132,213 used machines on RESALE, but how to find them? Machine Search
B&A REF: 9024 TON: 160 SCREW DIAMETER: 50MM SHOT WEIGHT: 343 STROKE VOLUME: 377CM3 INJECTION PRESSURE: 1892AR PLATEN SIZES: 710 X 660MM DBTB: 520 X 470MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 500MM MOULD OPENING STROKE: 450MM MAX DAYLIGHT: 950MM EJECTOR STROKE: 150MM CONTROLS: MC6 CORE PULLING: 2 AIR VALVES: 2 HEATING CAPACITY: 17.7KW ROBOT INTERFACE: EUROMAP 67 ROBOT: GIEGER TECNOMATIC SCREW DRIVE: ELECTRIC HOT RUNNER: 12 ZONE
Parallel Lathe SCULFORT type MAXICAP SENIOR 380 x 4000 RN Between points: 4000 mm Maxi Ø on bench: Ø 780 mm Maxi Ø over saddle: Ø 580 mm (rear trolley dismantled) - Ø 500 mm (without rear trolley dismantled) Maxi diameter in brocken bed: Ø 1160 mm Width in brocken bed: 400 mm Spindle: Ø 80 mm Spindle speed: from 16 to 1280 RPM Square turret 3-jaws chuck Ø 400 mm Threadings: Metric + Withworth 3 points steady max Ø 350 mm Tailstock CM6 Motor power: 13 CV Feeds: auto transverse + longitudinal Clutch rapid used Lubricant tank Dimensions (L x W x H): 6500 x 1800 x 1900 mm Weight: approx 7 T
Grinding length: 600mm, grinding width: 250mm, table dimensions X/Y: 600mm/250mm, max. table speed: 22m/min, table height: 1020mm, grinding wheel dimensions X/Y/Z: 225mm/25mm/51mm. Machine dimensions X/Y/Z: approx. 1800mm/1100mm/1900mm, weight: approx. 1500kg. The machine was sealed about 5 years ago but currently shows a new leakage. Documentation available. An on-site inspection is possible.
1500L Mixing Vessel with Mixer Vertical stainless steel tank 1500L Gross Volume Manufacture: Unitstaal A/S Denmark Year of Manufacture: 2000 Diameter Approx 1350mm Height Approx 2300mm (Including Motor) Bottom Outlet DIN Butterfly Valve Top Manway Double Walled with Insulation Pressure Gauge on Top Sight Level Sight Tube Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
Suction Feeder, 2 Pockets, Compressor, Table Folding Machine
Flatpile Feeder, 1st Station: 4 Pockets, 2nd Station: 4 Pockets, 2 Knives, Delivery
Roundpile Feeder, 1st Station: 4 Pockets, 2nd Station: 4 Pockets, Delivery
High Speed Paper Folding Machine, Counting and Batching, Digital Plate Adjustment For Accurate Reading, Sound Hoods, 6 Fold Types, Double Sheets and Jam Detector, Suctuion Feeding, Complete with Perforation Unit and Perforation Blades, Up To 240gsm, Speed: 27000 Sheets/Hours
General SKU381X957 LocationBarneveld CEcheck MakeK-tron Main Features MaterialStainless steel Motor0.45 KW Inlet diameter150 mm Specified Features - Metering screw MaterialStainless steel 1.4301 (304) Metering screws Metering screwcheck Screw diameter2x 35 mm Pitch10 mm Shaft diameter40 mm Screw length400 mm With hoppercheck Capacity± 50 l. Hopper sizesø 200/400x880 mm Inletø 150 mm Outletø 100 mm With DC motorcheck 0,45 kW, 200 volt, 2000 rpm, With breaking/mixing shaftcheck Information TypeK-ML-KT35 Atex No.310358/MO-73640 Floorspace1,10 x 0,70 m Total height1,30 m Extra SpecificationsWith LWF D5 platform scaleMetering screwsK Tron SoderDosing units > Metering screwsBrand > K Tron Soder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are w ...
General SKU214X079 MakeCollin LocationBarneveld TypeW110 AP x 350 Main Features Motor1.5 KW Width350 mm Specified Features - Mixing mill Motor1,5 kW, 380 volt, 1410 rpm Mill width350 mm Mill diametre110 mm With variatorcheck 3-36 rpm With temperature controlcheck 20-270°C Electrical heatingcheck Information No.1130-25-08 Year of construction2008 With switchgearcheck Floorspace1,50x0,60 m Total height1,80 m Weight570 kg Extra SpecificationsTesting Roll mill, Roll diameter 110 mm, roll face width 350 mm, operating width 265 mm, nip width 0,1-5 mm :Mixing millsIQAP TechnologiesPlastic machinery > Mixing millsBrand > IQAP Technologies What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please ...
General SKU213X072 LocationBarneveld MakeHosokawa Nautamix NV Haarlem (NL) Pressure Working pressure jacket0.5 Bar Main Features MaterialStainless steel Volume300 Ltr. Motor1.5 KW Specified Features - Conical mixer Conical mixercheck Capacity300 l. Largest cone diameter1200 mm Cone height1600 mm Dished topcheck Top drivecheck Motor1,5 kW, 230/400 volt, 1459 rpm Motorca. 0,4 kW Cantilevered screwcheck With jacketcheck Bottom dischargeDia. 270 mm MaterialStainless steel 1.4301 (304) Information TypeDBX-300 No.M18123 With switchgearcheck Floor space1,40x1,40 m Total height2,40 m Weight800 kgConical mixersHosokawa NautaMixers > Conical mixersBrand > Hosokawa Nauta What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in ...
General SKU426U1359 LocationBarneveld MakeCollette Main Features MaterialStainless steel Volume150 Ltr. Motor11 KW Specified Features - Universal mixer MaterialStainless steel Universal mixercheck Capacity150 Ltr. Vessel sizesDia. 700x450 mm With covercheck InletDia. 80 mm Pneumatic operated outletcheck OutletDia. 200 mm With motor7,5/11 kW, 380 volt With lump breakercheck With motor3/4 kW, 380 volt Rotor speed2840/1430 rpm Information TypeGral 150 Mach.No.84MG15031 Year of constructionunknown With switchgearcheck Floorspace2,60x1,00 m Total height2,20 mUniversal mixersColletteMixers > Universal mixersBrand > Collette What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us i ...
General SKU300U597 LocationBarneveld MakeCollette Main Features MaterialStainless steel Volume75 Ltr. Motor7.5 KW Specified Features - Universal mixer Universal mixercheck Capacitybruto 75 Ltr. (netto 50 Ltr.) Vessel sizesDia. 520x350 mm With covercheck InletDia. 50 mm, 20 mm Pneumatic operated outletcheck OutletDia. 130 mm With motor7,5 kW, 380 Volt, 1440 rpm Rotor speed203/306 rpm With lump breakercheck With motor2,2-3,3 kW Rotor speed1500/3000 rpm MaterialStainless steel 1.4306 (304L) Information TypeGral-75 Mach.No.90M67561 Year of construction1989 Mounted on framecheck With switchgearcheck (as is) Floorspace2,2x0,90 m Total height2,2 m Weight1680 kg Extra SpecificationsThe stainless steel contact surfaces in the machine are polished. The machine is supplied with: - Extra agitator equipped with scrapers. - Extra pan with transport cart. - Separate tran ...
General SKU072Y444 MakeGustav Spangenberg TypeVM-8 No.51022 Year of construction1967 LocationBarneveld Material Pan materialStainless steel Main Features MaterialStainless steel Volume8 Ltr. Motor0.37 KW Specified Features - Planetary mixer Planetary mixer(1x) 2 Mixing/kneading shaftscheck Motor0,37 kW (3080 V, (Ex)) With covercheck With pancheck Capacity8,0 l Pan sizesø 230 x 200 mm With mechanical liftingcheck MaterialStainless steel Information With switchcheck Floor space0,8 x 0,7 m Total height1,8 m Weight150 kg ATEX compatiblecheckPlanetary mixersSpangenbergMixers > Planetary mixersBrand > Spangenberg What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneve ...
For sale: Band-All BA32-102 Banding Tool, The Band-All BA32-102 is a high-quality, durable banding tool designed for heavy-duty applications. It efficiently secures bundles with precision, offering ease of use and long-lasting performance. Perfect for industrial and commercial use, this tool ensures a tight and secure band every time. In excellent condition and ready for immediate use., Contact for more details or to arrange a viewing!, For sale: Band-All BA32-102 Banding Tool
A portable surface roughness measuring device Mitutoyo including a granite plate is available. Measurement range X: 17.5mm, measurement range Z: -200µm-160µm, Z resolution: 0.002µm, measuring speed: 0.5mm/s, return speed: 1mm/s, granite measuring table dimensions X/Y/Z: 400mm/250mm/70mm. Documentation available. An on-site inspection is possible.
Offer 25434 Technical data: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Autom. Quill feed - Quill stroke - Wind cutting device 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories
A Mitutoyo height measuring device including granite plate is available. Granite plate dimensions X/Y/Z: 1000mm/630mm/100mm, max. plate load: 300kg, plate weight: approx. 190kg, measuring range: 630mm, resolution: 0.001mm, min. repeatability: 1.8µm. Machine dimensions X/Y/Z: approx. 300mm/300mm/1050mm, weight: approx. 30kg. Documentation available. An on-site inspection is possible.
Key data: 180 mm, 400 mm
Control Siemens ... Sinumerik 840 D Turning diameter... 180mm Turning length... 400mm Inclined bed Spindle bore ... 63mm Turret head Tool turret ... 12 L x W x H ... 3875 x 2122 x 2345mm Machine weight ... 7000kg Spindle speed... 10-3500 rpm The machine is in good condition, possible to test under power at our warehouse in Brno.
General SKU248T594 MakeMolteni LocationBarneveld TypeI 300 Main Features MaterialMild steel Volume250 Ltr. Motor7.5 KW Specified Features - Planetary mixer Planetary mixercheck Motorcheck 7.5 kW, 380 Volt (Ciem) With variable speed drivecheck Speed scraper1450-950 rpm With pancheck (2x) Capacity250 Ltr. Pan sizesdia. 700x680 mm MaterialStainless steel Information No.25-12 Year of construction1968 Floor space1,6x1 m Total height1,6 m Weight1500 kgPlanetary mixersMolteniMixers > Planetary mixersBrand > Molteni What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Travel X/Y/Z: 1000mm/800mm/500mm, speed: 15000rpm, tool holder: SK40, tool positions: 30, spindle power: 15kW, table dimensions X/Y: 1250mm/800mm, max. table load: 1200kg. Machine dimensions X/Y: approx. 5000mm/3000mm, weight: approx. 12000kg. The machine has a damaged spindle. The machine has no controls anymore. Documentation available. On-site inspection is possible.
General SKU293X467 MakeMiele LocationBarneveld CEcheck TypeG7826 Main Features MaterialStainless steel Motor10 KW Specified Features - Miscellaneous MaterialStainless steel Motor10 kW, 400 volt Information No.00/74340434 Year of construction2009 Floor space0,90x0,80 m Total height1,95 m Weight505 kg Extra Specificationsusefull size inside chamber: 600x560x650 mmMiscellaneousMieleMiscellaneous > MiscellaneousBrand > Miele What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU302N426 LocationBarneveld MakeBrabender OHG Duisburg Main Features Volume0.03 Ltr. Motor2.3 KW Specified Features - Viscosity test machine Viscosity meterTorque Rheometer Motor3,3 KW, 220 Volt Variable speedcheck Speed10-250 rpm Analogue metercheck With recordercheck TypeServogor 320 With kneadercheck TypeW 30 H, with pneumatic feeder No.181510 Electric heatingcheck Capacity0,03 Ltr Information TypePlasticorder PLE 330 No.183518 Mounted on framecheck With switchgearcheck Floorspace1.5x0.6 M Total height1.2 M Weight600 KGViscosity test machinesBrabenderPlastic machinery > Viscosity test machinesBrand > Brabender What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit ...
We offer this used Sinico SIN-O-MATIC TOP 2000 saw and end processing machine, built in 2011. Model: SIN-O-MATIC TOP 2000 Type: TR110/2-350-CL-S CNC Serial Number: 1459 Year of manufacture: 10/2011 Weight: 7200 kg (plus magazine) Workpiece diameter: 110 mm Maximum workpiece length: 350 mm Installed power: 65 Max kW CNC control from NUM Automatic machine for cutting to length and machining the ends. Transfer machine with horizontal axis table for cutting and end processing of tubes and bars. Flexible and highly adaptable CNC machine. It guarantees high productivity, up to 2500 parts/hour, and is designed for the machining of small to large workpieces: bar diameters up to 110 mm, finished part lengths up to 350 mm. Maximum versatility in the processing of tubes and rods It is able to carry out the following machining operations Chamfering – Face Milling – Threading ...
Used dough divider / head machine KÖNIG, type: Mini Rex 4000 - AB -in bakery condition- - Tested and cleaned - Strap in very good condition - Condition: Good, ready to use - Video on request - Number of rows: 2 rows - Output: max. 4,000 pcs./h - Weight range: 25 - 130 g - El. Connection: 1.3 kW, 3x 400 V+N, 6 A, 50 Hz Visits and test runs are possible by arrangement.
A Hitachi EX1200 Hydraulic Excavator is the basis of the Mantsinen 140 RHC to act as a Ship Unloader for billets. Maintenance records are available including recent major service description. The list of equipment includes several auxiliary parts, such as a lifting yoke, a lifting head and a beam. Make: HITACHI (Japan) – MANTSINEN (Finland) Model: EX1200 – 140 RHC Year (manufacture): 2003/2004 Mothballed since: July 2025 Working hours: circa 21,600 Maintenance history: Serviced in May 2025 incl. lift cylinders overhaul which means it is expected to run for approximately 930 hours until the next service Mass: 910 / 108,000 / 153,000 kg Cabin Elevator / Hydraulic Excavator / Ship Unloader Maximum load: 25,000 kg Engine power / type / family: 482 kW / S6R-Y2TAA-2 / SR-TAA Fuel: Diesel
CNC machining center MAKA Type SC 20 T Tandem table version Year of construction 2000 3-axis machining Workpiece cube dimension Maximum length 1500 mm Maximum width 1500 mm (per table) Maximum height 240 mm Maximum travel distances approx. X 4300 mm x Y 2500 mm x Z 400 mm -Milling unit 2 ISO 40 milling motor Water-cooled power maximum 8/11 kW Tool holder SK40 -Tool magazine consisting of 2 chain tool changers Number of places 16 each Tool holder ISO 40 -Surface grid table in tandem version with extension stroke for safe loading Workpiece clamping via vacuum -CNC control type bwo 900C, 512 KB RAM, PC -Operating voltage 400V / 50 Hz Installed power approx. 34 kW, connection fuse 80A Operating pressure 6 bar Machine weight approx. 8000 kg
- Flat pile feeder - MCC2 Control - 1. Station with 4 buckles - 2. Station with 4 buckles - knife - mobile delvery
General SKU212X067 MakeMinox TypeMTS 2000/2 LocationBarneveld CEcheck Main Features MaterialStainless steel Surface2.5 m2 Sizes diameter1800 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface2,5m² Number of sieve decks:2 (1,5mm-1,2mm) Sieve sizesDia. 1800 mm With covercheck InletDia. 300 mm OutletDia. 200 mm Drive excentercheck Motor2,2 kW, 220-240/380-420 volt, 1425 rpm With extra sieve deckscheck 3x ( 0,2mm-0,8mm-1,25mm) Tumbler screening machines MaterialStainless steel 1.4301 (304) Information No.9518 Year of construction1997 Mounted on mild steel framecheck Floor space2,40x2,40 m Total height1,90 m Weight1200kgTumbler screening machinesMinoxSieves > Tumbler screening machinesBrand > Minox What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination ...
Control Siemens Sinumerik 840D Max. turning diameter 280 mm Max. rod passage main spindle 61 mm Turning length 490 mm Speed main/sub-spindle 4700 / 6000 min-1 12-fold revolver with applied revolver Wkz. C-axis Y-axis Parts catcher Workpiece ejector Chip conveyor Various tool holders
General SKU330W710 MakeGEA Collette N.V. Typeultimagral 600 Mach.No.06G0600036 Year of construction2006 Pressure Working pressure jacket2 Bar Main Features MaterialStainless steel Volume600 Ltr. Motor37 KW Specified Features - Universal mixer MaterialStainless steel 1.4401 (316) Gral-granulatorcheck CapacityGross 600l, net 300-400l, 600kg Vessel sizesDia. 1100 x 700 mm With covercheck InletDia, 100mm, 45 mm, 30 mm Pneumatic operated outletcheck OutletDia. 250mm With jacketcheck With motor37kW (400/690 V, 1480 rpm) With variable speed drivecheck Frequency controller With lump breakercheck With motor15kW (400/690 V, 2900 rpm) Information Mounted on framecheck LocationBarneveld With switchgearcheck (as is) CEcheck Extra Specificationsscope of this machine: - Collette Ultimate Gral 600. - system for cleaning (CIP) with 2x Milton pumps. - vacuum pump, Busch, ty ...
General SKU349U857 MakeHywema LocationBarneveld CEcheck TypeKV 12-B Main Features MaterialStainless steel Motor2.2 KW Specified Features - Lifting/tilting machine Lifting + tilting machinecheck Max. weight1000kg Hydraulic drivecheck With hydraulic unitcheck Motor2,2kw, 220/380Volt Information No.69397/01 Year of construction2021/12 Mounted on framecheck With switchcheck With switchgearcheck Floorspace2,1x2 m Total height3m Weight1350 kg Extra SpecificationsThe Hywema is equipped with a vibration motor and a dosing lock. : Vibration motor data: Brand: Venanzetti vibrazion Type: VV05N/2 C1 Voltage: 230/400 Volt Power: 0.17 kW Equipped with CE and EX : Dosing lock data: Brand: Baumgarten Type: 200aL VA Motor: 0.25 kW, 230/400 Volt Lock speed: 15 rpm Outlet diameter: 200 mm Equipped with CE Lifting/tilting machinesHywemaConveying systems > Lifting/tilting machine ...
General SKU226N154 MakeG. Ferrari Fils SPRL Brussels TypeMelangeur en V No.97172 Year of construction1997 LocationBarneveld Main Features MaterialStainless steel Volume1400 Ltr. Specified Features - Tumbler mixer V-type tumbler mixer(1x) Capacity1400 ltr Diameter800mm Outletdia. 200mm With brake motor1,5 kW With variable speed drivecheck With safety gatescheck MaterialStainless steel 1.4301 (304) Information With switchgearcheck Floorspace4,5 x 2,3 M Total height4,0 M Weight2200kgTumbler mixersG. Ferrari & FilsMixers > Tumbler mixersBrand > G. Ferrari & Fils What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
ILLIG RDM70Kb Mold for PP Cups, Ø73 mm 32 Cavities, complete with Stacker Basket with Rods & Brushes & Rake, age May, 1997., Manufacturer: MARBACH
Machining center Mori Seiki M25 – FH 2/35
Temperature-controlled processing tanks are vital in various industries, including food, pharmaceuticals, and chemical manufacturing, where precise temperature management is essential for product quality and safety. Here’s a detailed overview of temperature-controlled processing tanks:, What is a Temperature-Controlled Processing Tank?, A temperature-controlled processing tank is a vessel designed to maintain a specific temperature range during the processing of materials. These tanks are equipped with heat exchange systems, temperature sensors, and control mechanisms that ensure the contents remain at the desired temperature throughout the processing cycle., Key Features, - Heating and Cooling Systems:, - Heaters: Can be electric or steam-based to raise the temperature of the contents., - Chillers: Usually water or glycol-based cooling systems to lower the temperature., - Insulation: ...
The MALLDISON milk pasteuriser with a capacity of 1000 liters per hour is typically designed for efficient processing of milk, ensuring safety and preservation of quality through pasteurization. Here are some key features and aspects you might find relevant:, - Functionality: The machine heats milk to a specific temperature for a set period, killing harmful bacteria while preserving essential nutrients., - Capacity: With a processing capability of 1000 liters per hour, its suitable for medium to large dairy operations, allowing for high volumes of milk to be pasteurized quickly., - Design: Many pasteurisers feature a stainless steel construction for hygiene and easy cleaning. They often have insulated heating chambers to maintain temperature efficiently., - Control System: Modern machines often come with digital controls for precise temperature and timing adjustments, improving the relia ...
used
Available immediately from operational European factory. Equipment professionally maintained and in excellent technical condition. FLAT KNITTING MACHINES - Steiger Antares 3.130SC Freegauge, E14 (E7/E14), Switzerland Quantity: 1 unit Year: 2019 - Steiger Antares 3.130 SC, E14, Switzerland Quantity: 5 units Year: 2019 - Steiger Antares 3.130 SC Fully Fashion, E16, Switzerland Quantity: 1 unit Year: 2019 - Stoll ADF 530-32 Multi Gauge Quantity: 1 unit Year: 2018 SOFTWARE Programming Software Model+ by Steiger, Switzerland Quantity: 1 unit Year: 2019 LINKING MACHINES - Exacta Ultravision Stoptronic Italy E16 Quantity: 4 units Year: 2019 - Exacta Ultravision Stoptronic Italy E16 Quantity: 4 units Year: 2018 - Exacta Ultravision Stoptronic Italy E22 Quantity: 4 units Year: 2019 SEWING MACHINES - Exacta Cupseamer Quantity: 1 unit Year: 2019 - Durkopp Adler 281-140342-03, Single Needle ...
A CNC universal milling and boring machine Decke Maho is available. Travel X/Y/Z: 500mm/400mm/400mm, power: 7kW/5kW, torque: 88Nm/63Nm, speed: 4500rpm, tool interface: SK40, feed rate: 5m/min, rapid traverse: 5m/min, rotary table diameter: 700mm, max. workpiece height: 500mm, max. table load: 200kg, machine dimensions X/Y/Z: approx. 3200mm/1650mm/2550mm, weight: approx. 2600kg, control: Heidenhain TNC 124. Documentation available. On-site inspection is possible.
CNC gantry flame cutting machine Manufacturer: Messer Type: Omnimat P 7000 Year of Make: 1995 CNC Control: Global Control Plus Track width: 7,000 mm 8 x oxy-fuel burner type ALFA 8 x Omnilift 200 Without a running track Without table Without filter Reference Number: R2137
Deck Oven Miwe Ideal 6.1820 - 5 Miwe Ideal deck ovens approx. 22sqm baking area - Manufacturer: Miwe Michael Wenz GmbH - Type: Ideal 6.1820 - a stove is 180cm wide and 200cm deep with 6 shelves - Total baking area of one oven 21.6sqm - with gas burner - with pull-out stoves - Year of construction 2007
Homag modular unit, mould processing unit, milling unit, shape milling unit, double-end profiler, edge processing machine, milling motor for edge processing machine -HOMAG milling unit with Perske motors -with keying of 2 sides each -Milling unit: swivelling -1x Motors Perske DVMS 1504/2 -Power: 2.0 kW -Voltage: 165 volts - Frequency: 300 Hz -Speed: 17,500 rpm -1x Motoren Perske DVMS1504/2 -Power: 2.0 kW -Voltage: 165 volts - Frequency: 300 Hz -Speed: 17,500 rpm -Dimensions: H600/W340/D450 mm
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.75 mmFloor space/WeightDimensions (L x W x H)5,86 x 2,07 x 2,3 mWeight approx.12000 KgTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment850 NmWork spindle (left)Spindle noseFlat flange Di ...
Technical DataFeed rate longitudinal/transverse/vertical60000/30000/40000 mm/minRapid traverse longitudinal/transverse/vertical60/30/40 m/minGeneralUniversal Milling Machining Centre - Linear pallet changer with 2 pallets - Coolant tank 2,500 lt / 660 gallon - Internal coolant supply 40 bar / 580 psi through spindle centre (AD) - Chip conveyor - Rotating clear-view window - Electronic handwheel; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal3400 mmCross3400 mmVertical1600 mmTool changerApplicationUniversal Type of magazineshelf Tool changer planevertical Type of gripperDouble gripper Clamping surface: 2,000 mm x 2,500 mm / 78.7 in x 98.4 in (DIN 55201 - A2) centre bore: d 100 mm H6 / d 4 in H6 level bush: d 25 mm H6 / d 0.9 in H6 Number of T-slots: 1x 22 H7 (alignment groove, table centre) 8x 22 H12 (clamping grooves) Distance betweeUniversal head with controlled ...
Fabricante MORI SEIKI Modelo NLX2500SY/700 Mes / Año 12/2011 CNC MORI SEIKI M730 BM Capacidades Volteo sobre bancada/carro 590/360 mm. Diámetro máximo torneable 460 mm. Longitud máxima torneable 795 mm. Paso de barra 80 mm. Eje Y INCLUIDO Recorridos y avances Recorrido eje X/Z 260/795 mm. Rango eje Y ±50 mm. Recorrido sub-cabezal eje B 734 mm. Avance rápido ejes X, Z, B 30.0000 mm/min Avance rápido eje Y 10.0000 mm/min Avance trabajo ejes X, Y, Z, B 0-5.000 mm/min Cabezal Eje C en cabezal INCLUIDO Indexación eje C cabezal 0.001º Velocidad cabezal 4.000 rpm Número gamas velocidad cabezal 2 Tipo nariz cabezal JIS A2-8 Diámetro paso cabezal 91 mm. Potencia motor principal 18.5 kW Sub-cabezal Eje C en sub-cabezal INCLUIDO Indexación eje C sub-cabezal 0.001º Velocidad sub-cabezal 6.000 rpm Número gamas velocidad sub-cabezal 1 Tipo nariz sub-cabe ...
Screw diameter: 120 mm Injectable volume / Shot volume: 5598 cm3 Injection pressure : 1137 bar Column passage / Bettween tie bar: 1060 x 1060 mm Mould thickness mini-maxi / Mould tickness mini-max: 350 - 1100 mm Opening stroke: 1150 mm Euromap 12 4 Hydraulic Cores / 4 Corepulling
maximum number of results exceeded
please refine your search
