m e used for sale

electric motor, three-phase motor -Manufacturer: MEZ, Electric motor type AP132M-4 -Power: 7.5 kW -Speed: 1450 rpm -Shaft: Ø 38 x 80 mm -Bolt circle diameter: 265 mm -Recess Ø: 230 mm -Flange outer Ø: 300 mm -Design: B5 Protection rating: IP44 -Dimensions: 520/360/H298 mm -Weight: 83 kg

Electric motor, three-phase motor for gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer: Demag, crane motor unfortunately without type designation -Power: kW -Speed: 1485 rpm -Shaft: Ø 24 x025 mm -Design: B14 -Dimensions: 370/180/H250 mm -Weight 19.8 kg

End-side driver, end-side driver, end-side driver, driver tip, end-side driver, end-side driver -Manufacturer: Lenze ABW, end face drive (2 pieces) -Type: RD4 / MS4 -Forehead dimension: Ø 40 mm / Ø 45 mm -Recording: MK4 -Price/Fee: complete -Transport dimensions: 173/112/H60 mm -Total weight: 2.4 kg

Year of construction: 2016 CNC controller: FANUC Professional 5 Axes X-axis travel mm: 550 Y-axis travel mm: 1000 Z-axis travel mm: 500 C-axis degrees: 360 (continuous rotation) / rotary encoder A-axis degrees: 150 (+30 120º) rotary encoder Feed rates m/min: X:32; Y,Z:40 Rapid traverse m/min: X,A,C:48; Y,Y:50; A,C:18 Worktable Table dimensions mm: 500 Maximum workpiece size (D x H) mm: 650x500 Max. workpiece weight kg: 350 Spindle Spindle speed rpm: 14000 Tool system Tool holder: HSK-A63 Tool magazine slots: 323 Tool changer: Pinza doble Max. Tool Diameter 70 With occupied neighboring places mm: 140 Max. Tool Length mm: 300 Max tool weight kg: 8 Equipment Electronic Handwheel Chip conveyor Measuring probe Machine running times Under power: 63813h Spindle Working: 30592h Basic machine dimensions / weight Length mm: 3550 Width mm: 2900 Height mm: 3200  ...

Caterpillar C2.2 - Unused - 20 kW - JAW

Screw ø 75-36D; approx. 600 kg/h A.C. Engine 182.0 kW

Main extruder : KME 1-90-36R, main drive 255 kW Co Extruder Inner Layer : KME 45-30 Co Extruder Outer Layer: KME 45-36BR, New Screw Condition : good, straight from production. Compact design, 1 common control cabinet Note : 3-layer pipe head up to 315 mm available

Main extruder : KME 1-90-36R, main drive 255 kW Co Extruder Inner Layer : KME 45-30 Co Extruder Outer Layer: KME 45-36BR, New Screw Condition : good, straight from production. Compact design, 1 common control cabinet Note : 3-layer pipe head up to 315 mm available

Bake Miwe Condo. Year of manufacture 2013.

The Tetra Pak MultiShrink 62 is an industrial shrink wrapping machine used in filling and packaging lines for beverages and liquid foods. Multipack formation (e.g. 3×1, 4×3 arrangements) Film packaging + shrinking for stable containers In-line operation in automatic production lines High speed for large production quantities Beverage industry (milk, juice, plant-based drinks) Formation of transport and sales packaging Stabilization of products for storage and shipping

This 5-axis Mitsubishi MV4800 was manufactured in 2018. It features an X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 510 mm, making it suitable for precision cutting of conductive materials. The machine includes a water-based dielectric system and automatic wire threading. If you are looking to get high-quality wire erosion cutting capabilities, consider the Mitsubishi MV4800 wire EDM machine we have for sale. Contact us for further details.

Ethos X Microwave Extraction -Currency: MYR PIC: - Ms. Fatimah (013 628 7197/ fatimah_asmadtopglove.com.my) - Ms, Farha ( 01111936236/ nurfarha_atopglove.com.my)

Joining unit: Yes; Edge thickness: maximum 3mm; Workpiece thickness: 8mm - 50mm; Workpiece width: min.110mm; Glue basins: granules, quick-change basins; Cross-cut scissors: yes; Caps / flush sawing: yes ; Milling Station: Bevel / Radius; Flat - Scraper: Yes; Radius Scraper: Yes; Infeed ruler adjustment: manual; Workpiece thickness adjustment: manual; Power consumption: 5 kW; Machine length: 3314 mm; Machine width: 1085 mm; Weight: 623 kg;

Pre-milling unit: yes; Pre-milling unit material removal: 0 - 2 mm; plastic edges: 0,4 - 3 mm; solid wood edges: 0,5 - 5 mm; Workpiece thickness: 8 - 50 mm; Minimum length of workpiece: 120 mm; Min. work piece width: 110 mm; Anti-adhesive spraying unit: yes; Edge preheating device: yes / with ceramic infrared lamp; Bonding unit: granulat / Glue container quick-change kit; Jack knife: yes; Flush trimming unit: yes; Corner copy unit: yes; Flush radius milling unit: yes; Radius scraper unit: yes; Area scraper unit: yes; Buffing unit: yes; Cleaning spray unit: yes; motor power: 5 kW; machine length: 3774mm; machine width: 1546 mm; machine height: 1337mm; weight: 842 kg; Top equipment for high productivity with low space requirements! Intuitive operation with the eye-S control and 10 large touchscreen: - HMI Maestro Active Edge - Graphic display of all processing units ...

This 5-axis Makino U6 HEAT was manufactured in 2016. It features an impressive X-axis travel of 650 mm, Y-axis travel of 450 mm, and Z-axis travel of 420 mm. The machine has a maximum workpiece size of 1,000 x 800 x 400 mm and can handle a maximum workpiece weight of 1,500 kg. If you are looking to get high-quality wire EDM capabilities, consider the Makino U6 HEAT wire EDM machine we have for sale. Contact us for further details.

A custom-built Schuster groove machining machine is available. Components: separation magazine, centering unit, end machining insertion end, round groove milling unit, 90° turning unit, trapezoidal groove milling unit, groove deburring unit, sawing unit, end machining shaft, insertion end deburring unit, inspection and carrying unit and embossing unit. Overall system dimensions X/Y/Z: approx. 8000mm/2400mm/2500mm, weight: approx. 13000kg. The electronics were overhauled in 2015. Including coolant tank and chip conveyor. Documentation available. An on-site inspection is possible.

For sale: JCB 8030 ZTS (built in 2017) Powerful and reliable mini excavator in very good condition! Engine power: 15.28 HP / 20.9 kW Operating hours: only 1190 hours Weight: 3217 kg Automatic / hydraulic quick coupler Additional hydraulics for hammer/shears Rubber tracks Battery Disconnect Switch Joystick control for precise work Includes standard backhoe bucket and ditch/bulldozer bucket Air conditioning for comfortable working

4-cylinder engine Displacement: 1,123 cc Power: 15.5 kW / 21 hp Weight: 2,665 kg Air conditioning Rubber tracks Dozer blade Hydraulic/automatic quick coupler Hydraulic circuit for hammer and shears Scissor hydraulics available Original paint Accelerator pedals installed Additional front and rear work lights Orange & green beacon Hammer lines available

Hours: 866 h Power: 16 kW / 21 hp Displacement: 1,100 cc Weight: 2,000 kg Air conditioning Joystick control LCD display Tilt-Up Cab Stage V engine (Stage 5) Hydraulically adjustable chassis Dozer blade Full functionality Despised Hydraulic Quick Coupler (CW-05) Ditch cleaning bucket 2x Backhoe bucket CE certified

miho fill level detector for detecting underfilled or overfilled bottles, as well as for cap detection. The device works with a high-frequency alternating voltage., Additional title: Fill level inspection system, Capacity: 24000 b/h, Operation / Control: at control box, Material: Painted steel / stainless steel, Position: free-standing / mounted on bottle transport, Base construction: Housing with evaluation electronics with tubular frame on spherical feet, Features: Measuring device, control electronics, bottle ejector

G. Mondini S.p.a. traysealer, model: EVO390-XL, number: 3761/09, year of construction: 10/2009, 415 V, 3 Ph, 50 Hz, infeed chain with dividers, divider height: 20 mm, distance between dividers: 190 mm, plastic belts, belt width: 280 mm, total dimensions: 11900 mm x 1300 mm x 2450 mm. S/s trolley to change dyes, model: CPS/R, number: 3761/09, year of construction: 10/2009, dye: (6x) 202 mm x 153 mm, total dimensions 1650 mm x 900 mm x 1550 mm. Including 3 pallets with dyes, dye: (5x) 255 mm x 161 mm, (5x) 232 mm x 182 mm, (7x) 180 mm x 128 mm. S/s frame for 3 dye sets model: CP/S-3+3, number: 3762/09, year of construction: 10/2009, dimensions: 4200 mm x 750 mm x 1860 mm.

x-travel:650 mm y-travel:450 mm z-travel:420 mm control:MAKINO Hyper i U-axis:± 75 mm V-axis:± 75 mm max. size of workpiece LxWxH:1000 x 800 x 400 mm workpiece weight:max. 1500 kg Table dimensions:910 x 710 mm weight of the machine ca.:5 t Dimensions (L/W/H):3 x 3 x 2,3 mm Memory:10 GB Wire EDM in good condition.

table length:920 mm table width:600 mm ampere:13,2 A weight of the machine ca.:6 t dimensions of the machine ca.:2,46 x 2,24 x 2,33 m X-axis:600 mm y-axis:400 mm Z-axis:260 mm max. table load:1500 kg The dimensions for transport are: wide 2240 mm x high 2330 mm x deep 2460 mm weight approx. 6000 kg.

A Mitsubishi CNC wire EDM machine including cooling unit is available. Workpiece dimensions X/Y/Z: 1050mm/800mm/295mm, max. workpiece weight: 800kg, table dimensions X/Y: 780mm/630mm, travel X/Y/Z: 500mm/350mm/300mm, max. table feed rate: 1300mm/min, wire diameter range: 0.2mm-0.3mm, max. wire feed rate: 250mm/s, wire tension range: 2N-25N, tank volume: 635l. Machine dimensions X/Y/Z: approx. 1850mm/2350mm/2050mm, weight: approx. 2550kg. Documentation available. An on-site inspection is possible.

8-color format: 70 x 100 cm<br><br><br><><<br>Verf Gbar: Instant

4 + 4 bags Sniffer Output Available: Immediately

Main product investors Product accelerator Suction opening station 2 Product supplement investors End element with discharge Dashboard Band display 1 compressed air/vacuum pump Still in operation: No Available: immediately

Type: MST. Strapping machine with 6 new replacement strap coils, 0,9 kW.

8-30 mm Still in operation: Yes Available: immediately

Main product investors 12 Product supplement Investors Scan Still in operation: No Available: immediately

Main product investors Suction opening station 1 Tandem product insert stations 2 Product supplement investors 1 Tandem product insert stations Accessories: Still in operation: No Available: immediately

<br>SOS block bottom bag machine TRIUMPH III, Windm Ller + H Lscher, with lower patch unit, 2-ply, photocell, several former plates and aisle, option: 4-color printer for final cleaning<br><br>br>

Technical data: Machine stand, Type 539 Band saw roll diameter 1400 mm Band saw roll width 180 mm Saw blade width max. 200 mm Saw blade length max. 9300 mm Saw blade thickness 1.3 mm Saw blade speed approx. 42 m/sec. Drive power 45 kW, (1500rpm) Cutting feed requires. 22.5 m/min -Incl. electrical equipment, consisting of limit switches for saw blade voltage, path limitation for transverse movement -2 electromechanical width adjustment devices with precision spindle and two-stage special drive - designed for connecting a Fraba digitizer 2800 -2 hydro-pneumatic band saw roller brakes

Make Wafios / MRP / Vitari Various machines available! Diameter areas 2 - 45 mm

Makes: Hilgeland / EW Menn / Ingramatic Diameter ranges 1mm - 20mm

M18L - 1 Screw Head Slitting Machine (used) without vibrating conveyor Make: MENN - Type: KS8 and KS5 Diameter range 1.7-10 mm Shank length under head 3-105 mm Power Piece/Min 27-1.850 Weight 800 kg Engine power 1.5 kW

CAP.: 10 000 L/H

Small blasting machine for cryogenic deburring - MEWO 42

full line for mesh up to 6 m

WESTFALIA MZA 10 dynamischer Inlinemixer, Kapazität abhängig vom Produkt.

Metal press RMH MB (Mini Baler) This machine is particularly suitable for pressing aluminium, copper, zinc and other metals. The RMH MB Mini Baler is able to crush and then press larger material made of aluminium, copper, zinc and other metals thanks to lateral knives on three sides of the filling box. Technical data: Drive: 7.5 Kw / 400 V Weight: 1.8 T Shear lid pressure: 20 t Ground ram pressure: 40 t Working pressure: 220 BAR Filling box dimensions (L x W x D): 81.5 cm x 35 cm x 51 cm Package dimensions (L x W x material quantity): 35 cm x 20 cm x variable length (material quantity) Pressing cycle: about 1 minute Dimensions (L x W x H): 2.45 meters x 1.20 meters x 1.40 meters CE Norm Metal Baler RMH MB (mini baler) Cutting edges on three sides of the bale box and lid give this machine the ability to handle with oversized materials out of aluminium, copper,  ...

Tip height 120 mm, grinding length 1000 mm, 8 spindle speeds 55 - 600 rpm, spindle head holder MK 3, table sash. infinitely adjustable, table swivel 7 each, delivery by hand or automatically, grinding wheel-dm. max 400 mm, Grinding wheel width approx. 60 mm, tailstock holder MK 2, connection value approx. 3.5 kW, automatic working cycle, express speed 30 mm, automatic. Piercing loops. The machine is functional and does not require a geometric revision. Accessories on request!

Water-cooled grinding spindle motor for JUNKER Quickpiont 13.5 kW ,380/660 V ,25/14.5 A ,2940 rpm ,50 HZ

Technical data: Make: Moehringer Width: 1600 mm Length: 6000 mm - with pneumatic belt repeller Pictures and further information on request

New plastic handles for drawers, tool cabinets, etc. 380 pieces. Partially original packaged. Price reduced VS €/piece

Measuring scraper 150 mm, still original welded in plastic foil with artificial leather case, with mm and inch - pitch, Steinless - Hardened, with thread table on the back for Metr.- ISO and Whitworth. Smaller batches can also be dispensed. 5.00 €/piece, stock approx. 25 pieces

Technical data: Fruit wash, grind, pressing then the juice pasteurization and bag-in-box packaging pour performance up to 750 L/h incl. mounted hydraulic large box emptying wash grinding plant Kreuzmayr KWEM 1000 cover press Kreuzmayr KEB 500 Pasteur Kreuzmayr PA 750 oil bag-in-box fillers Kreuzmayr CBF 900, incl. 6-digit series bottling juice pump, strainer, 2 PCs. juice buffer tank 220 litre stainless steel base frame, Tandem chassis with tyres 195/50-10 plan building with gas spring lift for the two side walls, roll-over tarp back 4 PCs. crank rotating supports for the horizontal alignment of the System cleaner, air compressor and complete piping fix established

NEW Bainite model BMIM95 95 litre intermeshing type mixer Customs Tariff CN Code: 8477.8093 Manufacturer: Bainite Machines Pvt Ltd Net chamber volume: 95 litre Rotor speed: 6 - 60 rpm Rotor type: HP-5 design (intermeshing) Dust seals: SSA (self-sealing arrangement) Motor power: 420kW, 1000rpm AC motor, 3ph, 50Hz, 380/400V Discharge door: Hydraulic drop door with linear actuator and toggle latch. Two (2) J Type thermocouples mounted in door top as standard One (1) Single acting pneumatically operated oil injector Feed Hopper Assembly: Hydraulically operated Floating weight: single ?V? bottom type Gearbox: Full unidrive type with S.F. 2.25 Bedplate: Fabricated steel Ancillaries: Dust stop lubrication (1.5HP x 2), hydraulic pump unit (20HP) Three (3) Zone closed loop temperature control (TCU) Electrical Controls: Schneider make variable frequency drive (VFD) controls with ...