ma ga used for sale

plate thickness: 2,5 mm roll diameter: 98 mm throat: 160 mm total power requirement: 1,5 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 550x1400x1500 m Delivered with: • manual version • 4 set of wheels • Foot control • Brake motor • Emergency stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 15 / 18 mm throat: 180 mm bore stroke: 80 mm turning speeds: 200 - 4000 U/min : 250 x 220 mm distance drilling head - clamping area: max. 380 mm total power requirement: 1,1 / 400 kW / Volt column diameter: 65 mm tool taper: MK 2 weight of the machine ca.: 0,08 t dimensions: 0,4 x 0,5 x 0,9 m Precise table drill: - high accuracy and quality - Drill table adjustable via rack and swiveling around the column - Full engine protection - Star grip - 230 volt mains connection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FILLETING MACHINE BAADER TYPE: 208 Technical description: Output conveyor width (x2): 108 mm Power supply: 400V / 50 Hz Power: 2,6 kW Dimensions: 3750 x 1050 x 1250 mm This machine processes small gutted and headed hake, small haddock, saithe, cod and whiting. The cuts of the spring-loaded circular knives being controlled by the fish itself, the BAADER 208 produces single fillets with skin of high quality and with best yield. The BAADER 208 is easy to maintain and to operate. All functional areas are very well accessible. The machine is of robust construction and consists mainly of stainless materials so that it has a long service life also when used at sea.

SALMON SLICER, CP FOOD MODEL: SILK CUT SLICER TYPE: SC 180 Technical description: Serial number: :7527 Power supply: 230/240 V, 1 Ph, 50/60 Hz, 7.5 A, 1.0 kW Inlet: Plastic wire belt, belt widht: (2x) 180 mm Outlet: Plastic belt, belt widht: (2x) 200 mm Plastic rollers, rolers widht: (2x) 200 mm Dimensions: 1800 x 1000 x 1550 mm The machine is designed for slicing smoked salmon, trout and Greenland halibut without bones or skin, and with a temperature of about ÷2 - +2° C. Its important that the fish has the correct temperature.

BREADING MACHINE, KOPPENS TYPE: PR 600 Technical description: Machine number: PR600-972 Power supply: 380-440 V/50-60 Hz Power: 1.7 kW Weight: 300 Kg Stainless steel mesh belt Belt widht: 600 mm Dimensions: 2200 x 800 x 1900 mm

Markforged Mark Two (2017) – FDM-Drucker mit Endlosfaser-Verstärkung Gebrauchter Markforged Mark Two aus 2017, Standort Fulda. Die Maschine arbeitet mit FDM-Technologie und ermöglicht das Drucken von Bauteilen mit kontinuierlicher Faserverstärkung (Carbonfaser, Glasfaser, Kevlar) – ideal für funktionale Prototypen und Kleinserien mit erhöhten mechanischen Anforderungen. Technische Eckdaten: Baujahr: 2017 Laufleistung: 4.015 Betriebsstunden, 556 Druckaufträge Zustand: gebraucht, gepflegt, funktionsfähig Ausstattung: Das System verarbeitet Onyx (Nylon mit Carbonfaser-Kurzfasern) sowie Standard-Kunststoffe und verstärkt diese wahlweise mit Endlosfasern. Dual-Extruder-Aufbau für Trägermaterial und Verstärkungsfasern. Lieferumfang: Markforged Mark Two Drucker Trockenbox zur fachgerechten Materiallagerung Restmaterialien optional verfügbar (Ablaufdatum überschritten) Die Masch ...

HEADING AND FILLETING MACHINE FOR SALMON AND MORE, CARNITECH TYPE: CT2620 + CT2630 Technical description: Heading machine CT2620 Power supply: (3x) 400 V, 50 Hz, 8 A Machine number: 08-0081 Year: 28/08/08 Dimensions: 4200 x 2100 x 1800 mm Filleting machine CT2630 Machine number: 08-0067 Year: 18/06/08 Power supply: (3x) 400 V, 50 HZ, 11 A Dimensions: 1800 x 850 x 2000 mm CT 2620 has been designed for head and tail cutting of salmon fish from 2 to 7 kg. The product is fed to the machine via a feeding chute, after which several operations are carried out on the fish, as the round attachment rotates one quarter of a revolution for each push on the button on the operation panel, see section 3.0 for further details. During initial operation, the occiput is sawed through with a round knife, where upon a guillotine knife tilts down to cut off the head, which then lands in the waste carrier  ...

FILLETING MACHINE, BAADER 36 Technical description: Power supply: 400 V/50Hz Dimensions: 3500 X 1000 X 1700 mm - 2300 X 1000 X 1100 mm Can be combined with Automatic feeder BAADER 488 The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483 or 484. A skinning machine BAADER 55 can be attached for the production of skinless herring fillets.

FILLETING MACHINE FOR SARDINE, HERRING, BLUE WHITING, BAADER TYPE: 134 Technical description: Power supply: 380 V, 50 Hz, 12,0 A, 2 kW, 3 Ph Dimensions: 3000 x 2100 x 1200 mm Weight: 450 Kg Can be combined with Automatic feeder for sardine and herring, Baader type: 478 This machine is especially designed for the filleting of small herring and pilchard with an overall lentgh of 15-25 cm (25-125 g), the convenient infeeding procedure and the steplessly adjustable operating speed permit high throughput. Excelent yield is guaranteed by a meat-saving selfadjusting headcut, adjustable tailcut and reliable passage through the filleting tools leading to smoothly cut block-fillets, single fillets without dorsal fins as well as belly cut herring with or without tail fins. Combined with the automatic feeder BAADER 478, the machine becomes an automatic filleting unit operated by only one person fo ...

FILLETING MACHINE BAADER 35 WITH NOBBING SYSTEM (SINGLE OR BUTTERFLY FILLET) FOR HERRING (20-40 CM), MACKEREL (24-40 CM), BLUE WHITING (22-40 CM) AND OTHER PELAGICS Technical description: Serail number: 10-1363-0035 Year: 1992 Throughput: 100-200 pieces/min Dimensiones: 3300 x 1250 x 1800 mm The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483, 484 or 488. A skinning machine BAADER 55 can be attached for the produc ...

PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-2C Technical features: Output: up to 50 cans/minute Recommended output: 20 to 50 cans/minute (according the can type) Format: diameter 150 mm Cans height: max. 120 mm

PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-110 Technical features: Output: up to 100 cans/minute Recommended output: 40 to 80 cans/minute (according the can type) Formats: 1 unit with format diameter 73mm (ID 2015) 1 unit with format diameter 99mm Others formats: diameter 65mm, 1/2 oval, 1/4 oval Cans height: 25-62mm

max. grinding diameter: 200 mm centre height: 100 mm centre distance: 525 mm weight of the machine ca.: 700 kg dimensions of the machine ca.: 120x100x150 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. grinding diameter: 200 mm grinding length: 525 mm centre height: 102 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. width of grinding wheel: 100 mm diameter / bore of grinding wheel: x mm Flange taper: x The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lunch Box, Hamburger Box. Food Box Gluing Machine The machine was only adjusted and tested Can be demonstrated on site

x-travel: 290 mm y-travel: 170 mm z-travel: 310 mm table surface area: 600 x 210 mm spindle taper: SK 40 spindle turning speed range: 50 - 2600 U/min feeds: 9 - 450 mm/min quill stroke: 70 mm total power requirement: 5,5 kW weight of the machine ca.: 720 kg - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 410 mm, 220 mm

Dressing and thickness planing machine TOP Master FS 410 Function tested Working width: 410 mm Max. planing thickness: 220 mm 4-knife shaft Dressing table length: 2000 mm 2 feed speeds Feed and Pull Roller: Steel Table rollers Tiltable stop Very good condition Weight approx. 900 kg

Max. size= 65 x 52 cm, Availability= 062025, 4 fold pockets automatic folding pocket adjustment Flexible knife folding unit Gremser flat pile feedersheet movement monitoring double sheet control Up to 30 folding jobs can be saved shingle delivery Format: max: 520x650mm min: 100 x 120 mm, smallest fold length 35 mm LOT Loaded in truck or container

Control Siemens Sinumerik 840D Travel X/Y/Z: 560 x 560 x 510 mm Spindle speed 15,000 min-1 2-fold pallet changer 400 x 400 mm Tool magazine for 40 Wkz., SK 40 Paper filter Conveyor

Manufacturer: CIMEC Model: Labeling Machine Year of Manufacturing : 2013 Power: 1.5 kW Voltage: 400V Phase: 3 Phase + Neutral + PE (Protective Earth) Frequency: 50 Hz CE Marked: Yes Additional Information: The machine comes with parts compatible with the following bottle formats: - 33cl Long Neck - 50cl Long Neck - 27.5cl Long Neck Find more here - .ucymachines/ Contact us at - sales@ucymachines

(showroom machine) Main Technical Data Number of Spindles: 4 spindles Gundrilling Diameter Range: 4 - 20mm Working Method of Tool: Rotating Working Method of workpiece: Rotating Clamping Method: Clamping Cone Max. Drilling Depth: 800mm Workpiece Max.Outer Diameter: 300mm Drilling Feedrate: 1-180mm/min Spindle Center Height: 220mm Spindle Distance: 158.75mm Control System: SIEMENS 828Dsl A.C. Spindle Motor Power: 2×15 kW Spindle Speed (Infinitely Variable): Max.5000 RPM Tailstock Spindle Speed: 70rpm Rapid Traverse Speed: 6000mm/min High Pressure Pump Motor Power: 4×7.5 kW Coolant Flow Rate: 4×46 L/min Filter accuracy: 20µm Max.Coolant Pressure: 100 bar Oil Tank: 1200L Weight of Machine: 10000 Kg. Electrical Supply:  ...

Gewinde-Ø: 52 mm threading length: 500 mm thread pitch: entsprechend Hohlspindel -Ø: 54 mm spindle turning speed range: 25 - 140 U/min turning speeds:: 6 Stufen voltage: 380 V / 50 Hz main drive motor: 3 kW total power requirement: 4,5 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 1,0 x 1,8 x 1,4 m • with pneumatic workpiece clamping, • threading head Z 52, • cooling device, • 2 sets of chaser holder,size: Z52/2B, + 21B • 5 sets of chaser jaws,pitch 1 - 2,5 mm Machine is in a good condition. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mazatrol Matrix Control Travel: X-axis: 560 mm Y-axis: 640 mm Z-axis: 640 mm 2 pallets 400 x 400 mm Milling spindle with increased torque Spindle motor 30 kW Max. spindle speed 18,000 rpm NC rotary table, 360,000 positions Tool changer with 80 stations SK-40 Tool Holder Tool length measurement Preparation of the Renishaw Infrared Measuring System, OMP60 Conveyor 15 bar high pressure pump CE mark

The machine is in good technical condition, a test run is possible by prior arrangement. Accessories included.

Turret milling machine DYNAMILL B-4V - capacity 900x380x600 mm, Digital read-out system, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 1270x254 mm, Longitudinal travel x axis: 900 mm, Cross travel y axis: 380 mm, Vertical travel z axis: 406 mm, Spindle taper: 40 ISO, Spindle speed: 40- 3800 rpm, Number of spindle speeds: Stepless, Spindle motor power: 3,7 Kw, Quill spindle travel: 127mm, Number of working feeds: stepless by DC motor, Weight: 2.000 Kg, Accessories: DRO, coolant.

Ø min/max to be rectified: 3 - 300 mm, Dimensions of the work wheel: Ø610xØ304.8x508 mm, Dimensions of the drive wheel: Ø355xØ152.4x508 mm, Weight: 17000 kg, Power: 100 kW

Pasta machine WLS, Type Pressquick PQ 6-SU, Capacity approx. 50 kg/h, Capacity of the trough 12 kg, 2.2 kW press cylinder with continuous water cooling., DIOSNA S 120 2G dough kneading machine (has since been sold!), 100 drying baskets, JUWEL TS 120 drying cabinet, for pasta 200 - 400 kg in 12-36 hours, 8 drying programs, System was not in operation, Year of manufacture 2021

Grinding wheel dimensions: Ø300 x Ø50 x 127 mm, Height to be rectified: 400 mm, Surface to be rectified: 1050 x 300 mm, Grinding head motor power: 5 CV, Total power: 8 CV, Weight approx.: 3700 Kg, Dimensions: 3050 x 1600 x 2350 mm

Marel concept 500 labelling machine, - top and bottom labelling machine

grinding length: 600 mm grinding width: 300 mm magnetic clamping plate: 600x250 mm wheel diameter: 220-300 mm weight: 2200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 630 mm y-travel: 800 mm z-travel: 750 mm control: SIN 840D sl Siemens B - axis: 360 x 0,001 ° A - axis: -200 -- +25 x 0,001 ° spindle turning speed - stepless: 20 - 18.000 U/min power capacity at 100 % load: 28,00 kW power capacity at 40 % load: 34,00 KW max. torque at 40% / 100% load: 110 / 84 Nm tool taper: HSK 63 feed X/Y/Z/-axis: 1 - 100.000 mm/min rapid traverse X/Y/Z: 100,00 m/min feed capacity X/Y/Z: 9 / 6 / 9 kN feed B-axis: 1 - 14.400 °/min feed A-axis: 1 - 7.200 °/min size of pallet: 2x 500 x 500 mm workpiece weight max.: 400 kg max. workpiece diameter: 800 mm workpiece height max.: 800 mm tool magacine with: 63 diameter of tools max.: 280 mm tool length - max.: 550 mm weight of tools max.: 15,00 kg total power requirement: 65,00 kW weight of the machine ca.: 14,00 t dimensions of the machine ca.: 5,50 x 3,50 x H3,20 m 5-axis machining center with SIEMENS SINUMERI ...

Skinner Maja -Type: BXM 554 -Power: 1.1 kW -External dimensions: 1900 x 1150 x 1230 mm -Cutting width: 554 mm -Belt width: 500 mm -Power supply: 400V 50Hz 3N -Weight: 370 kg -Quantity in stock: 1 -Condition: used in good condition

Mazak NTX 48 Turbo CO 2 Laser cheap MAZAK laser cutting machine NTX48 1.5kW Year of Make: 1998 well-preserved, overhauled MAZAK laser machine with 1500W Panel size: 2500mm x 1250mm Minimum installation area of 2.6m x 6m Completely encapsulated machine cover FE: up to 15mm VA: up to 6mm Plastic possible Wood possible incl. software incl. suction Machine was completely overhauled by Mazak 1,000 hours ago (lenses, mirrors, oils). Includes Acer Laptap with software Si Cam including dongle Video on request To be visited under power

Manufacturer: Bacci Model: MASTER/CUT Year of Manufacture: 2012 Voltage (Volts): 380 V Frequency (Hz): 50 Hz Power (Kw): 24 kW Weight (Kg): 6000 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: MITSUBISHI Model: Laser Cutting Machine Year of Manufacture: 2017 3000×1500 mm Power: 2.7kw Technology: Co2 2 changing tables AVAILABLE: immediately Find more here - .ucymachines/ Contact us at - sales@ucymachines

PET Blow Moulding Machine - MAG PLASTIC The ideal blowing solution for PET bottles Year : 1994 Type : SSB 40 Input voltage : three-phase 400 V Frequency : 50 or 60 Hz ± 5% Total installed power : 86 kW (Option 102 kW) Weight: Approximately 5000 kg Number of molds: 4 Clamping force : 250 KN Total opening stroke : 120 mm

Manufacturer: Kuhlmeyer Model: Double Sandbelt Machine Year of Manufacture: 2019 Condition: Fully Operational Technical Specifications Overall dimensions (L × W × H): approx. 4400 × 2400 × 2450 mm Weight: approx. 2000 kg Connected load: 6 kW Main power protection: 20 A Rated voltage: 400 V, 50 Hz, 3P/PE Control voltage: 24 V DC Protection standard: EN 60204 Compressed air pressure (pneumatics): 6.0 bar Compressed air consumption: 0.1 Nm³/h Dust extraction capacity: 3391 m³/h Air speed: 30 m/s Effective working width: 2700 mm Sanding belt size: 100 × 8340 mm Maximum workpiece weight on machine: max. 50 kg (depending on size, number of vacuum clamps, and machining position) Maximum workpiece weight on infeed table: max. 100 kg (flat position) Mounting drawing number: ENG-026696 --------------------------------------------------------------- Environmental Condi ...

Manufacturer: Joysonquin Ningbo Model: Tesla Model Y Clip Machine Year of Manufacture: 2023 Type of Machine : Electrical Specifications: - Voltage: 3x400V AC / N / PE - Frequency: 50Hz - Power: 15 kVA - FLC (Full Load Current): 40A Air Requirements: - Pressure: 6 bar - Consumption: 800 L/min Weight: 2500 kg Remarks: Machine equipped with two KUKA robots: KR 10 R1100-2, One partially disassembled for spare parts Find more here - .ucymachines/ Contact us at - sales@ucymachines

3M-Matic 800a-E Type 29600 (5799) Carton sealing machine for lid and bottom closure with adhesive tape, side belt belt drive system, carton format range in mm length 150 - ~, width 115 – 550, height 120 – 625, manual carton size adjustment, maximum carton weight approx. 38 kg, roll discharge with a length of approx. 1200 mm, drive laterally, electrical connection 380V/50Hz/3PH/1.4A, 260W, machine in mobile version on rollers, output up to 40 cartons per minute

Perfect binding line - Back Gluing Machine for Hard Cover Fully rebuilt in 2011 Equipped with : 1 x Wohlenberg Master 7000 – 19 clamps binder Cover feeder Gauzing station Cold glue & PUR gluing unit 2 x Nipping stations Conveyor system 1 x Wohlenberg Sprinter 7010 - 20 stations gatherer Criss/Cross delivery Optigraf sheet control system 1 x Wohlenberg Trim-tec 60i trimmer (2006) 1 x Stacker

SUB: FOR SALE... CHRIS MARINE VALF SPINDLE GRINDING MACHINE AT TURKEY HAVE A GDY SIR WE VE 1 PC USED CHRIS MARINE VALF SPINDLE GRINDING MACHINE AT TURKEY TYPE BSP-2 NO. 463/204 DATA 3X 440V 60HZ IT WAS USED VERY LESS HOURS IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurlubay Regards; Aliaga marine services E-mail: infoaliagamarine.com PHN/fax: + 90 232 618 03 88 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

Key data: 3000 kN, 900 g/PS, 60 mm

Injection molding machine Krauss Maffei Km 300 1400 C1 BJ 1998

Injection moulding machine Krauss Maffei KM 125-390 C2 BJ 2004

Measuring and marking plate cast steel-grey cast iron heavily ribbed STIEFELMAYERfrom a measuring or marking machine with hand-held measuring armMasch. No. 8530979 Year of construction approx. 1989Length 3000 mmWidth 1500 mmThickness 360 mmWorking height 690 mmPanel thickness 70 mm continuous - laterally worked at a 90 angle area 3000 x 360 mm- 6 pieces height-adjustable feet - plus 1 piece measuring arm mechanical and electrical without function the measuring range is approx. X = 2350 mm, Y = 1250 mm, Z = 1300 mmSpace requirement L x W x H 3000 x 2000 x 2500

CNC Control, Numeric Control, from MAX MÜLLER GILDEMEISTER MD 5S Type Eltropilot MByear of construction approx. 1980Rack with 20 module locations - 12 built-in modulesBuilt-in modules:1 Piece 0.651.406-19.3 UNI 030655-1017 Universal Interface1 Piece 0.650.847-56.1 O32 Output Card2 Piece 0.651.708-57.3 I32 032937-1017 Input Card1 Piece 0.652.138-36.1 APC1 Piece 0.651.928-25.3 LAB Position Control1 Piece 0.651.400-22.31 Piece 0.860.204-59.1 B321 Piece 0.652.128-35.0 RE41 Piece 0.651.269-26.0 ITY 030645-1017 Serial

Measuring machine with hand-held measuring arm STIEFELMAYERhigh-precision measuring and marking plate cast steel-grey cast iron strongly ribbedMasch. No. 22890285 year of construction 1985Length 2500 mmWidth 1500 mmThickness 350 mmPanel thickness (top) 50 mm Solid material with 300 mm ribsWorking height approx. 800 mm- manually movable with measuring arm, measuring range X=1970 mm, Y = 815 mm, Z = 840 mm- with 3-axis digital display Grundig MZ 1030- 5 pieces height-adjustable feetSpace requirement L x W x H 2500 x 1500 x 2500 mmWeight 3000 kgvery good surface;

Measuring machine with hand-held measuring arm STIEFELMAYERMess and marking plates cast steel-grey cast iron strongly ribbedHigh-precision measuring plate with good surfaceYear of construction 1985Length 2000 mmWidth 1500 mmThickness 350 mmPanel thickness (top) 50 mm Solid material with 300 mm ribsWorking height approx. 800 mm- manually movable with measuring arm, measuring range X=1490 mm, Y = 1000 mm, Z = 1250 mm- with 3-axis digital display Grundig MZ 1030- machined side surface at 90 angles to the table surface, 2000 x 350 mm - 5 pieces of height-adjustable feetSpace required

a KM-200-1000 machine with removal robot built in 2006 for sale. The machine is in neat condition and serviced by Krauss Maffei.