130,509 used machines on RESALE, but how to find them? Machine Search
Fischer Imaging Mammotest Plus S with: Mammotome SCM 23 (biopsy) Tube Varian M-147 SP 0.1/0.3 complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patien ...
COURSE AXIS X: 840 MM COURSE ASSE Y: 860 MM COURSE ASSE Z: 840 MM TAVOLA SIZE: 630 X 630 MM TABLE RANGE: 1,200 KG TABLE INDEX: 1ST MANDRINO POWER: 30/25 KW ROTATION SPEED: 12,000 GIRI/MIN ATTACK: BT 50 NASOMANDRINO/PALLET: 50-810 MM MANDRINO - TAVOLA: 150-990 MM TOOL WAREHOUSE: 120 STATIONS MAXIMUM HEIGHT OF THE PIECE: 1000 MM CONTROL: MSG-502 BUILT: 2002
COURSE AXIS X: 840 MM COURSE ASSE Y: 860 MM COURSE ASSE Z: 840 MM TAVOLA SIZE: 630 X 630 MM TABLE RANGE: 1,200 KG TABLE INDEX: 1ST MANDRINO POWER: 30/25 KW ROTATION SPEED: 12,000 GIRI/MIN ATTACK: BT 50 NASOMANDRINO/PALLET: 50-810 MM MANDRINO - TAVOLA: 150-990 MM TOOL WAREHOUSE: 120 STATIONS MAXIMUM HEIGHT OF THE PIECE: 1000 MM CONTROL: MSG-502 BUILT: 2002
Complete grain mill for sale for about 75 tons per day. Rollermills Bühler MDDK Plansifter MIAG LM The plant has been professionally dismantled. All machines have been overhauled. With switchgear and PLC control.
Machine type MIG/MAG inverter welding system Make Merkle Type MobiMIG 320 K Plant No. 118.362 Connection voltage 3 x 400 volts Setting range 25 - 320 amperes Switch-on time 40% ED at 300 amperes 60% ED at 270 amperes 100% ED at 240 amperes Current setting infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Design portable assembly system Wire feed gearbox 4-wheel gearbox DV 26 Hedging 16 Ampere Dimensions L x W x H 600 x 300 x 565 mm Weight 32 kg Age 6 months Condition workshop-tested new incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 pie ...
ILLIG RDM 70K PP/ PS Cup Mold, manufactured by Marbach, 77 mm cut dia., 14-Cavity Inclusive of stacker Parts
METRIS-NIKON MCA II 5124 measuring machine built in 2011 is a versatile device that can be used for measuring both small-sized objects as well as complex, large-sized parts. In addition, thanks to the computerisation of measurement procedures and its compact design, the machine can be used directly in the production environment or even inside the measured objects. The measurement process starts with an angular displacement of the arms to ‘pass’ through reference points. The operator then brings the machine’s measuring tip to the surface of the measured workpiece and validates the coordinates using a button located on the head. The coordinates are then transformed by the calculation procedures to the cartesian system (X,Y,Z), where they are used as the basis for determining the dimensions by approximation of the measured features and geometric figures, i.e. circles, cylinders and ...
Type MM2617 Sand Pad Size 3120170mm Sanding belt line speed 18m/s Working table angle 45 ? Working table size 1200240mm2 Motor 4 kW
UNWORK CENTRE TO 54 MANMOTOR POSTS BOB - 560 ROTANTE COLLECTION FOR BOBINE - 1600 MM BANCAL OF DISTRIBUTION WITH 3 TESTES TO LEGARE
Type MX5117B Work table dimensions 1130x670 mm Spindle speed diameter 35 mm Spindle rotation speed 6000-8000-800-10000 rpm Max. working thickness 120 mm Motor power 4 kW Dust exhaust outlets 200x65, 200x80 mm Transport dimensions 1130x670x1100mm Weight 325 kg
7 x Meva MD stacking frame with wheels is used for storing and transporting construction supports, wooden beams, etc. 155kg 7 x Meva MD Stacking rack with wheels Is used to store and transport props, wooden girders, etc. 155 kg
Tip width/grinding length: 1000/1075 mm Gr. Grinding diameter: 250 mm Table swivel: +/- 8° Gr. Table longitudinal movement: 1210 mm Workpiece spindle stick swivel: 0 - 90° Spindle bore/cone: 38 mm/MK 5 Grinding spindle stick easily swivelling Hydr. Quick adjustment approx.: 50 mm Grinding wheel dimensions: 400 x 50 x 127 mm 2 grinding wheel speeds due to V-belt step disc Drive power: 3 kW Space requirement: 2900 x 2200 x 1750 mm Weight: approx. 3.5 t
Permanent Overbelt Magnetic Separator TYPE DMPM800 1.600 x 900 x 220mm = Solid steel construction, welded Welded & painted construction RAL 7016 (anthracite grey) Magnet dimensions: 800x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm spherical overtightened, shaft fixed with tension bearings. Drive: Slip-on geared motor GEMOTEG 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5,4mm thick Conveyor belt width: 700mm 7 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply particularly transversely stable Equipped with stainless alligator connectors RS125 Magnet Features: Built-in magnetic core: Strontium Ferrite Y30 Bonded SfRe strontium hard ferrite mag ...
Controlled turret punching machine, used controlled turettpunching machine, used Fabr.: EDEL Model: MICROMAT 207 HS Control/ control: LOGO 2000 (with workpiece graphics / with workpiece graphics) Built / year: 1997 Force/punching force: 20 t Maximum sheet thickness/ max. thickness: 0.5 ... 5 mm Travel in X-axis/ travel in X : 1250 mm (expandable to / enlargeable to 2000 mm) Travel in Y-axis / travel in Y axis: 750 mm (expandable to / enlargeable to1000 mm) Punching speed / number of strokes: 20 per min Stroke stroke infinitely adjustable up to / stroke: 40 mm Punching example for steel punching 100 mm 1.5 mm ( punch diam. and thickn.) 50 mm 3.5 mm 16 mm 12.0 mm Machine weight/ weight 5 t Connection value / load: 14 kW
Drill diameter: 2 - 13 mm Tip angle: 90° - 140° Speed: 4800 rpm Connection: 230 V Engine power: 0.18 kW Weight, approx.: 11 kg Dimensions, approx.: 320 x 180 x 190 cm Characteristics: - Ideal for grinding HSS/hard metal spiral drills - Safe operation due to forced grinding - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including sharpening device to reduce feed force - Device for back grinding of the drill cuttings to reduce the friction between the drill and the workpiece - Rotor with precision ball bearings Delivery: - Grinding wheel CBN - 11 collet pliers ER 20, 3 - 13 mm - collet holder ER 20
Drill diameter: 13 - 32 mm Tip angle: 90° - 140° Speed: 4800 rpm Connection: 230 V Engine power: 0.25 kW Weight, approx.: 28 kg Dimensions, approx.: 490 x 250 x 260 mm Characteristics: - Ideal for grinding HSS/hard metal spiral drills - Safe operation due to forced grinding - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including sharpening device to reduce feed force - Device for back grinding of the drill cuttings to reduce the friction between the drill and the workpiece - Rotor with precision ball bearings Delivery: - Grinding wheel CBN - 20 collet pliers ER 40, 13 - 32 mm - collet holder ER 40 Optional extension, at extra cost: - collet set 5pcs. 8.0 / 9.0 / 10.0 /11.0 /12.0 mm
Milling machine 4-axis (15995740874) DMG Milltap 700 (2015) Spindle 24,000 1/min NC parts apparatus Lehmann EA-510. L Tool magazine 25 places Renishaw Measurement Kit Rinsing gun Milling machine 5-axis (15995747284) DMG Milltap 700 (2015) Spindle 24,000 1/min Swivel rotary tables 5-axis simultaneous operation Clamping pneumatics 1-circuit Tool magazine 25 places 40 bar IKZ Conveyor Rinsing gun Renishaw Measurement Kit Milling machine 5-axis (15995765944) DMG Milltap 700 (2018) Spindle 10,000 1/min Swivel rotary tables 5-axis simultaneous operation Clamping pneumatics 1-circuit Tool magazine 25 places 40 bar IKZ Conveyor Renishaw Measurement Kit Automatic front door Automation interface including automation door on the right Milling machine 5-axis (15995734744) + WH3 (770200062R) DMG Milltap 700 (2014) Spindle 10,000 1/min Swivel rotary ...
MARINE GENERATOR SET Mitsubishi STAMFORD ALTERNATOR 295 KVA / 1500 RPM
2 PCS - ZF MARINE GEARBOX IRM 350 1.653:1
Figure shows precision flat grinding machine: FSM 2550 AH Table size: 300 x 600 mm Installation height: 500 mm Max table load: 300 kg Engine power: 4.6 kW Connection: 400 V Dimensions: 2300 x 1790 x 2200 mm Weight, approx.: 2000 kg Equipment and scope of delivery: - All castings, such as machine stand, table, etc. made of MEEHANITE® quality casting - Automatic cross and longitudinal feed - Permanent lubrication - Automatic cross-stroke device - Rear splash protection - Grinding wheel - Grinding wheel flange - Pulling device - Balancing mandrel - Balancing scales - Dressing diamond - Machine light - Nivilier elements - Operating tool - Operating instructions - CE Special equipment of our storage machine: - Electric magnetic clamping plate 300 x 600 mm (fine pole) - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Automatic verti ...
Dear's Sale, used 1 complete engine Mak 6M552AK Also, cover, piston, liner, conrod new/used, fuel pump, 6cyl std cranksaft etc any parts. Brgds Hakan KUSCU +905323642509
Type: MZ73031A Number of spindles 3 Distance between first and last spindle 50 mm Adjustable drilling speed Height of the working table 820 mm Table dimensions 735×440 mm Number of clamps 2 Motor power 1,5 kW 400 V Motor r.p.m. 2800 r.p.m Working air pressure 6-8 bar Weight 75 kg Transporting dimensions 900x700x1500 mm
Type MB506C Working width 600 mm Overall length 2500 mm Measurements of fence 880x110 mm Fence tilting 45° Number of knives 3 Speed of spindle Motor power 4 kW
Type MB505C Working width 500 mm Overall length 2500 mm Measurements of fence 880x110 mm Fence tilting 45° Number of knives 3 Speed of spindle Motor power 4 kW
Type MB504C Working width 400 mm Overall length 2500 mm Measurements of fence 880x110 mm Fence tilting 45° Number of knives 3 Speed of spindle Motor power 4 kW
Piec Merrychef eikon® e2s jest doskonałym wyborem dla każdego, kto chce przygotować świeże, gorące posiłki na żądanie, gdzie wolna przestrzeń jest na wagę złota. Jest to najmniejsza jednostka oferująca najlepsze wyniki przyczyniające się do usprawnienia wszystkich czynności kuchennych. Piec jest łatwy w obsłudze, wszechstronny i zapewnia stały i wysoki poziom wydajności, który nieustannie wykracza poza oczekiwania. Piec jest dostępny jako eikon® e2s Classic w tradycyjnym wzornictwie Merrychef lub jako eikon® e2s Trend, z kolorową obudową na zewnątrz, łagodnymi krawędziami i miejscem na przechowywanie drobnych rzeczy na górze. Piec eikon® e2s jest idealnym sposobem gotowania, tostowania, grillowania, pieczenia i podgrzewania świeżych lub mrożonych produktów, takich jak kanapki, ciasta, pizza, ryby, warzywa i mięsa. Taka elastyczność wpływa poz ...
Type MJ1412-40 Feed speed (inverter) 9-35 m/min. Spindle diameter 70 mm Diameter of sawblades 355-405 mm Cutting width 400 mm Cutting height 100/115 mm Min. cutting length 290/480 mm Motor power 37 kW Total power 42,1 kW Transport dimensions 3000x1300x1500 mm Weight 2000 kg Delivery term: ~ 3 months.
Volcanoring mini with WOK attachment The inventor and developer of the Volcanoring has been working with logs and their pyrolytic combustion for 40 years. By installing a log wood stove with heat exchanger in his house, he learned about the primary and secondary air ducting for optimal burning of wood with minimal smoke development and minimal ash accumulation. On this basis, Ari Schär developed the Volcanoring with comparable properties in wood burning. This grill draws the air via an adjustable hole system in the base area of the bowl. The incoming air is preheated downwards by the heat radiation before it reaches the fire. As a result, the wood burns at a temperature of around 1000°C and leaves very little ash with little smoke development when the burning temperature is reached. When firing, the smoke development is correspondingly greater than when the operating temperature ...
with hood including fan with Gaer schrank 4 herds each 60x80cm long ago any stove with stone slab manual control with fixed water connection for each floor separately Each floor with separate swath box Fermentation chamber control manually Each floor with viewing glass Each floor with lighting Connection per stove 4.65 kW 400 Volt 3/N/PE 50 Hz Furnace is mobile on wheels checked and cleaned The furnace is fully assembled ready for loading in stock.
Key data: 500 , 520 , 380
Bearing number 1105-02750 Machine Type Machining Center - Universal Make DMG DECKEL-MAHO Type DMU 50 eV / 5 axes Built in 2001 Control type CNC Storage location FRANCE Country of origin Germany Delivery time immediately Freight base EX WORK Technical details x-way 500 mm y-way 420 mm z-way 380 mm Control HEIDENHAIN TNC 430 Spindle cone SK 40 Speeds 18,000 rpm Spindle motor 15 kW Rapid speed 50 m/min Table clamping area 500 per m. x 380 mm Feed range up to 20 000 mm/min Tool change device 32 fold Total power requirement 38 kVA Machine weight approx. 5.9 t Information - CNC - CONTROL of the display of HEIDENHAIN TNC 430 - 5-axis machine with B + C axis - Spindle on: 22 800 h - Current on: 38 000 h - Machine documents spaenefoerderer
ALREADY SOLD Hypet 500 for sale We only sell the machine with a mold 144 cavity complete mold 29/25 neck finish preform weight 10.63 grams made by Husky This machine HPP 4.0 and ISS, fast speed. Cycle 6.2 (83612 preforms per hour) 2 Million preforms per day Manufactured 2011 Installed 2012 380v 50hz Excellent condition
2930-12-334-9277 / 0052000675
2930-12-A07-0048 0030982820
2930-12-378-7717 5260981120
2930-12-378-7720 5260981220
Part Number: 7316 SPECIFICATIONS - Track width 350mm - working width of the shaft with saws 355mm - max blade diameter 450mm - max cutting height 170mm - blade bore diameter 70mm - table top dimensions 1850x790mm in advance: -Triggers - 2 slip shafts, smooth, metal - shaft with saws - 3 slip shafts, smooth, metal From below: - guide strip -Triggers -caterpillar - Pulling gear shaft, metal - central lubrication, electric - Infinitely variable feed speed - electric body lifting up/down approx. 1kW - feed motor 2.2kW - main motor 75kW - total dimensions length/width/height 2600x1800x1700mm - weight 2700kg – used multi-rip saw – very good condition Net Price: 68900 PLN Net price: 16000 EUR calculated according to the price of 4,30 euros (With higher fluctuations the price may change)
1 stitch bonding machine KARL MAYER type MALIMO MALIWATT 1405C N3600, machine fully overhauled in 2013, width 3600 mm, gauge 18, 2 bars,
1 PIMATEX type MTFC020 high temperature yarn dyeing machine vertical type, capacity 20 Kg, year 2004 carrier with 6 swords and each sword carries 4 cones gauge 6" = 24 cones each batch 1 PIMATEX type MTFC030 high temperature yarn dyeing machine vertical type, capacity 30 Kg, year 2001 carrier with 9 swords and each sword carries 4 cones gauge 6" = 36 cones each batch 1 PIMATEX type MTFC050 high temperature yarn dyeing machine vertical type, capacity 50 Kg, year 2001 carrier with 16 swords and each sword carries 4 cones gauge 6" = 64 cones each batch 1 PIMATEX type MTFC100 high temperature yarn dyeing machine vertical type, capacity 100 Kg, year 2001 carrier with 24 swords and each sword carries 6 cones gauge 6" = 144 cones each batch 1 PIMATEX type MTFC160 high temperature yarn dyeing machine vertical type, capacity 160 Kg, year 2001 carrier with 36 swords and each ...
Semi-automatic tube filling and sealing machine for PE, laminate and metal tubes, demonstration machine Capicity 10-20 tubes / min. Filling range from 5-250ml Tube sizes from D.13.5 - D.50mm with different format sets Ultrasonic sealing unit
2 identical machines are available ! Make : MAZAK Type: FF-660 Built: 2000 Control : FANUC 18iM Technical Dataen Axles ( X/Y/Z ) : 660 x 660 x 660 mm Pallet size: 500 x 500mm Tool holder: ISO 40 Number of tools: 24 Station Spindle speed: 15000 rpm Engine power: 15kW B-axis movement: 1 degree indexation Accessories/Description: Both machines are still in production, with the machines a total of 4 towers and 80 tool holders. The cover of the Y and Z axes has been renewed. various tools are delivered with the machine. Chip conveyors and documents are available.
Manual Heating Press Reitz MHSP5H - Manual Lifting Screw Press Static Press Force 5 KN (0.5 to) - Portable press frame made of polyamide PA 6G - Manual screw jack with spindle 20 mm, pitch 5 mm - With handwheel diameter 120 mm and handle - Gear reduction ratio 1 : 10, 0.5 mm spindle travel per handwheel revolution, thus only very little hand force required for high pressure. - Table size 100150mm - Clear width 60 mm - Punch size diameter 70 mm with 4 holes 8 mm to attach the Hotplate - Very easy operation due to spindle and worm gear - Total weight approx. 25 kg With 2 electric aluminum heating plates 1200 watts, heating area approx. 150 100 mm to 250°C, connection 230 V. With sensor and temperature control. Pressure-resistant insulating panels at the top and bottom for use in presses. Suitable for pressing, welding and gluing.
Technical data Manufacturer: Otto Schröder Stroke: 160mm hand adjustable Distance between the stand: 800mm Pass: 250mm Support table: 800mm, with 4 grooves subcircle of 400mm groove dimension 25x75mm Bore: table center of 70mm Table height: 835mm Dimensions: LxWxH 110x900x2200mm
used
Specifications: - Drilling capacity in steel ST 60 approx. 50 mm - Thread cutting up to approx. M 50 - Drilling spindle holder MK 5 - Drilling spindle stroke 300 mm - Radius min. / max. 320 / 1600 mm - Column diameter 320 mm - Boom stroke 650 mm - min / max – distance: - Spindle – base plate approx. 600 - 1250 mm - Machined base plate clamping surface approx. 1000 - 1700 mm - 18 spindle speeds 40 - 1800 rpm - 8 feeds 0.04 - 0.63 m/rev - Drilling spindle drive 400 V / 7.5 kW - E – hydraulic central clamping - Cube table with machine vice - Coolant device - Space requirement approx. W 2400 x H 2950 x D 1050 mm - Weight approx. 3500 kg
The machine packs in full cartons or trays. Capacity up to 80 cartons per minute. The change to the new carton format takes place from the operator panel - very quickly. Siemens S-7 control. Machine dimensions: Length: 9m Maximum width: 3.2m Height: 2.4 m. Weight: 3.5 tonnes The machine is equipped with a set of necessary spare parts for 2-3 years of operation. The machine after complete renovation in very good condition. Ready to work. We provide 12 months warranty. The condition of the machine and the level of modernity ensure many years of operation.
maximum number of results exceeded
please refine your search
