m 91 used for sale

Lump crusher BÜHLER MBP 2015 in good condition 4 kw with 119 rpm Belt drive ø235 : 460, n= 61 rpm, cleaned, tested, test run carried out in our specialist workshop mounted on steel frame

BUSELLATO machining center model JET MASTER 5WF XL with 5 axes: - useful axis stroke 5500 x 1900 mm - Useful working range 4650 x 1555 mm - workpiece passage 240 mm (data to be verified) - automatic tables with CNC positioning - 8 bars each with 4 suction cups, and 2 vacuum pumps - with 4 lifts - devices for load assistance - with front safety mats and integrated scrap unloading belt - GENESIS EVOLUTION electronic control with PC/PLC, based on Windows operating system and with 3D editor (CAD – DXF – XLS files) - total installed power KW 25, volt 380 - machine according to CE standards, year 2007 Operating units: - 5-axis milling unit, with: electrospindle with power KW 14, HSK63F connection 24-position rear tool magazine 2-position side magazine, for blade unit and for Large tool - TFR18 drilling unit, power KW 1.7, with: 7 X vertical mandines  ...

Key data: 400 mm, 1000 mm

Pinacho Mustang 200 - CNC lathe - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-cavity tool turret - Year of construction 2001 Specifications Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm - Bed width: 300 mm Headstock: - Bore main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: MK5 - Spindle speeds: 2 - Constant cutting speed: 0-750 / 750-3000 rpm Feeds: - Working thrust Z/X: 0 - 7000 mm/min - Rapid traverses Z/X: 10 m/min Tailstock: - Tailstock Ø: 58 mm - Tailstock shaft travel: 155 mm - Morse taper tailstock: 4 Engines: - Power main motor: 7.5 kW - Power DC motor Z-axis: 6.8 Nm - Power DC motor X-axis: 3.4 Nm - Motor pump power: 0.57 ...

Folding machine MBO T 530-53/4/4 R; cleaned and tested; Working width 530mm; Roller diameter 40mm; round pile feeder; 1.Movement 4 pockets with 2 knife shafts; 2.Movement 4 pockets with 2 knife shafts; smallest fold 36mm; 2 machines available. Folding machine MBO T 530-53/4/4 R; cleaned and checked; working width 530mm; diameter of rollers 40mm; round pile feeder; first unit four pockets with two knife rollers; secound unit four rollers with two knife rollers; smalest fold 36mm; two machines on stock.

Distance between points: 500 mm, Height of points: 100 mm, Ø of the grinding wheel: 300 mm, Normal grinding wheel width: 25 mm, Maximum usable width of the grinding wheel: 50 mm, Grinding wheel hole: 127 mm, Workpiece holder head: 75-110-150-220-275-375-550-750 rpm, Tilt table in degrees: 8º, Hydraulic table speed: 0.10/6 m/min, Automatic fast forward: 20 mm, Advance in depth: 0.10 to 1 mm, Plongee feed rate: 0.10-5 mm/min, Fine-tuning time regulation in seconds: 60s, Workpiece holder head motor: 2 speeds: 0.38/0.55 HP, Motor head for grinding wheels: 3 CV, Hydraulic pump motor: 0.5 HP, Cooling pump motor: 0.10 HP, Internal grinding apparatus: 0.75 HP, Points: Morse 4 and 3, Weight approx.: 1600 Kg

Key data: 800 mm, 650 mm, 500 mm

CNC Vertical Machining Center MIKRON VCP 800 W With track control Heidenhain iTNC 530 Year of Make: 2002 Travel: X 800 Y 650 Z 500 Speed range: 0 – 20,000 rpm infinitely variable With the following accessories: Rigid angle table 900 mm x 600 mm clamping surface Vertical tool changer with 30 magazine positions ( HSK 63 ) Full protection cabin with sliding doors and interior lighting Electronic handwheel Tool measurement in the work area ( BLUM Laser ) 3 D Probe Infrared Renishaw Conveyor Coolant Setup 4 Height Adjustable Machine Shoes Operating instructions

Frequency-controlled drive motor Drive test bench Power 110 KW Voltage 400 V Speed 1500 to 5000 rpm adjustable motor with -Frequency - Incremental encoder, mains choke, mains filter - External fans Emergency Out Facility Hand control unit Frequency: Type: VCD 4 S 160A AZ/NS Serial Number: BKQ4S160AN20A-1 Output power: 207 KVA Motor power up to 160 KW Total weight approx. 1000 kg

Key data: 300 mm, 570 mm, 5000 1/min

Machine Details Stock-No. 1105-04044 Type of machine CNC Lathe Make MAZAK Type QT NEXUS 200 Year of manufacture 2009 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time immediately Freight basis ex work Technical details turning diameter 350 mm turning length 575 mm Diameter bar 76 mm swing dia. 475 mm control Mazatrol Fusion 640 T X-Axis 190 mm Z-AXIS 570 mm total power requirement 26/22 kW weight of the machine approx. 5 t dimensions of the machine approx. 3.4 x 1.8 x 1.9 m Additional information mazatrol fusion 640 t 2 AXIS tool eyes chip convoyer tailstock

max. turning diameter 500 mm max. turning length 1400 mm 12-station turret not driven

MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindl ...

Vertical machining center LEADWELL MCV 610 CR CNC Fanuc 0M X 610 Y 510 Z 410 6000RPM ISO 40 The machine is in our warehouse in Gussago BS, under power Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with multiple axes of motion and a automatic tool exchange system and sometimes multiple pallets, X axis: 610, Y axis: 510, Z axis: 410, CNC type: Fanuc, Spindle revolutions: 6000

MAS VR5A, Radial drill, 1500mm arm, MT 4, low price, Can be inspected under power in our warehouse, Arm : 1600mm, Weight : Weight 3,7 Ton, Spindelmotor: 4 kW - 28 - 2500 RPM, Clamiping area : 1800 x 1000, Max dia in steel : 50mm, Max dia in cast iron: 60mm, Max threading in steel : M30, Max threading in cast iron : M42, Distance table spindle nose : 1600 mm

5 axis machininng center (milling/turning from bar), Under power in our warehouse, MAKE CHIRON, MODEL MILL 800 5 axis, CNC Fanuc 18iMBS (5 simoultaneous axis 1), X, Y, Z (mm) 800 – 500 - 550, Rapids (Highspeed) 60 m/min, Swivelling head CNC controlled (B axis) +/- 100°, Turning spindle Peiseler, Milling spindle 12.000 giri / 140 Nm (v nota 2), Tools 65, Tool type HSK-A 63 DIN 69893, Tool-change time 1,5 sec (v nota 3), Table 1400x500, Max table load 1200 kgs, Coolant through spindle 70 bar (see note 4), CNC controlled clamping/rotating unit for 6th face machining (v. nota 5), Pressurised linear encoders, Swarf conveyor, Renishaw-ready, Y.O.M. 2006, Weight 7500 kgs, Turning package, Max dia 65mm, RPM: 15 / 4500, Max 42,5 KW / 90 Nm., Hydraulic clamping 800 Nm., Bar loader ILS-RBK- 10012 65, Diameters min/max 5/65 mm L= 600-1200 mm, Highspeed (2), 60m/min., Spindle 20-12.000 min.â ...

DECKEL S11, universal tool & cutter grinder, under power in our warehouse, Mimu machine-tools (Italy)

MELCHIORRE Sp3 / 600 4 rings copper plate, rings with ceramic inserts, diamond lapping lapping machine Under power in our warehouse in Gussago BS Mimu machine tools, Lapping is a [machining](en.wikipedia.org/wiki/Machining) process in which two surfaces are rubbed together with an [abrasive](en.wikipedia.org/wiki/Abrasive) between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called [grinding](en.wikipedia.org/wiki/Grinding_machine)), involves rubbing a brittle material such as [glass](en.wikipedia.org/wiki/Glass) against a surface such as [iron](en.wikipedia.org/wiki/Iron) or glass itself (also known as the lap or grinding tool) with an abrasive such as [aluminum oxide](en.wikipedia.org/wiki/Aluminum_oxide), [jewellers rouge](en.wikipedia.org/wiki/Jeweller%27s_rouge), [opticians rouge](en.wikipedia.org/wiki/Cerium(IV)_oxide ...

Key data: 600 mm, 525 mm, 200 mm

Tool Milling Machine - Universal DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial No.033 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled Machine is sold as a defect

Key data: 600 mm, 525 mm, 500 mm

Tool Milling Machine - Universal DECKEL-MAHO DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial no.023 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled

Key data: 2500 kN, 618 g/PS, 60 mm

Krauss Maffei 250-1400CX Injection Molding Machine with Robot and Gas Boost (225) Item number: 225 Availability: In stock Year of Make: 2016 Brand: KRAUSS MAFFEI Specifications Injection weight: 618 g Injection flow: 848 cc/s Clamping force: 2,500 kN Screw diameter: 60 mm Spray pressure: 2005 bar Tiebar spacing: 630x630 mm Clamping plate size: 1135x1180 mm Tool installation height min.: 330 mm Plate spacing max: 1150 mm Control: MC6 Language: German Power: 70 kW Hours: 23170 h Weight: 15000 kg Dimensions: 6.5x2.3x2.3 m Funnel: No Core Pull: Yes Euromap: Yes Air Valve: Yes Heating Ducts: Yes Gas storage: Yes

Key data: 600 mm, 525 mm, 500 mm

Tool Milling Machine - Universal DECKEL-MAHO DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial.no.063 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled

Key data: 710 mm, 520 mm, 520 mm

TECHNICAL DETAILS X-axis travel:710 mm Y-axis travel:520 mm Z-axis travel:520 mm Rapid traverse X-axis:30 m/min Y-axis rapid traverse:30 m/min Rapid traverse Z-axis:30 m/min X-axis feed speed:10 m/min Y-axis feed speed:10 m/min Z-axis feed speed:10 m/min Overall height:3,300 mm Overall length:4,600 mm Overall width:5,500 mm Total weight:6,000 kg Spindle speed (min.):20 rpm Spindle speed (max.):12,000 rpm Spindle motor power:25,000 W Input voltage:400 V Type of input current:three-phase Work table length:700 mm Worktable width:500 mm

Two (2) Surplus/Never used, Mobile Substations 25/30 MVA, 115/13.8 kV. 60 Hz. 3 Phase, with ODTF1/ODAF2 cooling, YNd1 Connection, Cooper Windings, on a low bed chassis trailer, HV Surge arrester, High Capacitive Voltage transformer, 145 kV Hybrid Switchgear, Outdoor Circuit Breaker Roof Bushing, Control and Protection Panel, Battery Charger, Batteries and all the auxiliary equipment for this substation.

x-travel: 700 mm y-travel: 600 mm z-travel: 600 mm table surface area: 630 mm : 360 Grad angle of table min./max.: 45/20 Grad turning speeds: 6300 U/min control: Pfilips type: CNC 432 Tool changer: spindle taper ISO: 40 chip conveyor: total power requirement: 27 KVA weight of the machine ca.: 5,8 t dimensions of the machine ca.: 4,1x2,3x2,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 710 mm y-travel: 510 mm z-travel: 510 mm Control: Mazatrol M 32 size of pallet: 500x500 mm spindle taper ISO: 40 turning speeds: 50-10000 U/min Spindle capacity: 7,35 KW tool magazin:: 60 Cooling through the spindle: bar numbers of pallets: 6 total power requirement: kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 600 mm gear width: 150 mm max. module: 15 min. module: 1 clamping length min.: 45 mm clamping length max.: 750 mm workpiece weight: 150 kg total power requirement: kW weight of the machine ca.: 0,55 t dimensions of the machine ca.: 1,2x0,8x1,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Motor circuit breaker, lockable, with auxiliary switch KLÖCKNER-MOELLER PKZM1-1.0 ( PKZM110 ) 0.6 - 1.0 A 660 V auxiliary switch: NHi10 3.5 A 500 V spare part for TRAUB TND300 ! used, tested !' Dimensions: 85 x 55 x 90 mm

Contactor MOELLER DIL M50 DIL M(C)50 22 KW 400 V Control voltage: 24 V DC used, tested ! Dimensions: 140 x 130 x 100 mm

Contactor with motor protection relay MOELLER DIL EM-10-G ( DILEM10G ) 4 KW 400 V Control voltage: 24 V DC Motor protection relay: ZE - 1.6 1.0 - 1.6 A used, tested ! Dimensions: 115 x 45 x 55 mm

Contactor with motor protection relay MOELLER DIL EM-10-G ( DILEM10G ) 4 KW 400 V Control voltage: 24 V DC Motor protection relay: ZE - 2.4 1.6 - 2.4 A used, tested ! Dimensions: 115 x 45 x 55 mm

Motor protection relays, overload monitoring of EEx e-motors KLÖCKNER-MOELLER Z5-100/KK4 70 - 100 A New ! Dimensions: 135 x 120 x 120 mm

Motor Circuit Breaker KLÖCKNER-MOELLER PKZM3-25 16 - 25 A 220 - 660 V spare part for Toyoda HES52 ! used, tested ! Dimensions: 110 x 85 x 135 mm

Motor Circuit Breaker MOELLER PKZM4-63 55 - 63 A 690 V used ! Dimensions: 140 x 55 x 160 mm

Stepper motor MEZ NACHOD, ZSE PRAHA type Z42RS145 1.88 Nm 1.8 degrees/step 7.0 A 830 Hz flange: 95 x 95 mm shaft: Ø 8 / 9 mm New !' Dimensions: 180 x 95 x 120 mm

Gear Motor with Brake ORIENTAL MOTOR 5GU12.5KB / 5RK90GU-CMF2 ( 5GU12.5KB /5RK90GU-CMF2 ) 1250 / 1500 rpm 200 V Dimensions 300 x 160 x 120 mm

Geared Motor ORIENTAL MOTOR BO213-444 220 V Dimensions 220 x 120 x 80 mm

Three-phase electric motor DUTCHI NL Type: DM 160 M2 ( DM160M2 ) Power: 11 kW Speed: 2935 rpm Voltage: 230/ 400 V amperage: 35.3/ 20.4 A New !' frequency: 50 Hz/ 60 Hz degree of protection: IP55 with flange

Three-phase electric motor with brake ORIENTAL MOTOR 51K90GU - SWM ( 51K90GU-SWM ) 90 W 1300 rpm 200 V 3AC 50 Hz 60 Hz - Operation is possible ! Shaft with gear: Diameter: Ø 11 mm, Length: 20 mm, Teeth: 10 Flange: Ø 83 mm / 90 x 90 mm Bolt circle diameter: Ø 104 mm Hole diameter: Ø 7 mm approx. 0.5 m Connection cable Used, tested ! Dimensions: 200 x 107 x 92 mm

Height measuring and scribing device digital, height ripper MITUTOYO up to 600 mm 192-614 445152 Dimensions: 805 x 180 x 120 mm

Height measuring and marking device digital, height ripper MITUTOYO up to 1000 mm 192-614 Dimensions: 1230 x 290 x 150 mm

Surface reference plates, roughness measures MASSI end milling machines TGL 4763 Rz 6.3 μm - Rz 80 μm in wooden box used, tested ! Dimensions: 345 x 125 x 35 mm

Coordinate measuring machine MITUTOYO BH 305 measuring area: approx. 650 x 500 mm untested ! without measuring technology, computer, software, probe ! Dimensions: 1090 x 840 x 1900 mm

Surface comparison plate set, roughness measures MASSI Planing, face milling, turning TGL 4763 Planing: Rz 6,Rz 3 μm - Rz 160 μm Face milling: Rz 6.3 μm - Rz 80 μm Turning: Rz 3.2 μm - Rz 80 μm in 3 wooden boxes used, tested ! Dimensions: 345 x 125 x 105 mm

plate thickness: 1,2 mm 0: 62 mm weight of the machine ca.: 50 kg Producer: Sahinler Type: IK 1,2 YOM: new Shaft Length: 140 mm Bordering Capacity: 1,2 mm Roll-Ø: 62 mm Throat Depth: 100 mm Dimensions of the Machine (LxWxH): 560 x 220 x 500 mm Weight: 50 kg Additional information: • Cast iron heavy duty main frame • Forward-backward adjustable sheet support • Easy to carry for workshops • Forward-backward adjustable bottom shaft • Rolls shafts are special steel material • 7 set of rolls standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1,25 mm Shank diameter: 26 mm weight of the machine ca.: 50 kg Sheet thickness: 1.25 mm Roller shaft color: 62 mm Roller center distance: 250 mm Shaft-Ø: 26 Throat Depth: 260 mm Dimensions of the Machine: Length: 600 mm Height: 550 mm Width: 350 mm Weight: about 50 kg incl. standard rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 0,8 mm 0: 52 mm weight of the machine ca.: 30 kg Producer: Sahinler Type: IK 0,8 YOM: new Shaft Length: 110 mm Bordering Capacity: 0,8 mm Roll-Ø: 52 mm Throat Depth: 80 mm Dimensions of the Machine (LxWxH): 380 x 180 x 380 mm Weight: 30 kg Additional information: • Cast iron heavy duty main frame • Forward-backward adjustable sheet support • Easy to carry for workshops • Forward-backward adjustable bottom shaft • Rolls shafts are special steel material • 7 set of rolls standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 600 mm z-travel: 460 mm total power requirement: 4 kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A used electric deck oven Wachtel Piccolo I-4 with 4 shelves each 80x60cm is functionally tested for sale and immediately available. The oven is equipped with exhaust hood and proofer. Shipping costs on request. Deck Oven Quail Piccolo I-4 Master - 4 shelves each 80x60cm - Each floor with separate controls - Top and bottom heat can be controlled separately - Each floor with a separate steam box for the generation of steam - With automatic night start function - With exhaust hood - Stove with water connection for steam - with proofer - Floor height see picture -Dimensions: Width 118cm Depth: 114cm (+47cm hood) Height: 192cm (+25cm hood) Height is adjustable - Floor entrance height: 16cm - 20.32kW - Voltage: 400V AC/3Ph/N/PE/50Hz - Year of construction 09 / 2015

- New / unused BHS Sonthofen gearbox units - Individual offers possible Pos. 01) FLENDER BA 6610TU (worm gear) - Type: CFA 250 - Drive speed: 870 rpm - Output speed: 24.86 rpm - Ascending to the right - Wavelength: 105 mm - Shaft diameter: 65 mm ------------ Pos. 02) FLENDER BA 6610TU (worm gear) - Type: CFA 250 - Drive speed: 870 rpm - Output speed: 24.86 rpm - Left Ascending - Wavelength: 105 mm - Shaft diameter: 65 mm ------------ Item 03 FLENDER BA 6610TU (worm gear) - Type: CFA 250 - Drive speed: 870 rpm - Output speed: 24.86 rpm - Ascending to the right - Wavelength: 105 mm - Shaft diameter: 65 mm ------------ Item 04) FLENDER BA 6610TU (worm gear) - Type: CFA 250 - Drive speed: 870 rpm - Output speed: 24.86 rpm - Left Ascending - Wavelength: 105 mm - Shaft diameter: 65 mm ------------ Pos. 05) FLENDER BA 6610TU (worm gear) - Type: CFA 250 - D ...

Machine type: MIG/MAG welding machine Make MERKLE Type RedMIG 3000 K Appendix No. 132.175 Connection voltage 3 x 400 volts Adjustment range 25 – 280 amps Duty cycle 35% ED at 280 amps 60% ED at 240 amps Current setting 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 4-roller drive DV 26 Fuse 16 Ampere Dimensions L x W x H 940 x 445 x 760 mm Weight 120 kg Age 3 years Condition workshop tested, very good, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, complete Equipped 1 pair of welding gloves 1 Piece Instruction Manual Warranty 24 months from ...

Cone Mixer, Conical Screw Mixer V-MIX Mixer Type 25.000, -Usable volume approx. 22,500 liters - Adaptation to all bulk weights -Containers and lid parts made of stainless steel -Hollow transmission shaft and gearbox cover to the inside of the container made of V2A -Swivel arm made of stainless steel -Mixing screw consisting of mild steel clad in stainless steel -Pneumatically driven side spout made of stainless steel - ATEX version possible -Drive motors manufacturer Nord -All lubricants are H1 and Halal approved and certified

Cone Mixer, Conical Screw Mixer V-MIX Mixer Type 44.000, -Usable volume approx. 36,000 litres -Max product weight : 27.500 kg -Adaptation to all bulk weights -Containers and lid parts made of stainless steel -Hollow transmission shaft and gearbox cover to the inside of the container made of V2A -Swivel arm made of stainless steel -Mixing screw consisting of mild steel clad in stainless steel -Pneumatically driven side spout made of stainless steel - ATEX version possible -Drive motors manufacturer Nord -All lubricants are H1 and Halal approved and certified