m 520 used for sale

Brand: Martin Type: T25 M-No.: V172604 Year of construction: 1990 Motor power: 5/6 kW Swivel milling spindle: -5° - +45° Milling mandrel : 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Cone of the milling spindle: MK5 Table size: Table extension 2,500 mm and table distribution (= extendable support) Automatic milling spindle start-up/bremzing via rotary knob Control panel: eye level with digital reading Spindle height -5° - +45° electromotive angle adjustment with digital readout Inclination -5° - +45° 150 mm Electromotive heights Adjustment with digital readout Feed: five-pole. Socket with operation via central control

Three-phase motor, electric motor -Motor: is unused -Power: 15 kW -Speed: 2930 rpm -Shaft: Ø 42 mm -Construction: B35 -Protection class: IP 54 -Dimensions: 650/400/H350 mm -Weight: 98 kg

Swing Chiselstemmer Measuring machine Stemmer swing chisel

approx. 452 shelves Meta, 1m x 0,40m / 0,60m - used - : Price per shelf: 8.-€ (net)! Minimum order: 50 pieces Manufacturer: Meta Type: Meta Clip Year of construction: unknown Depth: 60cm Width 1m = approx. 52 pieces Depth: 40cm Width 1m = approx. 400 pieces Shelves are partially knocked out or slightly bent on the holders for the floor supports. But a blow with the hammer should be enough so that they can be hung up again without problems. Height: approx. 4cm Payload: unknown – would have to carry at least 100kg Condition: good Available: as of now Location. Frankenberg / Saxony

Three-phase motor, electric motor -Power: 3 kW -Speed: 1430 rpm -Shaft: Ø 32 mm -Design: B5 -Protection class: IP 44 -Dimensions: 445/252/H320 mm -Weight: 50 kg

Lawn building machine Sembdner RS 60 R, working width 60 cm, drive F&S 2-stroke petrol engine. Reversing gearbox for forward and reverse travel. Equipment: smooth roller with scrapers at the front, hedgehog with cleaning cage in the middle, smooth roller with scrapers (water-fillable) at the rear, seed container with brush shaft and dosing slide. Technically good condition, but with flash rust and engine without ignition sparks - does not start. Branded product from Munich (Germany). Shipping optionally possible.

For sale, completely overhauled flour packaging machine 1kg. The machine includes a auger feeder with a mixer as well as an automatic gluer. Capacity approx. 1t per hour (20kg/min).

Martin T45 Thickness Planer Brand: Martin Type:T45 Main motor 5.5 KW - 400 V Speed 5,000 or 6,000 tpm Knife shaft Z-4 Tersa Flight circle ø125 mm Planer width 6,300 mm Planer thickness 2.8 - 300 mm Spahn removal max. 12 mm Thickness table length 1,260 mm Feed 6-12 m/min. weight 1.500 KG Condition: NEW Price Dealer price: Options: Planing shaft: X-Plane planing shaft with 4-fold reversible blade T45 Contour: Machine for profiling, with Z-4 Tersa, Z-2 Contour profile inserts T45Plastic: Machine especially for plastic processing Motor 7.5 KW, 11 KW and frequency controlled Thickness table extension: import and export side640 mm or 1,200 mm Feed: Frequency control from 2 to 25 m/min. Indent: Articulated feed whales Pull-out whales: Second pull-out whales Machine lubrication: Central with hand pump or automatic Table bezel: import has been atta ...

Brand: KAMRO Type: DAK510 Year of construction: 1978 Planer width dresser/thickness planer: 530 Knife shaft: ø120mm, Z-4 tersa or X-Plane Speed: 5,000 rpm Motor: 4 KW Feed rolls: imports Toothed steel, Export rolls: rubber Planing height: 3 - 250 mm Table length dresser: 2,300 mm Table length thickness table: 920mm Chip removal: 8mm Feed: 6/12 m/min weight: 1050 KG Options: X-Plan Wave SuvaMatic Motor: 5.5 KW or 7.5 KW Open table electrically Feed frequency control

Three-phase motor, electric motor -Power: 3 kW -Speed: 1420 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 390/250/H280 mm -Weight: 37 kg

:::SPECIFICATIONS::: CNC Model: Siemens Tool connection: SK 40 Spindle power: 9Kw Number of spindle revolutions: 12000 Number of tools: 30 X Shaft Stroke: 600mm Y-axis stroke: 450mm Z-axis stroke: 450mm Rapid feeds linear axes X Y Z: 35m/min Guides: roller Tilting rotary table: yes Round table type: continuous Tilting rotary table grades: + - 110° Table size: diameter 280mm Load allowed on the table: 200Kg Chip evacuator: carpet Other technical data: maximum tool diameter 80 (125) mm Chip/chip time change 5.5 sec Working feed speed 1 - 30.000 mm/min Resolution 0.001 mm :::D IMENSIONS AND WEIGHT::: Length: 3500mm Width: 3500mm Height: 2800mm Weight: 6500Kg

Brand: Martin Type: T54 Year of construction: New Motor power: 5.5 kW Knife shaft speed: 5,000 tpm Knife shaft: Z-4 Tersa, ø125 mm Planer width: 5000 mm Spahn removal: max.8 mm Table length: 2.850 mm Task - Table length: 1.640 mm Removal - table length: 1.200 mm Table height: 855 mm Dressing stop: Aigner stop, 45°Movable with dunn material planing strip weight: 1.200 KG

Gear motor, electric motor, electric gear motor -Speed: 5 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter hollow shaft: 25 mm -Protection class: IP 55 -Number: 1x motors available -Price: per piece -Dimensions: 570/160/H215 mm -Weight: 18.2 kg

Many thanks for your interest in our machinery, please find below our offer: Manufacturer : Low & Duff (Ladco) Macintyre Type : PG 50_Pre-Blend / Pre-Mix Refiner System Batch : 5000kg Year of made : 2004 Electrical : 400V 50 Hz, 3Ph Enginepower : 30 kW Maindrive engine different : Chocolate Pump : on Top is installed a Mixer with small 2-Roll Refining Unit with re-circulation Pre-Refine the mass prior then to transfer to bulk chocolate refining/conching, to create a cleaner environment, and reducing time & costs to produce high quality chocolate.

Gear motor, electric motor -Speed: 31 rpm -Power: 0.55 kW -Brake: 380 V -Construction: B3 angle -Diameter hollow shaft: Ø 25 mm -Protection class: IP 45 -Number: 1x motors available -Price: per piece -Dimensions: 510/228/H260 mm -Weight: 25 kg

Folding machine Make MBO Model T49-4 Year 1984 Maximum size 490 x 850 mm Configuration Feeder Flatpile feeder 1st station 4 plate buckles 490 mm Delivery belt delivery Details with batch counter, noise hoods, vacuum pump Available direct

Gear motor, electric motor, three-phase motor -Speed: 93 rpm -Power: 0.55 kW -Construction: B3 angle -Diameter hollow shaft: 24 mm -Protection class: IP 45 -Dimensions: 220/240/H525 mm -Weight: 23 kg

Gear motor, electric motor, electric gear motor -Speed: 22.5 rpm -Power: 0.55 kW -Construction: hollow shaft -Diameter hollow shaft: 28 mm -Protection class: IP 54 -Dimensions: 530/200/H260 mm -Weight: 24 kg

Basic features: X axis travel: 6.000 mm Y axis travel: 900 mm Z axis travel (vertical travel): 2000 mm automatic head index 2,5° spindle speed 3.300 rpm spindle taper ISO 50 stolle floor: 7000x1500 mm - nr. 6 T-slots rotary table B axis 360 positions - 5 ton load capacity CNC Heidenhain TNC 426 chip conveyor ATC 60 Total power: 60 kW - 380 V machine in excellent conditions, ready to work. NB: The aforementioned technical data, taken from the manufacturer's technical data sheet, are to be considered non-binding and subject to change without notice.

Electric motor, three-phase motor, brake motor -Power: 1.8 kW -Speed: 1430 rpm -Shaft: Ø 24 mm -Hole circle: Ø 165 mm -Rezess: Ø 130 mm -Construction: B5 -Brake -Price: per piece -Number: 2x available -Dimensions: 430/200/H260 mm -Weight: 30 kg

Three-phase motor with 2 speeds, electric motor -Power: 1.3/1.8 kW -Speed: 700/1440 rpm -Shaft: Ø 28 mm -Design: B5 -Protection class: IP 44 -pole-reversible -Price: per piece -Quantity: 1 available -Dimensions: 500/300/H250 mm -Weight: 54 kg

geared motor, electric motor -Speed: 32.5 rpm -Power: 0.55 kW -Design: B5 angle -Hollow shaft diameter: Ø 25 mm -Protection class: IP 44 -Quantity: 1x motor available -Dimensions: 470/155/H240 mm -Weight: 19.1 kg

Stock No. 2680 1x partially overhauled and functionally tested Compounding extruder double screw, co-rotating intermeshing Segmented screws and cylinder barrel (water cooled) Screws 2x 64 mm - 40 L/D Screw speed up to 1200 rpm-1 Drive 482 kW-DC Gearbox Flender safety coupling atutomatik 3x degassing venting ports ( vacuum pump optional for extra charge ) 2x side feeding dosing extruder type ZSFE 50 twin screws with dm 48.5 mm with 4 kW each, speed up to 800 rpm.-1 Control cabinet with Siemens HMI Touch OPTIONAL at extra cost: 1) Screen-pack-changer changer 2) Vacuum pump 3) Pelletizing: ST strand, - WRG waterring or - UWP underwater pelletizing system 4) Granulate classifying sieve 5) gravimetric loss-in-weight blender / dosing system 6) Material conveying 7) Big-bag filling station 8) Start-up by our technicians Visit to our factory in Wuppertal.  ...

Diaphragm press Friz type MFP 15/27 • Cover table size (mm): 2700 x 1500

Servo motor, electric motor, DC motor, stepper motor, stepper motor -Speed: 2500 rpm -Power: 4.5 Nm -with gearbox ratio: 1:10 -Design: B14 angle -Shaft diameter: Ø 25 mm -with Hohner encoder 11322 -Quantity: 1 motor available -Price: per piece -Dimensions: 480/260/H180 mm -Weight: 10.3 kg

Servo motor, electric motor, DC motor, stepper motor, stepper motor -Speed: 2500 rpm -Power: 4.5 Nm -Design: B14 -Shaft diameter: Ø 16 mm -with Hohner encoder 267AB -Number: 1 motors available -Price: per piece -Dimensions: 400/100/H145 mm -Weight: 9.3 kg

: R10-R260 bending speed: 2,5 U/min : 42x3 mm : 42x2,5 mm : 30 mm : 54x2 mm total power requirement: 1,5 kW weight of the machine ca.: 80 kg dimensions of the machine ca.: 410x1000x570 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, three-phase motor -Speed: 28 rpm -Power: 0.25 kW -Construction: B5 angle -Diameter hollow shaft: Ø 24 mm -Protection class: IP 45 -Dimensions: 460/215/H160 mm -Weight: 18 kg

technical details: - Thermal press for printing textiles (T-shirt, caps, towels, carrier bags, etc.) - Contact surface: 38 x 38 cm - Power: 1,750 W - Voltage: 230 V - Current: 7.5 A - Frequency: 50/60 Hz Shipping is of course possible. Shipping is plus freight and packaging costs, depending on size and weight. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

Gear motor, electric motor -Speed: 76 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Dimensions: 380/160/H190 mm -Weight: 14 kg

Electric motor, three-phase motor -Power: 15 kW -Speed: 2910 rpm -Shaft: Ø 42 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 580/350/H395 mm -Weight: 95 kg

Three-phase motor, electric motor -Motor: unused -Voltage: 500 volts -Power: 11 kW -Speed: 2920 rpm -Shaft: Ø 38 mm -Construction: B35 -Protection class: IP 55 -Dimensions: 500/345/H300 mm -Weight: 65 kg

Inv. Num. : 6435 Type: MTX Flex 6 Producer: Euromac Generated: 2014 Parameters: Software: RADAN Operating hours: 19932 h Switch-on hours: 12452 h Compressive force: 30 t Machine height: 1900 mm Machine length: 4840 mm Machine width: 3630 mm Equipment: Multitool Flaps

Vertical lathe MORANDO 2000 for sale Technical data: - X axis: 1600 mm - Axial travel: 900 mm - Turning diameter: 2100 mm - Maximum turning height: 1350 mm - Platform diameter: 2000 mm - Maximum table load: 21000 kg - Spindle power: 75 Kw - Spindle revolutions/minute: 110 rpm

Permanent magnet motor, permanent magnet motor, electric motor, permanent magnet motor, permanent magnet motor, servo motor -Max. Speed: 1500 rpm -Shaft: Ø 32 mm -Number: 1x motors available -Price: per piece -Dimensions: 595/192/H245 mm -Weight: 60 kg/piece

Metal band saw blade, band saw blade -Condition: unused in original packaging -Number: 5x sheets available -Price: per piece -Toothing: 4/6 -Dimensions: 2085 x 20 x 0.9 mm

MECA Thermoformer Type: 650 Number: T02126 Year of construction: 07/04 Distance between chains: 500 mm Dye's: (4x) 210 mm x 170 mm, total dimensions: 7300 mm x 1300 mm x 2470 mm Including large amount of parts.

1 GALAN fancy yarn twister type Mini PR-F/3 MP, 6 spindles, ring diameter 120 mm, tube adjustable up to 500 mm, fully electronic control through step-by-step motors, electronic programmer type GTG-S-6. This machine was bought for a laboratory and has never really been used

Gear motor, electric motor -Speed: 30 rpm -Power: 0.45 kW -Construction: hollow shaft angle -Diameter hollow shaft: Ø 24 mm -Protection class: IP 54 -Brake -Number: 1x geared motors available -Price: per piece -Dimensions: 375/160/H275 mm -Weight: 12.5 kg

Electric motor, three-phase motor -Power: 0.37 kW -Speed: 1420 rpm -Shaft: Ø 14 mm -Brake -Construction: B5 -Protection class: IP 54 -Number: 2x available -Price: per piece -Dimensions: 330/160/H205 mm -Weight: 13.1 kg

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Manufacturer: Festo -Type: MFH-5/2-D-2-FR C -Magnetic valve -PN: 3-10 bar -Number: 1x valve available -Price: per piece -Weight: 0.62 kg

Gear motor, electric motor -Speed: 78 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 -electric coupling -Dimensions: 395/190/H180 mm -Weight: 14 kg

Gear motor, electric motor -Speed: 194 rpm -Power: 0.75 kW -Construction: B3 -Diameter hollow shaft: Ø 24 mm -Protection class: IP 55 -Number: 1x motors available -Price: per piece -Dimensions: 430/150/H200 mm -Weight: 15 kg

Three-phase motor, electric motor -Power: 9.2 kW -Speed: 2900 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 55 -Price: per piece -Number: 1x available -Dimensions: 490/260/H310 mm -Weight: 52 kg

Three-phase motor, electric motor -Power: 9.2 kW -Speed: 2920 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 560/330/H270 mm -Weight: 80 kg

Refer to code 1021 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

MF-25 Corner Forming Machine

Refer to code 1022 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Magnetizing device Magnet physics MF-RI8 Item condition: New without OVP The goods originate from a plant closure in the automotive industry and were temporarily stored in paternosters. Storage traces possible. R12B1_EK More products of this category can be found in our extensive EBAY assortment. More magnetizers - new and used - can be found in our shop! International shipping costs on request!

Refer to code 1023 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.