m t u used for sale

Brand: Martin Type: T25 M-No.: V172604 Year of construction: 1990 Motor power: 5/6 kW Swivel milling spindle: -5° - +45° Milling mandrel : 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Cone of the milling spindle: MK5 Table size: Table extension 2,500 mm and table distribution (= extendable support) Automatic milling spindle start-up/bremzing via rotary knob Control panel: eye level with digital reading Spindle height -5° - +45° electromotive angle adjustment with digital readout Inclination -5° - +45° 150 mm Electromotive heights Adjustment with digital readout Feed: five-pole. Socket with operation via central control

Martin T45 Thickness Planer Brand: Martin Type:T45 Main motor 5.5 KW - 400 V Speed 5,000 or 6,000 tpm Knife shaft Z-4 Tersa Flight circle ø125 mm Planer width 6,300 mm Planer thickness 2.8 - 300 mm Spahn removal max. 12 mm Thickness table length 1,260 mm Feed 6-12 m/min. weight 1.500 KG Condition: NEW Price Dealer price: Options: Planing shaft: X-Plane planing shaft with 4-fold reversible blade T45 Contour: Machine for profiling, with Z-4 Tersa, Z-2 Contour profile inserts T45Plastic: Machine especially for plastic processing Motor 7.5 KW, 11 KW and frequency controlled Thickness table extension: import and export side640 mm or 1,200 mm Feed: Frequency control from 2 to 25 m/min. Indent: Articulated feed whales Pull-out whales: Second pull-out whales Machine lubrication: Central with hand pump or automatic Table bezel: import has been atta ...

Brand: KAMRO Type: DAK510 Year of construction: 1978 Planer width dresser/thickness planer: 530 Knife shaft: ø120mm, Z-4 tersa or X-Plane Speed: 5,000 rpm Motor: 4 KW Feed rolls: imports Toothed steel, Export rolls: rubber Planing height: 3 - 250 mm Table length dresser: 2,300 mm Table length thickness table: 920mm Chip removal: 8mm Feed: 6/12 m/min weight: 1050 KG Options: X-Plan Wave SuvaMatic Motor: 5.5 KW or 7.5 KW Open table electrically Feed frequency control

Automatic hardness testing device with 4 heads Micro IRHD IRHD Type L IRHD Type N IRHD Type H The device needs gibitre software installed on the computer to work. The device consists of a stand and 4 heads

Technical data approx.: - Largest turning diameter - over bed 560 mm - via flat slide 315 mm - Center width 1500 mm - Traverse transverse slide approx. 300 mm - Spindle bore 80 mm - Mounting cone of the tailstock quill MK 4 - Travel of the tailstock quill 150 mm - Spindle speeds 1 - 2500 rpm - Rapid traverses X / Y -with: - NC – FANUC control - 2 E. handwheels for manual turning -Tailstock - Coolant device - Drive 400 V / 7.5 kW - Space requirement approx. W 3250 x H 1750 x D 1500 mm - Weight approx. 3800 kg

Key data: 360 mm, 497 mm, 4000 1/min

CNC Lathe MAZAK QT SMART 250 ML (500U) Year of construction 07-2015 Mazatrol Smart Control Travel X/Z: 225 mm/605 mm. Max. turning diameter 360 mm Max. swing diameter 660 mm Max. turning length 497 mm Max. bar passage 80 mm Spindle motor AC18.5 kW Max. spindle speed 4,000 rpm 12-speed tool turret 12 driven tool stations AC 5.5 kW Driven tools max. speed 4,500 rpm Toolsetter Automatic Parts Catcher Tailstock High Pressure Pump Interface for bar feeder Conveyor CE mark

Key data: 350 mm, 500 mm

Stock number: 3920 CNC LATHE Manufacturer: Mazak , Type: Quick Turn Smart 200 Year of Make: 2012 Specifications: Max. circumferential diameter 350 mm dia. Max. turn. About Bed 660 mm Dia. Turning length 500 mm Main motor power 15 kw Spindle bore 65 mm dia. X axis movement 195 mm Z ash movement 560 mm Tool turret with 12 stations Controlled in 2 Axes Accessories: Hydraulic Main Centering Chuck 200 mm dia. Various tool holders. Cooling water system. Hydraulic tailstock. Length: 2700mm, Height: , Width: 1680mm, Weight: 4410 kg

MAZAK Quick Turn 15, built in 1989 fully functional with immediate effect.

Double Shield Tunnel Boring Machine for hard rock Typ of TBM Hardrock Double Shield TBM Manufacturer Robbins / Herrenknecht Year of manufacture 2015, 2020 Boring diameter DME = 7.100 m Length 14 m Main drive power 7 x 330 kW = 2.310 kW Main trust force 33.780 kN @ 350 bar Stroke length 1.760 mm Installed power 4.800 kVA Weight ca. 770 t Find more here - /

Turning diameter 350 mm Turning lenght 550 mm Spindle speed 5000 rpm Bar work diameter 65 mm Controller MAZATROL smart

Manifold GEA TUCHENHAGEN Mixproof-valves - Flushing - Balanced Valve top type: TM15N2B0M/66 DN25 NL = 8x DN25 KWIK = 3x DN 65 = 2x DN 80 = 27x Please contact u for more information

Tatham Twin shaft paddle mixer Serial: CO1040 Stainless, 1200Kg twin shaft paddle mixer, New motors, new gearbox, new chains, with stainless holding hopper at base

Inline Tray Sealer Make: MPE Model: I0 Built 2017 Stainless steel Mould set: D2: 195 X 154MM 16 Cycles min, Gas facility

Key data: 410 mm, 220 mm

Dressing and thickness planing machine TOP Master FS 410 Function tested Working width: 410 mm Max. planing thickness: 220 mm 4-knife shaft Dressing table length: 2000 mm 2 feed speeds Feed and Pull Roller: Steel Table rollers Tiltable stop Very good condition Weight approx. 900 kg

The positions of the rotating tools are: T01-02-03-04 / T22-23 / T34-35 - equipped with Iemca Boss 332E/32 new in 2006 - lot of collets / guide bushes - MSC-501 Control - the machine has always worked with oil.

Martin T25 Swivel spindle milling machine with 5 axis control Brand: Martin Type: T25 M-No.: V252368 Year of Make: 1998 Engine power: 7.5/9.5 kW or 10/13 hp, 2 speeds Dalander engine Swivel milling spindle: -5° to +45° Milling mandrel: ø30 mm Spindle mount: ISO quick-change system with 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Table size: Table extension 2,400 mm and table widening (=extendable support) Control panel: CNC control at eye level with LCD screen Spindle height CNC-controlled electromotive spindle height adjustment (program controlled or manual control) Tilt -5° - +45° CNC-controlled electromotive angle adjustment (program controlled or manual control) Stops: CNC-controlled electromotive adjustment of the two stops in relation to the milling mandrel (program controlled or manual control) CNC-controlled electr ...

Key data: 3 mm, 10 kW, 30 mm

Martin T26 Swivel milling machine with axes, digital display and speed control of the 7.5 kW spindle Brand: Martin Type: T26 with frequency control M-No.: 20000 Year of manufacture: V415216 YouTube: Control: Electrical adjustment digital readout; Spindle height & inclination, jaw stops-chip removal, electrical adjustment of feed device height Control panel: At eye level, swivel Motor: 7.5 kW, 10 hp - 220 V with frequency-controlled speed Milling spindle: ø50 mm spindle met SK40 en Dornfix quick-change system Milling mandrel: -45 to + 45° CNC or electrically manually adjustable with rapid traverse and creep traverse Spindle height positioning: 150 mm electrically adjustable with rapid traverse and creep traverse and digital display Calibration device: For exact 0 positioning of the milling spindle Electro-pneumatic spindle locking mechanism for tool change Millin ...

Key data: 1 mm, 10 kW, 30 mm

Martin T26 Swivel milling machine with axis digital display and 7.5/9.5 kW-2 speed spindle Brand: Martin Type: T26 M-No.: 2005 Year of Make: V453599 Control: Electrical adjustment & digital readout; Spindle height & inclination. Control panel: Machine stand Motor: 7.5/9.5 kW, with 2 levels of speed adjustment Milling spindle: ø40 mm spindle with SK40 en mandrel quick change system Milling mandrel: -45 to + 45° electrically adjustable with rapid traverse and creep traverse Spindle height positioning: 150 mm electrically adjustable with rapid traverse and creep traverse and digital display Electro-pneumatic spindle locking mechanism for tool change Milling spindle lubrication with long-term grease via central lubrication Speeds: 7.5/9.5 kW - 2 levels speed control Cone of the milling spindle: SK-40 with mandrel fix quick-change system Table size: Cast iron table  ...

Key data: 3 mm, 8 kW, 30 mm

Martin T26 Swivel milling machine with axes Digital display and speed control of the 7.5 kW spindle, tenon table Brand: Martin Type: T26 with frequency control M-No.: 20000 Year of manufacture: V409217 YouTube: Control: Electrical adjustment digital readout; Spindle height & inclination, jaw stops-chip removal, electrical adjustment of feed device height Control panel: At eye level, swivel Engine: 7.5 kW, 10 hp with frequency-controlled speed Milling spindle: ø40 mm spindle with SK40 en mandrel quick change system Milling mandrel: -45 to + 45° CNC or electrically manually adjustable with rapid traverse and creep traverse Spindle height positioning: 150 mm electrically adjustable with rapid traverse and creep traverse and digital display Calibration device: For exact 0 positioning of the milling spindle Electro-pneumatic spindle locking mechanism for tool change  ...

Key data: 3 mm, 6 kW, 30 mm

Martin T 26 Swivel Drums with 4-Axis CNC Control Brand: Martin Type: T26 CNC M-No.: 2002 Year of Make: V432822 Control: 4-as CNC besturing; Hoog-Laag, Tilt, Table Ring Positie, Frees Aanslag Control panel: Op ooghoogte en draaibaar Remark: Special colour scheme Martin 75 years old Ral 7035 & 6004 Engine power: 7.5/9.5 kW , 6.8/8.2 PK with 2 toeren motor (verdere toerentallen door riem omleggen) Swivel milling spindle: -45 tot + 45° Milling mandrel: ø40 mm freesspil met SK40 en Dornfix-snelwisselsysteem Height adjustment milling spindle: Electric hoogteverstelling van de freesspil 150mm met snel- en kruipgang schakelaar IJk-apparaat voor de hoogte instelling van het gereedschap Elektro-pneumatische vergrendeling van de frees-spil d.m.v. keuzeschakelaar Freesspil-smering met duurzaam vet vanaf centraal smeerpunt Speeds: 2 toerenmotor 3000-6000 tpm en 4.500-9000 ...

Key data: 3 mm, 10 kW, 3 mm

MARTIN T27 FLEX with CNC 4-axis control, electric height adjustment of the feed T27FX/1-a Swivel spindle milling machine T27 FleX in CE version with infinitely variable speed control T2704-a Stepless speed control with 9.5 kW motor. (13 hp) 1,000 – 12,000 rpm, incl. T2711-A Digital Display Insertion Stop in Control T2712-a electric motor. Positioning of the milling fence T2714-a electric motor. Positioning table opening for WZ Ø70-250 T2715-a electric motor. Positioning Feed Support T2731-a Table extension on both sides + pull-out workpiece support T2745-A Swing Away Device Milling Fence T2770_85-a milling mandrel with HSK 85 mount and PowerLock (compatible with Weinig PowerLock) T2773-a Milling mandrel HSK 85 Power Lock ø.. Mm

Key data: 500 mm, 8 mm, 6 kW

Martin T54 Surface Planer, with Tersa Z-4 and Hydraulic Table Lift Brand: Martin Type: T54 Year of Make: 1997 M. No.: V240171 Motor power: 5.5 kW Knife shaft: 5,000 tpm Z-4 Tersa Solid Steel Shaft ø125 mm Planing width: 5 Spahn removal: 8 mm Table length: 2,850 mm Task - table length: 1,640 mm Acceptance - table length: 1,200 mm Table height: 855 mm Dressing fence: 45° tiltable with Dun planing bar and width adjustment on lineair guides Weight: 1,200 KG Option: SuvaMatic protection device Condition: Full-function tested

The machine is in good technical condition, a test run is possible by prior arrangement. Accessories included.

Marel concept 500 labelling machine, - top and bottom labelling machine

Mettler Toledo labelling equipment., More information soon.

Mettler Toledo PAS 3012 check-weigher with labeling machine., The labeling had can be electrically moved in all directions for an accurate positioning of the labels., - Max. weight: 6KG, - Min. weight: 0.020KG, - E: 0,001KG, - Rated for 70 packs per minute

Key data: 630 mm, 280 mm, 8 kW

Martin T44 Thickness Planer Brand Martin Type T44 M-No.: V 257340 Year of Make: 1999 Main motor 7.5 KW - 400 V Speed 5,000 tpm Knife shaft Z-4 Tersa Circle ø125 mm Planing width 630 mm Planing thickness 2.8 - 280 mm Spahn removal max. 12 mm Thickness table length 1,260 mm Feed 2 speeds 6 / 12 m/min, Weight 1,500 KG

Control Mazatrol Smooth G Max. turning diameter 380 mm Travel X/Y/Z: 234/100/625mm Main spindle Max. speed: 4,000 rpm Spindle motor drive power: 26 kW Max. bar passage: 80 mm Tool turret 12 tool stations 12 driven tool stations, 5.5 kW Max. speed: 5,000 rpm More options Prog. Tailstock 3-jaw chuck Kitagawa BB210 Parts catcher Interface for rod magazine Tool holder package, 3 powered holders + 8 fixed holders Coolant high-pressure pump, 15 bar Conveyor

BIG Genie Terex adapter suitable for Manitou mount, - New product, - Year of manufacture: 2025, - Weight: ~ 150 kg, Many other adapters available for a wide variety of mounts !

MW TECHNOLOGIES BENCH TOP INSPECTION SYSTEM, MODEL MIH-DX Year of construction: 2006 Machine for the inspection of vials, ampoules and other components for particulate particles. Optimized for small workstations, laboratories or production lines, suitable for integration in GMP-controlled environment. Stainless steel construction. As the unit is rated 115 V/60 Hz, for operation in Europe (230 V/50 Hz) adapter or transformer may be required unless internal wiring has been converted. 7 units of this machine are available. CHARACTERISTICS Enclosed hood with viewing window and adjustable lighting system Controls on front panel: power switch, lighting selector, intensity dial Lighting: On/off selection, intensity adjustment knob (as visible in photo) ENERGY CONSUMPTION Voltage: 115 V AC (standard US mains); Current: 5 A; Frequency: 60 Hz; Phase: single phase  ...

General SKU337U827 LocationBarneveld MakeServolift TypeHF No.10890 Year of construction2004 Main Features MaterialStainless steel Motor1.5 KW Height3950 mm Specified Features - Lifting/tilting machine MaterialStainless steel 1.4301 (304), Stainless steel 1.4541 (321) Lifting + tilting machinecheck Max. weight200 kg Lifting heightMin. height 440mm, max. height 3950 mm Hydraulic drivecheck With hydraulic unitcheck Lotz, Type: MC4 Motor230/400 volt, 1,5 kW, 1450 rpm Suitable for product sizes load drum diameter 560mm Information Total height5,3 m CEcheck With switchcheck Floorspace1x2,2 mLifting/tilting machinesServoliftConveying systems > Lifting/tilting machinesBrand > Servolift What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect th ...

General SKU362U983 LocationBarneveld MakeServolift TypeMC No.11576 Year of construction2007 Main Features MaterialStainless steel Volume1200 Ltr. Motor14 KW Specified Features - Tumbler mixer Tumbler mixercheck Capacity1200 kg With motor2x 5,5 kW (400 V, 1430/64 rpm) With variable speed drive5-15 rpm MaterialStainless steel 1.4301 (304), Stainless steel 1.4541 (321) Information With switchgearcheck CEcheck Floorspace3,10 x 2,30 m Total height3,20 m Extra SpecificationsContainer type SL containers. hydraulic unit, 2,2 kW Tumbler mixersServoliftMixers > Tumbler mixersBrand > Servolift What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU401W1244 LocationBarneveld MakeAva-Huep TypeHTC2100 No.5974 Year of construction2009 Main Features MaterialStainless steel Volume2100 Ltr. Motor55 KW Specified Features - Powder turbo mixer Powder turbo mixercheck T-arms10 pieces Capacity2100 l. Useful capacity1600 l. Trough sizesDia. 960x2800 mm Inlet900x1400 mm Inspection hatch550x300 mm OutletDia. 350 mm Max. temperature+5°C/+80°C Glands air purgedcheck Motor55 kW, 400 volt, 1460 rpm Speed mixing shaft35 rpm With lump breakercheck 3x Motor5,5 kW, 400 volt, 1438 rpm (3x) MaterialStainless steel 1.4571 (316Ti) Information Total height1,36 m Weight5000 kg Floorspace5,72x1,76 m Extra SpecificationsWithout outlet lith. paddles are equipped with hardop welding. Powder turbo mixersAva-HuepMixers > Powder turbo mixersBrand > Ava-Huep What you can expect from Foeth: -- Machine is in working conditio ...

General SKU207U080 LocationBarneveld Makem-tec mathis technik GmbH TypeTaumelmischanlage No.75300040001 Year of construction2004 Main Features MaterialMild steel Volume800 Ltr. Motor9.2 KW Specified Features - Tumbler mixer MaterialMild steel Tumbler mixercheck Barrel mixercheck Capacity190 Ltr., 800 Ltr. Inletdia. 450 mm Outletdia. 260 mm With motor9,2 kW 230/400 Volt Tumbler mixers Capacity190 Ltr., 800 Ltr. Inletdia. 450 mm Information Mounted on framecheck Total height3,6 m Weight3260 kg CEcheck Floorspace2,4x2,8 m Extra Specificationswith tank: : max. 190 Ltr., inlet: 450, outlet: 260 mm max. 800 Ltr., inlet: 450, outlet: 260 mmTumbler mixersM-Tec, Mathis TechnikMixers > Tumbler mixersBrand > M-Tec, Mathis Technik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any desti ...

General SKU054E249 LocationBarneveld MakeL.B. Bohle GmbH Ennigerloh TypePharma Hubsaul HS-200 Ex No.280 Year of construction1987 Main Features MaterialStainless steel Motor0.75 KW Height2395 mm Specified Features - Lifting/tilting machine MaterialStainless steel Lifting machineStationary lifting column (1x) Max. weight210 KG Lifting height2395mm (outlet height) Hydraulic drivecheck With hydraulic unitcheck Motor0,75 KW Information With switchWith 2x Pharma container type PC-250 Floorspace1,8x0,8 M Total height3,5 M Extra Specifications- 2x container dia. 700x400mm, Conical bottom 530mm, Outlet dia. 200mm Lifting/tilting machinesL.b. BohleConveying systems > Lifting/tilting machinesBrand > L.b. Bohle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are  ...

General SKU349T951 LocationBarneveld No.61.006 Year of construction1984 Main Features MaterialStainless steel Volume2000 Ltr. Motor5.5 KW Specified Features - Tumbler mixer Tumbler mixercheck Double cone tumbler mixercheck Capacity2000 Ltr. (± 1300 Ltr. net) Inlet50 mm (conus inlet dia. 100mm) With motor5,5 kW 220-242/380-420 Volt With brake motorcheck MaterialStainless steel 1.4301 (304) Information Mounted on mild steel framecheck With switchgearcheck(as is) Floorspace2x2,5 m CEcheck Total height4,05 m Weight3500 kg Extra Specificationsis supplied with control components (as is) Tumbler mixersServoliftMixers > Tumbler mixersBrand > Servolift What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Nether ...

General SKU397M493 LocationBarneveld MakePentavac srl TypePENTA 2100 No.820 Year of construction2001 Specified Features - Transwrap machine Transwrap machineSealer and filler Contact parts stainless steelcheck With dosingcheck MakeOMAS Technoistemi TypeDEL 1 No.0107011 Year of construction2001 Contact parts stainless steelcheck Information Mounted on framecheck With switchgearcheck Floorspace1,5x1,2 M Total height2,1 M Weight500 KGTranswrap machinesPentavacPackaging machines > Transwrap machinesBrand > Pentavac What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU304M417 LocationBarneveld MakeNIRO A/S TypeCSS ZIG-ZAG 300mm No.080-0101-00 Year of construction1995 Main Features Motor1.35 KW Specified Features - Tumbler mixer Zig-Zag tumbler mixercheck Inlet300 X 185mm OutletDia. 240mm With motor1,35 KW, 400/690 Volt (Ex) Speed mixer26 Rpm With safety gatescheck Information Floorspace2,4 x 1,2 M Total height1,6 M Weight920 KG ATEX compatiblecheckTumbler mixersGEA NiroMixers > Tumbler mixersBrand > GEA Niro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU304M416 LocationBarneveld MakeNIRO A/S TypeCSS ZIG-ZAG 300mm No.080-0104-00 Year of construction1996 Main Features Motor1.35 KW Specified Features - Tumbler mixer MaterialStainless steel Zig-Zag tumbler mixercheck InletDia. 160mm / 300 x 185mm OutletDia. 195mm With motorcheck With safety gatescheck Information Floorspace2,4 x 1,2 M Total height1,6 KG Weight860 KGTumbler mixersGEA NiroMixers > Tumbler mixersBrand > GEA Niro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU300U1003 LocationBarneveld MakeCI Electronics Type195/36 Sade P2 No.TP595 Main Features MaterialStainless steel Specified Features - Miscellaneous transport MaterialStainless steel Information Floorspace0,80x0,65 m CEcheck Total height1,37 m Weight70 kg Extra SpecificationsTablet/capsule weight sorter, capacity: 5-2000 milligrams, processing 55 tablets/capsules per minute.Miscellaneous transportCI ElectronicsConveying systems > Miscellaneous transportBrand > CI Electronics What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU236T269 LocationBarneveld MakeBohle TypeHS600 No.1020957001 Year of construction2011 Main Features MaterialStainless steel Motor0.55 KW Height3400 mm Specified Features - Lifting/tilting machine MaterialStainless steel Lifting machinecheck Max. weight600 kg Lifting height3400 mm Mechanical drivecheck Motor0,55 kW Information Total height3,2 m Weight650 kg CEcheck Floorspace0,8x0,7 mLifting/tilting machinesBohleConveying systems > Lifting/tilting machinesBrand > Bohle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU430W1387 LocationBarneveld Makeservolift Year of constructionunknown Main Features MaterialStainless steel Height500 mm Specified Features - Lifting/tilting machine MaterialStainless steel 1.4306 (304L) Lifting machinecheck Lifting height500 mm Hydraulic drivecheck Information Floorspace1,2x0,8 m Total height1,5 m Extra Specificationsinlet diameter: 700mm outlet diameter: 250 mm Lifting/tilting machinesServoliftConveying systems > Lifting/tilting machinesBrand > Servolift What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU248T375 LocationBarneveld MakeBühler TypeSDVE-1300 No.10208388 Year of construction1996 Main Features Motor75 KW Width1300 mm Specified Features - Three roll mill MaterialMild steel, Stainless steel Three roll millcheck Roll diameter400 mm Roll width1300 mm Motorcheck Landert, 75 kW, 400 Volt With variable speed drive1800 rpm Hydraulic roll adjustmentcheck With hydraulic unitcheck Rolls can be cooledcheck With scrapercheck Information Total height1600 mm Weight4452 Kg Floorspace2560x1700 mmThree roll millsBühlerMills > Three roll millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKUR0328 LocationBarneveld MakeBüter Hebetechnik GmbH (D) TypeH 11-06 No.A 11 11720 Year of construction2012 Main Features MaterialMild steel Motor1.5 KW Height600 mm Specified Features - Lifting/tilting machine MaterialMild steel Lifting machinecheck Max. weight1100 Kg Lifting height0,6 M Hydraulic drivecheck With hydraulic unitcheck Motor1,5 kW 400 Volt Information Total height0,7 M Weight750 Kg Floorspace2,5x1,6 MLifting/tilting machinesBüter Hebetechnik GmbHConveying systems > Lifting/tilting machinesBrand > Büter Hebetechnik GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU394U1145 LocationBarneveld MakeServolift TypeHS No.H337-12093 Year of construction2009 Main Features MaterialStainless steel Motor2.2 KW Height2850 mm Specified Features - Lifting/tilting machine MaterialStainless steel 1.4301 (304), Stainless steel 1.4306 (304L), Stainless steel 1.4541 (321) Lifting machinecheck Max. weight1000 kg Lifting height2850 mm Hydraulic drivecheck 150 bar Pneumatic drivecheck 6 bar With hydraulic unitcheck Motor2,2 kW (500 V) Information With switchcheck Weight1650 kg CEcheck Floorspace1,5 x 3 m Total height4,3 m ATEX compatiblecheck Extra SpecificationsSwing angle 180 degree. lifting stroke 1600mm Lifting/tilting machinesServoliftConveying systems > Lifting/tilting machinesBrand > Servolift What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any ...

General SKU248T376 LocationBarneveld MakeBühler TypeSDVE-1300 No.10208386 Year of construction1996 Main Features Motor75 KW Width1300 mm Specified Features - Three roll mill MaterialMild steel, Stainless steel Three roll millcheck Roll diameter400 mm Roll width1300 mm Motorcheck Landert, 75 kW, 400 Volt Hydraulic roll adjustmentcheck With hydraulic unitcheck Rolls can be cooledcheck With scrapercheck Information Total height1600 mm Weight4452 Kg Floorspace2560x1700 mmThree roll millsBühlerMills > Three roll millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU319M527 LocationBarneveld MakeLehmann TypeWD-13 No.09442 Year of construction1990 Main Features Motor55 KW Inlet diameter400 mm Width1300 mm Specified Features - Three roll mill MaterialMild steel Three roll millcheck Roll diameter400mm Roll width1300mm Rolls placed inclinedcheck Motor+/- 55KW Hydraulic roll adjustmentcheck Rolls can be cooledcheck With inlet hoppercheck With scrapercheck Information Floorspace2,7x1,7 M Total height1,8 M Weight5900 KGThree roll millsLehmannMills > Three roll millsBrand > Lehmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!