m e used for sale

Mixer, hammer mill, crusher, glass crusher, used Manufacturer: EHINGER IMPIANTI Type: MUD 89 Year of construction: 2003 Engine SIEMENS 45 kW 1475 rpm 400/690 V Reduction with V-belt approx. 4,3:1 Total dimensions: approx. 2800 x 1700 x 2000 mm The mill was planned for the simultaneous grinding and separation of materials with different grinders e.B fragile and tough fractions. It was part of a glass recycling plant in which foam glass gravel was produced. We sell the complete plant with belt ovens, cup plants, silos, crushers and mills.

Working widths: 2000 mm roll surface width: 2200 mm Fabric content: 48 Meter 0: 160 mm Roller covering: ALU Clouth speed: 20 - 200 m/min Cloth tension: 20 - 500 N voltage: 400 V / 50 Hz output: kw weight: t dimensions of the machine ca.: m cloth accumulator: 48 meters capacity Number of rolls: 15-axis guide rolls, Ø 160 mm made of aluminum type of material: double polyamide foil hose material thickness: 2 x 15 my to 2 x 50 my movable roller mill is moved up and down with 4 ball screws unit was disassembled after test run for transport The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: R10-R260 : 210 ° bending speed: 2 U/min : 1 1/4 x 3,5 mm : einphasig - 230 V drive motor: 1,1 kW : < 70 dB weight of the machine ca.: 80 kg dimensions of the machine ca.: 410 x 1000 x 570 mm Accessories / equipment: Hard copper and aluminum: 54x2 mm Steel tube: 42x3 mm Stainless steel: 42x2.5 mm Solid material: 30 mm Number of programs: 30 each 9 bends Control: Soft-touch control panel in 8 different languages Mobile by driving device The controller allows easy programming of the automatic cycle The controller is equipped with a system diagnostics and has a great language selection. Patented fast tool change system A single bending speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Folding machine Shoei Model Mach Eight Year 1995 Serial 7092 Size Min: 150 x 210 mm / Max: 470 x 640 mm Feeder suction wheel + stream feeder Folding configuration 2 plate buckles + 1 knife Delivery detachable belt delivery Details Vacuum pump, noise hood, electronic speed control, sheets separations head Condition Rollers, belts, vacuum roller are all good Available direct

Concrete spraying machine Manufacturer Montanbüro Type e.B. Elefantion Unused! Other unused and used concrete spraying machines in stock Also water pumps with e.B. Centrifugal pump Flow rate 150m³ at head 750m! If you are interested, please ask! Other machines: 216 TIG welding machine Dalex TGKW 352 AC/DC 217 Dalex LDE 400 inert gas welder 218 Welding fume extraction Dalex 64111 222 items of rotary/butterfly valves 228 items filter mats for building material plants 229 items Control cabinets 230 3 items submersible pumps 231 2 submersible pumps DV80ABS 233 Centrifugal pump LHK 125x10 SE G150 234 compressed air predatory winches pulling force 10to 235 Concrete spraying machine Aliva 237 Concrete spraying machine Aliva 238 11 centrifugal pumps 240 2 high pressure pumps TP 300/42/48 213KP pneumatic 241 4 lifting/trasn sport beams pneumatic, 2x30/40 kN, witho ...

Machine Details Warehouse number 1105-03727 Machine Type Machining Center - Vertical Make YANG EAGLE Type MCV 1000 Year of construction 1998 Control type CNC Control Fanuc O-MD Storage location FRANCE Country of origin Taiwan Delivery time immediately Freight base EX WORK Technical details x-travel 1015 mm y-travel 500 mm z-travel 500 mm Control Fanuc O-MD Clamping surface table 1070x500 mm Table load - central/maximum approx. 250 kg Tool holder BT 40 Spindle speed: 24...6000 rpm Operating hours 5617 h Tool magazine with 20 seats/places Total power requirement 12 kW Information Equipment: CNC FANUC OMD -Cooling device BT 40 Copy of user manual available! Machine can be demonstrated! I.d..

FERROMATIK MILACRON ELEKTRA 155 injection moulding machine manufactured in 2003 in Germany after a general overhaul at a total value of approximately 14290 EUR. During the 2024 overhaul, components such as the clamping system drive screw, belt pulley, drive belt, lubrication system sensor, clamping pins, pan and drive belts in the plasticising unit were replaced. In addition, both motors in the plastification unit were refurbished and a periodic column tension check was carried out with the GEFRAN strain gauge system. The FERROMATIK MILACRON EE155 injection moulding machine is the perfect choice for the mass production of plastic parts of different colours, shapes and sizes by injection moulding. The machine’s high-performance components significantly enhance any, even the most intensive, machining process. These include an electric drive, which, compared to a hydraulic drive, offer ...

Eillert Salad spinner Model: MSD-500-V Serial: 188 2008, Stainless salad spinner, with three baskets, 1.5Kw, 3Ph

Touchline CF375 performs creasing and folding work in a single operation. The system has a simple control panel, a reliable Stacking feeder with suction belt system and a unique creasing and folding tool. Important: The transport rollers must be replaced.

Spiral kneader for 80 kg dough Dust cover stainless steel 2 drives (shell and dough hook separated) Mobile on wheels/ Weight 390 kg Exhibition machine therefore special price

used spiral kneader Eberhardt Maximat MAAN 160 extendable, completely overhauled, 160 kg dough, 2 watches, with 2 stainless steel boilers, stainless steel spiral, many new parts, new friction wheel, new lifting cylinder, electrics renewed, 380/400 V, 3 phases, 50 Hz, 19.5 A, spiral 7.8 kW, boiler 0.75 kW

: R10-R260 bending speed: 2,5 U/min : 42x3 mm : 42x2,5 mm : 30 mm : 54x2 mm total power requirement: 1,5 kW weight of the machine ca.: 80 kg dimensions of the machine ca.: 410x1000x570 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6435 Type: MTX Flex 6 Producer: Euromac Generated: 2014 Parameters: Software: RADAN Operating hours: 19932 h Switch-on hours: 12452 h Compressive force: 30 t Machine height: 1900 mm Machine length: 4840 mm Machine width: 3630 mm Equipment: Multitool Flaps

Refer to code 1027 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1033 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

MEMBRANE SKINNER, MAJA, MODEL: EVM 2000 Technical description: Serial number: 38280 Power supply: 380 V, 3 Ph, 50 Hz, 2.2 A, 0.75 kW Working widht: 420 mm Dimensions: 700 X 700 X 1000 mm

GEBR, FÜR WEITERE INFORMATIONEN KONTAKTIEREN SIE MICH BITTE.

Key data: 400 mm, 400 mm, 375 mm

Machine Details Stock-No. 1105-03922 Type of machine Machining Center - Universal Make DMG DECKEL MAHO Type DMU 40 EVO Year of manufacture 2013 Type of control CNC Storage location HAGUENAU Country of origin Germany Delivery time to be agreed Freight basis ex site Price Technical details X-Travel 400 mm Y-Travel 400 mm Z-Travel 375 mm control iTNC 530 Heidenhain Turning speed range - Main spindle max. 20,000 min/-1 power capacity - main spindle 19 kW max. torque 130 Nm tool taper SK 40 swivellable -105+ 40 ° table surface area Ø 450 mm T-slots 7x 14 x 63 mm max. table load approx. 275 kg rotatable C: 360° Max. workpiece diameter 500 mm max. workpiece height 400 mm number of toolpositions 60 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8.0 kg Change-time chip to chip a ...

Specifications: SEW Movigear Drive Motors/ Motor Quantity: 11 pieces available Manufacturer: SEW Eurodrive Condition: good (used) Power: 50Hz/

Specifications Ø tubes / radius in mm: Ø 22 / 67 Ø tubes / radius in mm: Ø 10 / 36

new spiral mixer Masz SMR 180 extendable, year of construction 2023, 120 kg dough, 2 clocks, stainless steel spiral, with 1 stainless steel kettle, if necessary with 1 additional kettle for an additional 3,800€, Fabr.-No. 121323, boiler diameter 75 cm, 6.8 kW, 50 Hz, 400 V, external dimensions 149 x 87 x 128 cm, weight: 549 or 726 kg

Skinning machine Maja Type: ESB 3441 Power: 1.1 kW Voltage: 380 V Dimensions: 70x114x95cm Delivery time: 10 working days after advanced payment

MEMBRANE SKINNER, MAJA, TYPE: EVM 3006 Technical description: Serial number: 42728 Power: 0,75 Kw, 380 V, 50 Hz Working widht: 545 mm Dimensions: 1000 x 600 x 1050 mm This machine has only been designed for use in the meat processing industry. The EVM 3006 type is a membrane skinning machine used to open and manually remove the membrane and skin from pieces of fish, pork, beef, poultry, veal, game and horse. Only round and flat products may be processed on open membrane skinning machines (e.g. knuckle joints or thighs)

B&A REF: 9023 TON: 80 SHOT WEIGHT: 140 SCREW DIAMETER: 35MM STROKE VOLUME: 183CM3 INJECTION PRESSURE: 2429AR PLATEN SIZES: 560 X 510MM DBTB: 420 X 370MM MIN MOULD HEIGHT: 150MM MAX MOULD HEIGHT: 400MM MOULD OPENING STROKE: 350MM MAX DAYLIGHT: 750MM EJECTOR STROKE: 150MM CONTROLS: MC 6 CORE PULLING: 2 AIR VALVES: 2 HEATING CAPACITY: 14.2W ROBOT INTERFACE: EUROMAO 67 ROBOT: GEIGER TECNOMATIC SCREW DRIVE: ELECTRIC HOT RUNNER: 12 ZONES

Model: Major manu EVO Circuit breaker sensor rod Run out of the dough pieces on integr. Plate Performance characteristics up to 1500 pcs./h Weight of dough pieces Min - Max. 80 to 1000 g Connection 400V, 0.55 kW, 16A-CEE plug Dimensions: 1010 x 800 x 690 mm W x D x H Input height / output height 1350/ 880 mm (frame) Net weight 132 kg New machine 12 Months Warranty + Service Package Many more TOP bakery machines in stock!

DMG MORI SEIKI DMC 635 V Ecoline CNC machining center was built in 2013. The machine, designed for precision machining of workpieces, is distinguished by its extremely stable construction made of high-quality cast iron, which perfectly dampens any vibrations and oscillations. To achieve the highest precision and accuracy, reliable components in the form of cutting tools and a high-speed spindle are used in the machining process. Tools are changed in a very short time, so that the overall milling time is significantly reduced. The DMG DMC 635 V ECO CNC vertical machining center is offered with a modern touchscreen control panel and integrated chip conveyor. To this date, the machine has only worked for 9069 hours. The DMC 635 V ECOLINE milling center weighs 3900 kg. Technical specifications of the CNC milling machine DMC 635 V ECO - number of axes: 3 (X,Y,Z) - feed in the X/Y/Z ax ...

Key data: 800 mm, 650 mm, 550 mm

Machine Details Stock-No. 1105-04022 Type of machine Machining Center - Universal Make DMG LID MAHO Type DMU 80 eVolution LINEAR Year of manufacture 2012 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time to be agreed Freight basis ex site Price Technical details X-Travel 800 mm Y-Travel 650 mm Z-Travel 550 mm control iTNC 530 Heidenhain distance spindle nose and table 150 - 700 mm Turning Speed Range - Main Spindle max. 18,000 min/-1 Power capacity - main spindle 35 / 25 kW max. torque 130 Nm tool taper HSK table surface area 800 x 700 mm max. table load 600 kg rotatable C: 360° Swivel range B: -5 / -110 ° number of toolpositions 120 pos. tool taper HSK 63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8.0 kg Change-time chip-to-chip approx. 5.9 sec F ...

Machine Type: Door Belt Drilling Machine Manufacturer: Pressta Eisele Type: Multyfor M Year of Make: 1996 Condition: used and functional / main switch toggle defective / coolant bottle missing. Offer will only be sent if a complete imprint is provided! Price 1.250 Euro incl 19% VAT Vb Location Warstein , Germany Reference M-PRE-0724 DESCRIPTION We offer you a used multi-spindle drilling machine from the manufacturer Pressta Eisele. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

Key data: 750 kN, 40 mm

Engel - Injection Molding Machine e - Max - 310/75 ( No.:1 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 40 – diameter - Actual shot value: 40,069,660 pcs. - Operating hours: 105,347 h – In automatic: 63,211 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany

Key data: 750 kN, 35 mm

Engel - Injection moulding machine e - Max - 310/75 ( No.:2 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 34,527,644 pcs. - Operating hours: 98,349 h – In automatic: 54612 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany

Key data: 750 kN, 35 mm

Engel - Injection moulding machine e - Max - 310/75 ( No.:3 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 41,658,321 pcs. - Operating hours: 103,302 h – In automatic: 65,611 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany

Key data: 750 kN, 35 mm

Engel - Injection moulding machine e - Max - 310/75 ( No.:4 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 42,349,940 pcs. - Operating hours: 100,778 h – In automatic: 67,929 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany

turning diameter: 250 mm turning length: mm control: Siemens 840D 0 total power requirement: 25 KVA kW weight of the machine ca.: 4 t required space: 5.5 x 2.5 x 2.5 m m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 750 mm, 600 mm, 520 mm

Machine Details Stock-No. 1105-04037 Type of machine Universal Milling Machine Make LID MAHO DMG Type DMU 70eVolution Year of manufacture 2002 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time according to the arrangement Freight basis ex Works Price 45000 EUROS Technical details X-Travel 750 mm Y-Travel 600 mm Z-Travel 520 mm Control HEIDENHAIN iTNC 530 Additional information Milling Machine - Universal DECKEL MAHO DMG DMU 70eVolution NC swiveling rotary table (700x500) Spindle -------------------- Spindle speed: 18,000rpm Tool holder: SK40 Tool Changer -------------------- Magazine places: 32 Pick up domestic equipments -------------------- sample Chip Conveyor 2nd processor card electronic handwheel HR410 INTERFACE FOR EROWA WITH EROWA ROBOTS RENISHAW SAMPLE Flushing gun

Key data: 750 mm, 600525 mm

Machine Details Stock-No. 1105-04039 Type of machine Machining Center - Universal Make DMG Type DMU 70 EVOLUTION LINEAR Year of manufacture 2008 Type of control CNC Storage location FRANCE Country of origin GERMANY Delivery time IMMEDIATELY Freight basis EX WORKS Technical details X-Travel 750 mm Y-Travel 600 mm Z-Travel 520 mm revolutions per minute 18000 rpm spindle taper ISO SK 40 control HEINDENHAIN ITNC 530 chip conveyor YES kW total power requirement 50 kW weight of the machine approx. 11 t Additional information VERY NICE MACHINE COOLING TRONG THE SPINDEL 40 BAR HP CHIP CONVOYER HSK 63 MAGASIN 120 TOOLS CTXS TROUGHT THE SPINDLE 40 BARS

2014 EUROMAC MTX Punching machine Type: MTX Manufacturer: Euromac Year: 2014 Pressing force 300 kN (30 t) Tools A, B, C, D Number of stations in the turret 6 (size D) Number of rotary stations 3 Max. number of tools 60of which rotary ones - continuously 360° 30 Maximum punch diameter (size D) – separate 81 mm The maximum diameter of the punch in the magazine XMTE4M 4 x 31.7 mm The maximum diameter of the punch in the magazine XMTE6M 6 x 24.0 mm The maximum diameter of the punch in the magazine XMTE10M 2 x 24, 8 x 12.7 mm Working range in the Y axis (with Multitool) 1300 mm Working range in the Y axis (single tool) 1250 mm Working range in the X axis (with Multitool) 2550 mm Numerically controlled stroke depth 0.1 – 31 mm Automatic repositioning of clamps in the X axis up to 10,000 mm Max. positioning speed in the Y+X axis 80 m/min. Axis acceleration 10 m/sec² N ...

1967 Maschinenfabrik Gustav Eirich DZ 2 Compulsory mixer 1500 L Manufacturer: Maschinenfabrik Gustav Eirich Type: DZ 2 Baujahr (Year of Manufacture): 1967 1973 Maschinenfabrik Gustav Eirich Compulsory mixer 2500 L Year of Manufacture: 1973 Weight: 4500kg There is a material elevator available for each one. Find more here - / Contact us at -

Type of Machine: Bar Machining Center Condition: Used Year of Manufacture: 2008 Power Supply: 3-Phase, 400 V, 50/60 Hz Current: 24 A Compressed Air Requirement: 6 bar Processing Speed: 21,000 1/min (RPM) Find more here - / Contact us at -

Inv. Num. : 8179 Type: AUTHOR X5 Evo Producer: Morbidelli Created: 2007 Parameters: Axis X: 4400 mm Axis Y: 1350 mm Axis Z: 1090 mm Weight: 5120 kg

• Conveying height 1,290 mm • Inlet height 620-780 mm • Tablet diam. 3-25 mm • Deduster path total length 15 m • Conveying capacity depending on tablet size 68,000-3,500,000 tablets/h • 2 inlet adapters: rectangular 115x80 mm and round with diam. 60 mm nozzle • Programme control C920 with HMI Allen-Bradley Panel View Plus 600 • Distributor V4000 with 6 outlets, automatic/manual change of outlets selectable via HMI • Metal check Lock Met 30+ with its own HMI • Bad ejection into glass container • PLC Allen-Bradley MicroLogix • Drive 100-240V/50/60Hz • Nozzle for dust extraction • Mobile

Refer to code 1153 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Manufacturer: Heesemann , Type: LSM 8 mit EA Entstaubung, Year: 2002, Monting of the machine: Walze/Quer/lang/lang/Lang/3 X Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 5, Sanding belt dimensions: 2620 X 1300, Steel roller: 1, Transverse sanding units: 1, Längsschleifaggregate: 4, Bürstenaggregate: 3, Band 1 Leistung kW : ca.35, Belt 1 shoe unit: yes, Band 2 Leistung kW : 17, Band 3 Leistung kW : 17, Band 4 Leistung kW : 17, Struckturieraggregat: Möglich, Vacuum table: yes, Year :2002

We are selling here a belt descaler from the manufacturer Maja, type ESB 441 in a good used and functional condition. Runs on 400 volts, bandwidth 37 cm, completely stainless steel, rollable, workshop tested, ready for immediate use, dimensions W/D/H 65/90/115 cm, others on request.

The Poultry Skinning Machine MAJA ESB 4434/1 GH is suitable for the safe automatic skinning of fresh poultry parts by infeed conveyor belt.

Technology that penetrates under the skin Increase yields with patented deep peeling Safe conveyor belt filleting High quality skinning - no post-processing Gentle processing of delicate fillets

Size: 45 x 150 mm Equipments: Double head paper driller Drill distance 45 - 150 mm Space behind drill heads 100 mm Operation Lever operated, single phase 240 Volts

Qty. 1 Second-hand shredder Mfc.: METSO Denmark A/S Model: M&J Eta PreShred 4000S Built: 2013 Condition very good Working hours: 11,347 Power supply: Voltage 400 V AC, 50 Hz Main motor: 2 X 200 kW Rated current 760 A Main motor, full load current 2 x 341 Amp., PLC controller Drive principle, hydrostatic transmission with power consumption limiter. Working cutting cassette: 2 shafts Operating asynchronously Speed: 33 rpm Number of rotary knives: 2 x 12 pieces Number of lower, fixed knives 2 x 24 pieces Bearings 2 x 2 barrel

axis stroke (X,Y,Z): unbegrenzt, 1000, 60 mm Number of spindle head vertical: 10 St. Number of spindles head horizontal: 6 St. milling motor: 4,5 kW CNC machining center at a Special PRICE! MASTERWOOD TF 100 2.0 Partnership Edition Furnishing: ----------------------------------------------------- - Drilling head with 16 drills for 5-sided machining - Grooving saw unit - Milling unit with 6-fold tool changer - incl. grooving saw blade, 2 diamond cutters, 1 WPL finishing cutter - Preparation for CLAMEX and door package - 2 foldable roller conveyors - program-controlled central lubrication ----------------------------------------------------- SPECIAL PRICE 44,990.00 euros (plus VAT) ex works ----------------------------------------------------- Freight, installation, instruction within Germany including 8-hour training individually and on site SPECIAL PRICE 3,000.00 euros (plus VAT) Partne ...

Key data: 500 mm, 450 mm, 400 mm

Brand DMG Mori Seiki Machine No: F652 Type DMU 50 Ecoline Control Siemens 840D Year of construction 2012 Table width 500 mm Table diameter 630 mm ø Table adjustable in degrees X 500 mm Y 450 mm Z 400 mm Spindle Taper SK40 Minimum speed 20 RPM Maximum speed 10,000 RPM Maximum table load 200 kg Chip transport Machine size 3,400 x 2,500 x 2,200 mm Machine weight 4,700 kg Magazine slots: 30 B-axis: +110/-5° C-axis: 360° Engine power: 13/9 Kw

Key data: 635 mm, 510 mm, 460 mm

Brand DMG Mori Seiki Machine No: F666 Type DMC 635 V Ecoline Control Siemens 840D Year of construction 2012 Table length 790 mm Table width 560 mm X 635 mm Y 510 mm Z 460 mm Spindle Taper SK40 Maximum speed 12,000 RPM Chip transport Machine size 3,400 x 2,400 x 2,800 mm Machine weight 3,950 kg Magazine slots: 30