m 520 used for sale

FILLETING MACHINE BAADER TYPE: 208 Technical description: Output conveyor width (x2): 108 mm Power supply: 400V / 50 Hz Power: 2,6 kW Dimensions: 3750 x 1050 x 1250 mm This machine processes small gutted and headed hake, small haddock, saithe, cod and whiting. The cuts of the spring-loaded circular knives being controlled by the fish itself, the BAADER 208 produces single fillets with skin of high quality and with best yield. The BAADER 208 is easy to maintain and to operate. All functional areas are very well accessible. The machine is of robust construction and consists mainly of stainless materials so that it has a long service life also when used at sea.

GRINDER, MEISSNER GMBH & CO.KG, TYPE: GW 130/2 Technical description: Serial number: 329 198 Power supply: 380-440 V/50-60 Hz Outlet diameter: ?130 mm Power: 15 Kw Dimensions: 1300 x 1000 x 1260 mm

SALMON SLICER, CP FOOD MODEL: SILK CUT SLICER TYPE: SC 180 Technical description: Serial number: :7527 Power supply: 230/240 V, 1 Ph, 50/60 Hz, 7.5 A, 1.0 kW Inlet: Plastic wire belt, belt widht: (2x) 180 mm Outlet: Plastic belt, belt widht: (2x) 200 mm Plastic rollers, rolers widht: (2x) 200 mm Dimensions: 1800 x 1000 x 1550 mm The machine is designed for slicing smoked salmon, trout and Greenland halibut without bones or skin, and with a temperature of about ?2 - +2? C. Its important that the fish has the correct temperature.

BREADING MACHINE, KOPPENS TYPE: PR 600 Technical description: Machine number: PR600-972 Power supply: 380-440 V/50-60 Hz Power: 1.7 kW Weight: 300 Kg Stainless steel mesh belt Belt widht: 600 mm Dimensions: 2200 x 800 x 1900 mm

HEADING AND FILLETING MACHINE FOR SALMON AND MORE, CARNITECH TYPE: CT2620 + CT2630 Technical description: Heading machine CT2620 Power supply: (3x) 400 V, 50 Hz, 8 A Machine number: 08-0081 Year: 28/08/08 Dimensions: 4200 x 2100 x 1800 mm Filleting machine CT2630 Machine number: 08-0067 Year: 18/06/08 Power supply: (3x) 400 V, 50 HZ, 11 A Dimensions: 1800 x 850 x 2000 mm CT 2620 has been designed for head and tail cutting of salmon fish from 2 to 7 kg. The product is fed to the machine via a feeding chute, after which several operations are carried out on the fish, as the round attachment rotates one quarter of a revolution for each push on the button on the operation panel, see section 3.0 for further details. During initial operation, the occiput is sawed through with a round knife, where upon a guillotine knife tilts down to cut off the head, which then lands in the waste carrier  ...

FILLETING MACHINE, BAADER 36 Technical description: Power supply: 400 V/50Hz Dimensions: 3500 X 1000 X 1700 mm - 2300 X 1000 X 1100 mm Can be combined with Automatic feeder BAADER 488 The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483 or 484. A skinning machine BAADER 55 can be attached for the production of skinless herring fillets.

FILLETING MACHINE FOR SARDINE, HERRING, BLUE WHITING, BAADER TYPE: 134 Technical description: Power supply: 380 V, 50 Hz, 12,0 A, 2 kW, 3 Ph Dimensions: 3000 x 2100 x 1200 mm Weight: 450 Kg Can be combined with Automatic feeder for sardine and herring, Baader type: 478 This machine is especially designed for the filleting of small herring and pilchard with an overall lentgh of 15-25 cm (25-125 g), the convenient infeeding procedure and the steplessly adjustable operating speed permit high throughput. Excelent yield is guaranteed by a meat-saving selfadjusting headcut, adjustable tailcut and reliable passage through the filleting tools leading to smoothly cut block-fillets, single fillets without dorsal fins as well as belly cut herring with or without tail fins. Combined with the automatic feeder BAADER 478, the machine becomes an automatic filleting unit operated by only one person fo ...

FILLETING MACHINE BAADER 35 WITH NOBBING SYSTEM (SINGLE OR BUTTERFLY FILLET) FOR HERRING (20-40 CM), MACKEREL (24-40 CM), BLUE WHITING (22-40 CM) AND OTHER PELAGICS Technical description: Serail number: 10-1363-0035 Year: 1992 Throughput: 100-200 pieces/min Dimensiones: 3300 x 1250 x 1800 mm The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483, 484 or 488. A skinning machine BAADER 55 can be attached for the produc ...

PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-2C Technical features: Output: up to 50 cans/minute Recommended output: 20 to 50 cans/minute (according the can type) Format: diameter 150 mm Cans height: max. 120 mm

DEFROSTER-MIXER FOR VEGETABLES WITH ROTARY DRUM, MECALSA, TYPE: MC ESC TRL Technical description: Heating: Direct steam Voltage: 380/440V Frequency: 50/60 Hz

PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-110 Technical features: Output: up to 100 cans/minute Recommended output: 40 to 80 cans/minute (according the can type) Formats: 1 unit with format diameter 73mm (ID 2015) 1 unit with format diameter 99mm Others formats: diameter 65mm, 1/2 oval, 1/4 oval Cans height: 25-62mm

The high-end PRECIOUS M 080 system from EOS was developed for the additive manufacturing of precious metal parts for the watch and jewelry industry. Designs can be realized within a few hours and without investing in tools. The system builds the parts layer by layer, melts fine metal powder with a laser and creates extremely complex shapes such as free-form surfaces, hollow shapes and moving parts., The machine offered is fully functional., - Last maintenance unknown, - Machine parameters for red, white and yellow gold, technology: DMLS (Direct Metal Laser Sintering), Construction volume: Diameter 80 x 95 mm, Dimensions machine unpacked: 800 x 950 x 2250 mm, Weight machine unpacked: 580 kg, Power connection: 200-240V, network connection: Ethernet, software: EOS RP Tools (optional), EOSPRINT, laser: Yb-Fibre Laser 100W, scanner: High-speed scanner, F-Theta lens, scanning speed: up to 7.0  ...

Power: 1.5kW, materials: plastic/aluminum, intended use: welding and machining processes, operating pressure: 7bar, machine dimensions X/Y/Z: approx. 1500mm/1500mm/1800mm, weight: approx. 150kg. Including accessories. On-site inspection is possible.

The multihead weigher was briefly used for mozzarella, includes basic module, power supply, distributor drive, dosing chute, storage container, weighing container, chute set, hopper, operating unit, holder, accessory set, feed hopper, collecting container and other elements. On-site inspection is possible, the machine is already dismantled and ready for loading, with documentation. The machine has been used very little.

A total of three counting and distribution machines are available for filling containers (pouches) to the exact number of pieces. 1) MTF Technik MR-S1, year of manufacture: 2017. 2-3) Two identical Lauper LQ 100, year of manufacture: 2007, control: IT 9000. Documentation available. On-site inspection is possible.

A labeling machine in a special design is available. It can apply a continuous label to the top and sides, for example for jams, honey jars and more. The machine has never been used. Documentation available. On-site inspection is possible.

Two Beck MPX 240T are available, control panel: Siemens SIMATIC OP7, with documentation, on machine 1 the Teflon coating of the welding knife is partially damaged and must be replaced, on machine 2 the welding knife may have to be replaced, as well as the cover of the fan of the control cabinet. An on-site inspection is possible.

Chamber dimensions X/Y/Z: approx. 460mm/550mm/200mm, welding bars: 4, welding bar length: 440mm, welding seam: double-seam separation sealing, machine dimensions X/Y/Z: approx. 1000mm/950mm/1100mm, weight: approx. 600kg. On-site inspection is possible.

Belt width: 10/12mm, belt material: PP (polypropylene), connected load: 1kW, length: 1420mm, width: 615mm, height: 1550mm. The machine has already been dismantled, an on-site inspection is possible.

A continuous servo side sealing machine IFP for the food industry is available. Packaging capacity: 100 packages/min, max. sealing dimensions: 650mm, max. sealing length: unlimited, film material: PP/POF/PVC, max. film reel width: 800mm, max. film reel diameter: 350mm, working height range: 870mm-930mm, output: 9kW, machine dimensions X/Y/Z: approx. 1800mm/2650mm/1500mm, control: Siemens. Documentation available. On-site inspection is possible.

Several Mosca strapping machines are available. Table dimensions X/Y: 980mm/540mm, working height: 820mm/900mm, strapping: polypropylene (PP), strap width: 5mm/8mm/12mm, strap thickness: 0.4mm/0.8mm, strap coil core diameter: 200mm, core width: 190mm, weight: approx. 120kg. Documentation available. On-site inspection is possible.

Two manual capping machines and a pressure container are available. 1) Alwid capping machine, year of manufacture: 2004, operating pressure: 6bar-8bar, bottle height range: 81mm-257mm. 2) Bausch & Ströbel screwing machine, operating pressure: 4bar-6bar. 3) Müller K94073 pressure tank, year of manufacture: 2004, volume: 100l. On-site inspection is possible.

A film banding machine with shrink wrapper Meurer packaging machines is available. Banding capacity: 35 products/min, bundle capacity range: 1x5/1x10, product dimensions X/Y/Z min./max.: 120mm x 120mm x 70mm / 265mm x 125mm x 38mm, bundle dimensions X/Y/Z min./max.: 228mm x 265mm x 125mm / 350mm x 120mm x 120mm. Machine dimensions X/Y: approx. 3300mm/3020mm, operating hours: approx. 5842h. Documentation available. On-site inspection is possible.

Various laboratory devices are available for quality testing in the textile industry. 1) Textile tensile tester Textechno FPA ME, year of manufacture: 2000, max. speed of pull-off clamp: 5000mm/min, clamping dimensions X/Y: 46mm/10mm, clamping pressure 3bar/5bar/8bar: 1200N/2000N/3200N, max. clamping distance: 960mm, force transducer: E 10N/E100N/E1000N, accuracy: +/-1%, machine dimensions X/Y/Z: approx. 885mm/700mm/1730mm, weight: approx. 200kg, control: Textechno Bus. 2) Illuminated table White Screen Normlight, lighting: 3x 36W, machine dimensions X/Y/Z: approx. 1250mm/800mm/850mm. 3) Textile length measuring machine Yuan More YG086, year of manufacture: 2011, measurement: linear yarn density, yarn count: 1-6, frame circumference: 1000mm (+/-1mm), frame speed min./max.: 30r/270r/min, max. yarn frame turns: 9999, yarn traverse stroke: 35mm (+/-0.5mm), single yarn tension range: 0cN-100 ...

A 3-needle hem sewing machine with trimming device (high-speed cylinder bed coverstitch machine with integrated thread trimmer and trimming device) Juki is available. Stitch type: triple coverstitch, needle gauge: 5.6mm, sewing speed: 6000 stitches/min, table top dimensions X/Y: 1060mm/600mm, needle: UY128GAS 9S-14S, stitch length range: 0.9mm/4.5mm, control: SC921B, control panel: CP18B. Documentation available. On-site inspection is possible.

Usable working area: 2000x3000mm, z-axis: 50mm, repeatability on the entire surface: ±0.05mm, X/Y/Z-addressable resolution: 0.001mm, max. acceleration: 15m/s², max. working speed in XY-axis: 2000mm/s, drives: X/Y-system with linear motors, Z-axis with servo motor. Laser protection class: Class 1, with cover, base body: stable, welded steel frame structure, axis system: X/ Y/ Z movement axes, drive: linear motor drive, contactless and low-wear, removal system: 2000mm extension, conveyor: Aluminum slats with servo motor drive, Pressure roller: for material, Laser source: CO2 laser 300W, closed and maintenance-free, Cooling: Closed cooling circuit with water recooler for laser, Cutting head: 5 inch, lens, cutting nozzle, cutting gas supply, Extraction: Extraction tray for small parts and dust, Software: CAM control software ICARO. Motorized brush width: 2000mm, SEI PC console: without com ...

A vacuum filler for hot filling and a 4-head Alcoa capper are available. 1) Vacuum filler for hot filling, running direction: left-right, bottle formats: 1l VDF/0.5l NRW/0.33l Ale/0.75l Bordeaux, filling capacity: 5000 bottles/h. 2) 4-head capping machine Alcoa 28 MCA, year of construction: 1997, bottle formats: 0.5l NRW/1l and 0.75l Bordeaux, capping capacity: 5000 bottles/h. The two machines were part of a complete line. The capper can screw more than 5000 bottles/h, but it was limited by the filler. Both machines with complete documentation and dismantled. On-site inspection is possible. Individual purchase possible.

A GEA clarifier (skimmer) is available. Bowl speed: 5920 rpm, material density: 1.1 kg/dm³, production capacity: approx. 10000 l/h, motor power: approx. 18 kW, construction material: stainless steel 316, documentation available. On-site inspection is possible.

Capacity: 200l, pouring height: 600mm, boiler diameter: 694mm, boiling time: 33min, connected load: 37kW, fuse protection: 3x 63A, protection class: IPX5, length: 1300mm, width: 850mm, height: 920mm, weight: 235kg. Electrically tiltable, heating type: electric, cover: double-walled. On-site inspection is possible.

Load capacity: 5600kg, loading volume: 12m³/12000l, top speed: 25km/h, number of augers: 1, tire size: 315/60 R22.5, tire tread depth: 10mm, weighing system: scales, feed discharge: front left, corrosion: visible. Documentation available. On-site inspection is possible.

Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, maximum bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank volume: 300l. Machine dimensions X/Y/Z: approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection is possible.

A T-S-I mixing and dosing system for adhesives is available. System type: two-component gear pump dosing system, material type: 2K silicone, swivel arm length: 1200mm, hose length: 2500mm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 650kg. Documentation available. On-site inspection is possible.

A flexographic printing, slitting, die-cutting and gluing system with bundle ejector (Flexo Foldergluer) for corrugated board production and processing DY Machinery is available. Processes: Feeding, printing, creasing, slitting, die-cutting, folding, gluing, bundle ejection. Production speed: 220 sheets/min, max. sheet guide X/Y: 1200mm/2750mm, max. printing area X/Y: 1170mm/2700mm, min. sheet dimensions X/Y: 320mm/600mm, total system weight: approx. 42t. 1) Belt feeder with vacuum, dust separator, speed indicator and alignment device. 2) Top-side flexo printing with draw roller transfer, ink stop sensors and automatic cleaning. 3) Creasing and slitting unit with trimming and glue flap knife, slitting knife thickness: 8mm. 4) Rotary punch with polyurethane anvil and soft punching system, punching dimensions: +/-25mm. 5) Downward folding and gluing unit based on VALCO VC 350 AG system. 6) ...

Laser power: 10W, Laser type: HyperRapid NX10, Mains voltage: 400V, 60Hz, Phases: L1+L2+L3+N+PE, rated current: 12.5A, peak current: 25A, rated power: 8.65kW, max. power: 17.3kW. Applications: Laser cleaning, laser marking, laser structuring, laser cutting. Machine dimensions X/Y/Z: approx. 1400mm/1400mm/2200mm, weight: approx. 4000kg. Documentation available.

Measuring dimensions X/Y/Z: 610mm/610mm/200mm, resolution: 0.1µm, measuring speed: 250mm/s, measuring type: multisensor (video, laser, mechanical test probe), software: OptiCheck 3D 4.5 (MahrVision 3D), touch probe: TP200. 3x servo amplifier, X- and Y-axis motor were newly purchased. The machine was calibrated in December 2023. The machine has an electrical whirring noise that comes from the servo amplifier card. Documentation available. On-site inspection is possible.

An MBO folding machine is available. Buckle plates: 4, max. paper width: 560mm. On-site inspection is possible.

Two Merz sachet machines for the pharmaceutical industry are available. 1) Merz Verpackungsmaschinen GmbH MP-2, year of manufacture: 2002, modified: 2008, pouch width range: 15mm-160mm, pouch length range: 15mm-200mm, filling volume range: 0.2ml-250ml, filling capacity: 100 cycles/min. 2) Merz Verpackungsmaschinen GmbH 091, year of manufacture: 1998, modified: 2000. Both packaging machines are duplex-capable. Documentation available. On-site inspection is possible. Individual sale possible.

A Mitutoyo roundness analysis system without monitor is available. Rotation accuracy: 0.02 + 0.0006H, rotation speed: 2/4/6/8/10 rpm, max. workpiece weight: 30kg, max. workpiece diameter: 500mm, machine weight: approx. 200kg, control: Roundpak-400, version: 3.002. Documentation available. On-site inspection is possible.

A Mitutoyo CNC coordinate measuring machine calibrated at the end of 2024 is available. Measuring dimensions X/Y/Z: 705mm/705mm/60mm, traversing speed: 250mm/s, measuring speed: 1-3mm/s, acceleration: 980mm/s², resolution: 0.0005mm, table dimensions X/Y: 870mm/1320mm, max. workpiece height: 740mm, max. workpiece weight: 500kg. Machine dimensions X/Y/Z: approx. 1500mm/1550mm/2700mm, weight: approx. 1300kg, control: STATPAK in MCOSMOS-1 v4.2.R3. Documentation available. On-site inspection is possible. Expected to be available from the end of June 2025.

A Mitsuboshi Diamond Industrial CNC glass cutting machine is available. Glass thickness range straight: 0.4mm-1.1mm, glass thickness range curve: 0.8mm-2.2mm, cutting range X/Y: 500mm/500mm, cutting speed: 500mm/s, cutting accuracy straight: +/-40µm, cutting accuracy curves (depending on radius): +/-100µm. Machine dimensions X/Y/Z: approx. 1100mm/1900mm/1600mm, weight: approx. 1000kg. Documentation available. On-site inspection is possible.

Shipping weight: ? kg Packing: 1200 x 800 x 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

internal diameter: 2 - 40 mm grinding depth: 70 mm swing diameter: 285 mm total power requirement: 5,5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: m Machine in good working condition, with new e-motor for the working spindle drive. Machine video: https://youtu.be/N95AzX9D_QY Max. Distance chuck flange - wheelhead 390 mm Accessories: Grinding spindle, make PRECISE 20.000 - 66.000 rpm, power 1.3 kW Grinding spindle, make PRECISE 60.000 - 120.000 rpm, power 0.23 kW Magazine Machine documentation. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diameter: 230 mm table diameter: 500 mm workpiece height: 150 mm weight of the machine ca.: 2 t dimensions of the machine ca.: 2 x 1.2 x 2.2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

koop: Tuchenhagen Mixproof Valve 4'' Manifold GEA Order number: 7100.14 Voor meer informatie kunt u bellen of een e-mail sturen. Phone: 06-20758459 E-mail: wh.derikxgmail De prijs is exclusief 21% BTW.

Deck Oven Miwe Electro EL 5.1216 A used Miwe Elektro EL 5.1216 deck oven with a total baking area of 10sqm is for sale and immediately available in the warehouse in Bielefeld. The oven is electrically heated with 5 shelves each 120cm wide and 160cm stove depth and with exhaust hood including fan.Backstuben oven used fully functional from Miwe for sale. - 5 shelves each 120x160cm - 5 floors are with 17cm bunk entrance height - Top floor is with 24cm floor entrance height - Each floor with separate Miwe FP control - Each floor can be turned on and off separately - Each floor with separate top and bottom heat control - Each floor with sepreate steam box for steam generation - With exhaust hood including fan - Stove cladding completely in stainless steel - Year of construction 2008 - 66 kW

Lunch Box, Hamburger Box. Food Box Gluing Machine The machine was only adjusted and tested Can be demonstrated on site

There are 3 used kebab box packaging machines 2x 26 oz machine 1x 16 oz Machine The one 26 oz machine serves as spare parts The other two machines can be tested on site and are still in operation If you are interested, just write to us.

Paste mixer Brand: MTI Type: P-10ADO Power: usable volume 11 litres, nominal volume 15 l Technical specifications : The paste mixer is suitable for mixing, homogenizing, dispersing and suspending low to high viscosity products, Externally heated up to 65 °C and vacuum-proof Heating cooling jacket 5 bar Product space 0.75

MORGANA Digifold Pro By combining creases and folds in a single unit, a highly productive and user-friendly mobile finishing center is created. Perforation is also possible, which optimally rounds off the range of applications. With a speed of up to 6,000 sheets per hour and a maximum format of up to 900 x 358mm, the new Digifold Pro is even more flexible in use. A large touch-screen display makes it easy to operate the Digifold Pro, as well as all other machines from the Pro generation. Versatility The Digifold Pro can be used in three different ways, depending on your needs: As a creasing machine As a folding machine As an integrated creasing and folding machine that performs both functions in a single operation. Feeder: Suction feeder pulls paper from below Paper size: max. 900 x 358 mm // Paper size min. 210 x 140 mm Paper weight max. 400 g/m² // Paper weight min.  ...

Specifications: Manufacturer: Markator Type: MV5 Needle Marker Control: ZE301 XL Needle Head: Standard Size B Marking head: MV5T0 100 x 100 Condition Condition: Used Functional: Tested and fully functional