m 520 used for sale

PVS 125 H Micro-cut Drive 15 KW 400 Volt 50 Hz Horizontal design with trrichter Funnel volume approx. 120 liters

Magnetic drill, hand drill -Magnetic base: Magnetor type PS 32 L -Drilling machine: AEG type HBE-IV - Recording: MK2 -Max. Drill: Ø 23 mm -Connection: 265V/200Hz -Dimensions: 700/300/H670 mm -Weight: 49 kg

workpiece length ... 3050mm max. šWorkpiece width ... 1525mm sheet thickness ... 19mm Laser power... 2500W Axis Z ... 300mm Axis A ... 360° Axis B ... 1.5M Axis C ... 360° Control Mazatrol L x W x H ... 9800x5000x2300mm Machine weight ... 14500kg The machine is in good condition, possible to test under power.

Maize leveling blade, silo leveling blade, maize leveling blade -The shield is rounded for better material flow -Working width: 3000 mm -Sign height: 1250 mm -Wall thickness: 18 mm -Delivery time about 2 weeks -Weight can be made according to customer requirements -Weight: approx. 1000 kg

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Max. welding power: 350 A -Accessories: Welding cable with electrode clamp, ground cable -Quantity: 1 welding machine available -Price: per piece -Dimensions: 390/550/H530 mm -Weight: 56 kg

Siemens Multix TOP ACSS with the following system components: Generator Polydoros IT 55 Tube Opti 150/40/80 HC 0.6/1.0_Bj. 2013 (ceiling hanging) Vertical tripod Vertix TOP • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the man ...

Morse taper sleeve, tool holder, morse taper, morse cone, taper sleeve, adapter -Morse taper sleeve: Morse taper extension -Intake: MK4/MK4 -Number: 2x sleeve available -Price per piece -Dimensions: Ø 48/260 mm / Ø 47/265 mm -Weight: 1.8 kg/pc.

Multigraf MCM-48 creasing and perforating machine Specifications MCM-48: Manual of the material feed Minimum format, mm 80x100 Maximum format, mm 480x500 Material density, g/m2 80-500 Dimensions, mm: 1100 x 605 x 300 Power supply: 220 V

Reed 40” x 16” Two Roll Mill Hand operated nips Right angle drive Tray fitted beneath Mill Rolls

Qty. 1 Second-hand 4-Hi Non-Reversing Rolling Mill – still in operation! Mfc.: Lheung-Maschinery, Yushin Heavy Electric, Mitsubishi Built: Not specified! Rebuilt: 2017.08 Material: Aluminum & Aluminum Alloy Line speed: 80 m/min. Strip width: 550 mm Thickness: 0.3 – 6.3 mm Coil size: ID 508 mm OD 1500 mm Weight:

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Double grinding machine: Type ES200 PW -Grinding discs: max. Ø 230 mm -Motor: Power 0.55 kW -Speed: 2800 rpm -Voltage: 380 V -Dimensions: 510/320/H1230 mm -Weight: 54 kg

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 1435 rpm -Shaft: Ø 22 x 50 mm -Design: B5 -Protection class: IP 44 -Dimensions: 365/290/H250 mm -Weight: 37 kg

Main features : -Model: PM; -Floor model; -AISI 18/10 stainless steel construction; -With transmission system in operation (gear transmission); -2 separate motors; -Automatic feeding with 90 l. bunker; -Stirring paddles with automatic reverse; -"Unger" system - 5 instruments; Technical data : -Dimensions L / W / H: 770 / 1145 / 1325 mm.; Productivity: 1050 kg./hour; Grinding motor power: 4 kW; Stirring motor power – 0.75kW; Neck: 98 mm.; Weight: 400 kg.; The price includes a complete set of grinding tools - 2 knives, kidney, grid 3mm., 4mm., 6mm., 7.8mm., 10mm;

Gear motor, electric motor -Speed: 53 rpm -Power: 0.18 kW -Construction: B5 angle -Hollow shaft: Ø 20/65 mm -Dimensions: 330/145/H175 mm -Weight: 10.2 kg

CNC portal flame cutting machine Manufacturer: MGM Type: Cortina DS3100 Retrofit 2022 CNC control: MS300 Track width: 3,100 mm 1 oxy-fuel burner gas type as desired Track length: 5 or 6 m without table

Three-phase motor, electric motor -Drive motor of: a cylindrical grinding machine VEB SIP315x500 -Power: 1.5 kW -Speed: 935 rpm -Drive shaft: 28 x 60 mm -Design: B5 -Protection class: IP 44 -Dimensions: 360/250/H250 mm -Weight: 27 kg

Semi automatic skewer machine- Miveg Wrap system 600 new machine 1 year warranty

3-spindle deep hole drill -without electrics- Year of construction 1998 / rebuilding 2014

Pressure medium converter, pressure intensifier, pneumatic-hydraulic intensifier -Max. Hydraulic pressure: 120 bar -Dimensions: 208/170/H350 mm -Weight: 7.4 kg

Size 400 x 550 mm Height 160 mm Details Semitautomatic with timers Speed 40 cycles per minute Shrinking tunnel Beck shrinking tunnel

Available EMCII to SD machines - P76 - -> sold - P92 - P115 --> sold

MIG/MAG hose package -Length: 3.5 m -Plug -Gas cooled -Weight: 2.8 kg

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, slide valve, directional valve -Magnetic valve -Type: 10897 MFH-5/3E-1/4-D-1 -Working pressure: 3.5-10 bar -Number: 8x valves available -Price: per piece -Dimensions: 165/90/H40 mm -Weight: 0.6 kg/piece

Netstal E-Jet for sale. Machine is functional. Year of construction 2004 Spray force 113 kN Clamping force 500 kN Opening distance 50 mm Tool installation height 195mm-515mm Degree of protection 54 IP Machine weight 4400 kG Detailed information and condition of the machine > see attached pictures If you have any further questions, please do not hesitate to contact us.

Grinding range: approx. 130 x 255 mm Grinding speed: 2800 rpm Table size: 150 x 300 mm Drive motor: 380 V, 1.5 kW Space requirement: 750 x 700 x 1700 mm Weight: approx. 380 kg Pot disc Ø: 180 mm

Machine Details Warehouse number 1105-03676 Machine type CNC lathe Make MAZAK Type SQT 200 Year of construction 1998 Control type CNC Control Mazatrol fusion 640T Storage location FRANCE Country of origin Japan Delivery time ON REQUEST Freight base EX WORK Price Technical details Turning diameter 350 mm Turning length 514 mm Control Mazatrol fusion 640T Circulation diameter 530 mm Spindle nose A2-6, 62mm Spindle bore 51 mm Speed 35-5,000 rpm Turret head (x-fold) 12-fold x-travel 166 mm z-travel 530 mm Total power requirement 18.5 kW Machine weight approx. 5.65 t Information 2-axle, WITH tailstock, WITH SPAENEFOERDER WITH MAZAROL T PLUS

MHME twin lane decorer / florette machine - used for broccoli In good working condition

Control OKUMA ... OSP P300M Clamping table surface ... 400mm Axis X ... 762 mm Axis Y ... 460mm Axis Z ... 460mm Spindle speed... 1000-15000 rpm. controlled axes ... 5 cooling... 20bar SK40 Main engine power ... 22/18.5kW Magazine slots ... 48 The machine is in good condition, possible to test under power.

High pressure air compressor Belliss and Morcom High pressure air compressor Belliss and Morcom type: VH9H3N serial no. R188660 year of manufacturing: 2005 maximum working pressure: 40bar capacity: 580 m³ / h incl. pressure tank incl. cooling system / chiller

Machine Details Warehouse number 1105-03678 Machine type machining center - Universal Make DECKEL MAHO DMG Type DMU 50 5-axis 3+2 Year of construction 2005 Control type CNC Control HEIDENHAIN ITNC 530 530 Storage location FRANCE Country of origin Germany Delivery time immediately Freight base EX WORK Price Technical details x-travel 500 mm y-travel 420 mm z-travel 380 mm Control HEIDENHAIN ITNC 530 530 Recording SK 40 Speed 10000 1/min Table top 500 X 380 MM mm Information HEINDENHAIN ITNC 530 Controlled NC round swivel table, 2 axes coolant device, Full cabin, 10000 RPM MAGaZIN 30 TRAY SK 40 LINEAR MASSTAEBE PARTS MEASURING SYSTEMS HEIDENHAIN SPAENEFOEDERER

Gear motor, electric motor, electric gear motor -Speed: 3.7 rpm -Power: 0.55 kW -Diameter shaft: Ø 32 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 760/220/H250 mm -Weight: 42 kg

Machine type MIG/MAG welding system MerkLE brand Type M 210 K Connection voltage 230/400 volts Setting range 25 – 210 amps Duty cycle 15 % ED at 210 Ampere 60% ED at 80 amps Current adjustment infinitely variable Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive DV 25 Fuse 16 amps Dimensions L x W x H 855 x 390 x 585 mm Weight 75 kg Special accessories point and interval device Adapter for 230/400 V Age approx. 25 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 157 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 piece hand shield 1 piece attachment glass 90 x 110 mm white  ...

Year: ca. 2001 Serial No. R11/47, Roundpile Feeder with Overhead Digital Panet, HSS Gluing System, 1st Station: 4 Pockets, 2nd Station: 4 Pockets, 3rd Station: 2 Pockets, MBO X Mobile Knife for 32 Pages, Pressing Delivery

Two-station machine for articles up to 5 ltr. Extruder 90/24D, quadruple head 4 x 45 mm center to center. Clamping force 83 kN. 460V 60 Hz Good condition

Single-station machine for articles up to 5 ltr. Extruder 80/24D, double head 160 mm center to center. Trim cutting in the machine. 460V 60 Hz Good condition

Machine type MIG/MAG welding system Eurotronic brand Type MAG 3000 EC Connection voltage 3 x 400 Volt Setting range 30 – 300 amps Duty cycle 35 % ED at 300 Ampere 60% ED at 230 amps 100% ED at 190 amps Current setting 12 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 4-roller drive Fuse 16 amps Dimensions L x W x H 860 x 490 x 650 mm Weight 78 kg Age approx. 5 years Condition workshop tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, kpl. Equipped 1 pair of welding gloves 1 piece instruction manual  ...

live point, live center, live morse taper, live -Manufacturer: Röhm, live center type 110 H -Barrel tip: shaft-bearing -Intake: MK5 -Number: 2x center point available -Price per piece -Dimensions: Ø 92/255 mm -Weight: 4.7 kg/pc.

Fan, fan, electric motor blower -Fan electric motor: 2000 W -Speed: 2850 rpm -Voltage: 380 V -Protection class: IP 54 -Price: per piece -Number: 4 pieces -Dimensions: Ø 160/325 mm -Weight: 17.2 kg

Three-phase motor, electric motor -Power: 2.2 kW -Voltage: 220/380 V -Speed: 915 rpm -Shaft: Ø 34/28 mm -Length shaft: 120/60 mm -Construction: B3 -Protection class: IP 55 -Dimensions: 495/240/H275 mm -Weight: 28 kg

Machine type TIG inverter welding system gas-cooled DC and AC system Merkle brand Type LiteTIG 190 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 190 amps Duty cycle 25 % ED at 190 Ampere 60% ED at 140 amps 100% ED at 115 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 150 x 240 mm Weight 7.4 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 24 months warranty 1 piece instruction manual List factory price ex ...

Metal band saw blade, band saw blade -unused original packaging -Number: 7x sheets available -Price: per piece -Toothing: 4/6 K-POS -Dimensions: 2835/27/H0.9 mm -Weight: 0.6 kg/piece

Metal band saw blade, band saw blade, metal saw band -Condition: unused -Price: per piece -Number: 3x sheets available -Toothing: 8-12 ZpZ -Dimensions: 2950 x 27 x 0.90 mm -Weight: 0.9 kg/piece

Metal band saw blade, band saw blade, metal saw band -Condition: unused -Price: per piece -Number: 5x sheets available -Toothing: 5-8 -Dimensions: 4500 x 34 x 1.10 mm -Weight: 1.3 kg/piece

Electric motor, three-phase motor with 2 speeds -Power: 1.6/2.2/6.6 kW -Speeds: 730/980/1460 rpm -Shaft: Ø 42 x 110 mm -Construction: B3 -Protection class: IP 54 -pole changing -Dimensions: 595/385/H310 mm -Weight: 105 kg

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor -comes from: a Still forklift -Drive: 24 V 2 kW -Dimensions: 370/500/H350 mm -Weight: 82 kg

Siemens Multix TOP with the following system components: Generator Polydoros LX 30/50 Tube Opti 150/30/50 C 0.6/1.0_Baujahr 2019 (ceiling hanging) Vertical tripod Vertix TOP • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the ...

Drill press, drill press, stand drill, pillar drill -Table size: 430 x 615 mm -spindle taper: MK4 -Projection: 365 mm -Speeds: 63-800 rpm -Spindle stroke: 195 mm -Transmission -Feed: 0.1-0.4 mm/rev -Water cooling -Dimensions: 730/1040/H2640 mm -Weight: 1026 kg

Naxos CNC Multi-Axis Cylindrical Grinder Year: 1987/2013 Max. swing: 630mm Max. distance workhead face to tailstock face: 4850mm Max. travel for Z axis: 5000mm Max. grinding distance for main wheel: 4520mm X axis infeed travel for both headstocks: 720mm Approx. weight between centers: 4000kg Power requirements: 460/3/60 This machine was completely remanufactured to new specifications in 2013 and installed in 2014. It was stripped down to the bare casting, table/base/wheel heads/work head and tailstock and the second z axis ways were fit and rescrapped. New electrical cabinet with all new wiring to the machine and new all components, hydraulic lines, air lines and new cable carriers were added. New Marathon 60HP motors for both grinding wheel heads. (The drives in the cabinet are set for 40 Hp) The spindle drives in the cabinet are Yakawa built in the USA along with the workh ...

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -without hose package -Max. Welding power: 250 A. -Air cooled -Incl. Ground cable -Gas valve -Dimensions: 370/720/H870 mm -Weight: 52 kg

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 920 rpm -Shaft: Ø 28 x 60 mm -Design: B5 -Protection class: IP 54 -Dimensions: 385/276/H250 mm -Weight: 32 kg