m e used for sale

General SKU414S1011 MakeThermo Electron Corporation (USA) LocationBarneveld CEcheck TypeModel 371 Steri Cycle CO2 Incubator Main Features MaterialStainless steel Specified Features - Drying oven Climate boxcheck Capacity± 120 Ltr. Internal width450mm Internal depth490mm Internal height550mm Electric heatingcheck Number of doors:1 MaterialStainless steel Information No.305691-2222 Mach.No.305691-2222 Year of construction2006 Floorspace0,7x0,7 m Total height1,0 m Weight100 kg Extra Specificationsincluding 4 baskets 360x360x80mm including 1 stainless steel container 280x210x60mm Drying ovensThermo ElectronDryers > Drying ovensBrand > Thermo Electron What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Net ...

Converters, converters, converters, drive converters, controllers -Type: Movitron 235 -Input: 380-415V -Output -Number: 1x available -Price: per piece -Dimensions: 155/350/H175 mm -Weight: 4.6 kg

A total of 10 mobile Eckold clinching pliers, eight of them originally packaged, are available. Stroke frequency: single stroke, input pressure range: 5bar-16bar, max. operating pressure: 500bar, max. pressing force at 500bar: 30kN, max. joining part thickness: 3mm, reach horizontal/vertical: 25mm/15mm, opening dimension: 6mm, working width: 50mm, machine dimensions X/Y/Z: approx. 260mm/60mm/215mm, weight: approx. 6kg. Including pneumohydraulic pressure intensifier and tail insert. Documentation available. An on-site inspection is possible.

A single-shaft shredder Erdwich for contaminant-free red brass and brass chips is available. Cutting unit dimensions X/Y: 600mm/500mm, height: 300mm, knife width: 25mm, screen hole diameter range: 25mm-35mm, machine dimensions X/Y/Z: approx. 1600mm/650mm/800mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible.

A stencil screen printing machine Ekra is available. Frame dimensions X/Y: 800mm/570mm, print dimensions X/Y: 500mm/390mm, print speed: 110mm/s, positioning accuracy: +/-0.02mm, squeegee pressure: 320N, table adjustment X/Y: +/-8mm, max. print material thickness: 40mm, machine dimensions X/Y/Z: approx. 1300mm/1050mm/1350mm, weight: approx. 350kg. Documentation available. An on-site inspection is possible.

Pressure reducer, pressure regulator, pressure gauge -for nitrogen -Inlet pressure: max. 25 bar -Output pressure: 0-1.5 bar adjustable -Quantity: 1x Minor available -Weight: 1.3 kg

General SKU224T215 LocationBarneveld MakeErnst Möschle Pressure Working pressure jacket1.5 Bar Main Features MaterialStainless steel Volume3700 Ltr. Specified Features - Vertical tank MaterialStainless steel 1.4306 (304L) Closed vertical tankcheck Capacity3700 Ltr. Vessel sizesdia. 1400x2500 mm Dished topcheck Dished bottomcheck Manholedia. 400 mm Top connectionsDN 50 (2x) Outletdia. 38 mm With jacket106 Ltr. Max. temperature127 °C Information No.89060 1 Year of construction1989 Mounted on legscheck Floorspace1,8x1,8 m Total height2,3 m Weight900 kg Extra Specificationswith CIP-nozzles Vertical tanksErnst Möschle BehälterbauTanks > Vertical tanksBrand > Ernst Möschle Behälterbau What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ...

CNC vertical machining center Type: ecoMill 600 V Manufacturer: DMG MORI Year: 2016 Control: Siemens SLIMline X: 600 mm Y: 560 mm Z: 510 mm Max spindle speed: 12000 rpm Table: 900 x 560 mm Max table load: 600 kg Tool magazine: 30 positions Machine weight: 5000 kg Tool and work probe Filtration Bürener Preparation for mist extraction Chip conveyor New spindle in 2025 Machine in good condition, fully functional, under power Find more here - / Contact us at -

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: SEW Eurodrive, drive converter Movitrac -Type: Movitrac 31C055-503-4-00 -Power: 8.3 kVA -Input: 380-500V 50/60Hz -Output: 0-400Hz -Dimensions: 300/170/H215 mm -Weight: 5.8 kg

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Cooling water pump: with cooling water reservoir -Pump: Manufacturer Elpu Type N 120 -Power: 0.085 kW -Speed: 2800 rpm -Dimensions: 570/540/H370 mm -Weight: 24 kg

Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Hanger bolts: solar fasteners 49 pieces -Type: M10x180 -Price: per piece / minimum purchase 10 pcs. -Weight: 0.1 kg/pc.

Safety relay, safety control unit, emergency stop switch -Manufacturer: Moeller, safety relays -Type: ESR4-NV3-30 -Quantity: 1x relay available -Dimensions: 95/25/H115 mm -Weight: 0.2 kg

CNC Vertical Machining Center DECKEL MAHO DMU 50 eVo linear NEW DMG Design With track control Heidenhain iTNC 530 Year of Make: 2010 Travel: X 500 Y 450 Z 400 Speed range: 0 – 18000 rpm infinitely variable ( SK 40 ) With the following accessories: 2-Axis NC Swivel Rotary Table 500mm x 380mm Vertical tool changer with 120 magazine positions Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 IKZ 40 bar with paper belt filter Chip conveyor 3 D Probe BLUM tool measurement in the work area Signal light 4 colour DMG Automation PH 150/8 16 pallets with Allmatic + Lang vises Coolant Setup BEMA Coolant Nozzle 4 Height Adjustable Machine Shoes Operating Instructions

Safety relay, safety controller, undervoltage relay, switching device -Manufacturer: Mayser, safety relay switching device -Type: SG-EFS 132 -Number: 2x relay available -Price per piece -Dimension: 80/45/H115 mm -Weight: 0.3 kg/pc.

Frequency converter, frequency inverter, drive converter, controller, variable speed drive -Input: 3x 380..500 V~ -10% 6% 50/60 HZ -Output: 3x (0-220/240) V~ 0..180 Hz 9.5A~ 400V -Dimensions: 100/340/H270mm -Weight: 4.7kg

Control cabinet socket, Schuko socket -Manufacturer: Murr Elektronik, safety socket 16A / 250V -Type: 67950 -Number: 2x safety socket available -Price per piece -Dimension: 80/45/H70 mm -Weight: 0.1 kg/pc.

Reference : C14241 ATEX flowmeter from the brand ENDRESS HAUSER model PROLINE t-mass 65. Technical characteristics Model PROLINE T-MASS 65 Equipment Setup ATEX Documentation No documentation Status In your state Manufactured by ENDRESS+HAUSER

ATEX flowmeter from the brand ENDRESS HAUSER model PROLINE t-mass 65. Technical characteristics Model PROLINE T-MASS 65 Equipment Setup ATEX Documentation No documentation Status In your state Manufactured by ENDRESS+HAUSER

Max. saw blade diameter: 550 mm Manual swivel with digital display Motor-controlled axis for tilting the saw blade with digital display and speed adjustment via potentiometer Stepless saw blade feed Minimum quantity spraying device Weight: approx. 1,000 kg

WITH N&P UNIT (numbering & perforating) Counter: 34,552,033 Format (cm): 36x52 Dampening: conventional dampening Equipment / Additional information: with N&P (numbering & perforating) unit

Line filter, power line filter, three-phase filter, three-phase line filter, filter module, line interference filter -Manufacturer: Murr Elektronik, mains filter mains suppression filter 3-phase -Type: 10375 -Quantity: 1x filter available -Dimensions: 250/150/H65 mm -Weight: 3.4 kg

Safety switch, safety switch, protective grid switch -Manufacturer: Euchner, Safety switch from CNC milling machine Mikron UME 600 -Type: TZ2LEO24M ID No.: 090559 Technical data: see photo of the nameplate Quantity: 1 piece available -Dimensions: 170/110/40 mm -Weight: 1.1 kg

Double hose reel, reel, hydraulic hose reel, hose reel -Manufacturer: Hans H. Meyer, double hose reel from electric forklift Still EFG 1.5/5004 -Type: 7-21 -Dimensions: 280/200/H280mm -Weight: 9 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: Müco, single-phase transformer type EST 160 -Power: 160 VA -Voltage: 230V 50/60Hz -Technical data: see photo type plate -Dimensions: 100/80/H100 mm -Weight: 2.3 kg

Ref. no.: 18588 Hersteller: BATTENFELD Year of construction: 2007 Clamping unit Clamping force: 30 ton Distance between tie bars: 300 x 300 mm Mould height min.: 150 mm Mould height max.: 330 mm Opening width: 580 mm Platen size (h x v): 450 x 450 mm Injection unit Screw diameter: 18 mm Injection volume: 19 cm³ Shot weight: 17,5 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,5 x 1,1 x 1,9 m Machine weight: 2700 kg

plate thickness: 6 mm pressure: 18 t blade length: 220 mm angle adjustable from - to: 90 Grad table surface area: 1100 x 950 mm chamfer lenght: 835 mm total power requirement: kW weight of the machine ca.: 1,1 t dimensions: 1,2 x 0,8 x 1,4 m Combination machine: edging and notching - foot switch - Emergency stop switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26014 Technical data: - Automatic workflow cutting process, hydr. Lifting / lowering - of the saw frame, mitre adjustment with hydr. Clamping - Automatic material replenishment machine, mot. Mitre adjustment - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely adjustable 15 - 150 m/min - Cutting pressure regulation infinitely variable 10 - 15 bar - Lowering speed 0 - 300 m/min - Cutting range 30° - 90° - at 90° around 335 mm - Square flat 500 x 335 mm - at 45° around 330 mm - Square standing 320 x 335 mm - at 30° square standing 170 x 335 mm - Material replenishment machine - Discharge roller conveyor 4000 mm - Feed roller conveyor 4000 mm - Drive 400 V / 6.5 kW - Space requirement approx. W 2300 x H 1750 x D 2200 mm - Weight approx. 1800 kg

PLC control, electronic module, PLC control -Manufacturer: Schneider, PLC control -Type: Modicon TM241CEC24T -Input module: Modicon TM3DI8 -Dimensions: 175/90/H100 mm -Weight: 0.6 kg

PLC controller, electronic module, PLC control -Manufacturer: Schneider Electric, PLC control -Type: Modicon TM221CE24T -Number: 2x controllers available -Price: per piece -Dimensions: 110/105/H75 mm -Weight: 0.4 kg/pc.

x-travel: 600 mm y-travel: 500 mm z-travel: 500 mm total power requirement: --- kW weight of the machine ca.: 9,6 t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PLC controller, electronic module, PLC control, analog input/output module, temperature input module -Manufacturer: Schneider Electric, PLC controller Analog input/output module -Type: Modicon TM3TM3 -Quantity: 1x control unit available -Dimensions: 95/90/H30 mm -Weight: 0.1 kg

Control cabinet and distribution board construction, busbars, busbar supports, busbar adapters, OM adapters -Manufacturer: wöhner, busbar adapter -Type: EEC6080-L MCCB LUB 12 LUB 32 -Item No.: 32 427 -Number: 10x adapters available -Dimensions: 60/45/H200 mm -Weight: 0.3 kg

Position computer, computer, control unit, robot controller, controller, CNC controller, operator panel, computer monitor, screen, TFT industrial monitor -Manufacturer: BR Elektronik / Grenzebach, Computer -Type: Mini PC 8000 -Number: 1 computer available -Dimensions: 385/210/H95 mm -Weight: 4.4 kg

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuums -Connection: 220 volts -Stainless steel container (not a wet vacuum cleaner) -Power: 1400 watts -Weight: 25 kg

Power converter, current inverter, current transformer, drive inverter, controller -Perfomance: -Input: 380/415 V -Output: 460 V DC Serial No.: 05603 Price: per piece -Weight: 7.5 kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Movitrac: 204 xv -Power output: 4.8 kVA -Input: 380 - 50/60 Hz -Output: D 20 - 380 V -2 - 100 Hz -Number: 1 converter available -Weight: 13 kg

Tool cabinet -with: spare parts for toolmaking, fixture construction -Various drill bushings: different sizes -various clamping elements -Dimensions: 670/300/H2000 mm -Weight: 200 kg

x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm c-axis: 360 ° B-axis (table): -50 / + 110° mm turning speeds: 10.000 U/min spindle taper ISO: 40 DIN 69871 Control: Heidenhain TNC 620 total power requirement: 13 / 9 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 6 x 3 x 3 m Options: - 30-pocket magazine with double gripper - Production package with Internal Coolant + chip conveyor - 360 L coolant tank - Blow-off air - Coolant gun - Electronic handwheel - HEIDENHAIN TS 649 infrared probe - Direct measurement system New motor spindle in 2022 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1550 mm, 3 mm, 120 1/min

Qty. 1 Second-hand rotary shear cut-to-length line – still in operation Mfc.: PACO E.N.G Built: 2010 Still in operation! Raw Material: CR, EGI, GI, STS, AL, COLOR COATING COILS Tensile Strength Max.: 60 kg/mm2 Strip Width: 300 ~ 1,550 mm Thickness: 0.2 ~ 3.0 mm Coil Weight: 20,000 kg Sheet Length No. 1 Piler: 300 - 2,500 mm No. 2 Piler: 300 ~ 2,500 mm Piling Weight No. 1 Piler: 5,000 kg No. 2 Piler: 5,000 kg Coil ID: ∅508 mm, ∅610 mm = RUBBER SLEEVE Coil OD: ∅800 mm ~ Max. ∅2,000 mm

Rotary Lever Kneader DHM 220 with 1 tank car Boiler and kneading arm in stainless steel with flour dust hood Approx. dimensions: 810 x 1250 x 1350 mm, WxDxH Connection 400V, 16A-CEE plug Used machine

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 3x380/500 V - 50/60 Hz /-10% -Output: 3 Ph: 0-380/500V 0-400Hz 5.5A AC -Weight: 6 kg

Reflective photoelectric sensor, optical sensor -Type: BES M08MD-GNX10B-EV02-EEX Quantity: 15 available Price: per package -Weight: 0.2 kg

plug socket -5x: 7000-08351-0000000 -5x: 7000-08321-0000000 -4x: 7000-08361-0000000 -5x: 7000-08341-0000000 -5x: 7000-08371-0000000 Price: complete -Weight: 2 kg

Grinding drum, deflection drum, belt grinding machine, belt sander -Drum is for a husband grinder -Drum width: 170 mm -Drum: Ø 200 mm -Eccentric adjustment with touch clock -Number: 2x drums available -Price: per piece -Dimensions: 200/290/H280 mm -Weight: 13 kg

In-store baking oven Miwe Econo Manufacturer : Miwe Type : EC 6.0604 Year of construction : 2010 6 supports for 60x40cm trays with steam condenser Base cabinet 400V 50Hz 0.2kW Details see picture

pressure: 135 t chamfer lenght: 3050 mm distance between columns: 2550 mm stroke: 400 mm quantity of oil: 300 l Control: Cybelec Visitouch total power requirement: 15 kW weight of the machine ca.: 10.700 Kg range L-W-H: 4200x2200x3200 mm Equipment: - Controlled axes: Y1, Y2, X, R, Z1, Z2 - SICK” light barrier in front of the machine - Side safety guards - Protective grille behind the machine - foot switch - incl. tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dust suction hood: 100 mm Motor output: 1,1 kW Air consumption: 720 m³/h Dimensions (L/W/H): 1150 x 515 x 1640 mm Weight: 82 kg : m³/h : mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU215X088 MakeVMI LocationBarneveld CEcheck TypeMB1200 Main Features MaterialStainless steel Motor7.5 KW Length950 mm Specified Features - Stirrer MaterialStainless steel 1.4306 (304L) Turbo stirrercheck Shaft length950 mm Sizes stirring headø 200 mm Motor7,5 kW, 400 V, (Ex) With variable speed drivecheck Mounted on supportcheck Adjustable heightcheck Information No.156125 Mach.No.156125 Year of construction2009 Mounted on framecheck With switchcheck Floorspace1,61 x 1,90 m Total height2,90 m ATEX compatiblecheck Extra Specificationswith E&:H flow meter (as is)StirrersVMI EmulsionerMixers > StirrersBrand > VMI Emulsioner What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Ple ...