider the Matsuura H. Plus 405 horizontal machining centre we have for sale. Contact us for further details.

• Description: Good properties for profile cuts • Stop: 2000 mm • Power: 400V 2.7 A • Dimensions: 3050 x 1550 x 2000 mm • Weight: 2800 kg • Operational since: 6.5.1992 • Accessories: 2000 mm stop

This 3-axis Matsuura Vplus 1000/40 was manufactured in 2005. It features a travel range of 1020 mm in the X-axis, 550 mm in the Y-axis, and 500 mm in the Z-axis. The machine includes a table size of 1150 x 550 mm and a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Matsuura Vplus 1000/40 vertical machining centre we have for sale. Contact us for further details.

This 4-axis Mazak HCN-5000 was manufactured in 2024. It features an X-axis travel of 730 mm, Y-axis travel of 730 mm, and Z-axis travel of 800 mm. The machine has a maximum workpiece weight of 700 kg and a spindle speed of 18,000 RPM. If you are looking to get high-quality machining capabilities, consider the Mazak HCN-5000 horizontal machining centre we have for sale. Contact us for further details.

Technical data (subject to change) Working width approx. 500 mm Chip depth as well as hollow and pointed joint indication Speed approx. 5,000 rpm Swivelling dressing stop Brake via foot pedal Weight approx. 950 kg

Hydraulic injection moulding machine manufactured in 2007. This Krauss Maffei 300-1400 CX features a clamping force of 3,000 kN and a tie bar distance of 630 × 630 mm. It includes a hydraulic clamping unit drive and an injection unit size of 300–1400. If you are looking to get high-quality moulding capabilities, consider the Krauss Maffei 300-1400 CX machine we have for sale. Contact us for further details.

x-travel: 530 mm y-travel: 600 mm z-travel: 300 mm 0: 7 bar Air consumption: 70-90 Nl/min. voltage: 120/230V+-5% kVA total power requirement: 1,5 kW weight of the machine ca.: 22 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type 1300-2S Working width 1300 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Total motor power 6.27 kW Transport dimensions 1700x2100x1400mm Weight 1200 kg Price 6100 Eur (EXW Jonava, Lithuania) Specifications Type 1300-2S Working width 1300 mm Min. Working length 400 mm Working thickness 5-140mm Grinding shaft speed – adjustable by frequency converter Feed speed 5-20 m/min The total power of the motors is 6.27 kW Dimensions for transportation 1700x2100x1400mm Weight 1200 kg Price 6100 Eur (EXW Jonava, Lithuania)

Type 1000-2S Working width 1000 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Total motor power 4,12 kW Transport dimensions 1700x1600x1400mm Weight 800 kg Price 4130 Eur (EXW Jonava, Lithuania) Specifications Type 1000-2S Working width 1000 mm Min. Working length 400 mm Working thickness 5-140mm Grinding shaft speed – adjustable by frequency converter Feed speed 5-20 m/min The total power of the engines is 4.12 kW Dimensions for transportation 1700x1600x1400mm Weight 800 kg Price 4130 Eur (EXW Jonava, Lithuania)

Recycling machine trade AGICOM- Pedergnana OG: Cable peeling machine MAXI 100 DEMONSTRATION UNIT The compact MAXI 100 cable peeling machine can be used to process cables with a diameter of 6 mm to max. 90 mm. Thanks to the tried-and-tested two-knife system, the cable insulation is cut open and the copper or aluminium core can be easily removed.

MAZAK Laser Cutting Machine STX3015 4kW TOP CONDITION – OVERHAULED IN 2023 Year of construction: 10/2015 very well preserved, overhauled MAZAK laser machine with 4000W Panel format: 3000mm x 1500mm minimum installation area of 2.9m x 7.3m Small parts conveyor belt LAN/USB connection automatic nozzle change automatic focus position adjustment Quick piercing into thick materials Plasma sensor for stainless steel cutting Piercing sensor for piercing Burning sensor for monitoring when cutting structural steel Completely encapsulated machine cover no foundation necessary FE: up to 22mm VA: up to 15mm ALMG: up to 10mm Plastic possible incl. software incl. warranty incl. suction incl. commissioning + training =optional with fully automatic loading and unloading=

cross-section width:: 40 (45) mm cross-section heigth:: 25 mm feed:: 1 - 999.999,9 mm speed of feed:: 1 - 60 m/min cuts max.:: 100 Schnitte/m Condition: used, Specification: circular knife cutting machine - second-hand for cutting rings, discs and profiles - diameter max.: 45 mm - 3 hoses or strands: 6 - 20 mm - 2 hoses or strands: 20 - 30 mm - 1 hose or string: 30 - 45 mm - cross section width max.: 40 mm - cross-section height max.: 25 mm - feed speed: 1 - 60 m/min, infinitely variable - Cutting capacity max.: 100 cuts/min depending on material and cutting length - Cutting length: 1 - 999.999,9 mm - Step jump: 0.1 mm - Feed by servo drive - Cutting by servo drive - Pulsed feed - Connected load approx.: 5 kW - Operating voltage: 3 x 400V, 50Hz, PE - Weight approx.: 550 kg - Dimensions (L/W/H): 1,940 x 890 x 175 ...

Mayr EAS overload clutch with sprocket 12 B1 Z 23 Bore ø 30 Height 64 No. 2/490.720.0SX0911968 160-400 Nm

Schrumpftunnel, Fabr. MAF, Type ST 55/018

This 3-axis Mazak VCN-410A was manufactured in 2003. It features an X-axis travel of 560 mm, Y-axis travel of 410 mm, and Z-axis travel of 510 mm. The machine is equipped with a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the Mazak VCN-410A vertical machining centre we have for sale. Contact us for further details.

UG 15 retro | KIRSCH+MAUSSER | 2019 - 00492 With a little melancholy, I offer our reliable KIRSCH+MAUSSER Roaster UG 15 for sale. The oven is since 2020 a loyal companion in our necado RÖSTMANUFAKTUR and has already produced many great coffees refined. What makes this roaster special: - Precise control of gas and exhaust air (1% steps) - Cooling screen with frequency converter (5% steps controllable) - Capacity: 15 KG per batch - Excellent condition - Documented chimney sweep measurements - About 18 tons of coffee roasted after 130 KG of curing The roaster is currently with us in Gütersloh/Isselhorst in operation and can be visited there. Feel free to show I can send you the stove personally or send you more pictures and videos. For ambitious coffee lovers: There is also the possibility of taking over the entire takeover of the roastery in Isselhorst. A fi ...

Bread slicer, Fabr. Berkel

Shrink tunnel, MAF, Type ST 55

This 5-axis DECKEL MAHO DMU 50 was manufactured in 2005. It features a digital swivel rotary table with a diameter of 630 mm and a maximum table load of 200 kg. The machine offers a rapid traverse of 24 m/min and a spindle speed range of 20 - 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 50 vertical machining centre we have for sale. Contact us for further details.

Machine : Rigid angle tables for milling machines Make : EMCO unused – slight traces of storage Clamping surface : 600x200mm, 4 T-slots 12mm, spacing 45mm Vertical: Hole spacing: 90mm/390mm, for T-slot 12mm Dimensions: Length : 60cm ; Width : 20 ; Height : 18cm; Weight: 44 kg PRICE : € 480,- Even larger MAHO or lids, ... Mounting plates: A - Length : 240mm ; Width : 120mm ; Height : 35; 3 T-slots 11mm spacing 45mm, (1x) PRICE : € 100,- B - Length : 420mm ; Width : 125mm ; Height : 46; 2 T-slots 11mm Distance 90mm (4x) PRICE : € 100,- C - Length : 520mm ; Width : 180mm ; Height : 56; 3 T-slots 12mm Distance 45mm (1x) PRICE : € 150,- D - Length : 600mm (660); Width : 180mm ; Height : 75; 2 T-slots 12mm Distance 90mm (3x) PRICE : € 180,-

x-travel: 2050 mm y-travel: 1100 mm z-travel: 800 mm Control: FANUC 18iM Super CAP II total power requirement: 22/26 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 6,25 x3,3 x 3,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MAJA ARTICLE NUMBER : 716-2690 PULL ROLLER FOR MAJA EVM3006 EF ,EVM 4006 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60

MAJA PART NUMBER : 515-0422 TRANSPORT SCRAPER ROLLER Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60

bore capacity in steel: 30 mm threading cutting capacity:: M20 throat: 260 mm bore stroke: 125 mm spindle taper: MK 3 feed range - spindle: 30 - 400 mm/U spindle turning speed range: 80 - 1440 / 180 -3200 U/min transmission ratio: 2 Stufen column diameter: 110 mm table surface area: 500 x 365 mm total power requirement: 0,8 / 1,4 kW weight of the machine ca.: 0,27 t dimensions of the machine ca.: 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE m ...

Manufacturer: Maka Model: MM7 Year of Manufacture: 2003 Operating hours: 55,103h Technical Details: - Table size: 2 tables with cube dimensions a: 1,500 x 1,500 x 650 mm - Spindle: HSD spindle - Tool holder: HSK63 - Tool stations: 10-station tool change Power consumption: - Compressed air: 6 bar - Nominal voltage: 400V; 50Hz - Control voltage: 24V Find more here - .ucymachines/ Contact us at - sales@ucymachines