m 520 used for sale

Stock # U2423-1 Used stainless steel conical nauta type powder mixer by Pharming type HV 1000 (CZ). Cone has diameter 1550 mm x height 2200 mm. Total volume of tank about 1700 l, working volume up to 1000 l. Total height 324 cm. Standard mixing screw is top driven by el. motor 3 kW, 970 rpm, 230-400 V, 50 hz, and supported by bottom pintle bearing. Arm rotation - 2 rpm. Screw rotation - 60 rpm. Discharge via bottom rotary slide outlet valve, operated manually. Mixer is mounted on 3 lugs with carbon steel supports. Included technical documentation. Shipping dimensions: length 330 cm x diameter 170 cm x weight approx 1000 kg. Machine had been working in food industry.

Foldingmachine 24P Make MBO Model K800.S 4SKTZ - FP Year 2008 Size Min: 150 x 210 mm / Max: 780 x 1200 mm Feeder MBO FP120 pallet feeder - with MBO Vaculift sheet seperation head and MBO Vacubelt suction belt VIVAS suction alignment belt, slitter shafts prior to entering buckle station, exit to left or right by turning the section Folding configuration 4 platebuckles + 2 knives + 1 buckles after the first knife Delivery OMG Economic P700 pright delivery with pressing Number of pages 16-24 pages for signatures Details Vacuum pump, noise hoods, MBO Navigator controls Available direct

Stock# U2423-2 Used stainless steel conical nauta type powder mixer by Pharming type HV 600 (CZ). Cone has diameter 1440 mm x height 1855 mm. Total volume of tank about 1300 l, working volume up to 600 l. Total height 2770 mm. Standard mixing screw is top driven by el. motor 3 kW, 965 rpm, 230-400 V, 50 hz, and supported by bottom pintle bearing. Arm rotation - 2 rpm. Screw rotation - 60 rpm. Discharge via bottom rotary slide outlet valve, operated manually. Mixer is mounted on 3 lugs with carbon steel supports. Included technical documentation. Shipping dimensions: length 277 cm x diameter 180 cm x weight 600 kg. Machine had been working in food industry.

Technical data (subject to change) Working width approx. 500 mm Chip depth as well as hollow and pointed joint indication Speed approx. 5,000 rpm Swivelling dressing stop Brake via foot pedal Weight approx. 950 kg

Mueller Label Weaving Machine (Used) Model MBJ3 Year 2007 Jacquard 1152 Hooks 5800 yarns. Accessories on the machine: - 6 weft feeders 2 beams 2 cloth rollers new harness Droppers.

Tool pressetter Needs new computer and software Estimated price 2022 from producer € 4500,--

Used packaging machine MC2 DT with transporter MCA4 DB. 3 pieces available. New 2011-2013. Technical data: Type of machine - wrapping machine (double twist) Operation - electromechanical, Mains supply - 230/400 B 3 phases + U Frequency - 50 Hz Operating pressure - 6 bar Flow rate - 0.5 Nl/min Weight - 1700 kg

Edge banding machine with joining unit Alternating pool Automatic edge magazine up to 5 mm strips Clip Flat milling round Pulling blade edge Flat brick blade Brush / Scabible

Electric motor, three-phase motor -Manufacturer: Verhagen, electric motor type MR56B4 -Power: 0.09kw -Speed: 1325 rpm -Shaft: Ø 20 x 50 mm -Construction: B14 -Protection class: IP 55 -Dimensions: 200/114/H150 mm -Weight: 3.9 kg

Geared motor, electric motor, electric geared motor -Manufacturer: Motovario gearbox type NMRV/030 -Speed: 91 rpm i 15.0 -Engine: Neri Motori type T56B4 -Power: 0.09 kW / 1360 rpm -Hollow shaft: Ø 14 x 60 mm -Protection rating: IP55 -Dimensions: 265/110/H155 mm -Weight: 4 kg

Corner transport table Left-Right Make MBO Model ET46 Year 1995 Width 460 mm Details corner roller table that can be flipped over to turn your products left or right, adjustable in height, new drive belt installed Available direct

Farrel Bridge 12” x 6” Two Roll Mill Year (July) 1988 Crompton Parkinson Motor 380volts

Continuous Mixer (UP1) Manuf.: Pomini Farrel Year 1982 Model: 9LCM 230 + Extruder 12” Diam. 230/304mm L/D ratio: 14:1 Speed (rpm) 80 / 447 (LCM) Power (kW): Extruder: 300kW LCM: 900kW Continuous Mixer (UP2) Manuf.: Pomini Farrel Year 1986 Model: 9LCM 230 + Extruder 12” Diam. 230/304mm L/D ratio: 14:1 Speed (rpm) 80 / 447 (LCM) Power (kW): Extruder: 300kW LCM: 900kW

Farrel Bridge Lab BR Mixer Steam / water pressure gauges Burrell process timer BHI control Capacity of chamber 1.6 litre Motor With Gearbox

Mounting plate, mounting module -Manufacturer: murrelektronik, 2 pieces MP 6 mounting plate with 2 resistors -Art.No: 62001 -Price/tax: complete -Dimensions: 65/45/H35 mm -Weight: 0.1 kg/pc.

Merkle Slitter 500mm wide

Wire-O closing machine Make JBI Model MAG C54 Year 1991 Workingwidth 540 mm Details for closing all sizes Available Direct

Type 1300-2S Working width 1300 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Total motor power 6.27 kW Transport dimensions 1700x2100x1400mm Weight 1200 kg Price 6100 Eur (EXW Jonava, Lithuania) Specifications Type 1300-2S Working width 1300 mm Min. Working length 400 mm Working thickness 5-140mm Grinding shaft speed – adjustable by frequency converter Feed speed 5-20 m/min The total power of the motors is 6.27 kW Dimensions for transportation 1700x2100x1400mm Weight 1200 kg Price 6100 Eur (EXW Jonava, Lithuania)

Type 1000-2S Working width 1000 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Total motor power 4,12 kW Transport dimensions 1700x1600x1400mm Weight 800 kg Price 4130 Eur (EXW Jonava, Lithuania) Specifications Type 1000-2S Working width 1000 mm Min. Working length 400 mm Working thickness 5-140mm Grinding shaft speed – adjustable by frequency converter Feed speed 5-20 m/min The total power of the engines is 4.12 kW Dimensions for transportation 1700x1600x1400mm Weight 800 kg Price 4130 Eur (EXW Jonava, Lithuania)

Moving bezel, moving bezel, bezel, steady rest, lynette -Manufacturer: Meuser, steady rest from lathe M4L -Max. Passage: Ø 180 mm -Center height: 315 mm -technical drawing: with the photos -Dimensions: 520/535/H560 mm -Weight: 32 kg

Bezel traveling, moving bezel, bezel, steady rest, lynette -Manufacturer: Meuser, bezel from lathe type MV SKV/2-1 -Bezel: driving -Max. Passage: Ø 170 mm -Center height: 230 mm -technical drawing: with the photos -Dimensions: 520/405/H510 mm -Weight: 33kg

Gerstel / CTC Mutlti Purpose Sampler MPS complete For the LC as well as GC YOC 2014, tray for 98 vials (2ml), gas-tight injection syringes

Electric motor, three-phase motor -Manufacturer: ZSE MEZ, electric motor type 4AP90s-4 -Power: 1.1kW -Speed: 1410 rpm -Shaft: Ø 24 x 50 mm -Protection class: IP 44 -Dimensions: 290/175/H210 mm -Weight: 12.3 kg

Agilent 5973 MSD Detector,Network/LAN Connector, Diffusion pump, completely overhauled

Agilent 5973N inert MSD with GC Agilent 6890 N Agilent 5973 N inert MSD with GC Agilent 6890 N Network Agilent 5973 inert MSD with EI and turbomolecular pump enhanced BOC Edwards Turbopump Agilent GC 6890 Network with Split/Splitless Injector/EPC Edwards Vacuum Pump 1.5 MSD Productivity Chemstation E02.02 on PC/Win 10 NIST on request Option: Agilent Liquid Sampler, CTC or Gerstel MPS2 Sampler currently serviced/with warranty Installation on request

Bead mills Manufacturer: Bachofen AG (CH) Type: Dyno-Mill KDL-Pilot 3 items on stock No.: 1) 910969; 2) 860739; 3) 840338 Power: 3.3 kW in Eex protectioin very good condition with various spare parts LWH: 650 x 500 x 500 mm

Control module, compact control unit, fan coil control, electronic module -Manufacturer: Meitav-tec, Universal Fan Coil Control -Type: MIGA1-FC-SUPER -Operating voltage: 230 volts -Cardboard dimensions: 170/90/H45 mm -Weight: 0.5 kg

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve -Manufacturer: Festo, solenoid valve -Type: CPE14-M1BH-5J-1/8 -PN: 2 - 8 bar -Dimension: 135/15/H40 mm -Weight: 0.1 kg

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve -Manufacturer: Festo, solenoid valve -Type: VMPA1-M1H-NP Mat. no. 533348 S302 -PN: 3 - 10 bar -Dimension: 110/40/H15 mm -Weight: 0.1 kg

Manual transmission, throttle grip, throttle lever, drive lever, control lever, direction lever for outboard motors, outboard motor, outboard engine, boat engine -Hand shift: Throttle grip, unfortunately without type designation -Dimensions: 650/180/190 mm -Weight: 1.4 kg

metal band saw blade, band saw blade, metal saw band -Manufacturer: Eyltool, metal band saw M42 unused -Type: M42 2060x20x0.9 ZpZ 8/12 -Number: 10x metal saw band available -Price per piece -Transport dimension: Ø 230 / 40 mm -Weight: 0.3kg/pcs

Agilent 5973 N MSD Detector with Edwards turbomolecular pump or diffusion pump, used and refurbished on request also complete as measuring station with Agilent 6890GC Please inquire about the price per piece

Machine Details Stock-No. 1105-03904 Type of machine Machining Center - Vertical Make MAZAK Type VCS 530 C II Year of manufacture 2014 Type of control CNC Storage location FRANCE Country of origin JAPAN Delivery time immediately Freight basis EX WORKS Technical details X-Travel 1740 mm Y-Travel 530 mm Z-Travel 510 mm control MATRIX 2 Table dimensions 2 350 X 500 mm distance spindle nose and table 180 - 690 mm distance spindle center to column: 610 mm table load 1200 kg Rapid Travel X/Y/Z 42 m/min feed range 1 - 8000 mm/min turning speed range: 40 - 12000 min-1 spindle taper CAT 40 tool magazine: 30 seats Tool diameter 80 mm Workpiece weight max. 8 kg tool length - max. 350 mm connected load 40 kVA voltage 400 / 50 V / Hz Additional information VERY NICE MACHINE WITH CONVOYER WITH CONTROL MAZAK MATRIX 2 COOLING TROUGHT THE SPINDLE

Recycling machine trade AGICOM- Pedergnana OG: Cable peeling machine MAXI 100 DEMONSTRATION UNIT The compact MAXI 100 cable peeling machine can be used to process cables with a diameter of 6 mm to max. 90 mm. Thanks to the tried-and-tested two-knife system, the cable insulation is cut open and the copper or aluminium core can be easily removed.

Technical data of the FPT Pragma M40 mobile column milling machine used: Longitudinal travel: 4000 mm Vertical travel: 1600 mm Transversal travel: 1200 mm Working feeds: 0-15000 mm/min Fast feed: 30000 mm/min Maximum thrust on axes (X,Y,Z): 2000 from N Spindle motor power (continuous service S1): 28 kW 38 hp Spindle motor power (intermittent service S6-60%): 35 kW 47,6 hp Constant torque spindle speed range: 0-312.5 g/min Spindle speed range at constant power. 312.5-5000 rpm Maximum spindle torque (continuous service S1): 856 Nm Maximum spindle torque (intermittent service S6-60%): 1070 Nm Supply voltage: 50Hz Current consumption: 119,2A Total installed power: 65 kW 88,4hp

Vertical lathe MORANDO 3000 for sale Technical data: X axis: 1500 mm Axial travel: 1200 mm Turning diameter: 3100 mm Maximum turning height: 1840 mm Platform diameter: 3000 mm Maximum table load: 47000 kg Spindle power: 52 KW Number of spindle revolutions/minute: 100 rpm CNC: Siemens 840D

electric motor, three-phase motor -Manufacturer: Motek, electric motor type ET564c-4 -Power: 0.12 kW -Speed: 1310 rpm -Shaft: Ø 9 x 20 mm -Design: B14 -Protection class: IP 55 -Dimensions: 190/110/H150 mm -Weight: 3 kg

MAZAK Laser Cutting Machine STX3015 4kW TOP CONDITION – OVERHAULED IN 2023 Year of construction: 10/2015 very well preserved, overhauled MAZAK laser machine with 4000W Panel format: 3000mm x 1500mm minimum installation area of 2.9m x 7.3m Small parts conveyor belt LAN/USB connection automatic nozzle change automatic focus position adjustment Quick piercing into thick materials Plasma sensor for stainless steel cutting Piercing sensor for piercing Burning sensor for monitoring when cutting structural steel Completely encapsulated machine cover no foundation necessary FE: up to 22mm VA: up to 15mm ALMG: up to 10mm Plastic possible incl. software incl. warranty incl. suction incl. commissioning + training =optional with fully automatic loading and unloading=

Folding knife Morgana Digifold / MORGANA ET FIRST DIGIFOLD BLADE ASSEMBLY f. Art.: PS4102 Ersatzteil Nr. / parts No126-12-01

Mayr EAS overload clutch with sprocket 12 B1 Z 23 Bore ø 30 Height 64 No. 2/490.720.0SX0911968 160-400 Nm

Bolts, hex bolts, flange nuts, hex nuts, collar nuts -Hexagon nuts: M 20 flange nuts with locking teeth 3650 pieces -Type: DIN 6923-8 A2L M20 SERR -Price: complete -Total weight: 355 kg

Manometer, test manometer, pressure gauge with Bourdon tube, pressure and temperature measurement technology -Manufacturer: Rich. Matthes, manometer -Type: 0 to 10 bar -Screw connection: see photos -Dimension: 135/110/H135 mm -Weight: 0,7 kg

Kitchen slicer, crooked, type KSSM-V 1.4 D

Starter motor, diesel engine, drive motor, marine diesel engine, diesel generator -Manufacturer: Bosch, starter motor from MWM RHS 518V16 generator -Type: Bosch 0 001 510 003 -Voltage: 24V 9PS -Teeth: 11 -Dimensions: 445/150/H210 mm -Weight: 26 kg

diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump, diesel generator, diesel generator -Manifold: from generator MWM RHS 518V16 -Dimensions: see photos -Total dimensions: 800/210/H70 mm -Weight: 8.7 kg

Chassis, electric motor, DC motor, traction motor, drive motor, steering motor -Manufacturer: Jungheinrich, steering motor from pedestrian stacker type ERC 205 -Type: GNM 5460-G18.5-MIR1 Ser. H -Motor: 24V/240W -Dimensions: 140/130/H360 mm -Weight: 7.5 kg

Chassis, electric motor, DC motor, traction motor, drive motor, steering motor -Manufacturer: Jungheinrich, steering motor from pedestrian stacker type ERC 205 -Type: GNM 5460-G18.5-MIR1 Ser. H -Motor: 24V/240W -Dimensions: 135/130/H365 mm -Weight: 7.5 kg

Chassis, electric motor, DC motor, traction motor, drive motor, steering motor -Manufacturer: Engel, steering motor from Jungheinrich ESE 320 G 20-240.54 electric stacker -Type: GNM 5460-G18.5-MIR1 Ser. H -Motor: 24V/240W -Dimensions: 135/130/H365 mm -Weight: 8 kg

Manometer, test manometer, pressure gauge with Bourdon tube, pressure and temperature measurement technology -Manufacturer: Wika, manometer -Type: 0 to 100 mbar -Screw connection: see photos -Number: 1x manometer available -Price per piece -Dimension: 140/100/50mm -Weight: 0.5 kg/pcs

live center, live center, live morse taper, live center, live lathe center, live center -Manufacturer: WMW ABW Live center -Type: ZN 203 -Intake: MK3 -Number: 11x center point available -Price per piece -Total dimensions: Ø 54 x 167 mm -Weight: 0.9 kg/pc.