m 520 used for sale

General SKU312X491 LocationBarneveld CEcheck MakePallmann Main Features Motor33 KW Inlet diameter120 mm Specified Features - Fine Impact Mill MaterialStainless steel 1.4552 Fine Impact Mills Turbo cone millcheck 2 Driven rotorscheck Rotor sizeInner roter ø 396 mm: outer roter 400 mm With grinding trackConidur 1,5: 2: 3 Housing dimensions ø 800 mm Inletø 120 mm Motor22 kW 400 V, 1470 rpm: 11 kW 400 V, 1475 rpm SpeedInner rotor 3000 rpm, outer rotor 1500 rpm Information TypePPS 4-120 No.139820170004 Year of construction2018 Mounted on framecheck Floor space0,9 x 2,8 m Total height1,5 m Weight1600 kgFine Impact MillsPallmannMills > Fine Impact MillsBrand > Pallmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine i ...

General SKU379X951 MakeMonTech LocationBarneveld CEcheck TypeD-RPA 3000 Main Features MaterialStainless steel Specified Features - Viscosity test machine Electric capacity230 V MaterialStainless steel Information No.090 KA 666 Year of construction2019 With switchcheck Floorspace0,70 x 0,55 m Total height1,52 m Extra Specifications Machine type: MonTech D-RPA 3000 Dynamic Rubber Process Analyzer (RPA) / advanced rheometer for rubber &: polymers (QC and R&:D). Use: measures viscoelastic and curing behavior (e.g., G’, G’’, tan δ, viscosity, cure kinetics) under controlled temperature, strain and frequency. Temperature range: ambient to 232 °C. Frequency range: 0.001–100 Hz. Strain range: up to 360° (very wide dynamic range). Torque range: up to 250 dNm. Sample volume: approx. 4.5 cm³ (sealed biconical die system). Utilities (typical): compressed air min ...

General SKU399X1180 LocationBarneveld CEcheck MakePLAS MEC S.r.l. Main Features MaterialStainless steel Volume13 Ltr. Motor11 KW Specified Features - Hot mixer Hot/Cold mixercheck Hot mixercheck Capacity10 Ltr. (13 Ltr.) With motorcheck (11 kW) With variable speed drivecheck Rotor speed5 — 50 rpm Manual operated outletcheck MaterialStainless steel 1.4301 (304) Information TypeDMP-13 Year of construction2016 Mounted on framecheck With switchgearcheck (supplied with electrical cabinet & control system: as is) Extra SpecificationsEquipped with an Industrial Frigo WTP 18/140 pressurized water temperature control unit: Temperature range from +10°C up to +140°C for accurate and stable thermal regulation Nominal operating pressure 3.4 bar, with system static pressure 0.5–0.8 bar Hot mixersPlasmecPlastic machinery > Hot mixersBrand > Plasmec What you can expect fr ...

General SKU399X1184 LocationBarneveld CEcheck MakePlas Mec TypeDMP-80 FV Pressure Working pressure5 Bar Main Features MaterialStainless steel Volume80 Ltr. Motor55 KW Specified Features - Hot mixer Hot/Cold mixercheck Hot mixercheck Capacity50 Ltr. (80 Ltr.) With jacketcheck With motorcheck (55 kW AC) With variable speed drivecheck Rotor speed5 — 50 rpm Pneumatic operated outletcheck Manual operated outletcheck MaterialStainless steel 1.4306 (304L) Information No.013 217 18 Year of construction2018 Mounted on framecheck (machine has a full steel basement frame) With switchgearcheck (electrical panel + local control panel: as is) Extra SpecificationsEquipped with an Industrial Frigo WTP 36/160/X pressurized water temperature control unit: Heating capacity 36 kW, indirect cooling system Temperature range up to 160°C for precise process control High-flow c ...

General SKU409X1231 MakeDrM LocationBarneveld CEcheck TypeTSD 316 Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4404 (316L) Filtercheck (Laboratory Filter) Filter surface0,012 m² Information No.1002561 Year of construction2017 Floor space0,9 x 0,5 m Total height1,65 m Extra SpecificationsTechnical specifications Filtration area: 0.012 m² Filling volume: 0.95 L Max. operating pressure: –1 / +20 barg Max. operating temperature: 250 °C Filter element: Stainless steel candle Gasket materials: FKM / PTFE / FEP Miscellaneous filtersDrM - Dr Müller AGFilters > Miscellaneous filtersBrand > DrM - Dr Müller AG What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in  ...

This Mazak Optiplex Nexus 3015 4,0kW Fiber + Fasani CSS3015 was manufactured in 2018. A fiber laser cutting machine featuring a 3000x1500mm max. sheet size, 4.0kW IPG fiber resonator, intelligent nozzle changer, and Donaldson DFPRO4 extraction. Includes Fasani CSS 1530 automation and a pallet changer. A great opportunity to buy this Mazak Optiplex Nexus 3015 fiber laser cutting machine. Contact us for more information.

General SKU400X1190 LocationBarneveld CEcheck MakeMettler Toledo Main Features MaterialStainless steel Specified Features - Miscellaneous MaterialStainless steel CapacityMax 800 kg Motor230 volt, (Ex) Information TypeIS5sx Mach.No.2210358 Year of construction2000 Floor space1,45x2,00 m Total height0,70 m Extra SpecificationsWith drive on plateMiscellaneousMettler ToledoMiscellaneous > MiscellaneousBrand > Mettler Toledo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This Metallkraft RBM 4 HMS Pro 3050-150 plate rolling machine was manufactured in 2022. It features a robust welded construction, induction-hardened rollers, and a hydraulic drive for the upper roller. The machine includes three digital displays for precise roller adjustments and a hydraulic folding plate for easy workpiece removal. Ideal for heavy industrial use with options for conical bending. Contact us for more information about this machine.

General SKU439X1388 LocationBarneveld MakeThyssen Henschel Main Features MaterialStainless steel Volume15 Ltr. Motor1.1 KW Specified Features - Universal mixer Universal mixer(1x) Capacity15 l. Vessel sizesø 295x235 mm With covercheck Manual operated outletø ± 65 mm With motor1,5 kW (400 V, 1420 rpm) Rotor speed86—535 rpm With lump breakercheck With motor0,5/0,75 kW, 400 V Rotor speed1500/3000 rpm MaterialStainless steel Information TypeHU/G-15 Mach.No.800891 Year of construction1986 Mount.on stainless steel framecheck With switchcheck Floorspace1,00x0,50 m Total height1,30 m Weight290 kgUniversal mixersThyssen HenschelMixers > Universal mixersBrand > Thyssen Henschel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the ...

General SKU322X553 LocationBarneveld MakePuc Probst & Class Motor Motor power2.2 kiloWatt Main Features MaterialStainless steel Motor2.2 KW Inlet diameter55 mm Specified Features - Colloid mill MaterialStainless steel Colloid millcheck Rotor sizesø 60 x 40 mm Teethed rotorcheck With hoppercheck ø 300 x 500 mm Hopper jacketedcheck Inletø 55 mm Outletø 32 mm Motor2,2 kW (380 V, 2840 rpm) Information TypeK 60 No.92030 Mounted on wheelscheck With switchcheck Floorspace0,90 x 0,46 m Total height1,10 m Weight110 kgColloid millsPuc Probst & ClasMills > Colloid millsBrand > Puc Probst & Clas What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machi ...

General SKU357X1337 LocationBarneveld MakeBuss Main Features Motor21.5 KW Inlet diameter50 mm L/D15 Specified Features - Mixing extruder Single screw mixing extrudercheck Screw dia.46mm L/D15 With heating zones3 DC-motor0,710-21,5 kW, 380 volt, 50-1520 rpm Screw speed300 rpm InletDia. 50 mm Feeding with hoppercheck Max. temperature250 MaterialStainless steel Information TypeMDK 46B Mach.No.87/652482 Year of construction1987 Mounted on framecheck Floorspace2,70x0,55 m Total height1,90 m Weight1000 kg Extra SpecificationsWith 2-roll cylinder, roll diameter 150mm, roll length 400mm, 0:55 kW, 220/380 volt, 1400 rpm, roll speed 3,6-18 rpmMixing extrudersBussExtruders > Mixing extrudersBrand > Buss What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are wel ...

General SKU435X1379 LocationBarneveld Main Features Motor7.5 KW Width340 mm Specified Features - Hammer Mill MaterialMild steel Hammer Mills Hammer millcheck Moving hammers24 Hammer width20 mm With sieve cagecheck Housing dimensions 340 x 500 mm With hoppercheck Inlet340 mm Motor7,5 kW (400 V, 1470 rpm) With variable speed drivecheck Speed882—1764 rpm Information MakeJehmlich GmbH Nossen SerialK190430 TypeHM 341 Year of construction2018 Mounted on framecheck With switchcheck With switchgearcheck Floor space1,45x0,62 m Total height1,95 m Weight600 kg Extra SpecificationsMax capacity up to 20 t/h.Hammer MillsJehmlich GmbH NossenMills > Hammer MillsBrand > Jehmlich GmbH Nossen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspec ...

This 3-axis GRABENER Single-sided sheet metal edge milling machine was manufactured in 1984. It features a powerful 50 kW DC motor, spindle speeds up to 500 rpm, and a maximum torque of 2,000 Nm. The machine offers extensive travel capabilities with 15,900 mm on the x-axis and rapid traverse rates up to 8,000 mm/min. Ideal for precision milling with a swivel range of +/-45°. Contact us for more information about this machine.

General SKU391X1060 LocationBarneveld CEcheck MakeMettler Garvens Main Features MaterialStainless steel Motor0.55 KW Specified Features - Miscellaneous transport MaterialStainless steel Miscellaneous transport Capacitymax 20.000 gram Capacitye=d= 5 gramm Information TypeS 100 Mach.No.151014 Year of construction2004 Floor space1,30 x 1,15 m Total height1,25 m Weight280 kg Extra Specifications Belt size: 1100 x 500 mm Max. weight: 20.000 g Min. weight: 800 g Max. temp.: 5 °C/ 40 °C Belt speed: 33-12 m/minMiscellaneous transportMettler GarvensConveying systems > Miscellaneous transportBrand > Mettler Garvens What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld f ...

General SKU379X1441 MakeInstron LocationBarneveld CEcheck TypeC-6898-000 Main Features MaterialStainless steel Motor0.03 KW Specified Features - Viscosity test machine Viscosity metercheck (Notching press) Electric capacity230 volt Motor0,03 kW, 230 volt MaterialStainless steel Information No.50009 Year of construction2019 With switchcheck Floorspace0,52x0,44 m Total height0,44 m Weight43 kgViscosity test machinesÌnstronPlastic machinery > Viscosity test machinesBrand > Ìnstron What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU379X949 MakePlastic Systems TypeDAC 30 No.DAC001-07 Year of construction2006 Main Features MaterialAluminium/Stainless steel Volume30 Ltr. Motor1 KW Specified Features - Miscellaneous dryer MaterialStainless steel Dryercheck (compressed-air desiccant dryer) Capacity30 l. Information LocationBarneveld CEcheck Extra Specifications Hopper capacity: 30 dm³ (≈ 30 L) Process air flow: 7–20 Nm³/h Process temperature range: 50–150 °C Heating power: 0.95 kW Total installed power: 1.0 kW Energy consumption at 80 °C: 0.11–0.29 kW (listed range) Compressed air (process) flow: 6–16 Nm³/h Compressed air (regeneration) flow: 4 Nm³/h Total max compressed air flow: 20 Nm³/h Required compressed air pressure: 6–8 bar (oil- and water-free)  : Miscellaneous dryersPlastic systemsDryers > Miscellaneous dryersBrand > Plastic systems What you can expect  ...

This 3-axis Mazak OPT IPLEX 3015 Fiber II was manufactured in 2016. It features a 6 kW fiber laser, Mazatrol Preview 3 control, and a machining size of 3050 × 1525 mm. Equipped with advanced features like auto nozzle changing, auto focus positioning, and intelligent monitoring functions, it ensures precise and efficient operations. Consider the opportunity to buy this Mazak OPT IPLEX 3015 Fiber II fiber laser cutting machine. Contact us for more information.

This MicroStep Fiber MSF 4001.20L was manufactured in 2016. It features a 4m x 2m cutting table with hydraulic pallet changer, an automatic feeding tube cutting system for tubes up to 200mm diameter and 6m length, and a 4kW IPG YLS laser source. Includes Donaldson extraction and filtration equipment. Consider the opportunity to buy this MicroStep Fiber MSF 4001.20L fiber laser cutting machine. Contact us for more information.

General SKU379X1448 LocationBarneveld MakeCollin TypeTischwalzwerk Main Features Size length210 mm Specified Features - Mixing mill Laboratory presscheck Motor4 kW 380 V Mixing mills MaterialStainless steel Information Mach.No.141 11 86 Year of construction1986 With switchcheck Floorspace1,13 x 0,45 m Total height0,60 m Weight150 kg Extra Specifications2 roller wals, roll dia. 100 mm, roll width 210 mm :Mixing millsCollinPlastic machinery > Mixing millsBrand > Collin What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU379X1446 MakeMonTech LocationBarneveld CEcheck TypeABR 3000 Main Features MaterialStainless steel Specified Features - Viscosity test machine MaterialStainless steel Viscosity metercheck (Abrasion Tester) Motor230 V Speed40 rpm Information No.400 KA 666 Year of construction2019 With switchcheck Floorspace0,74 x 0,30 m Total height0,32 m Weight60 kg Extra SpecificationsRotary drum diameter: 150 mm Roll length: 460 mm Equipped with a quick clamp for test specimens. Peripheral speed of the drum with abrasion sheet: 0.32 m/s. Viscosity test machinesMonTechPlastic machinery > Viscosity test machinesBrand > MonTech What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Bar ...

General SKU379X1445 MakeMonTech LocationBarneveld CEcheck TypeMV3000 Basic Main Features MaterialStainless steel Specified Features - Viscosity test machine Viscosity meterMooney Viscometer Electric capacity230 volt Speed2 rpm With computercheck (as is) MaterialStainless steel Information No.076 KA 667 Year of construction2019 With switchcheck Floorspace0,56 x 0,55 m Total height0,90 m Weight100 kg Extra Specifications Measurement type: Mooney viscosity, scorch, stress relaxation Temperature range: up to approx. 232 °C (precise chamber control) Rotor type: large or small Mooney rotor (depending on setup) Closing force: 11.5 kN Rotor speed: 2 rpm (Mooney test speed) Pneumatic supply: 4.5 bar (clean, dry air) Test chamber: rigid frame, automatic clamping Viscosity test machinesMonTechPlastic machinery > Viscosity test machinesBrand > MonTech What you can expec ...

This 5-axis Mitsubishi MV1200R was manufactured in 2018 and features advanced capabilities such as X-Axis Travel of 15.7, Y-Axis Travel of 11.8, and Z-Axis Travel of 8.7. It includes a Mitsubishi M800 control, Auto Wire Threading, and a Chiller for enhanced performance. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV1200R machine we have for sale. Contact us for more information about this machine.

General SKU379X1442 MakeMonTech LocationBarneveld CEcheck TypeDisperTester 3000+ Main Features MaterialMild steel Specified Features - Viscosity test machine Viscosity metercheck (dispertester) Electric capacity230 V MaterialMild steel Information No.318 KA 666 Year of construction2019 With switchcheck Floorspace0,22x0,40 m Total height0,18 m Weight25 kg Extra SpecificationsStandards Compliant with ISO 11345:2006 and ASTM D 7723 (dispersion analysis) Optics Magnification: 100× Field of view: 12 mm × 3.5 mm Agglomerate measurement range: 1 µm – 250 µm Image resolution: 10 MP with telecentric optics Focus: automatic or manual Illumination: controllable multi-directional LED Mechanical Precision scanning with linear two-stage system enabling multiple readings per sample Viscosity test machinesMonTechPlastic machinery > Viscosity test machinesBrand > MonTech ...

This 5-axis Mitsubishi MV2400S wire EDM machine was manufactured in 2015. It features X, Y, Z movements of 600 x 400 x 310 mm and U, V axes at 150 x 150 mm, supporting a maximum workpiece weight of 1,500 kg. Equipped with an advanced Mitsubishi M700 controller with 3D CAD/CAM capabilities, it ensures precise machining. Consider the opportunity to buy this Mitsubishi MV2400S wire EDM machine. Contact us for more information about this machine.

General SKU347X805 MakeLoma LocationBarneveld CEcheck TypeIQ3+E Main Features MaterialStainless steel/Plastic Dia/Width650 mm Specified Features - Metal detector MaterialPlastic, Stainless steel 1.4301 (304) Metal detectorcheck Tunnel sizes650x370 mm With conveyor beltcheck Belt width495 mm Belt length1500 mm With motor0,25 kW 240—380 V Information No.QEUS5-40-34148D Year of construction2016 Mounted on wheelscheck With switchgearcheck Floorspace1,60x1,35 m Total height1,35 m Weight1250 kgMetal detectorsLomaPackaging machines > Metal detectorsBrand > Loma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU347X804 MakeLoma LocationBarneveld CEcheck TypeQ3 Main Features MaterialStainless steel/Plastic Dia/Width650 mm Specified Features - Metal detector MaterialPlastic, Stainless steel 1.4301 (304) Metal detectorcheck Tunnel sizes650x360 mm With conveyor beltcheck Belt width500 mm Belt length2600 mm With motor0,25 kW 110—240 V Information No.Q3B65-40-27682D Year of construction2015 Mounted on wheelscheck With switchgearcheck Floorspace2,80 x 1,32 m Total height1,50 m Weight520 kgMetal detectorsLomaPackaging machines > Metal detectorsBrand > Loma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU347X810 MakeKemutec LocationBarneveld TypeA1500E Main Features MaterialStainless steel Volume1200 Ltr. Motor37 KW Specified Features - Powder turbo mixer Powder turbo mixercheck Capacity1500 Ltr. Useful capacity1200 Ltr. Trough sizesø 1000 x 1650 mm Inletø 150 mm Inspection hatch1100 x 600 mm Outlet550 x 480 mm Motor37 kW, 415 V 1465 rpm Speed mixing shaft97 rpm With lump breakercheck (2×, potentially 3×) Motor2x 4 kW, 415 volt, 2840 rpm Speed lumpbreaker2840 rpm MaterialStainless steel 1.4401 (316) Information No.100013 Year of construction1988 Mounted on framecheck Floorspace3,580x1,50 m Total height2,00 m Weight1700 kgPowder turbo mixersKemutecMixers > Powder turbo mixersBrand > Kemutec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide  ...

General SKU428X1340 MakeIMR LocationBarneveld CEcheck TypeRRM 60 Main Features MaterialStainless steel Motor0.75 KW Specified Features - Tumbler mixer Barrel mixercheck Diameter± 405 mm Speed mixer± 30 rpm Information No.- Year of construction2013 Floorspace1,5 x 1,5 m Total height1,5 mTumbler mixersIMRMixers > Tumbler mixersBrand > IMR What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU430X1346 LocationBarneveld CEcheck MakePallmann Main Features Motor150 KW Inlet diameter250 mm Width1000 mm Specified Features - Fine Impact Mill MaterialStainless steel 1.4541 (321) Fine Impact Mills Hammer millcheck 2 Driven rotorscheck Rotor size995 mm Grinding room sizeø 1000 mm Fixed hammerscheck (60) Hammer width250 mm With sieve cagecheck Housing dimensions ø 1400 mm Inletø 250 mm Motor110 kW, 380 V, 1500 rpm: 55 kW, 380 volt, 1500 rpm SpeedTurbo wheel drive speed 1590 rpm: sieve basket speed 660 rpm Information TypePPSR 10-300 No.0965.2007.0010 Year of construction2007 Mounted on framecheck Floor space4,00 x 1,545 m Total height2,85 m Weight7000 kgFine Impact MillsundefinedMills > Fine Impact MillsBrand > undefined What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for ship ...

General SKU427X1334 LocationBarneveld CEcheck Pressure Working pressure15 Bar Main Features MaterialStainless steel Volume15 Ltr. Motor1.5 KW Specified Features - Miscellaneous pump MaterialStainless steel 1.4301 (304) Miscellaneous pumps Pumpcheck (Internal gear (gerotor) pump) Number of pumps:1 Capacity15 l/min With motorcheck (1,5 kW 230—400 V 1440 rpm: Ex) InletDN25 OutletDN32 Information MakeBühler Technologies GmbH TypeBFP 15-4-1.5 kW Mach.No.20190508007 37PU1507516 ATEX compatiblecheckMiscellaneous pumpsBühlerPumps > Miscellaneous pumpsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU390X1034 MakeLödige LocationBarneveld CEcheck TypeK-TM400 Pressure Working pressure0.5 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Volume400 Ltr. Motor15 KW Specified Features - Powder turbo mixer Powder turbo mixercheck Capacity510 l. Useful capacity400 l. InletDN80/165 Top connectionscheck Inspection hatchcheck 600x350 mm OutletDN150 With jacketcheck volume 45 l. Max. temperature200°C Glands air purgedcheck Motor15 kW, 290-500 volt, 1470 rpm Speed mixing shaft76 rpm MaterialStainless steel 1.4571 (316Ti) Information No.16697 Year of construction2012 Mounted on framecheck With switchcheck Floorspace3,00x0,80 m Total height1,80 m Weight1700 kgPowder turbo mixersLoedigeMixers > Powder turbo mixersBrand > Loedige What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new ...

General SKU409X1224 MakeNetzsch LocationBarneveld CEcheck TypeZeta RS2 Main Features MaterialStainless steel Volume2 Ltr. Motor15 KW Specified Features - Sand mill MaterialCeramic, Stainless steel 1.4301 (304) Horizontal sand millcheck Capacity2 l Housing dimensions dia 150 x 200 mm InletDN15 OutletDN15 With mechanical sealcheck With jacketcheck Motor15 kW, 400 volt, (Ex) With variable speed drivecheck Rotor speed500-2250 rpm With pumpcheck Motor0,55 kW, (Ex), With variable speed drive26-447 l/h, Information No.2800799-10 Year of construction2018 Mounted on framecheck on legs With switchgearcheck Floorspace1,620 x 0,995 m Total height1,760 m Weight1100 kg Extra SpecificationsWith blocking fluid vessel, flow meter, control/power cabinet, touchscreen control.Sand millsNetzschMills > Sand millsBrand > Netzsch What you can expect from Foeth: -- Machine is in ...

General SKU390X1006 LocationBarneveld CEcheck MakeBrabender Main Features MaterialStainless steel Motor0.37 KW Inlet diameter150 mm Specified Features - Metering screw MaterialStainless steel Metering screws Metering screwcheck Screw diameter50 mm Screw length450 mm With hoppercheck Capacity± 44,55 Ltr. Hopper sizestrapezium: a: 400 mm, b: 260 mm, h: 300 mm: H: 450 mm Inletø 150 mm Outletø 50 mm With motor0,37 kW, 380 volt, 1380 rpm Screw speed96 rpm Information TypeFW40/0 plus-50 & DDW-MD2-DDSR20-5 No.0903048.2104 0903048.2105 Year of construction2010 With switchgearcheck as is With switchgearcheck as is (E-scheme available) Extra SpecificationsWith: Sitecon, vibro hopper filter Busch, blower, 3 kW, 500 volt, 2x Brabender, dosing screw, type DDW-MD2-DDSR20-5: :motor: :0,18kW: feed rate 0,25 — 1 kg/h:Metering screwsBrabenderDosing units > Metering s ...

General SKU390X1046 MakeBühler LocationBarneveld CEcheck TypeK-TM630 Pressure Working pressure0.1 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Volume630 Ltr. Motor15 KW Specified Features - Powder turbo mixer Lödige mixercheck Powder turbo mixercheck Capacity630 Ltr. Inspection hatchcheck With jacketcheck (63 Ltr.) Max. temperature0 — 200°C Motor15 kW, 290/500 V MaterialStainless steel Information No.15850 Year of construction2007 Mounted on framecheck With switchcheckPowder turbo mixersLoedigeMixers > Powder turbo mixersBrand > Loedige What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU351X817 LocationBarneveld MakeForberg TypeF1000 Main Features MaterialStainless steel Volume1000 Ltr. Motor15 KW Specified Features - Paddle mixer Paddle mixercheck Double shaftcheck Useful capacity1000 Ltr. Trough sizes1500 x 1700 x 1100 mm With covercheck Inletø 500 mm, 300 mm and 250 mm Outlet1000 x 300 mm Glands air purgedcheck Motor15kW 380V Speed mixing shaft± 40 rpm MaterialStainless steel 1.4552, Stainless steel 1.4301 (304) Information No.8041D Year of constructionunknown Mounted on framecheck Floor space1,3x2,75 m Total height4,2 m Weight3280 kg Extra SpecificationsThis paddle mixer is equipped with an output screw: Output screw length: 2 m Diameter: 150 mm Pitch: 100 mm Outlet: 160 × 140 mmPaddle mixersForbergMixers > Paddle mixersBrand > Forberg What you can expect from Foeth: -- Machine is in working condition -- At a reduced pr ...

This 3-axis Makino EDNC 30 die-sinking EDM machine was manufactured in 1998. It features travel paths of 300mm in X, 250mm in Y, and 250mm in Z, a table size of 500 × 350 mm, and can handle a maximum workpiece weight of 500 kg. Consider the opportunity to buy this Makino EDNC 30 die-sinking EDM machine. Contact us for more information about this machine.

General SKU340X781 LocationBarneveld CEcheck MakeIshida TypeDACS-GN-SE050-35-SS-I-S Specified Features - Miscellaneous transport Capacity32-5000g Motorcheck 230v Information No.560012087 Year of construction08-2017 Floor space0,95x0,75 m Total height1,37 m Weight100 kg Extra Specificationsishida checkweigher: Max belt speed: 90m/min max weight: 5000g minimum weight: 32g division value: 2g equipped with receipt printer conveyor length 950 mm conveyor height 750 mm, adjustable Miscellaneous transportIshida Co. Ltd.Conveying systems > Miscellaneous transportBrand > Ishida Co. Ltd. What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU340X784 LocationBarneveld MakeBoekels TypeEWK 2000+/WS 1,25 KG CD Klasse X Main Features MaterialStainless steel Specified Features - Miscellaneous transport Capacity4-1500g Information No.VAB-13565-02 Year of construction2002 Floor space1,45x0,9 m Total height1,75 m Weight270 kg Extra Specifications boekels checkweigher: Max belt speed: 0,92m/s max weight: 1500g minimum weight: 4g division value: 0,2g conveyor length 1450 mm conveyor height 800 mm, adjustableMiscellaneous transportBoekelsConveying systems > Miscellaneous transportBrand > Boekels What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU329X704 MakeHermann Linden LocationBarneveld CEcheck TypeKIII5A Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume5 Ltr. Motor2.2 KW Specified Features - Z-blade mixer MaterialStainless steel 1.4301 (304) Z-blade mixercheck Capacity5 l. Trough sizes190x240x200 mm With covercheck With jacketcheck Single gearedcheck With adjustable packing glandscheck Motor2,2 kW, 400 volt, 1420 rpm With variable speed drivecheck Arm speed568 rpm Screw dischargecheck Motor3,7 kW, 400 volt, 1420 rpm With variable speed drivecheck Screw speed14/72/144 rpm Information No.1767 Year of construction1996 Mounted on foundationcheck With switchcheck With switchgearcheck Sizes switchgear0,60x0,40x2,0 m Floorspace1,30x0,80 m Total height1,50 m Extra SpecificationsWith Lauda oil heating, type K6 KSZ-blade mixersHermann LindenKneaders > Z-blade mi ...

General SKU390X1015 LocationBarneveld CEcheck MakeBrabender Main Features MaterialStainless steel Motor0.37 KW Inlet diameter150 mm Specified Features - Metering screw MaterialStainless steel Metering screws Metering screwcheck Screw diameter50 mm Screw length450 mm With hoppercheck Capacity± 44,55 Ltr. Hopper sizestrapezium: a: 400 mm, b: 260 mm, h: 300 mm: H: 450 mm Inletø 150 mm Outletø 50 mm With motor0,37 kW, 380 volt, 1380 rpm Screw speed96 rpm Information TypeFW40/0 plus-50 & DDW-MD2-DDSR20-5 No.1201737.1209 1201737.1223 With switchgearcheck as is (E-scheme available) Extra SpecificationsWith: Sitecon, vibro hopper filter, Busch, blower, 3 kW, 500 volt, 3x Brabender, dosing screw, type DDW-MD2-DDSR20-5: :motor: :0,18kW: feed rate 105-400 g/h and 240-680 g/h: outlet: ø 55 mmMetering screwsBrabenderDosing units > Metering screwsBrand > Brabender W ...

Mesutronic Metal detector with sorter, type: FC 01 BA 3.1.1, serial number: 1013 FC, year of manufacture: 2013, 230 V, 50 Hz, plastic belt, belt width: 80 mm, pass-through: 130 mm x 205 mm, overall dimensions: 2050 mm x 990 mm x 1500 mm., Safeline Metal detector with exchanger, passage: 200 mm x 350 mm, plastic belt, belt width: 120 mm, overall dimensions: 1600 mm x 900 mm x 1650 mm., Metal detector by Thermo Electron Corporation, Serial number: 06132547, plastic band, band width: 260 mm, passage: 300 mm x 100 mm, overall dimensions: 1200 mm x 900 mm x 1500 mm., Metal detector of the Thermo Electron Corporation , Model: SPECGKDSP3NAS, Serial number: 6277, Year of construction: 2005, plastic band, band width: 250 mm, passage: 300 mm x 100 mm, overall dimensions: 1400 mm x 1100 mm x 1500 mm., Goring Kerr Limited mobile pipeline metal detector, Type: D.S.P2, Serial number: 57423, Year of ma ...

This Mitsubishi Electric SG12M die-sinking EDM machine was manufactured in 2020. It features a robust 3750 kg weight, with a maximum workpiece weight capacity of 1000 kg. The machine includes a dielectric fluid chiller unit and a dual paper filter system, ensuring optimal operational conditions. The working tank has an automatic elevation system and hinji open-door for ease of use. If you are looking to get high-quality die-sinking capabilities, consider the Mitsubishi Electric SG12M machine we have for sale. Contact us for more information.

This 3-axis Mitutoyo Quick Scope QS-250Z was manufactured in 2001. It features a measuring range of X=200 mm, Y=250 mm, Z=100 mm, and a maximum travel speed of 80 mm/s. The machine includes a 1/3 CCD color camera and various lighting options, enhancing visibility and precision. Ideal for detailed component analysis, consider the opportunity to buy this Mitutoyo Quick Scope QS-250Z CMM machine. Contact us for more information about this machine.

This MEMMERT UN110 was manufactured in 2021. It features a working temperature range from 20 to 300°C, with a setting accuracy up to 0.5°C for precise control. The unit has a volume of 108 liters, ideal for various laboratory applications. Consider the opportunity to buy this MEMMERT UN110. Contact us for more information.

This 3-Axis Mora Primus 152012 was manufactured in 2019. It features a large measuring range with X-axis at 1500 mm, Y-axis at 2000 mm, and Z-axis at 1200 mm. Supports a maximum load of 4500 kg, ensuring robustness for various tasks. With a vector speed up to 519 mm/s, it offers efficient operations. If you are looking to get high quality measuring capabilities consider the Mora Primus 152012 machine we have for sale. Contact us for more information.

1993 Airtable Side tables (air) Light barrier Programmable Jogger–RAB2 Lift – L600-3 Three extra spare knifes In production Located: Germany Available: 05/2026

This DEA Mistral 070705 was manufactured in 2003. A coordinate measuring machine (CMM) located in Finland, it features X-axis movement of 700 mm, Y-axis movement of 650 mm, and Z-axis movement of 450 mm. Equipped with a PH10M measuring probe and TP20 module, it operates on Windows XP Pro SP3. If you are looking to get high-quality measuring capabilities consider the DEA Mistral 070705 machine we have for sale. Contact us for more information.

This optical measurement machine was manufactured in 2018. The MAHR MahrShaft SCOPE 250 plus features a high-resolution CMOS matrix camera, integrated 21 touchscreen monitor, and a CNC MarEcon control system. It supports a measuring length of 250 mm and can handle workpieces up to 100 mm in diameter and 5 kg in weight. If you are looking to get high-quality measurement capabilities, consider the MAHR MahrShaft SCOPE 250 plus machine we have for sale. Contact us for more information.

This 4-axis Exeron EDM 310 MF20 was manufactured in 2006. Ideal for precision die-sinking applications, it offers robust performance and reliability. If you are looking to get high-quality die-sinking capabilities, consider the Exeron EDM 310 MF20 machine we have for sale. Contact us for more information.

This 3-axis Mitsubishi Electric MV2400R wire EDM machine was manufactured in 2013. It features a PC-based control unit with a 15 LCD touchscreen, supporting 2D/3D CAM and graphics verification. Capable of handling workpieces up to 1050 x 820 x 305 mm and 1500 kg, it offers a machining travel of 600 x 400 x 310 mm. If you are looking to get high-quality EDM capabilities, consider the Mitsubishi Electric MV2400R machine we have for sale. Contact us for more information.