129,805 used machines on RESALE, but how to find them? Machine Search
Attachment: Schneider air compressor Compressor: UNM STV 460-10-200 t no.: T800-140 Suction power: 460 l / min EFF. Quantity: 375 l / min Final compression pressure: 10 bar Rated motor power: 3 kW Voltage: 400 v Frequency: 50 Hz Year of construction: 2008 Condition: mint condition - very good
used
RAIL LENGTH: 5 - 60 M, CONTINUOUS MEASURING, 6 LASER MEASURING HEADS, SPEED: 1 M/SEC., MODERNISED IN 1992
23 fields pallets shelving (used) -Various manufacturers such as Polypal, Dexion, Metalux, Jungheinrich, Torri, Metasistem, and others -Used pallet racks note 1.5 -24 stand / 64 traverses -Truss length 2.70 m (optional 3,60 m on request) -Load per level 2.4 tons -Shelf height 3.00 m deep 1.00 1.10 m -Disassembled and ready for loading -Safety pins -Load signs On request are surcharge ground anchor and Pad material offered. Attention: It is to used goods. Partial Signs of wear, but no security relevant dents like Stand driven to or Trussing! The magazine planners are careful to create only top quality / to put together. Should the above offer do not meet your needs, we create happy at short notice in writing (pdf. via mail) a quote if necessary including transport costs. For this, we need only your exact address or delivery address. See: your desired shelf there's also à l ...
used
6 STANDS ROD FINISHING BLOCK WITH 3 UPPER & 3 LOWER UNITS IN A V-SHAPE 170 MM DIAMETER DISCS TO PRODUCE DIA. RODS OF 5.5 TO 12 MM, 60 M/SEC.,
used
NEVER INSTALLED! - IS DESIGNED TO USE 170 MM DIAMETER DISCS TO PRODUCE RODS OF DIAMETER 5.5 UP TO 12 MM.
used
size 59 x 74 cm Perfecting 8/0 - 4/4 Color-Pilot-Plus ink control system AIR Center (Rietschle) Technotrans temperation Technotrans combi cooling device with external condensator washing device for printing cylinder Quickstart Low Coverage stabilisation Powder (Hitronic) Inline Observer Optiprint Jackets preparation for colour temperation Non Stop semiautomat delivery Still in operation: Yes Available: sofort
Feeding Station No product feeder 4 product feeders Foil wrapping station End sealing station Outfeed to Stacker Available: sofort
<br>Spinner for ECRM MAKO 46/36 HS, ECRM VR 36/46-HS, 30,000 RPM, with waranty.<br><br>Still in operation: No.<br>Available: Yes
<br>Spinner for ECRM MAKO 46/36,VR45,VR36, 32,000 RPM, refrushed 2012, with waranty.<br><br>Still in operation: Yes<br>Available: Yes
used
<br><br><br>Still in operation: Yes<br>Available: immediately
• continuous feeder • Counter IZVA 342 T 1st parallel folding unit: • working width max. 67 cm • 4 buckle plates • spiral folding rollers • rear-mounted slitter shafts • noise prevention 1st cross-fold unit: • cross fold knife • slitter shaft after cross-fold • spiral folding rollers 2 nd cross fold unit: • cross fold knife left • spiral fold rollers standard accessories: • scoring, perforating and cutting devices for standard Still in operation: No Available: sofort
Properties: Used wheels car converter of manufacturer Mannesmann Demag Feet must be ordered separately Condition: Fully functional with traces of use Ideal for fast material handling Expertly disassembled and packed 7 STK. in stock Price per PCs. Converter Converter with chains or straps gently raise the goods and settle it gently on the goal line. This includes both routes leave during recording and weaning shortly. Technical data: Mass of the roller Overall length: 935mm Total width: 920 mm Information on the role Clamping length: 430 mm Diameter approx: 50 mm Material: Steel, galvanised Information on the framework Frame height: 135 mm Frame width: 30 mm Material: Steel Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unl ...
Key data: 840 , 900
FOR SALE... MAK 6M 282 COMPLETE ENGINE TO WHOM IT MAY CONCERN; WE VE MAK 6M 282 COMPLETE ENGINE AT OUR STOCK. PLS FIND ON BELOW ENGINE DTLS MAK 6M 282 SERIAL NO. 28948 YOB 1982 840 kW REVOLUTION 900 ENGINE READY TO TRANSPORT. EX STOCK-IZMIR / TURKEY PS WE VE SO MANY USED MAJOR PARTS OF THIS TYPE ENGINE AT OUR STOCK. CYLINDER HEADS / PISTONS / CON RODS / LINER / FUEL INJECTION PUMPS / TURBO CHARGER / CAM SHAFTS... ETC EX STOCK READY TO TRANSPORT IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY
AGFA Motor for the cutter of SelectSet 5000. Including Belt. Available: now
Motor for Avantra25 - see all details in the picture. The Motor is out of a well working Avantra25. Available: on stock
Motor for Avantra25 - see all details in the picture. The Motor is out of a well working Avantra25. Available: on stock
Transport Motor for Avantra25 - see all details in the picture. The Motor is out of a well working Avantra25. Available: on stock
Maximum format: 1060 x 770 mm Min. format: 450 x 370 mm max punch format: 1050 Ã? 750 mm Maximum format of embossing: 1050 Ã? 750 mm gripper margin: 8-17 mm paper weights: 90-2000 g / m2 (carton) 0.1-2 mm (box)? 4 mm (corrugated board) maximum punching force: 300 T Maximum speed: 7500 sheets per hour Max marking speed: 6500 sheets / hour individually heated zones: 12 heated zones (each zone can be heated independently up to up to 200 degrees) Max Folienlängsdurchmesser: 250 mm maximum stack height display: 1200 mm maximum stack height investors: 1350 mm Main motor power: 11 kW Machine power: 46 kW Weight: 17,000 kg Air requirement: 0.6 MPa, 0.37 m3/min Dimensions: 6050 x 4200 x 2260 mm
Output-Motor for AccuSet, the Motor is located before the TakeupCassette - see all details in the picture. The Motor is tested and is out of a well working AccuSet. Available: on stock
Supply-Motor for AccuSet, it is the complete unit for an easy change - see all details in the picture. The Motor is tested and is out of a well working AccuSet. Available: on stock
Capstan-Motor for AccuSet - see all details in the picture. The Motor is tested and is out of a well working AccuSet. Available: on stock
The BTS-MF450HD special waste baler is the ideal baler for compacting difficult materials such as PET bottles, food cans and metal containers, big bags, plastic canisters and plastic packaging, but also scrap tyres and car bumpers can be reduced to a minimum of volume with the baler. The special baling press impresses with its ease of use, safe operation and its spacious filling chamber, it is ideal for medium to large amounts of material. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 30 Ton Bale weight: up to 450 kg (material depending) Bale size: 1000 H (var.) x 1200 W x 800 D mm Machine size: 3343 H x 1781 W x 1196 D mm Machine weight: 1600 kg Transport height: 2300 mm Loading aperture: 1200 W ...
The BTS-MF450 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 450 kg. The baling press impresses with its ease of use, safe operation and its spacious filling chamber, it is ideal for medium to large amounts of material. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 30 Ton Bale weight: up to 450 kg (material depending) Bale size: 1000 H (var.) x 1200 W x 800 D mm Machine size: 3000 H x 1781 W x 1196 D mm Machine weight: 1300 kg Transport height: 2300 mm Loading aperture: 1200 W x 680 H mm Cycle times: 40 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Dual cylinders for even compaction of the m ...
The BTS-MF75 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 75 kg. With a can crush insert baler is even suitable for crushing individual sheet metal and plastic containers and also cans. The baling press impresses with its ease of use, safe operation and its large filling volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 3.5 Ton Bale weight: up to 75 kg (material depending) Bale size: 1000 H (var.) x 700 W x 500 D mm Machine size: 2335 H x 1040 W x 750 D mm Machine weight: 278 kg Transport height: 2335 / 1800 mm (on request) Loading aperture: 700 W x 698 H mm Cycle times: 24 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V ...
Kat.Nr. 14-00099 in a very good condition with Outlet Discharge 33.290 Litres in stainless steel in AISI 304 very stable construction Description: outside: marbled – inside: 2B with fermentation lock with manhole 430 x 330 mm with sample valve with clear discharge DN 65 with outlet discharge with welding flange DN 65 with level and scale with ladder rack with flat bottom with outlet discharge manufacturer: Möschle Measurements: Width: 1600 mm Depth: 7200 mm Height: 4000 mm weight: approx.. 2,5 tons All prices are valid ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale
Cat.-No. 14-00100 in a very good condition Description: outside: marbled – inside: 2B with fermentation lock with manhole 430 x 330 mm with sample valve with clear discharge DN 65 with outlet discharge with welding flange DN 65 with level and scale with ladder rack with flat bottom with outlet discharge manufacturer: Möschle Measurements: Width: 1600 mm Depth: 7200 mm Height: 4000 mm weight: approx.. 2,5 tons All prices are valid ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale
used
used
NEW PIV GEAR BOX IN 2006, 6 DECOILERS, MAX. LENGTH: 1400 MM, 70 - 800 GSM Still in operation: No Available: IMMEDIATELY
used
PAPER: 35-250 GSM, WIDTH. 1300 MM, SPEED: 250 MM, ALU-FOIL: 30-100 MICRONS Still in operation: No Available: IMMEDIATELY
used
6-color size 900 MM ROTOPAK 1/S, 50 - 200 GSM, WEB WIDTH: 820 MM, ROLL DIA. 800 MM, Still in operation: Yes Available: IMMEDIATELY
The BTS-MF60HD is the ideal special waste baler for compacting your difficult and hard materials such as cans, PET, metal buckets, metal containers, but also plastic canister and much more recyclable materials can be compacted easily and safe to a minimum of its size. The special waste baler impresses with its ease of use and safe operation, finished bales can be easily removed with the automatic bale ejector. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 13 Ton Bale weight: 25 - 60 kg (material depending) Bale size: 650 H (var.) x 600 W x 400 D mm Machine size: 2144 H x 1267 W x 1328 D mm Machine weight: 706 kg Transport height: 2144 mm Loading aperture: 890 H x 600 W x 400 D mm Cycle times: 2 ...
used
6-color size 900 MM ROTOPAK 1/S, 50 - 200 GSM, WEB WIDTH: 820 MM, ROLL DIA. 800 MM, Still in operation: Yes Available: IMMEDIATELY
used
6-color size 720 mm TYPE: 500, 6 INTAGLIO + 1 FLEXO, PAPER & FOILS 50 - 150 GSM, ROLL DIA. 800 MM WIDTH: 750 MM; Still in operation: Yes Available: IMMEDIATLY
used
DECOIL DIA.: 1000 MM, COILER DIA.: 800 MM, WIDTH: 1000 MM, GRAMMAGE: 180 GSM, Still in operation: No Available: IMMEDIATELY
Collar shelving, double-sided, 5, 18 m high, 1, 20 m arms, 870 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR2.495.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided measures 5.18 m, hot-dip galvanized IPE 180 / 100 with each 2 x 3 verstellb. Poor 1.20 m, 870 kg capacity per arm with associations about 1.30 m Shelf stand double-sided about 5180 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 870 kg each arm / 2610 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us! Photos of a similar rack!
Cat.-No. 14-00101 in a very good condition with Outlet Discharge 33.250 Litres in stainless steel in AISI 304 very stable construction Facilities: Outdoor: marbled inside: 2B with fermentation sheet pile connection with manhole front 430 x 330 mm with tasting cock with clear drain DN 65 Rest end with sealing flange DN 65 with level indicator bar with scale with head holder with flat ground with rest spout pulled forward Manufacturer: Möschle Dimensions: Width: 1600 mm Depth: 7200 mm Height: 4000 mm Weight: approx. 2.5 tons All prices are valid ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale
Cat.-No. 14-00102 in a very good condition with Outlet Discharge 33.200 Litres in stainless steel in AISI 304 very stable construction Description: outside: marbled – inside: 2B with fermentation lock with manhole 430 x 330 mm with sample valve with clear discharge DN 65 with outlet discharge with welding flange DN 65 with level and scale with ladder rack with flat bottom with outlet discharge manufacturer: Möschle Measurements: Width: 1600 mm Depth: 7200 mm Height: 4000 mm weight: approx.. 2,5 tons All prices are valid ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale
Cat.-No. 14-00103 in a very good condition with Outlet Discharge 33.170 Litres in stainless steel in AISI 304 very stable construction Description: outside: marbled – inside: 2B with fermentation lock with manhole 430 x 330 mm with sample valve with clear discharge DN 65 with outlet discharge with welding flange DN 65 with level and scale with ladder rack with flat bottom with outlet discharge manufacturer: Möschle Measurements: Width: 1600 mm Depth: 7200 mm Height: 4000 mm weight: 2,5 tons All prices are valid ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale
Cat.-No. 14-00104 in a very good condition with Outlet Discharge 33.100 Litres in stainless steel in AISI 304 very stable construction Description: outside: marbled – inside: 2B with fermentation lock with manhole 430 x 330 mm with sample valve with clear discharge DN 65 with outlet discharge with welding flange DN 65 with level and scale with ladder rack with flat bottom with outlet discharge manufacturer: Möschle Measurements: Width: 1600 mm Depth: 7200 mm Height: 4000 mm weight: approx.. 2,5 tons All prices are valid ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale
maximum number of results exceeded
please refine your search
