128,430 used machines on RESALE, but how to find them? Machine Search
Industriemischer f?r trockene Pulver, feuchte oder past?se, klebrige Produkte. Mit dem Einwellen-Spiralmischer lassen sich die Produkte in wenigen Minuten zu einer gleichmigen Masse mischen.- Spezifikationen: R?hrwerkstyp: Einwellen-Spiralr?hrwerk | Kapazit?t: max. 120 Liter | maximale Drehzahl der Maschine im Leerlauf: 53r/min | Maschinenabmessungen: L2030xB630xH980mm | Gewicht: 450kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Industrial mixing machine for blending dry, moist or pasty products, specifically designed for products with large net weight. The horizontal single shaft with the double ribbon mixers is blending the materials into high uniformity in a few minutes. ? Specifications: agitator type: single-shaft double ribbon agitator | capacity: max. 9000 liters | max. speed of the machine in neutral: 20 rpm | power: 90kW | machine dimensions: L6500xW2100xH2800mm | weight: 9800kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviati ...
3-D mixer for fast mixing of powdery materials. The innovative three-dimensional mixing principle of oscillating, parallel and rolling motion generates a strong impulse movement to cause a continuous forward pushing of the materials. With an excellent mixing effect in the result, the technology also allows short mixing times and so a higher output compared to conventional mixers. - Specifications: Tank volume: 300 liters | processing volume: max. 240 liters per batch | max. processing weight: 150kg | power 4kW | machine dimensions approx.: L1800?W1950?H1700mm | weight: 1000kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations fro ...
Horizontal single-shaft mixer for dry, moist and pasty products. - Specifications: S-shaped mixing paddle | volume tank: 200 liters | processing volume: max. 140 liters per run | stirring speed: max. 24/min | stirring motor power: 4kW | discharge motor power: 0.75kW | machine dimensions approx.: L1850xW600xH1000mm | weight: 720kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Automatic container/capsule filling and sealing machine. - Suitable for the filling of powdery products (coffee, coffee blends, chocolate, milk powder, etc.) in different sized capsule containers (e.g. Nespresso, K-Cup, Lavazza, Tassimo, Bellissimo, without filter, etc.) and subsequent sealing. Automatic dosing, filling by an auger filler. UV sterilization system, anti-static device and vacuum cleaning system for mould formats included. Automatic film feeding and double heat sealing of the capsule. - Specifications: max. speed of the machine in neutral: 90 cups/minute | filling range: 0-20g | filling accuracy: +/- 0.15g | capacity of hopper: 10L (approx. 6kg powder) | power supply and consumption: 220V, 7.5kW | required compressed air and flow rate: 6-8 bar, approx. 300L/min | flow rate inert gas: approx. 200L/min | machine dimensions: L3420xW2200xH2688mm | weight: 900 kg. Specifications ...
Automatic multi-lane filling and capping machine for cups, containers or trays incl. film sealing unit. Suitable for various container sizes, shapes and materials (e.g. PP, PS, PET, paper, laminated films, etc.). Equipped with 6 piston pumps for dosing of liquids and past-like products. In general, the line can be configured for all types of (separate) dosing systems for fresh or dry, chunky products, granules or powdery products (price adjustment may be necessary). This allows perfect filling and packaging of instant meals, pasta, pasta, fresh or dried fruits, snacks, soup powders, frozen meals, yogurt, ice cream, jam, etc. Automatic operation from feeding the containers/cups, filling, sealing with film and capping with a lid. Easy operation due to touch screen monitor, stainless steel version (SUS304), easy to clean. Other features: print mark sensor, stirrer for hopper, level sensor, ...
Automatic multilane cup or container filling system including film sealing module. - Suitable for different container sizes, shapes and materials (e.g. PP, PS, PET, Paper, laminated films, etc.). Perfect to pack instant food, noodles, pasta, dried fruit, snacks, candies, chocolate, soup powder, frozen food, yogurt, ice cream, jelly, etc.. Automatic operation from drop cup, filling to sealing. Suitable for all kind of (separate) dosing systems for liquids, pastes, granules, powder, etc.. Touch screen for easy operation, stainless steel version, easy cleaning. Print mark sensor. Customizable mould for container allows a wide range of sizes/shapes. - Specifications: number of lanes: 2 | max. speed of the machine in neutral: 40 cycles/minute | power: 220V, 2.1kW | compressed air: 0,2m?, 6bar | machine dimensions: L3000xW850xH1600mm. That machine/system is available in different versions for ...
Automatic multilane cup or container filling system including film sealing module. - Suitable for different container sizes, shapes and materials (e.g. PP, PS, PET, Paper, laminated films, etc.). Perfect to pack instant food, noodles, pasta, dried fruit, snacks, candies, chocolate, soup powder, frozen food, yogurt, ice cream, jelly, etc.. Automatic operation from drop cup, filling to sealing. Suitable for all kind of (separate) dosing systems for liquids, pastes, granules, powder, etc.. Touch screen for easy operation, stainless steel version, easy cleaning. Print mark sensor. Customizable mould for container allows a wide range of sizes/shapes. - Specifications: number of lanes: 2 | max. speed of the machine in neutral: 60 cycles/minute | power: 220V, 2.6kW | compressed air: 0,2m?, 6bar | machine dimensions: L3000xW950xH1600mm. That machine/system is available in different versions for ...
Automatic multi-lane filling and capping machine for cups, containers or trays incl. film sealing unit. Suitable for various container sizes, shapes and materials (e.g. PP, PS, PET, paper, laminated films, etc.). Equipped with a 4-head linear weigher and 4 piston pumps for liquid dosing, this sample line is especially suitable for fresh olives and liquids. In general, the line can be configured for all types of (separate) dosing systems for liquids, pastes, granules, powders (price adjustment may be necessary). This allows perfect filling and packaging of instant meals, pasta, pasta, fresh or dried fruits, snacks, soup powders, frozen meals, yogurt, ice cream, jam, etc. Automatic operation from feeding the containers/cups/trays, filling, sealing with film and capping with a lid. Easy operation due to touch screen monitor, stainless steel version (SUS304), easy to clean. Print mark sensor ...
Fully automatic sticker labelling machine for a wide range of products and packaging (cartons, boxes, beverage multipacks such as sixpacks and many more). The labeller can be easy integrated into any line, in principle, by adding it to a conveyor belt, for example. The labelling unit is adjustable in the height. The labelling unit is controlled by a PLC and operated by a touch screen. - Specifications: label length: 6-250mm | label width (backing paper width): 20-150mm | inner diameter of the label roll: 76mm | max. outer diameter of the label roll: max. 240mm | label precision: ?1 mm | max. speed of the machine in neutral: 150 cycles/minute | power: 220V, 50Hz/60Hz | machine dimensions approx.: L950xW900xH1480mm | weight: 70kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new ...
Fully automatic paper labelling machine with PLC control or touch switch knob control, photoelectric device, variable speed motors and conveyor chain. - Specification: label length: max. 300mm | label width: max. 120mm | max. speed of the machine in neutral: 83 cycles/minute | power: 220V, 50Hz/60Hz, 1.75kW | machine dimensions: approx. L2440mm?W1000mm?H1300mm | weight: approx. 800kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Fully automatic paper labelling machine for applying labels on both sides (back and front). PLC controlled or touch switch knob control, photoelectric device (LEUZE sensor), variable speed motors and conveyor chain board. - Specification: label length: 10-250mm | label width: 10-150mm | bottle diameter: customized | label core diameter: 76mm. max. label roll diameter: 300 mm. Label precision: ? 1mm | max. speed of the machine in neutral: 150 cycles/minute | power: 220V/380V, 50Hz/60Hz, 750W | machine dimensions: L2400mm?W1500mm?H1400mm | weight: 400kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are po ...
Fully automatic labeller for small vials, ampules or other cylindrical products made of glass or plastic. The labeller has a magazine with a capacity of approx. 200 vials or ampules (depending on their diameter), which are transported separately to the labelling unit between conveyor rollers. After labelling, the products are discharged via a small chute. The labeller is PLC controlled and operated by a touch screen. The separator, the roller conveyor belt and the labelling unit are driven by servo motors, each with its own drive. So, the labeller can be optimally adjusted to your requirements. 3-line ribbon printer for e.g. date printing, batch number, BBD, included. - Specifications: Product diameter: 10-30mm | label length: 10-314mm | label width (backing paper width): 20-130mm | inner diameter of the label roll: 76mm | max. outer diameter of the label roll: max. 280mm | label precisi ...
Fully automatic labeller for bottles, cans, containers. PLC control, operation via touch monitor. Variable speed motors and conveyor chain board. - Specifications: label length: 6-260mm | label width (backing paper width): 10-150mm | bottle diameter25-130mm | inner diameter of the label roll: 76mm | max. outer diameter of the label roll: 300mm | label precision: ? 1mm | production capacity: max. speed of the machine in neutral: 40 cycles/minute | power: 220V, 50Hz/60Hz. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Vertical packaging machine with piston pump for dosing liquids. Especially for customized pouches with regular or irregular shapes such as round pouches, bottle-shaped pouches, etc. The sealing jaws are manufactured according to the specific bag layout. PLC controlled, operation via touch screen. - Specifications: bag sizes: pillow bags: 3-side or 4-side seal pouches: L(40-170)xW(20-110)mm | suitable film width: 220mm | suitable film: composite film, heat sealable | dosing range: 1-30ml | max. speed of the machine in neutral: 50 cycles/minute | power supply: 220V, 50Hz | power consumption: 2,8kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L930xW750xH1920mm | weight: 350kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available ...
Vertical packaging machine with auger dosing unit for powders. Especially for customized pouches with regular or irregular shapes such as round pouches, bottle-shaped pouches, etc. The sealing jaws are manufactured according to the specific bag layout. PLC controlled, operation via touch screen. - Specifications: bag sizes: pillow bags: 3-side or 4-side seal pouches: L(40-170)xW(20-110)mm | suitable film width: 220mm | suitable film: composite film, heat sealable | dosing range: 1-30g | max. speed of the machine in neutral: 50 cycles/minute | power supply: 220V, 50Hz | power consumption: 2,8kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L930xW750xH1920mm | weight: 350kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available i ...
Vertical packaging machine with piston pump for dosing liquids. Equipped with a punching module for sealing corners (cross sealing) with a rounded shape. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, pneumatically driven cross-sealing. - Specifications: bag sizes: pillow bags: L(40-160)xW(20-100)mm, 3-side or 4-side seal pouches: L(40-160)xW(20-100)mm | suitable film width: 240mm | suitable film: composite film, heat sealable | dosing range: 1-50ml | max. speed of the machine in neutral: 60 cycles/minute | power supply: 220V, 50Hz | power consumption: 2kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L900xW700xH1850mm | weight: 250kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packa ...
Vertical packaging machine with volumetric cup filler for granules. Especially for customized pouches with regular or irregular shapes such as round pouches, bottle-shaped pouches, etc. The sealing jaws are manufactured according to the specific bag layout. PLC controlled, operation via touch screen. - Specifications: bag sizes: pillow bags: 3-side or 4-side seal pouches: L(40-170)xW(20-110)mm | suitable film width: 220mm | suitable film: composite film, heat sealable | dosing range: 1-30g | max. speed of the machine in neutral: 50 cycles/minute | power supply: 220V, 50Hz | power consumption: 2,8kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L930xW750xH1920mm | weight: 350kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are availa ...
Vertical packaging machine with auger dosing unit for powders. Equipped with a punching module for sealing corners (cross sealing) with a rounded shape. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, pneumatically driven cross-sealing. - Specifications: bag sizes: pillow bags: L(40-160)xW(20-100)mm, 3-side or 4-side seal pouches: L(40-160)xW(20-100)mm | suitable film width: 240mm | suitable film: composite film, heat sealable | dosing range: 1-50g | max. speed of the machine in neutral: 60 cycles/minute | power supply: 220V, 50Hz | power consumption: 2kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L800xW960xH2050mm | weight: 300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packagi ...
Vertical packaging machine with volumetric cup filler for granules. Equipped with a punching module for sealing corners (cross sealing) with a rounded shape. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, pneumatically driven cross-sealing. - Specifications: bag sizes: pillow bags: L(40-160)xW(20-100)mm, 3-side or 4-side seal pouches: L(40-160)xW(20-100)mm | suitable film width: 240mm | suitable film: composite film, heat sealable | dosing range: 1-50g | max. speed of the machine in neutral: 60 cycles/minute | power supply: 220V, 50Hz | power consumption: 2kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L800xW960xH1900mm | weight: 300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your pa ...
Vertical packaging machine as a high-speed version with piston pump for dosing liquids. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, cross sealing driven by servomotors. - Specifications: bag sizes: pillow bags: L(20-145)xW(20-110)mm, 3-side or 4-side seal pouches: L(20-145)xW(30-120)mm | suitable film width: 240mm | suitable film: composite film, heat sealable (monofilm on request) | dosing range: 1-50g | max. speed of the machine in neutral: 150 cycles/minute | power supply: 220V, 50Hz | power consumption: 5kW | air pressure: max. 0.6MPa | dimensions: L900xW700xH170mm | weight: 300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from ...
Vertical packaging machine as high-speed version with auger dosing unit for powder. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, cross sealing driven by servomotors. - Specifications: bag sizes: pillow bags: L(20-145)xW(20-110)mm, 3-side or 4-side seal pouches: L(20-145)xW(30-120)mm | suitable film width: 240mm | suitable film: composite film, heat sealable (monofilm on request) | dosing range: 1-50g | max. speed of the machine in neutral: 150 cycles/minute | power supply: 220V, 50Hz | power consumption: 5kW | air pressure: max. 0.6MPa | dimensions: L900xW700xH170mm | weight: 280kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from sto ...
Vertical packaging machine as high-speed version with volumetric dosing unit for granulates. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, cross sealing driven by servomotors. - Specifications: bag sizes: pillow bags: L(20-145)xW(20-110)mm, 3-side or 4-side seal pouches: L(20-145)xW(30-120)mm | suitable film width: 240mm | suitable film: composite film, heat sealable (monofilm on request) | dosing range: 1-50g | max. speed of the machine in neutral: 120 cycles/minute | power supply: 220V, 50Hz | power consumption: 5kW | air pressure: max. 0.6MPa | dimensions: L900xW700xH170mm | weight: 300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately ...
Vertikale Verpackungsmaschine mit Schneckendosiereinheit f?r Pulver. Folgende Beuteltypen sind konfigurierbar: Schlauchbeutel mit R?ckennaht, 3-Randsiegelbeutel oder 4-Randsiegelbeutel (Aufpreis). SPS gesteuert, Bedienung ?ber Touchscreen, pneumatisch angetriebene Quersiegelung. - Specifications: bag sizes: pillow bags: L(20-160)xW(20-110)mm, 3-side or 4-side seal pouches: L(20-160)xW(30-120)mm | suitable film width: 240mm | suitable film: mono-material or laminated, heat sealable | dosing range: 1-100g | max. speed of the machine in neutral: 50 cycles/minute | power supply: 220V, 50Hz | power consumption: 2kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L600xW720xH1590mm | weight: 250kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machine ...
Vertikale Verpackungsmaschine mit Kolbenpumpe f?r das Dosieren von Fl?ssigkeiten. Folgende Beuteltypen sind konfigurierbar: Schlauchbeutel mit R?ckennaht, 3-Randsiegelbeutel oder 4-Randsiegelbeutel (Aufpreis). SPS gesteuert, Bedienung ?ber Touchscreen, pneumatisch angetriebene Quersiegelung. - Specifications: bag sizes: pillow bags: L(20-160)xW(20-110)mm, 3-side or 4-side seal pouches: L(20-160)xW(30-120)mm | suitable film width: 240mm | suitable film: mono-material or laminated, heat sealable | dosing range: 1-100ml | max. speed of the machine in neutral: 50 cycles/minute | power supply: 220V, 50Hz | power consumption: 2kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L700xW600xH1720mm | weight: 300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 differe ...
Vertical packaging machine with volumetric cup filler for granules. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, pneumatically driven cross-sealing. - Specifications: bag sizes: pillow bags: L(20-160)xW(20-110)mm, 3-side or 4-side seal pouches: L(20-160)xW(30-120)mm | suitable film width: 240mm | suitable film: mono-material or laminated, heat sealable | dosing range: 1-100g | max. speed of the machine in neutral: 50 cycles/minute | power supply: 220V, 50Hz | power consumption: 2kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L700xW600xH1600mm | weight: 280kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediatel ...
Metal Detector to check vertical falling products. The product is passed from above through a hopper. Ideal to combine with multi head weigher and vertical packaging machine. Stainless steel framework, touch screen. - Specifications: detecting accuracy: FE from ? 0.6mm, SUS from ? 1.8mm | tunnel size: ? 100mm | power: 220V/0.05kW, 50Hz/60Hz | dimensions and weight: L50xW50xH40mm, 45/145kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Sealing module to be added behind large FILLINGmachines. To close large PE-bags with a hot seal seam. Inclusive 700mm roller belt. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Very small and high sensitive Metal Detector, flexible setting of detector head, suitable for detecting small products and specials applications. - Specifications: stainless steel framework | weight of product: max. 1kg | detecting speed: 0.17-1m/sec | detecting accuracy: FE from ? 0.6mm, SUS from ? 1.8mm | tunnel size WxH: 150x100mm | max. passing size WxH: 110x60mm | power: 220V/0.15kW, 50Hz/60Hz | dimensions and weight: L940xW500xH1198mm, 100/200kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Metal Detector for food and other (e.g. medical, chemical, textile) products, stainless steel framework, touch screen, self-learning system. - Specifications: weight of the product: max. 5kg | detecting speed: 0.2-0.8m/sec | detecting accuracy: FE from ? 1.0mm, SUS from ? 2.2mm | tunnel size WxH: 350x175mm | max. passing size WxH: 300x135mm | power: 220V/0.3kW, 50Hz/60Hz, dimensions and weight: L1545xW1114xH1383mm, 150/250kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
High-speed Metal Detector for the use in high-speed production lines, stainless steel framework, touch screen. - Specifications: detecting speed 0.2-1.7m/sec | detecting accuracy: FE from ? 0.8mm, SUS from ? 1.8mm | tunnel size WxH: 300x120mm | max. passing size WxH: 250x80mm | power: 220V/0.3kW, 50Hz/60Hz | dimensions and weight: L1505xW600xH890mm, 150/250kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Metal Detector for food and other (e.g. medical, chemical, textile) products, also suitable for wet products, stainless steel framework, touch screen, easy integration into existing production line. - Specifications: weight of the product: max. 50kg | detecting speed: 0.5m/sec | detecting accuracy: FE from ? 1.5mm, SUS from ? 2.5mm | tunnel size WxH: 450x250mm | max. passing size WxH: 410x210mm | power: 220V/0.45kW, 50Hz/60Hz | dimensions and weight: L1800xW800xH950mm, 180/280kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Metal Detector for food and other (e.g. medical, chemical, textile) products, also suitable for wet products, stainless steel framework, touch screen, easy integration into existing production line. - Specifications: weight of the product: max. 5kg | detecting speed: 0.5m/sec | detecting accuracy: FE from ? 1.5mm, SUS from ? 2.0mm | tunnel size WxH: 125x250mm | max. passing size WxH: 100x215mm | power: 220V/0.3kW, 50Hz/60Hz | dimensions and weight: L1627xW528xH1420mm, 110/210kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Combination of Metal Detector and Weigh Checker. With two recect devices to check if product metallic impurities and/or meets target weight. - Specifications: stainless steel framework, weight range: 5-990g | detecting speed 0.2-0.75m/sec | detecting accuracy: FE from ? 1.0mm, SUS from ? 2.0mm | target weight accuracy: ? 0.5g | tunnel size WxH: 330x150mm | max. passing size WxH: 280x110mm | power: 220V/0.35kW, 50Hz/60Hz | dimensions and weight: L1700xW600xH900mm, 160/260kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Fully automatic complete counting and packaging system for a wide range of agricultural products into mesh bags with a bag weight of 0.5 to 5.0 kg. Including feeding hopper, infeed conveyor, counting machine and fully automatic mesh bag packaging machines. - Specifications: max. speed of the machine in neutral: 18 cycles/minute | power: 380V, 2.6kW | compressed air: 6bar, 1.5m? | machine dimensions: customized. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Mesh bag packaging machine. Designed to handle PE mesh film to make pillow or gusset bags, suitable for packing fresh vegetable and fruits such as potatoes, onions, apples, cabbage, peas, carrots, pears, lemons, grapefruits, kiwi, etc.. Full stainless steel version, PLC controller and touch screen. Print mark sensor. Suitable films: PE-Net, Net-film combinations, etc. Bag styles: pillow, gusset and gusset bag with handle holes. - Specifiations: film width: max. 620mm | bag length: 100-380mm | bag width: 110-300mm | max. speed of the machine in neutral: : max. 20 cycles/minute | compressed air: 0,36m?/6bar | power: 220V, 3kW. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30- ...
Packaging machine equipped with a vacuum module for premade Doypack pouches, block bottom pouches, flat bottom pouches and other stand-up bag types. Compact construction with horizontal production processes. Batch/date printer and modules for specific pouch properties such as zipper, spout, gusset shape can be optionally integrated at a surcharge. Bag detectors checking the correct placement and complete opening of the e.g. Doypack pouch. The product infeed chute allows immediate pouch filling after the pouch is detected and keeps the sealing area free from contamination at the same time. The vacuuming takes place immediately before the bag is sealed by means of a lance which moves into the bag. The PLC controlled machine is operated via touch screen. Specifications: stainless steel version (SS304) | max. speed of the machine in neutral: 15 cycles/minute | bag width: 100-300mm | bag leng ...
Horizontal packaging machine, DUPLEX MINI VERSION, for premade doypacks, block bottom pouches, flat pouches. Duplex version with higher cycle rate. Modules for specific pouch properties such as zipper, spout, gusset shape can be integrated, optional: batch/date printer, gassing module. Bag detectors checking the correct placement and complete opening of the doypack. The product infeed chute allows immediate pouch filling after the pouch is detected and keeps the sealing area free from contamination at the same time. A special gripper system ensures the right position of the doypack during the filling process before the bag is closed and sealed. MITSUBISHI PLC, SMC vacuum filter, OMRON PID temperature control, AIRTAC-cylinder. - Specifications: stainless steel version (SS304) | max. speed of the machine in neutral: 25 cycles/minute | bag width: 100-300mm | bag length: 100-350mm | compress ...
Horizontal packaging machine, MINI VERSION, for premade doypacks, block bottom pouches, flat pouches. Modules for specific pouch properties such as zipper, spout, gusset shape can be integrated, optional: batch/date printer, gassing module. Bag detectors checking the correct placement and complete opening of the doypack. The product infeed chute allows immediate pouch filling after the pouch is detected and keeps the sealing area free from contamination at the same time. A special gripper system ensures the right position of the doypack during the filling process before the bag is closed and sealed. MITSUBISHI PLC, SMC vacuum filter, OMRON PID temperature control, AIRTAC-cylinder - Specifications: stainless steel version (SS304) | max. speed of the machine in neutral: 10 cycles/minute | bag width: 250-450mm | bag length: 250-500mm | compressed air: 0.2m?/min, 6.5bar | power: 220V, 1 phas ...
Horizontal packaging machine, MINI VERSION, for premade doypacks, block bottom pouches, flat pouches. Modules for specific pouch properties such as zipper, spout, gusset shape can be integrated, optional: batch/date printer, gassing module. Bag detectors checking the correct placement and complete opening of the doypack. The product infeed chute allows immediate pouch filling after the pouch is detected and keeps the sealing area free from contamination at the same time. A special gripper system ensures the right position of the doypack during the filling process before the bag is closed and sealed. MITSUBISHI PLC, SMC vacuum filter, OMRON PID temperature control, AIRTAC-cylinder. - Specifications: stainless steel version (SS304) | max. speed of the machine in neutral: 7 cycles/minute | bag width: 100-300mm | bag length: 100-350mm | compressed air: 0.2m?/min, 6.5bar | power: 220V, 1kW, 1 ...
Sewing module to be added behind large FILLINGmachines. To close large paper bags with an additional strip of paper for a stronger seam. Inclusive 2.300mm roller belt. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Sewing module to be added behind large FILLINGmachines. To close large paper bags with a normal seam. Inclusive 2.300mm roller belt. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Fully automatic production line for the manufacture of FFP2 dust masks (KN95). Stable and efficient production of single-use dusk masks with FFP2 protection class (KN95) and made of 4-5 layers of material. Production procedure: Material feeding from roll (up to 5 layers) | feeding, cutting and ultrasonic welding of the nose-bridge | ultrasonic welding of the ear strap | folding and shaping of the mask | ultrasonic welding of the mask edges | punching (separating) and ejection. The tension of the feed materials can be controlled separately for each material. By changing the templates, masks of different sizes and styles can be produced. Controlled by Mitsubishi PLC, operation via Weinview touch screen. - Specifications: max. speed of the machine in neutral: 60 cycles/minute | power: 8kW, 220V | machine dimensions L6000xW1000xH1800mm | weight: 1500kg. Video on YouTube:
Fully automatic production line for the manufacture of surgical masks. Stable and efficient production of single-use surgical masks made of 3-4 layers of material. After welding the layers on top of each other, the production for welding the ear straps is expanded to 2 lines to achieve a constant high output. PLC control, operation via touch screen. - Specifications: max. speed of the machine in neutral: 65 cycles/minute (corresponds to 130 masks/minute) | mask dimensions: L175xW95mm | power: 9kW, 220V | machine dimensions L6500xW4500xH1900mm | weight: 1800kg. Video on YouTube:
MUNK Günzburger Steigtechnik 303406 Aluminum access ladder machine crossing with platform (bridge) 1900-750-2500 RA2414 Technical data: Manufacturer: Munk Günzburger Steigtechnik Type: machine crossing with pedestal Condition: very good (used) Total size: 1900-750-2500 mm (WxDxH incl. handrail) step dimensions: 85 x 600 x 45 mm step/tread height: 230 mm platform dimensions: 800 x 650 mm Platform height: 1350 mm bottom edge 1420 top edge Steps: 6 (5 steps + platform on each side) Maximum working height: 3450 mm maximum load: 150 kg Weight: 38 kg Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag ...
Load capacity 70 kg Fork mount with rectangular tubes, tube centre distance 368 mm, tube length 435 mm Lifting height max. 1,540 mm (floor to lower edge of tube) Parking brake Mobile Next VDE test 03/25 Electrically rechargeable with charger 230V/50Hz
Dough machine stainless steel version Eberhardt Model: S 160 Kneading machine mobile with brake 2 LED timers Spiral mixer with 2 gears LED temperature indicator for max. 160 kg dough depending on the TA Flour dust hood only DGUV V3 tested by us Connection: 400 V, 8.55 kW, 20.5 A, 32A-CEE plug Used machine overhauled 3 months warranty + spare parts service Option: Service Package Maintenance contract Instruction & Commissioning Visit our large spiral mixer exhibition!
MANOTRAD Dough divider for traditional handicraft products for exceptional bread/pastry quality Robust dough divider for flexible use Press plate, cutting and punching grid can be easily replaced Manual dividing and shaping of dough from direct processing to long-term management Pull-out holder for the dough tray Device is space-saving and can store 4 inserts No power connection necessary, maintenance-free New device Standard with: 1 cutting grid, 1 punching grid, 1 dough tub, 1 flour container, 2 silicone pads We have many more bakery equipment in stock!
Key data: 380 mm, 575 mm, 5000 1/min
Smooth G control Travel X/Y/Z/W 230/100/625/575 mm Main spindle Max. speed 5,000 rpm Main spindle spindle nose A2-6 Sub-spindle Max. speed 6,000 rpm Sub-spindle spindle nose A2-5 16-cavity tool turret, VDI 16 driven tool stations 5.5 kW Max. speed ang. Tools: 5,000 rpm Toolsetter Parts catcher Full C-axis on main and counter spindle Cylinder interpolation Synch. Tapping Preparation Renishaw OMP Conveyor Interface for bar feeder 15 bar high pressure pump
Martin T25 Swivel spindle milling machine with 5 axis control Brand: Martin Type: T25 M-No.: V252368 Year of Make: 1998 Engine power: 7.5/9.5 kW or 10/13 hp, 2 speeds Dalander engine Swivel milling spindle: -5° to +45° Milling mandrel: ø30 mm Spindle mount: ISO quick-change system with 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Table size: Table extension 2,400 mm and table widening (=extendable support) Control panel: CNC control at eye level with LCD screen Spindle height CNC-controlled electromotive spindle height adjustment (program controlled or manual control) Tilt -5° - +45° CNC-controlled electromotive angle adjustment (program controlled or manual control) Stops: CNC-controlled electromotive adjustment of the two stops in relation to the milling mandrel (program controlled or manual control) CNC-controlled electr ...
maximum number of results exceeded
please refine your search
