m 520 used for sale

General SKU330W713 LocationBarneveld MakeDiosna Main Features MaterialStainless steel Volume600 Ltr. Motor38 KW Specified Features - Universal mixer Universal mixercheck Capacity600 L Vessel sizesdia. 1200x750mm With covercheck Inletdia. 125mm Pneumatic operated outletcheck Outletcheck With motor38 kW 400 volt (Ex) Rotor speed60/120 rpm With lump breakercheck With motor7.5 / 9 kW 380 volt Rotor speed1500/3000 rpm MaterialStainless steel 1.4552 General TypeP-600 Mach.No.238-027 Year of construction1993 Mounted on framecheck With switchgear(as is) Floorspace2x1 m Total height1.45 m Weight2650 kgPaints & coatingsPowdered foodsGeneric medicinesCatalysts & fillersUniversal mixersDetergent & surf.CosmeticsFood additivesLubricants & oleoConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalMinerals & inorganicDiosnaIndustries > Chemical > Paints ...

General SKU296U567 MakeDYNO-MILL WAB Bachofen LocationBarneveld TypeKD 60 Main Features MaterialMild steel/Stainless steel Volume60 Ltr. Motor45 KW Specified Features - Sand mill Horizontal sand millcheck Capacity60 Ltr. Housing dimensions Dia: 290x960mm InletDia: 30mm OutletDia: 30mm With mechanical sealcheck With jacketcheck Motor45 kW, 350/660Volt, 1475rpm Rotor speed900rpm Without ballscheck Capacitycap. range 200-1300 l/h With pumpcheck Motor0,37kW,230/400Volt, 1375rpm MaterialMild steel, stainless steel 1.4000 (aisi 429) With jacketcheck General No.910820 Year of construction1991 Floorspace2,1x1,3 m Total height1,8 m Weight1500 kgPaints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicSand millsWab BachofenIndustries > Chemical > Paints & coatingsIndustries > Food & Feed >  ...

Block Glue Press "Original MÜRO" Mobile undercarriage, Heat air blower: 1100/2150 watts Stack height: 54 cm, press width: 35 cm, press depth: 32 cm Functional with signs of wear 600,00 plus 19% VAT "Original MÜRO" block glue press Mobile base frame, Hot-Air Blower: 1100/2150 Watts Stack height: 54 cm, press width: 35 cm, press depth: 32 cm In working order with signs of wear €600.00 ( Tax free Intra-Community supply / VAT number needed )

10852025 Beverage Can Filling Line – 1500 Cans Per Hour with CASK mACS Filler (2022) High-quality beverage can filling line with integrated Cask Brewing Systems Inc. mACS can filler, manufactured in 2022 and designed for efficient small- and medium-scale beverage production. This canning line is suitable for beer, kombucha, cider, tea, carbonated soft drinks, and still beverages. The system combines reliable filling technology, flexible can handling, and low-oxygen filling performance to deliver excellent product quality and shelf stability. The line includes a semi-automatic can depalletizer, rinser, conveyor system, and CASK mACS V2.0 three-head can filling station. The depalletizer operates with forklift-assisted pallet loading, allowing cans to flow smoothly by gravity through the rinsing section and into the filler infeed system. The CASK mACS Micro Canning System utilize ...

Used Used Case Erector Mondo&Scaglione 367/C: Year: 1997 Condition: As Is Used Case Erector Mondo&Scaglione 367/C Year: 1997 Speed: 500 c/h Model: formatrice 376/c Safety protections Code: G 72 More details: https://bottlingscout.com

Used Used Case Packer Mondo&Scaglione: Year: 2009 Condition: As Is Used Case Packer TMG Meta 3 Year: 2009 Speed: 4.200 bph Safety protections. Code: JL 96 More details: https://bottlingscout.com

Used Used Hives Inserter Mondo&Scaglione 600 cph: Year: 2000 Condition: As Is Used Hives Inserter Mondo&Scaglione: Model: INSERITRICE MOD. 2001 Year: 2000 Speed: 600 Boxes/hour 1 head For empty boxes and for full Boxes Safety protections Code: AA 64 More details: https://bottlingscout.com

Used Used Case Erector Mondo&Scaglione 2015: Year: 2015 Condition: As Is Used Case Erector Mondo&Scaglione: Model: AUT MOD 300/N Year: 2015 Speed: 600 CPH Tape closure Dimensions of machinery: 2700 mm x 1400 mm x 2400 mm (h) Safety protections Code: G 96 More details: https://bottlingscout.com

Used Used Case Erector Mondo&Scaglione: Year: 2007 Condition: As Is Year: 2007 Model: 382/C Speed: 15 CPM Gluer NORDSON Hot melt Safety Protection Dimensions: 2.400 x 2400 x 1.900 h Code: G 89 More details: https://bottlingscout.com

Used Used Case Sealer Mondo&Scaglione C.R.C.E: Year: 2007 Condition: As Is Used Case Sealer Mondo&Scaglione C.R.C.E: Year 2007 Speed: 800 ? 1.500 c/h Model: C.R.C.E Automatic function system Above closure Type of closure hot melt ? hot glue Gluer NORDSON Safety protections Code: C 77 More details: https://bottlingscout.com

Used Used Hives Inserter Mondo&Scaglione: Year: 2000 Condition: As Is Used Hives Inserter Mondo&Scaglione Year: 2000 Speed: 10.000 bph Safety protections Code: AA 50 More details: https://bottlingscout.com

Used Used Hives Inserter Mondo&Scaglione: Year: 1997 Condition: As Is Used Hives Inserter Mondo&Scaglione Year: 1997 Speed: 500 c/h Model: inseritrice alveari Suitable for: Box of 6 bottles Box of 12 bottles Safety protections Code: AA 54 More details: https://bottlingscout.com

Used Used Hives Inserter Mondo&Scaglione 10.000 bph: Year: 2021 Condition: As Is Used Hives Inserter Mondo&Scaglione 10.000 bph Year: 2021 Speed: 10.000 bph Direction: Linear Model: INSERITRICE DI ALVEARI MOD. 2004 Equipped for boxes of 3?2 e 4?3 Plc Siemens F 200 S Safety protections Code: AA 56 More details: https://bottlingscout.com

Used Used Case Packer Mondo&Scaglione: Year: 1997 Condition: As Is Used Case Packer Mondo&Scaglione Year: 1997 Speed: 3.000 bph on format of 6 bottles. (500 c/h) 3.500 bph on format of 12 bottles. (300 c/h) Type: fixed head Number of heads: 6 e 12 Workable type of box: Safety protections Code: JL 260 More details: https://bottlingscout.com

Used Used Case Sealer Mondo&Scaglione CRC: Year: 2000 Condition: As Is Used Case Sealer Mondo&Scaglione CRC Year: 2000 Model: crc Speed: 2.500 boxes/hour Gluer preo Safety protections. Code: C 31 More details: https://bottlingscout.com

Used Used Case Sealer Mondo&Scaglione: Year: 1997 Condition: As Is Used Case Sealer Mondo&Scaglione Year: 1997 Speed: 500 c/h Model: incollatore crc super Closure type: with glue Gluer included Safety protections Code: C 63 More details: https://bottlingscout.com

General SKU291Y514 MakeFryma TypeML180 Year of constructionunknown Main Features MaterialStainless steel Motor11 KW Inlet diameter30 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesø 180 x 28 mm Teethed rotorcheck With hoppercheck Inletø 30 mm Outlet200 x 60 mm Motor± 11 kW, (380 V) MaterialBrass, Stainless steel 1.4408 General LocationBarneveld Floorspace0,5 x 0,7 m Total height1,15 m Weight220 kg Extra SpecificationsThroughput range 1,000–12,000 L/hr.&:nbsp:Achievable particle size 0.5–5 mm.&:nbsp:Oils & fatPaints & coatingsGeneric medicinesOintmentsBiotechnologyFeed additivesDetergent & surf.CosmeticsColloid millsFood additivesLubricants & oleoDairyConfectioneryBeveragesBiopharmaceuticalNew arrivalsMinerals & inorganicFrymaIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsIndustries > Pharmaceutical > Generic ...

General SKU291Y527 LocationBarneveld MakeKarl Schnell Type062-F282-248 Motor Motor power21 kiloWatt Main Features MaterialAluminium/Stainless steel Motor21 KW Inlet diameter200 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesø 240 x 155 mm With hoppercheck Inletø 200 mm Outlet185 x 75 mm Motor21 kW (380 V, 2880 rpm) Speed2880 rpm Material1.0257 St 44.4, Stainless steel 1.4305 (303) General No.Unknown Year of constructionUnknown With switchgear(as is) Floorspace0,6 x 0,9 m Total height1,7 m Weight500 kgOils & fatPaints & coatingsGeneric medicinesOintmentsBiotechnologyFeed additivesDetergent & surf.CosmeticsColloid millsFood additivesLubricants & oleoDairyConfectioneryBeveragesBiopharmaceuticalNew arrivalsMinerals & inorganicKarl SchnellIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsIndustries > Pharmaceutical >  ...

General SKU291Y475 MakeKarl Schnell Serial42942 Motor Motor power55 kiloWatt Main Features MaterialStainless steel Motor55 KW Inlet diameter165 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesø 220 x 50 mm With hoppercheck Inletø 165 mm Outletø 100 mm Motor55 kW (400 V 2880 rpm) Materialstainless steel 1.4006 (AISI 410) General Type080 F248 Mounted on framecheck LocationBarneveld Floorspace1,15 x 1,00 m Total height1,55 m Weight700 kg Extra SpecificationsWithout perforated disc.Oils & fatPaints & coatingsGeneric medicinesOintmentsBiotechnologyFeed additivesDetergent & surf.CosmeticsColloid millsFood additivesLubricants & oleoDairyConfectioneryBeveragesBiopharmaceuticalNew arrivalsMinerals & inorganicKarl SchnellIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsIndustries > Pharmaceutical > Generic medicinesIndustr ...

Key data: 3000 mm, 800 mm, 1000 mm

Universal machining center Travel x/ y/ z = 3000 / 800 / 1000 mm Spindle speed up to 15000 1/min Spindle drive power 30 KW - 190 Nm Tool magazine 48 Tool positions HSK 63 max. tool diameter 70/ 130 mm max. tool length 340/ 450 mm Max. table load 1500 kg Machine weight approx. 17500 kg - Pendulum operation - Coolant system - Chip conveyors - CNC control Heidenhain iTNC 530 - Integrated rotary table - Swivelling milling head horizontal/vertical

NEW, Width: 200 cm, Dead weight: 493 kg, Capacity: 1.75 m³, suitable for JCB 520-50 mount

Double vacuum laminator ICOLAM 42/24 Meier Year 2009 Spaces: 2400 x 4200 x 40 mm Total weight: 27 tons Power supply: ca 260 kW Suction volume prechamber: 630 m 3 x 2 High vacuum suction quantity: 2000 m 3 x 2 Type Icolam 42/24 Usuable working size 4.1 x 2.3m Useable sqm 8.51 6 modules per pass Laminator for the encapsulation of photovoltaic modules, is a system running parallel designed for an annual capacity of ca 75 MW, New price 1.350.000,-€ net The laminator is completely dismantled, has produced approximately 3 months of sporadic, used tracks have been hardly visibly during disassembly He is without electric and control cables, ca 10 fixed hydraulic lines are also missing. Control cabinets, vacuum pumps, documentation and accessories are otherwise completely 12 large parts are 6 m long and 3.4 m wide, DON'T go TO a UeBERSEECONTAINER CA 3 trailers material

- Capacity 2,000 litres - Motor power: mixing screw:3.0 kW,swivel arm:0.55 kW - Usable volume approx. 1,600 litres (depending on product characteristics) - Container and lid parts are made of stainless steel 1.4301 (V2A) - Swivel arm and transmission parts are made of normal steel - 1st side outlet is made of stainless steel 1.4301 (V2A) - All lubricants are H1 and halal approved and certified

- Capacity 10,000 litres - Stainless steel container V2A - Gearbox new product - Swivel arm made of standard steel New product - Container made of stainless steel V2A new product - Mixing screw stainless steel V2A new product - Pneumatically driven new product - Drive motors 11 kW & 1.0 kW new product

Rühle Tumbler MKR 600, with vacuum, scraping arm, container size 600 liters, LED control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, with loading device, comfortable emptying of the goods by standard carriage size, refurbished. The machine is currently in the overhaul and can be tested in Koblenz, Germany.

MTI P-10 laboratory mixer The laboratory mixer is suitable for mixing, homogenizing, dispersing and suspending of low-to high-viscosity products, heated, pressure and vacuum resistant Heating cooling jacket 5 bar Product space-1 / 0.75 bar Tank 15 l, Volume 11 litres. The machine includes two containers heated, presses a vacuum pump and a dispensing device to high-viscosity products from the mixing container. The documentation is available.

Capacity: 8,000 litres water filling Volume: approx. 7,000 litres Bulk density: max. 0, 6 kg / litre Maximum filling: 4200 kg •Bowl, cover, swivel arm, mixing screw, spout housing made of V2A Traverse from mild steel, is covered but to the tank interior with a V2A plate. -All lubricants are H1 & halal approved and certified ATEX Zone 21 Consideration and introduction of the ATEX zoning 21 within the mixer. -Infrarot sensor Temperature monitoring tips storage with PT 100 Dampers manhole Explosion protection document Monitoring unit with temperature display

Rühle Tumbler MKR 150, with vacuum, mixing- and scraping arm, container size 150 liters, adjustable Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 50 rounds per minute, all stainless steel, comfortable emptying of the goods by standard carriage size. You are very welcome to test the machine in our facility in Koblenz, Germany.

Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.

Rühle Miknetum MGR 1500, newest generation of Tumbler, year of construction 2008, with vacuum, mixing arm, container size 1500 liters, filling size 900 Liters, intelligent Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, feed spindle as loading device, comfortable emptying of the goods by standard carriage size. You are very welcome to see the machine at our facility in 56070 Koblenz, Germany.

Ruhle Miknetum MGR 900, newest generation of Tumbler, with vacuum, mixing arm, container size 900 liters, filling size 675 Liters, intelligent touch-PC control, direct cooling by strong cooling unit, mixing and kneading , up to 25 rounds per minute, all stainless steel, loading device, comfortable emptying of the goods by standard carriage size You are very welcome to test the machine in our facility in Koblenz, Germany.

A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...

Ruhle MKR 220 high tech tumbler with cooling and vacuum.

FORCIPOL - the quality grinding machine / polishing machine for metalography that is cheap on the market - from the simple grinding machine for manual preparation to the semi-automatic machine - The FORCIPOL series is modular and can be assembled as required FORCIPOL 102: Basic grinding machine / polishing machine with a grinding wheel 250 mm and basic control FORCIPOL 202: as before, but 2 grinding wheels 250 mm For rationalization and reproducible cuts (can be combined with FORCIPOL 102 or 202): FORCIMAT 52: Sample wineer head with simple control FORCIMAT 102: Sample winer head with programmable control For the supply of lubricants and suspensions (only IN the case of FORCIMAT 52 / 102) DOSIMAT 12 - Lubricant Dosing Device DOSIMAT 52 - Lubricant and suspension dispenser (adjust integrated internal control on the device) DOSIMAT 102 - Lubricant and suspension dispenser  ...

Rühle Tumbler MKR 300, Ruehle Hightech Tumbler with vacuum, incl. mixing and tumbling arm, container size 300 liters, Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, with loading device. You are very welcome to inspect the machine at our facility in Koblenz, Germany. If you have any questions, please do not hesitate to contact us.

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...

Blender Talsa MIX95P; 400 V, new, Bowl capacity 95 litres, engine completely in stainless steel, separate stirrer and Bowl drive, 1 speed, forward and return, Bowl tilt, Dimensions Lxwxh approx. 108x80x120cm, weight 170kg New machine, built in 2018

Stock # U2267-2 Second hand stainless steel contact parts (316Ti) sand mill by Drais (Germany) model Perl-mill PMC 12.5 TEX. Machine has total volume of milling chamber 17.2 l and working volume about 12 l. Mill has rotor with plastic rings and works with rotation speed up to 1450 rpm. Machine is driven via belt gearbox by electric motor 13.5 kW, 1500 rpm, 400 V, 50 hz, Eex eIIT3 design. Mill is equipped with feeding pump, filter and electric cabinet. Includes technical documentation. Machine new 2002.

with mixing and Meng arm cooling vacuum

New machine - Contents: 1,000 litres when water is filled - Usable volume: approx. 800 litres depending on product characteristics - Maximum filling weight 1,000 kg - The mixer has a central bottom outlet - Containers, lids, swivel arm, mixing screw, V2A outlet housing

The servoCUT 402 / 502 / 602 cutting machines is designed as a wet cutting grinding machine for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramic or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERV ...

The SERVOCUT 602 cutting machine is designed as a wet cutting grinder for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramics or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERVOCUT cutting machines ...

Machine base soil tillage machine, floor cleaning machine, floor curing machine -Manufacturer: Minuteman, Multi-Clean machine base tillage machine -Type: 670691 UV-8 Power Supply -Voltage: 230V -Dimension: 600/440/H370 mm -Weight: 29 kg

High-performance pneumatic embossing machine Pneumatic embossing machines allow the reproduction of embossing designs on various materials such as leather, plastic, synthetics, non-woven fabrics, flock, and others using pressure and temperature. This can be used for signs, logos, decorations, or lettering. By branding your products, you can strengthen customer loyalty to the guaranteed quality, aesthetics, and durability they associate with a particular brand or logo. The machine is equipped with: - Temperature control - Cycle time control - Belt feed length control - Clamping force control - Manually extendable/retractable table The machine is in perfect, like-new condition.

Permanent Overbelt Magnetic Separator TYPE DMPM1400 1.600 x 900 x 220mm = Solid steel construction, welded Welded & painted construction RAL 7016 (anthracite grey) Magnet dimensions: 1.000x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm spherical overtightened, shaft fixed with tension bearings. Drive: Slip-on geared motor GEMOTEG 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5,4mm thick Conveyor belt width: 700mm 7 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply particularly transversely stable Equipped with stainless alligator connectors RS125 Magnet Features: Built-in magnetic core: Strontium Ferrite Y30 Bonded SfRe strontium hard ferrite  ...

For Sale Used Corundum Disc Mill / Mustard Mill MK95

BACCI multiple oscillating mortiser mod. MX90 - 5+5 horizontal spindles - 2+2 vertical spindles - Selectable spindle revolutions motor per motor. . laps 1' 6000/12000 - Max. slot inclination 20° - Tilt to and from the outside – standard -7° + 30° - Max. distance between spindles 1280 mm - Matr. 228 - CE standards - Year 1999 - Complete with manual and CE declaration

Semi-automatic bending, pipe bending machine, mandrel bending machine MOBITEC type BAH 1-2KOTTMANN and BERGER GmbHFabr. No. 056 Year of construction 09/2004- for simultaneous bending of two pipe sections made of steel up to 12 mmBending angle max. 90Pipe diameter max. 12mmMandrel length approx. 65 mmNominal power 3.5 kWDreturn air max. 6 bar / approx. 1 litre per bending cycleMains connection 400 volts, 50 Hz- Pneumatic clamping- Pneumatic mandrel retraction- Control for angle input via STOBER Controlbox Series 4000/5000- Control SIEMENS