m t u used for sale

General SKU347X813 LocationBarneveld CEcheck MakeMix Italy Main Features MaterialStainless steel Volume20 Ltr. Motor4 KW Specified Features - Powder turbo mixer Powder turbo mixercheck Capacity10-20 Ltr. Trough sizesø 300x450 mm Inletø 150 mm Outletø 150 mm Glands air purgedcheck Motor4 kW, 400 volt, 1390 rpm With variable speed drivecheck With frequency controllercheck Speed mixing shaft± 200 rpm With lump breakercheck Motor0,55 kW, 230/400 V, 2740 rpm Speed lumpbreaker2740 rpm MaterialStainless steel 1.4301 (304) Information TypeMXC0030 Year of construction2008 Mounted on wheelscheck With switchgearcheck Floorspace1,120 x 0,70 m Total height1,520 m Weight320 kgPowder turbo mixersMix ItalyMixers > Powder turbo mixersBrand > Mix Italy What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for s ...

Manufacturer: SINICO Model: Sin-O-Matic Top 2000 Year of Manufacture: 2011 Type of Machine : Transfer Machine Maximum Cutting Capacity: 110 mm diameter Maximum Workpiece Length: up to 6,000 mm Cutting Capacity (mm): 350 mm Maximum Workpiece Length Setting: 65 mm (max) Installed Power: 24 kW Voltage / Frequency: 400 V / 50 Hz Control Voltage: 230 V Hydraulic Oil Tank Capacity: 45 L Machine Weight: 7,200 kg Find more here - / Contact us at -

Manufacturer: SINICO Model: Sin-O-Matic Top 2000 Year of Manufacture: 2005 Type of Machine : Transfer Machine Maximum Cutting Capacity: 81 mm diameter Maximum Workpiece Length: up to 4,000 mm Maximum Workpiece Length Setting: 340 mm Installed Power: 33.3 kW Mains Voltage / Frequency: 380 V / 50 Hz Control Voltage: 24 V Hydraulic Oil Tank Capacity: 260 L Hydraulic Circuit Pressure: 45 bar Machine Weight: 6,200 kg Find more here - / Contact us at -

General SKU395X1066 MakeKemutec LocationBarneveld Main Features MaterialStainless steel Volume600 Ltr. Motor2.2 KW Specified Features - Tumbler mixer Double cone tumbler mixercheck Capacity400 Ltr. (max. 600 Ltr.) Diameter900 mm Length/Depth450 mm Cylindrical length450 mm Conical length2x 450 mm Inlet300 mm Outlet150 mm With motor2,2 kW 380V Speed mixer17 rpm MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) Information No.001082 Year of construction1995 Floorspace1,8 x 1,5 m Total height2,5 m Weight1100 kgTumbler mixersKemutecMixers > Tumbler mixersBrand > Kemutec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Key data: 630 mm, 2 mm, 5 kW

General Technical Features   • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; Pushbutton for manual quick and fine adjustment of the planing thickness according to digital display, push button for knife shaft start and stop, integrated operating hour counter   • Thickness table: Electr. Thickness table adjustment with fine adjustment, travel speed 10 mm/s, tilt-proof mounted on 4 supporting spindles, table surface finely planed   • Feed: 2 speeds 6 / 12 m/min, electrically selectable even during planing, large rubber feed rollers Ø 85 mm to compensate for wood of different thicknesses, rubber rollers gentle o ...

General SKU095T577 MakeZondervan Sneek No.S-2109-01 Year of construction1989 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket1 Bar Main Features MaterialStainless steel Volume100 Ltr. Motor1.5 KW Specified Features - Tumbler mixer Tumbler mixer(1x) Capacity100 Ltr Diameter660mm Cylindrical length420mm Inletdia. 270mm Outletdia. 50mm With jacketcheck Max. temperature200 Degr. C. With motor1,5 KW, 220/380 Volt Speed mixer± 27 Rpm MaterialStainless steel 1.4401 (316) Information With switchcheck Floorspace1,5 x 0,8 m Total height1,4 m Weight430 kg Extra SpecificationsThe double jacket on this machine can only be used for cooling or heating, before or after the  :turning process. Not during! The same applies to the vacuum Tumbler mixersTea, herbs & coffeeZondervanMixers > Tumbler mixersIndustries > Food & Feed > T ...

General SKUR0171 MakeEgli Butschwil (CH) TypeK.MI. No.1-71 Year of construction1966 LocationBarneveld Main Features MaterialStainless steel Volume2000 Ltr. Motor22 KW Specified Features - Tumbler mixer Double cone tumbler mixercheck Capacity2000 ltr Diameter1900mm Conical length950mm Inlet680x375mm Outletdia. 100mm With motor400/690 50 hz 22 kw 1470 rpm - 440/460 60 hz 25 kw 1765 rpm MaterialStainless steel 1.4401 (316) Information Floorspace3,1x2,2 M Total height2,7 M Weight2000 KgTumbler mixersSpicesTea, herbs & coffeeButschwilMixers > Tumbler mixersIndustries > Food & Feed > SpicesIndustries > Food & Feed > Tea, herbs & coffeeBrand > Butschwil What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Nethe ...

standard turning dia.:200 turning length:max. 810 mm control:MSX-701 MAPPS IV greates pass round over bed:800 mm Max. distance between centres:1130 mm max. turning diameter:320 mm max. workpiecediameter:300 mm bar material dia.:65 mm Traverse X-Axis 1:210 Traverse X-Axis 2:210 mm Traverse X-Axis 3:210 mm Traverse Y-Axis 1:110 (+65/-45) mm Traverse Y-Axis 2:110 (+45,/-65) mm Traverse Z-Axis 1:300 mm Traverse Z-Axis 3:300 mm Traverse Z-Axis 2:810 mm Traverse B-Axis:870 mm turning speed range - spindle:5.000 1/min Number of spindle speed ranges:2 . spindle nose:JIS A2-6 spindle bore:73 mm spindle bearing diameter:120 mm C-Axis:0,001 ° turning speed range - spindle:5.000 1/min spindle nose:JIS A2-6 spindle bore:73 mm bar material dia. max:65/52 mm spindle bearing diameter:120 mm C-Axis:0,001 ° Number of Turrets:3 . Number of tool stations:16 x 3=48 pos Schank height for square tool:20 mm D ...

Weld-on part with VTN / Martin old small mount, Dimensions of the mount:, Bolt diameter: 50 mm, Handle/mounting width: 190 mm, Bolt spacing [center - locking plate]: 320 mm

MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindl ...

Safeline Mettler Toledo metal detector, type: M34R, serial number: C220066207, year of construction: July 2022, 200-240 V, 1 Ph, 48-63 Hz, 10 A, weight: 243 kg, plastic belt, belt width: 200 mm, clearance: 250 mm x 120 mm, total dimensions: 1200 mm x 850 mm x 1100 mm.

Safeline Mettler Toledo metal detector, type: M34R, serial number: C220066206, year of construction: July 2022, 200-240 V, 1 Ph, 48-63 Hz, 10 A, weight: 243 kg, plastic belt, belt width: 200 mm, clearance: 250 mm x 120 mm, total dimensions: 1200 mm x 850 mm x 1100 mm.

Safeline Mettler Toledo metal detector, type: M34R, serial number: C220066205, year of construction: August 2022, 200-240 V, 1 Ph, 48-63 Hz, 10 A, weight: 243 kg, plastic belt, belt width: 200 mm, clearance: 250 mm x 120 mm, total dimensions: 1200 mm x 850 mm x 1100 mm.

Thompson Meat Machinery mobile mixer-grinder, type: 900E, serial number: 900E 14.5.04, year of construction: 3-2004, 415 V, 50 Hz, 8.2/2.8 A, 4/1.1 kW, 2860/1400 rpm, diameter plate: 90 mm, total dimensions: 1200 mm x 900 mm x 1300 mm. Including additional mixing arm. Missing knives.

Agnelli Macchine/Pavan Toresani/Storci make-up and packaging line pasta and lasagne, consisting of: - 4 flour silos with flour transport system, - 2 Pavan Toresani dough mixers, model: GRIM6P, serial number: X17201, year of construction: 1998, - REC-500 dough kneader, - Agnelli extruder and 3 roller flattening machines, - Storci tunnel inline belt pasteurizer, - Storci tunnel belt dryer, - Storci inline belt chiller, - Elevating belt with replaceable cutters for 3 types (widths) of pasta sheets, - Pendule system for laying of product in consumerpack bottoms, - Multivac thermoformer, model: R535, serial number: 127580, year of construction: 2009, - Large amount of switch cabinets and spare parts.

1 x NEW 'Bainite' (India) Make 1000mm (42in) wide x 400mm (16in) dia two roll mill, Hydraulic nip adjustment (dual acting cylinders), Peripherally drilled chilled cast iron rolls (Hardness 65/72 Shore), with anti friction roller bearings, Friction ratio 1:1.08, Hinged guide plates, Lubrication system comprising pneumatic intensifier with grease reservoir, Electro pneumatic brake with power fail safe mechanism. Safety bars fitted to front and rear. Compact right angle drive with 45kW Siemens AC variable speed squirrel cage motor through heavy duty helical design direct drive reduction gearbox (SF 2), Back roll speed 18rpm/front roll 16.6rpm. All mounted on a compact design fabricated steel bedplate. Stainless steel tray underneath. Including electrical controls comprising Siemens G130 VFD drive and S7-1200 plc with HMI. CE marked, with full Technical file, Documentation and S ...

MSE 470/10 Product no.: RE-HU-2014-0412-1 Attachment: Chamber filter press, drip sealing used Usage area: Chamber filter press Design: page Holm led Year of construction: 2002 Filter plate format: 470 x 470 mm Number of plates: 10 Filter plates: PP Thickness: 25 mm Filter cloths: optionally available in voting on the medium Procedure: open Filter surface: approx. 3.3 m ² Presses contents: approx. 48 dm3 Filter pressure: 15 PSI Plate transport: manually Pumps: optional Buying or renting: Visit the facilities in consultation with us to work. You want to rent this facility or to buy? Contact us, we are available. There are two identical facilities are available.

Hammer mill Manufacturer: NEUE HERBOLD Type HM 450/300 Working width: 300 mm Rotor width: 450 mm Drive: 18.5 kW -NEW MACHINE- size reduction of brittle plastics like electronic scrap, wood scrap, and organic insulation material.

Very good metal separator / metal separator for the separation of all metals (including stainless steel, VA) from a material flow. Can be used before or after a NO-ne ate separator (eddy current separator) or as a stand-alone machine. Separation of all metals from approx. 1 mm grain size. Meaningful use for metal contents up to 60% metal content. Unique flap technology (flipper), no compressed air required. The machine is immediately ready for operation, can be inspected and tested. On request also with camera! If the machine is too small, we build it larger. This is our demo machine. Maximum throughput depends on the material and purpose. Price matter of negotiation!

X-ray unit Siemens Multix / Vertix with 3D III Deckensrativ and Polydorus LX X-ray Generator

Type : T900 Spindle-30 mm spindle rotation speeds- 2500 / 5000 /8000U /Min/rpm Spindle tilt- 5° to +45° spindle trave-140 mm max. clamping height-125 mm max. tool diameter-230 mm Table dimensions-1020x700 mm table height-900 mm dust collector plug-60/120 mm engine power-3 kW 400V weight net/gross-280 kg packaging dimensions-1150x1155x730mm

Lot 592 500L steam jacketed hemispherical scrape surface vessel, bottom central discharge, half moon lid, agitator (six sets of removable propellers along shaft)

Reed 42" x 16" Two Roll Mill. 40HP Motor, with clutch brake. Friction ratio 1.1 Manual Nips. On one-piece steel bedplate.

0: 200 °C Torque: - 0 Dimensions (HxWxD): 680 x 1320 x 760 mm weight: 177 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

(side-front moving table) Nominal force: 1000 ton Slide stroke: 400 mm Continuous slide strokes per 1 min: 20 Single slide strokes per 1 min: 16 Shut height: 1060 mm Slide adjustment: 320 mm Table dimensions: 3150x1800 mm Slide dim., front-back: 1700 mm Window H 1500 x W 1900 mm Hydro pneumatic cushion in table clamping force at P = 0.42 MPa (P = 4.2 kg / cm2), kN 2000 ejection force P = 0.45 MPa (P = 4.5 kg / cm2), kN 200 Main-drive electric motor power: 132 kW DIMENSIONS: 5150x4700x11400 H floor7830 mm WEIGHT:193 ton

Cold water high-pressure cleaner Welcome to the innovative and compact me-Class! The DYNAJET 280me with up to 280 bar Working pressure convinces in addition to its performance above all by its compact Dimensions and high mobility. This makes the versatile high-pressure cleaner one of the All-rounders in our offer. Construction Robust, powder-coated steel frame for optimum machine protection and long service life 1-axle chassis with pneumatic tyres for easy manoeuvring on site Flexibility and support due to perfect center of gravity High durability due to screw connections made of stainless material Splash-resistant (IP54) control cabinet for versatile and smooth use Operating hours counter for optimal post-calculation Drive Manual star/triangle start to protect the power grid Compact and robust industrial electric motor for long service life with maximum running times ...

Dynajet 350mg cold water cleaner with petrol drive Small, efficient and independent: dynaJET's compact mg-class with powerful Petrol engine. Just like the other DYNAJET trolleys of the mg class, the DYNAJET 350mg with up to 350 bar working pressure, especially due to its low weight, the small dimensions and the easy loading and transport possibilities. Construction • Robust, powder-coated steel frame for optimum machine protection and long service life • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Flexibility and support due to perfect center of gravity • High durability due to screw connections made of stainless material • Crane eyelet for easy transport • Operating hours counter for optimal post-calculation • 12V socket to secure the power supply of the Dynabox hot water module (optional) Drive • Vibration-proof starter battery ...

Dynajet 500mg cold water cleaner with petrol drive Small, efficient and independent: dynaJET's compact mg-class with powerful Petrol engine. Just like the other DYNAJET trolleys of the mg class, the DYNAJET 500mg with up to 500 bar working pressure, especially due to its low weight, the small dimensions and the easy loading and transport possibilities. Construction • Robust, powder-coated steel frame for optimum machine protection and long service life • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Flexibility and support due to perfect center of gravity • High durability due to screw connections made of stainless material • Crane eyelet for easy transport • Operating hours counter for optimal post-calculation • 12V socket to secure the power supply of the Dynabox hot water module (optional) Drive • Vibration-proof starter battery ...

Qty 1 x Shaw 60in x 22in two roll mill, Manual nip adjustment, Peripherally drilled rolls (front and back), Hinged guide plates, Sleeve bearings with motorised lubrication, Right angle drive gearbox with 115Kw DC variable speed motor, All mounted on a heavy duty bedplate. Carter stockblender mounted on too. Complete with controls etc and in very good condition.

Qty 1 x Guix 75 internal mixer, Chamber volume 75L, Tangential rotors, Hydraulic drop door with linear actuator and latch, Motorised lubrication and process oil system, With 250kw A.C. 1470rpm, 400V motor and controls. Rotor speed approx 60rpm. All mounted on a heavy duty steel base. Complete and in very good condition. 

Detailed info: Aluminium format sliding carriage with hardened steel guide rods. Large solid work table made of grey cast iron. ø190 mm table opening with undercounter extraction. Electronic speed display. Milling stop ø250 mm. Built-in milling spindle lock. 4 speeds as standard. Milling spindle can be swiveled backwards. With integral stop 500 mm and telescopic stop 900 mm, extendable, with 2 stops and tensioners made in EU Technical data: 400V Spindle diameter 30 mm swiveling spindle 90°/45° Spindle height adjustment 175 mm Spindle clamping length 125 mm tool diameter 250 mm with optionally available tenon slot hood 320 mm Spindle speed 1400/3500/6000/8000 Weight 390 kg

Te Koop: Manifold Tuchenhagen Mixproof valve. 83-85 mm en 2 aansluitingen.

Te Coop: Manifold Tuchenhagen Mixproof valve. 83-85 en 3 aansluitingen

Te Koop: Manifold Tuchenhagen Mixproof. 83-85 mm en 4 aansluitingen.

MARTIN T92 automatic roll forming machine with CNC control and 6 frequency-controlled hobic axes Program memory, tool memory, collision protection, diagnostic function, etc. Brand: MARTIN Type: T92 Standardization: CE Feed table: 2000 mm Table height adjustment: Max. Spahnabname 10 mm Stop bar: Manual adjustment 10 mm Planer width: 22 - 260 mm (with pendulum axle preparation) Planer thickness: 5 - 180 mm Roll forming depth: max: 40 mm (with suitable tool) Min. product length: 380 mm Operation: CNC control with LCD user interface, for spindle positioning, feed, machining programs, tool data, diagnostics, etc. Storage option of up to 200 profiles and planer dimensions incl. the associated Tool information including all axes of the machine; Storage option for 200 tools incl. reference data; Integrated operating hours counter with total and batch running time;  ...

Brand: MARTIN Type: T90 with 7 spindles Feed table: 2000 mm Table height adjustment: Max. Spahnabname 10 mm Stop bar: Manual adjustment 10 mm Planer width: 22 - 240 mm (260 possible with ingekammerte planing heads) Planer thickness: 5 - 170 mm 1. Planer shaft dresser: Spahn removal max. 10 mm, clamping length 240 mm, flight circle min. ø100 mm - max ø125 mm, Z-4, 6.000rpm, 7.5 KW 2&3. Spindle: Vertical callibrier planing and contour shafts, Spahn removal max. 10 mm, clamping length 160 mm, flight circle min. ø100 max ø125 mm, Z-4, 6.000 rpm, 7.5 KW 4. Thickness shaft/upper shaft: horizontal spindle tap removal: max. 8.5 mm, clamping length 240 mm, flight circle min. ø100 mm - max ø125 mm, Z-4, 6.000rpm, 7.5 KW 5. Top spindle 2nd profile shaft horizontal, Spahn removal: max. 8.5 mm, clamping length 240 mm, flight circle min. ø100 - max ø180 mm, 6.000 rpm, 7.5 KW, adju ...

TACCHELLA ELEKTRA 1518 MPC CNC grinding machine was built in Italy in 1999. Characterised by high reliability and performance, the machine is used in the process of highly accurate grinding of the external rotating surfaces of workpieces with a maximum length of 1500 mm and a diameter of 350 mm. The TACCHELLA CNC shaft grinding machine has a large workspace with tailstock, grinding wheel spindle and workpiece spindle. After placing a shaft with a maximum weight of 50 kg in the spindle holder, the workpiece is ground at high speed by an incremental encoder driven grinding wheel with a maximum diameter of 450 mm. In order to simplify the machining process, the ELEKTRA 1518 MPC CNC grinding machine is equipped with state-of-the-art features, such as the HOFLER BALANCE SYSTEMS VM 24 operator panel and a functional and user-friendly FAGOR CNC controller, which allows full control of the m ...

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Manual nip adjustment, peripherally drilled rolls, Unidrive gearbox with flexible couplings, single 106kW DC variable speed motor. Very good condition.

Qty. 1 Second-hand aluminium foil rolling mill plant Mfc.: Sambhav Built: 1993 - 2012 Revamped: 2015 Foil width: 1000 mm Entry thickness: 8 mm Exit: 8 microns Consist of: Melting furnace 22 MT Holding furnace 15 MT Strip caster Roughing rolling mill Intermediate foil mill Finishing foil mill Heavy slitter Strip slitter Foil separator Qty. 2 Foil slitters Annealing furnace

Qty 1 x Schwabenthan 200mm dia x 450mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Jahnel gearbox with 10HP motor to each roll (variable speed), Variable friction ratio/roll speeds, Stainless steel interlocked guards and tray. Complete with electrical controls and in good condition. O/a dimensions 2700 x 1500mm

Qty 1 x Schwabenthan 150mm dia x 350mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Even/friction selectable gear ratios, Motor mounted under frame. Complete with electrical controls and in good condition. O/a dimensions 2400 x 850mm.

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, FULL Unidrive gearbox with flexible coupling, 2 x 68kW DC variable speed motors. Variable friction ratio/roll speeds. In very good condition.

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, Unidrive gearbox with flexible couplings, single 138kW fixed speed motor. Fixed friction/roll speed. In very good condition.

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, FULL Unidrive gearbox with flexible couplings, 2 x DC variable speed motors. Variable friction ratio and roll speed. In very good condition.

FINLAY / TEREX 390 HydraScreen, screen / screening, Deutz engine, including additional belts, German Machine, 5.150 h, year 1996

Demo machine from demonstration pool Enormously versatile cable slot machine thanks to individually adjustable, standing cutting knives. Cables are cut as standard by two knives penetrating the insulation on the side. The series was significantly improved in terms of safety in 2014 and now features a short feeder for thin cables and a long feeder for thick cables. The change is made in seconds by means of a rotary mechanism. The simplicity in the construction and the construction with two powerful, synchronously running rollers is left. With coarse gearing, even thicker cables are safely fed into the knives and transported further after the cutting process for removal. Blunt knives can be easily and cost-effectively sharpened with a standard grinding machine.

C.M.S. CNC Turret Head Machining Center Model TRIAX R-65 Sn 285, 1986 IBH controller modus 1 (2) vacuum tables- each 48” deep x 60” long. (1) five station lathe section. Max. part 6.5” x 45” (2) vacuum pumps 5 hp. each. Total of (30) routers. (6) station turret with (5) routers per station. Consisting of; (2) stations of (5) routers each - 2 ½ hp. each. (4) stations of (5) routers each – 8 hp. each. Digitizing table for flat work or carving. Lathe section for spindle work (fluting, carving). Unit complete with extra parts and lots of tooling.

Used weighing and packaging machine used for packing granules by TÉCNICAS MECÁNICAS ILERDENSES SL. model ILERSAC LBSD. New 2013. TECHNICAL DATA: PRODUCT CHARACTERISTICS: - Product BLACK COAL IN PROSPECT. - Density 340 / 645.16 kg/m3 - Fluidised Yes - Granulometry 30 µm - Sack type PAPER - OPEN BAGS - Bag weight 12 kg - Dimensions of bag 740x500x160mm - Dimensions of CP1 pallet 1200x1000x150 - Maximum pallet height 1800 mm Maximum production of 90 bags/hour CONNECTIONS: - Electrical connection 380V III+N+T 50 Hz - Installed power 12 kW - Control voltage 24 V - Air pressure 6 bar - Air consumption 150 NL/min. - Aspiration 1900 m3/h - 21 m/s Main features: - Programming of reading stability conditions. - Programming of weighing cycle and autocorrection parameters. - Zero variation detection range. - Precision: 5000 homologated divisions. - 50 operating reci ...