m 520 used for sale

Multihead weigher - Multipak 24 3x8 plus Memory bucket for mixed product All stainless steel Up to 150 wpm IP65

Frequency converters, frequency converters, drive converters, controllers, inverters -Manufacturer: Siemens, Sinamics Power Module 240 -Input: 3 AC 380-480 V 31.5 A 50/60 Hz -Motor: IEC 7.5/11 kW -Dimensions: 340/190/H290 mm -Weight: 12.7 kg

Siemens Multix FD with the following system components: Generator Polydoros LX 30/50 Lite Tube Opti 150/30/50 HC 0,6/1,0_Baujahr 06/19 Vertical tripod Vertix FD 2x Detector Trixel Pixium 4600 • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation and configuration of the system or the system components must be carried out by a specialist or technician authorized by the manufacturer!

Mixing Grinder 114 mm hole plate diameter Throughput depending on material type, speed, and cutting set Capacity: up to 2.500 kg/h Main motor power: 5 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 80 Length: 130 Height: 145 Hopper capacity approx 150 liters (mixing capacity depending on meat up to 100 kg) Worm, worm housing, and closing are completely stainless Delivery time: after the advanced payment machine is ready for delivery

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Kessler, DC motor -Type: M30/36/2 -Max. Speed: 3045 rpm -Power: 7.5 kW -Voltage: 170/400 V see photo nameplate -Shaft: Ø 28 x 60 mm -Construction: B3 -Dimensions: 585/290/H340 mm -Weight: 115 kg

Tool holder, milling holder, milling tool, collet holder, milling chuck -Manufacturer: Nikken, Multi-Lock Milling Chuck -Type: MCA50F-32HM-SL -Tensioning sleeve: Nikken KM32-16 -Dimensions: Ø 98 x 220 mm -Weight: 4.5 kg

Tool holder, milling holder, milling tool, -Manufacturer: May, milling adapter: SK50 with fine adjustment -Type: FGK3/SK50/N M14-M30 -Dimensions: Ø 98 x 300 mm -Weight: 5.9 kg

Tool holder, milling holder, milling tool, -Milling adapter: SK50 -Type: 50x32x200 M24 -Dimensions: Ø 97 x 140 mm -Weight: 2.7 kg

Tool holder, milling holder, milling tool, adapter -Adaptation: SK50 13 pieces adapter -Tool holder: MK5/MK4/MK3/MK2 -Various types: see photos, more pictures can be sent -Price: complete -Dimensions: 740/500/100 mm -Weight: 54.9 kg

Type: Microcutter Brundeler Holeplate diameter 175 mm Capacity: up to 2500kg/h Hopper capacity: 150 liter Machine dimensions in сm: Length: 170 Width: 80 Height: 105 Power: 37 kW Delivery time: 20 working days after payment

Electric motor, three-phase motor -Manufacturer: MEZ, electric motor type 2AP90S-4 -Power: 1.1 kW -Speed: 1400 rpm -Shaft: Ø 24 x 50 mm -Construction: B14 -Protection class: IP 44 -Dimensions: 300/220/H173 mm -Weight: 13.7 kg

Tool holder, milling holder, milling tool, -Milling mounts: 5 pieces mount MK3 -Sizes: see pictures -Price: complete -Dimension box: 665/125/H30 mm -Weight: 6.1 kg

Electric motor, three-phase motor -Manufacturer: ZSE MEZ, electric motor type 3APJC80-2 -Power: 0.55 kW -Speed: 2890 rpm -Shaft: Ø 19 x 40 mm -Voltage: 220V -Design: B3 -Protection class: IP 44 -Dimensions: 310/165/H195mm -Weight: 12kg

GE mobile X-ray machine VMX • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany and can be picked up immediately. • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation and configuration of the system or the system components must be carried out by a specialist or technician authorized by the manufacturer!

electric motor, three-phase motor -Power: 0.18 kW -Electric motor: 3000 rpm -Voltage: 220/380 V -Shaft: Ø 14 x 30 mm -Design: B5 -Dimensions: 250/144/H165 mm -Weight: 6.3 kg

electric motor, three-phase motor -Power 0.37 kW -Electric motor: 1500 rpm -Shaft: Ø 19 x 40 mm -Design: B5 -Dimensions: 270/200/H205 mm -Weight: 9 kg

Movable bearing, for engine 28/32 Part number: 1614971-6

1 MENSCHNER doubling / folding and measuring machine type RW 24/59 D, year 2001, folds article up to 300 cm in half it's width, with meter counter, with automatic selvedge control and overlaying device, entry with contact A-frame unwinder, mall roll or folded article, exit in roll of folded article, machine's motors are fully inverter controlled, with SIEMENS PLC type S7

Resistance module, switchgear, switching components -Type: ME2676S -Dimensions: 95/50/H75 mm -Weight: 0.15kg

1 THIES high temperature sample dyeing machine type Mini-Soft 140/1, capacity up to 20 Kg year 1991 SEDO PC150V = THIES T5 controller, addition vessel, circulation and injection pump, equipped with filter, winch speed is inverter controlled, with loading and unloading winch

Electric motor, three-phase motor -Power: 2.2 KW -Speed: 1425 rpm -Shaft: Ø 28 x 60 mm -Construction: B5 -Protection class: IP44 -Dimensions: 360/250/H270 mm -Weight: 29 kg

Machine Details Warehouse number 1105-03636 Machine Type Machining Center - Vertical Make DECKEL MAHO Type DMC 63 V Year of construction 2000 Control type CNC Control heidenhain tnc 426 Storage location FRANCE Country of origin Germany Delivery time IMMEDIATELY Freight base EX WORK Technical details x-travel 630 mm y-travel 500 mm z-travel 500 mm Table size 800 x 500 mm Spindle holder ISO SK 40 Speed range 0 - 8,000 1/min Feeds - longitudinal/transverse/vertical 1 - 30000 mm/min Rapid traverses - longitudinal/transverse/vertical 30 m/min Number of tool magazine slots 24 Tool diameter with full assembly 80 mm Tool diameter with 2 free spaces 140 mm Tool length max. 300 mm Tool weight max. 7 kg Table load 500 kg Spindle motor 9 / 11 kW Control heidenhain tnc 426 Total power requirement 30 kVA Machine weight approx. 4.5 t Information heidenhain tnc 426 El. ...

Miwe Condo CO 4.0806 2D Stone Slabs Oven Electric -Shared oven with 4 floors and proofing cabinet -Manufacturer : Miwe -Model: Condo CO 4.0806 2D -with 4 floors each 80x60cm -with Miwe FP8 control -Floor entrance height 13cm -with proofing cabinet -with exhaust air hood and vapour condenser -Year of construction 2012 -18.9 kW -400 Volt 50Hz Outer dimensions approx.: 110x 115cm and 210cm high

Control cabinet, distribution cabinet, control cabinet, TS modular cabinet -Mounting plate for: control cabinet -Dimensions: 1895/500/22 mm -Weight: 28 kg

Roof window roller shutters, blinds, roller shutter curtains, roller shutter motors, tubular motors -Tubular engine: Somfy -Motor: 20/17 LT50 20 Nm -Dimensions: 570/60/H60 mm -Net weight: 2.3 kg

Jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, -Table dimensions: 700 x 405 mm -Travel: Z 330 mm/Y 410 mm/X 630 mm -Quill stroke: 155 mm -Recording: MK4 -Speeds: 31 - 1500 rpm -Dimensions: 1570/1800/H2600 mm -Weight: 2600 kg

MOSCOW 582 thread grinding machine was manufactured in the USSR. Technical data of MOSCOW 582 thread grinding machine - grinding diameter: 250 mm - grinding length: 500 mm - tooling (divider, fang, changewheels) - dimensions: 260 x 220 cm

grissine machine

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 100 V - 500 V -Installation dimensions: LxWxD approx. 140x140x80 mm -Dimensions: 144/144/H80 mm -Weight: 0.7 kg

Specifications: Drill diameter: 3 - 32 mm Center angle: 90° - 140° Speed grinding wheel: 4800 1/min Connection: 230 V Motor power: 0.25 kW Weight, approx.: 32 kg Dimensions LxWxH, approx.: 360 x 250 x 310 mm Characteristics: - Ideal for grinding HSS/carbide twist drills - Easy to use - Safe operation due to forced grinding process - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including spout alignment for flawless centering of the drill on the workpiece and to reduce the feed force during drilling - Device for back grinding the drill edges to reduce friction between drill and workpiece - Rotor with precision ball bearing - Vibration-free running due to high dead weight - CE Scope of delivery: - Grinding wheel CBN - 30 ER collets ER 40, 13 - 32 mm (suitable for intermediate sizes) - ...

Specifications: Drill diameter: 3 - 20 mm Center angle: 90° - 140° Speed: 4800 1/min Connection: 230 V Motor power: 0.12kW Weight, approx.: 8.6 kg Dimensions, approx.: 290 x 150 x 180 cm Characteristics: - Ideal for grinding HSS/carbide twist drills - Safe operation due to forced grinding process - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including propping alignment to reduce feed force - Device for back grinding the drill edges to reduce friction between drill and workpiece - Rotor with precision ball bearing - CE Scope of delivery: - Grinding wheel CBN - 11 collets ER 20, 3 - 13 mm - 7 collets ER 24, 4 - 20 mm - Collet holder ER 20, ER 25

Module converter, Lightbus combined input/output module -Type: M2400.041 -digital inputs: 8 -digital outputs: 8 -Quantity: 1 available Price: per piece -Dimensions: 270/75/H70 mm -Weight: 1.2 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 46.9 rpm -Power: 0.55 kW -Construction: B3 -Shaft: Ø 30 x 60 mm -Protection class: IP54 -Dimensions: 475/210/H195 mm -Weight: 29 kg

Machine Details Warehouse number 1105-03650 Machine Type Machining Center - Vertical Mori SEIKI brand Type MV 40 E Year of construction 2001 Control type CNC Control msc 500 (FANUC 16M) Storage location FRANCE Country of origin Japan Delivery time immediately Freight base EX WORK Technical details x-travel 560 mm y-travel 410 mm z-travel 460 mm Control msc 500 (FANUC 16M) Rapid traverses x/y/z 20/20/15 m/min Table area 900 x 450 mm Tool magazine: 30 BT 40 tool diameter 80 mm tool length 250 mm tool weight 8 kg Spindle speed 8000 1/min Spindle motor 7.5 kW Total power requirement 30 kW Machine weight approx. 5 t Space requirement approx. 2.48 x 2.25 x 2.8 m Information FANUC 16 M 2 SPAENEFOERDERER

Pressure measuring device, flow measuring device, measuring and control technology, measuring device -imc: universal measuring device µ-MUSYCS -Voltage: 110 - 230 V AC/DC -Dimensions: 330/345/H145 mm -Weight: 6.4 kg

Specifications: Uniform spindle spacing: 32 mm Number of spindles: 23 Distance between the first and last spindle on the drill head: 672 mm drilling depth: 80 mm Table size: approx. 900 x 545 mm size of the workpiece: 800 x 2500 x 100 Working pressure: 0.6 MPa Air consumption: 10 NL/cycle Voltage, frequency: 400 V/50 Hz Spindle speed / min.l: 2800 rpm. Motor power: 1.5 kW Weight ca: 400 kg Dimensions: 1220 x 1065 x 1400 mm Patented spiral system Programming and adjustment devices of horizontal and vertical Drilling depth. Pneumatic drill head shears Drill head frame of 0-90 degrees with blocking in any position and reference switching angle with each angle Head with quick-connect spindles (the quick-release buckets are a Zubehoer). 5 quick-release buckets are standard. 2 patented pneumatic pressure devices accident-protected. 2 side connectors on the table ...

Duebel hole drilling machine BORING SYSTEM 21 PRESTIGE QUICK CONNECTIONS 21 DRILLING SPINDLES AXLE DISTANCE 32 MM CENTER DISTANCE FROM THE FIRST TO THE LAST DRILL CHUCK 640 mm DRILLING DEPTH 65 mm Engine power 2 hp Aluminium stop with 2 folding straps equipped with 1 left stop 1500 mm and 1 right stop 1500 mm 5 drilling spindle droplets 2 Pneumatic hold-downs in a safe and secure manner incl. packaging Quick Connection Drilling Spindles Drill head in cast iron Cast iron work table Drilling depth adjustment via patented spiral system Pneumatic scraping of the drilling group from 00 to 90 ° adjustable in any position. Stop infinitely adjustable via millimeter scale with magnifying glass High drills over num. digital display adjustable Back-side stop max. travel 300 mm Fixed stop on 37 mm for doorband Machine built according to Ce standards

Tool holder, milling holder, milling tool, boring head, spindle tool, reducing sleeves, clip-on holder -Milling mount: mount MK4 -Measures: see pictures -Dimension: Ø 56 x 670 mm -Weight: 7.5 kg

Tool holder, milling holder, milling tool, boring head, spindle tool, reducing sleeves, mounting bracket -Milling tool holders: 10 pieces MK5 mounting boring heads/reducing sleeves/spindle tools/mounting holders -Sizes: see pictures -Price/Sale: complete -Overall dimensions: 670/470/H80 mm -Total weight: 41.7 kg

Multipak 10 STD 10 linear vibrators with vibration control 10 feeding buckets 10 weigh buckets 20 stepper motors for opening buckets All made of stainless steel (INOX) Up to 70 weighs per minute Central vibrator with automatic vibration control

Tapping chucks, tapping chucks, tapping chucks -Tapping chuck: with return -with: slip clutch -Cutting capacity: M8-M18 -Recording: MK3 -Quantity: 1x thread cutting chuck available -Price per piece -Weight: 3.4kg

Packaging machine - Flowpack Multi 30 horizontal packer Film width: 300mm Passage height: 40mm Packing speed: up to 120 pcs / min

Description Domino M230i T4 The ability to use stroke lengths of 0 – 360 mm and the auto-stop function to interrupt movement when touching an obstacle make the M230i-T4 label dispenser the most versatile and safe labeling system available on the market today. It is immediately available and ready for use Viewing possible at any time If it does not fit, there is always a large number of different labelers in stock. Talk to us and we will find the right one for you.

Gear motor, electric motor, electric gear motor -Motor: VEM type KR 63,1/2 S -Power: 0.18 kW -Voltage: 220/380 volts -Construction: B5 angle -Shaft: Ø 22 mm with driver slot -Protection class: IP44 -Dimensions: 300/170/H180 mm -Weight: 8.4 kg

Profibus single module, Profibus single module, for PLC control, fieldbus, PROFIBUS, input module -Festo type: CP-A08-M12 18207 LN07 -Connection: 24V DC -Dimensions: 173/75/H60 mm -Weight: 0.5 kg

- workpiece diameter d680 - max workpiece length 3400 mm - max working lengths 2600 mm - with discs (d1100 mm) - required electric capacity 60 kW/h - under power, in use

(Serial No. M12/42), Flatpile Feeder, Overhead Control Panel, 4 Pockets, 1 Cross Fold Knife, Delivery

Three-phase motor, electric motor -Mitsubishi: Super Line type SF-J -Power: 2.2 kW -Speed: 1430/1720 rpm -Shaft: Ø 28 x 55 mm -Construction: B3 -Dimensions: 360/270/H205 mm -Weight: 30 kg

PVS 125 H Micro-cut Drive 15 KW 400 Volt 50 Hz Horizontal design with trrichter Funnel volume approx. 120 liters

MIG/MAG hose package for robots -Hose package with: wire feed for robots or automatic welding machines -Length: 3.4 m -Water cooled -Weight: 5.5 kg