m 91 used for sale

WE OFFER VERY NICE CONDITION - MIKRON WF3 S technical details: X-travel longitudinal 500 mm Y-travel cross 500 mm Z-travel vertical 380 mm spindle speed 12-steps 50-2240 UpM /rpm feed 1-750 mm/min spindle taper SK40 table size 800x445 mm drive capacity 7 kW weight 1650 kg

PLATEN SIZES: 2200 X 2100MM MIN MOULD HEIGHT: 650MM MOULD OPENING STROKE: 1600MM MAX DAYLIGHT: 3000MM EJECTOR STROKE: 400MM SCREW DIAMETER: 120MM INJECTION PRESSURE: 1500BAR STROKE VOLUME: 6107CM3 CONTROLS: SEF 2000 TOUCH SCREEN MOTOR: 90KW HEATING CAPACITY: 60.9KW SCREW DRIVE: HYDRAULIC CORE PULLING: 2 AIR VALVE: 2

Machine type MIG/MAG inverter welding system Brand Mahe Type Eco MIG 300 Digital Supply voltage 3 x 400 volts Setting range 10 – 300 amperes Duty cycle 40 % ED at 300 amps 60% ED at 240 amps Current adjustment infinitely variable incl. wire automatic Cooling inverter by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feed gearbox 4-roller gearbox Fuse 16 Ampere Dimensions L x W x H 880 x 400 x 635 mm Special accessories wire switch without power for threading TIG DC, without RF Rod electrodes weldable Weight 34 kg Age as good as new Condition workshop tested, as new, incl. UVV workshop test report Scope of delivery welding system with the following accessories 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long 1 piece pressure reducer argon with 2 pressure gauges 1 roll of weldin ...

Machine type MIG/MAG inverter welding system Brand Mahe Type Eco MIG 300 Analog Supply voltage 3 x 400 volts Setting range 10 – 300 amperes Duty cycle 30 % ED at 300 amps 60% ED at 240 amps Current setting 12 switching stages Cooling inverter by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 4-roller drive Fuse 16 Ampere Dimensions L x W x H 880 x 400 x 635 mm Special accessories wire switch without power for threading Rod electrodes weldable Weight 34 kg Age as good as new Condition workshop tested, like new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can non-stick spray 1 piece spare parts box, k ...

VEAGOO MACHINE VT-210X packaging machine was manufactured in 2020 in China. Characterised by its simple operation and reliability, the machine is designed for packing products i.e. disposable gloves or masks in bags made of various types of plastic. Highly efficient operation is achieved thanks to the used components and technology, saving time and materials. The VT-210X packaging line automatically determines the cutting length of the bags, then packs them with products with a maximum height of 85 mm, and at the end seals the pack very carefully. Depending on the size of the product being packed, the packaging machine is capable of producing up to a maximum of 150 bags per minute. The packaging machine is equipped with, among others, a PANASONIC PLC control and a YATAI temperature controller. The total weight of the machine is 650 kg. Technical specifications of the VEAGOO MACHINE ...

Four-side planer with 4 planing heads •Powerful with 4 motors Hsvwvkytm Voltage 400 V / 3 / 50 Hz Motor power 17,1 kW finished workpiece width 180 mm min. finished workpiece width 25 mm finished workpiece thickness 105 mm min. finished workpiece thickness 10 mm min. length of the workpiece - for single feed 350 mm - at group feed 250 mm Number of working spindles 4 Spindle speed 6000 min-1 Spindle diameter 40 mm Cutterhead diameter 120 mm Length of horizontal spindles 190 mm Length of vertical spindles 120 mm Feed speed 6; 12 m/min Diameter of feed rollers 120 mm Length of feed table 1700 mm Distance of the feed table from the floor 920 mm Quick adjustment of the feed table and ruler 10 mm Weight 1000 kg

Manufacturer: Arburg Type: 320 C 500 - 150 Year of production: 2000 Control: Selogica Closing type: Hydraulic Closing force: 500 kN Tie bar spacing: 320 mm x 320 mm Plate size: 498 mm x 498 mm Tool height: min 225 mm Opening distance: 350 mm Plate spacing max.: 575 mm Screw: 35 mm Stroke volume: 106 ccm / 89 gram PS Injection pressure: 1610 bar General Motor: 15 kW Heating: 4,8 kW Dimensions: 3.4 m x 1.4 m x 1.7 m Weight: 2250 kg Screen text: German Additional equipment: Machine with handling Multilift Robotinterface Core pull hydraulic: x1 Air valve: Yes Tool heater x 6 Conveyor

Gear motor, electric motor -Speed: 82 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: -Dimensions: 390/210/H180 mm -Weight: 15 kg

Gear motor, electric motor -Speed: 63 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter shaft: Ø 14 mm -Protection class: IP 54 -Dimensions: 275/140/H184 mm -Weight: 8.8 kg

Shredder mill with blades brand: Eurotecno, model: MCV 120 653, cutting chamber: 1170x700 mm. open rotor inclined cut, hydraulic hopper opening and grill. Engine: 75 hp

Shredder mill with blades Brand: Maquiplast. Cutting chamber: 1000x800 mm with 5 rows of blades on the rotor. Motor: 125 hp and electrical panel.

Morse taper sleeve, tool holder, morse taper, morse cone, taper sleeve, adapter - Adapter for the cone in the chuck of a lathe -External mount: MK6 -Number: 6x recordings available -5x recording: inside tool MK5 -1x recording: inside tool MK3 -Price per piece -Weight: about 1.7kg/pcs

Morse taper sleeve, tool holder, morse taper, morse cone, taper sleeve, adapter - Adapter for the cone in the chuck of a lathe -External mount: MK5 -Number: 7x recordings available -3x recording: inside tool MK4 -4x recording: inside tool MK3 -Price per piece -Weight: about 0.6kg/pcs

Magazzino DANOBAT 3 mt. 15 postazioni Circa 15 aanni

Shredder mill with blades Brand: Mateu I Solé, model: B-40, cutting chamber: 700x530 mm, motor: 30 Kw (40 hp), year: 1998. Step rotor, vacuum cleaner: 1.5 Kw (2 hp) and silo: 2,000 L. With electrical panel.

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter -Adapter for the cone in the chuck of a lathe -Outside mount: MK8 (Ø80 mm to Ø75 mm) -Number: 10x recordings available -2x holder: inside tool MK6 -6x holder: inside tool MK5 -Price: per piece

Sewingmachine Make Müller Martini Model FK-I1-S Year 1960 Min. size 40 x 60 Max size 250 x 440 mm Stitches 1-8 Details Independend thread tensioning, cutting function

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: CD6000 MC; Year of production 1997; SKIN packing machine; Working only with hard foil; Incomplete machine (see photos) Bottom foil: +/- 460 mm (approx); Upper foil: +/- 450 mm (approx); Molding length: 492mm; Forming width: 408mm; Molding depth: 15mm; Formats: 3.2; Length: 7200 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1700 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R5200; Year of production 1989; Working with soft or hard foil; Bottom foil: +/- 420 mm (approx); Upper foil: +/- 415 mm (approx); Molding length: 182mm; Forming width: 370 mm; Molding depth: 70mm; Formats: 3.1; Length: 5800 mm; Width: 1000 mm; Height: 1800 mm; Weight: 1400 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R230; Year of production 2002; Machine designed for packing sandwiches; Working only with hard foil; Bottom foil: +/- 320 mm (approx); Upper foil: +/- 315 mm (approx); Molding length: 165mm; Forming width: 80mm; Molding depth: 80mm; Formats: 3.1; Length: 5800 mm; Width: 1000 mm; Height: 2100 mm; Weight: 1500 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R270 CD; Year of production 2004; SKIN packing machine; Working only with hard foil; Bottom foil: +/- 420 mm (approx); Upper foil: +/- 415 mm (approx); Molding length: 244mm; Forming width: 364 mm; Molding depth: 80mm; Formats: 2.1; Length: 6800 mm; Width: 1100 mm; Height: 2100 mm; Weight: 1600 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R530; Year of production 1996; Working only with hard foil; Bottom foil: +/- 465 mm (approx); Upper foil: +/- 455 mm (approx); Molding length: 192mm; Forming width: 404mm; Molding depth: 40mm; Formats: 4.2; Length: 7000 mm; Width: 1100 mm; Height: 2100 mm; Weight: 1600 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: CD6000 MC; Year of production 1996; SKIN packing machine; Working only with hard foil; Incomplete machine (see photos) Bottom foil: +/- 460 mm (approx); Upper foil: +/- 450 mm (approx); Molding length: 266mm; Forming width: 408mm; Molding depth: 15mm; Formats: 3.1; Length: 6500 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1600 kg.

Gear motor, electric motor -Speed: 18 rpm -Power: 0.135 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Dimensions: 350/190/H175 mm -Weight: 12 kg

TECHNICAL SPECIFICATIONS Manufacturer: MOGENSEN Designation: Stangensizer / Stangenrost Type: DX3527 Year of construction: 1994 Version: Two-deck Clear length: 3,500 mm Clear width: 2,300 mm Total height: 2,750 mm Rod diameter above: 70 mm Rod diameter bottom: 40 mm Top gap distance: 216 mm Gap distance below: 330 mm SPECIFIC COMMENT - Reappraisal 2020, since then unused - Robust construction - Ideal for coarse separation

Machine type MIG/MAG inverter welding system Make RILAND Type MIG 180PGDM Supply voltage 1 x 230 volts Adjustment range 15 – 180 amperes Duty cycle 20 % ED at 180 amps 60% ED at 110 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable assembly system version Wire feed gearbox 2-roller gearbox Fuse 16 Ampere Dimensions L x W x H 386 x 170 x 300 mm Special accessories TIG welding DC without HF E-welding Weight 8 kg Age 2 years As good as new Scope of delivery welding system with the following accessories: 1 piece welding torch MB 24, 2 mtr. Long 1 piece pressure reducer argon 1 piece ground cable 3 mtr. long, 16 sq m 1 piece electric welding cable 3 mtr. long, 16 sq m 1 piece of aluminum equipment 3 power nozzles aluminum, 1.0 mm Ø 3 pieces of current nozzles stee ...

Key data: 65

Extruder 2 corrotating spindles: 65 mm Ø, 30L/D, brand: Maris, model: TM-65 V. Shirt and spindle compatible by segments. Degasser, motor: 90 KW DC, with variable speed. Thread head and 2 spare spindles.

Morse taper sleeve, tool holder, morse taper, morse cone, taper sleeve, adapter -Adapter -Intake: MK4 -Recording tool: MK1 -Number: 24x recordings available -Price per piece --Weight: 0.55kg/pcs

Morse taper sleeve, tool holder, Morse taper, Morse taper, taper sleeve, adapter -Adapter -Recording: MK4 -Tool holder: MK2 -Number: 27x recordings available -Price: per piece -Minimum order: 3 pieces -Total length: mm -Weight: 0.5 kg/piece

Morse taper sleeve, tool holder, Morse taper, Morse taper, taper sleeve, adapter -Adapter -Recording: MK4 -Tool holder: MK3 -Number: 102x recordings available -Price: per piece -Minimum purchase: 3 pieces -Weight: 0.4 kg/piece

Morse taper sleeve, tool holder, Morse taper, Morse taper, taper sleeve, adapter -Adapter -Recording: MK5 -Tool holder: MK2 -Number: 51x recordings available -Price: per piece -Total length: mm -Weight: 1.5 kg/piece

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter -Adapter -Recording: MK5 -Holder tool: MK3 -Number: 38x recordings available -Price: per piece -Total length: mm -Weight: 1.1 kg/piece

Morse taper sleeve, tool holder, morse taper, morse cone, taper sleeve, adapter -Adapter -Intake: MK6 -Recording tool: MK3 -Number: 3x recordings available -Price per piece -Weight: 4kg/pcs

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter -Adapter -Recording: MK6 -Recording tool: MK4 -Number: 3 recordings available -Price: per piece -Weight: 3.7 kg/piece

Morse taper sleeve, tool holder, Morse taper, Morse taper, taper sleeve, adapter -Adapter -Recording: MK5 -Tool holder: MK4 -Number: 41x recordings available -Price: per piece -Weight: 1 kg/piece

Travel distances: 500 x 450 x 400 mm [ X x Y x Z ] Number of axles: 5 Rotary swivel table HEM 500 U 3+2 Control: Heidenhain iTNC 530 Spindle holder: ISO 40 / BT 40 Spindle speed: 12000 rpm Tool changer: 30 - fold Drive power : 20 kW Torque : 75 Nm Rapid traverse: 30 m/min Spindle cooling Conveyor Diameter 500 mm IKZ 20 bar ITC 5X Intelligent Thermal Control Oil trap Minimum quantity lubrication Oil mist extraction Blowing air through tool screw Mobile handwheel Glass scales Encoder B-axis Encoder C-axis Tool probing system (TS27R OMP40 Probe

Belt moulder for rye bread used good working condition

Coordinate Measuring Machine Brown&Sharpe Model: Microval 454 PFX YOM: 1996 Measuring range X-axis: 457 mm Measuring range Y-axis: 508 mm Measuring range Z-axis: 406 mm Max table loading: 225 kg Machine dimensions (LHW): 895x885x1575 mm

Spiral kneader for 80 kg dough Dust cover stainless steel 2 drives (shell and dough hook separated) Mobile on wheels/ Weight 390 kg Exhibition machine therefore special price

Universal milling angle head, milling angle head -Recording: MK4 -Drive mount: MK5 -Angle head: swiveling -Dimensions: 440/300/H310 mm -Weight: 68 kg

SECOND-HAND SANDING MACHINE FOR TURNED PIECES LOCATELLI MOD. ORIENTAL MATIK 1200 - With automatic loader - No. 2 abrasive belts -Brushes - No. 6 spindles - Working length 1200 mm

Geared motor, electric motor, three-phase motor -Speed: 56 rpm -Power: 0.37 kW -Design: B5 angle -Diameter hollow shaft: Ø 20 mm -Protection rating: IP 54 -Quantity: 1x motors available -Dimensions: 540/330/H220 mm -Weight: 24kg/piece

TECHNICAL SPECIFICATIONS Manufacturer: MicroStep Europe Designation: Plasma cutting machine CNC Type: SPL-P 9001.20+S500 Year of construction: 2008 Design: with KJELLBERG plasma source HiFocus 280i Composed of: - MicroStep CNC guide machine SPL-P 9001.20+S500 - CNC machine control MSNC-500 for WindowsXP - CNC flame cutting table with sectional extraction / 9000x2000 mm - Slag trays for the integrated shaft - Kjellberg plasma source HiFocus 280i, with autom. Gas console - CNC interface for HiFocus 280i

- Pallet feeder FP 95 incl. VACULIFT III - MC Control - 1. Station 4 Niro fold buckles - Perforating, creasing and cutting deivce parallel fold - KL- und SUPER KTL-Version with 2 knifes - Vertical Stacker SBAP 46-ME, Bj. 2016 - Stream delivery ASP 66-2ME, Bj.2012

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.37 kW -Speed range: 190-1000 rpm -Motor: adjustable -Hollow shaft: Ø 14 mm -Construction: B5 -Number: 1 motors available -Price: per piece -Dimensions: 370/190/H215 mm -Weight: 15 kg

Metal detector Safeline V4-wheel Mettler Toledo - Model: V4-RAD - Metal detection - Voltage voltage: 100.240 Vac - Frequency: 50 /60 Hz - Power: 340 W (Max.)

Minimum quantity lubrication, coolant lubrication device, cooling spray device, oil spray device -pneumatic: driven -Tripping: electrical -Oilcontainer -Dimensions: 200/230/H375 mm -Weight: 2 kg

Piston spindle injector, brand: Main Group, model: Mode10 Booster 4, 4 seats. Two injectors, press measurements: 580 X 470, 120 Tn closure, year: 2001.

used spiral kneader Eberhardt Maximat MAAN 160 extendable, completely overhauled, 160 kg dough, 2 watches, with 2 stainless steel boilers, stainless steel spiral, many new parts, new friction wheel, new lifting cylinder, electrics renewed, 380/400 V, 3 phases, 50 Hz, 19.5 A, spiral 7.8 kW, boiler 0.75 kW

format 46 x 66 cm Year of construction 2003 Flat stack feeder Vacustar 1st station: 4 folded sheets downstream knife shaft Noise insulation hood Counting device MS-Control without display Delivery date: immediately from stock Price on request. We deliver and install worldwide!