m 520 used for sale

Measuring device for muA -30 m to 750 m -approx. 1000 ohms to 5000 ohms -Dimensions: 200/90/H265 mm -Weight: 3 kg

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: MDrive 23, Stepping Motor stepper motor -Type MDM1PSD23C7 -Shaft: Ø 6 x 18 mm -Quantity: 2x stepper motor available -Price per piece -Dimensions: 120/58/H75 mm -Weight: 1.2 kg/pc.

Control module, compact control, fan coil control, electronic module -Manufacturer: Meitav-tec, Universal Fan Coil Control -Type: MIGA1-FC-SUPER -Operating voltage: 230 volts -Dimensions cardboard: 170/90/H45 mm -Weight: 0.5 kg

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards -Manufacturer: Krauss Maffei, MC3 control plug-in cards circuit boards from injection molding machine -Temperature controller card: Gossen Pantatherm DS 4 3 pieces -DC-DC converter: Elba euro module PCD 54 CP on plug-in board: Krauss Maffei AN 100 -Prop.amplifier: Bosch 0 811 405 015 / 0 811 405 002 / 0 811 405 099 - Plug-in card: Krauss Maffei SK201 -Individual components: see photos -Price/sale: complete -Dimensions: 480/215/H270 mm -Weight: 4.8kg

Tool holder, milling holder, milling tool, -Manufacturer: May, milling adapter: SK50 with fine adjustment -Type: FGK3/SK50/N M14-M30 -Dimensions: Ø 98 x 300 mm -Weight: 5.9 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, temperature measuring device, control panel -Display range: 0 °C - 150 °C -Installation dimensions: LxWxD approx. 66x138x192 mm -6 V -Number: 2x available -Price: per piece -Dimensions: 72/144/H192 mm -Weight: 1 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -for sawing: edges on the front and rear edges of the workpiece -1x: Motor Perske -Type: KN60.09/2 -Power: 1.5 kW -Voltage: 220/380 volts -Frequency: 50 Hz -Speed: 2810 rpm -Dimensions: 900/575/H450 mm -Weight: 112 kg

Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Cutting jaws: 1/4 - 2 -Dimensions: 510/360/H240 mm -Weight: 64 kg

Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Cutting jaws: 1/2 , 3/4, 1 , 1 1/4, 1 1/2 -Dimensions: 510/360 / H240 mm -Weight: 64 kg

Tool holder, milling holder, milling tool -Number: 2x SK50 holders -Adapter -Adjustment: SK50 -1x tool holder: MK3 -1x tool holder: Ø 20 mm and with CNC pull studs -suitable for: tool changer -Sale: only complete -Weight: 6 kg

Gear motor electric motor -Speed: 137 rpm -Power: 0.25 kW -Coupling: 24 V -Construction: hollow shaft angle B5 -Diameter hollow shaft: Ø 22 mm -Protection class: IP 54 -Dimensions: 440/160/H180 mm -Weight: 14 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.37 kW -Speed range with angular gear: 60-308 rpm -Motor: adjustable -Diameter hollow shaft: Ø 19 mm -Construction: B5 angle -Number: 1 piece of motors available -Price: per piece -Dimensions: 440/170/H180 mm -Weight: 13 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.37 kW -Speed range with angular gear: 19-140 rpm -Motor: adjustable -Diameter hollow shaft: Ø 22 mm -Construction: B5 angle -Number: 1 piece of motors available -Price: per piece -Dimensions: 480/170/H220 mm -Weight: 17 kg

Gear motor, electric motor -Speed: 57/114 rpm -Power: 1.1/1.8 kW -Construction: B5 angle -Diameter hollow shaft: Ø 28 mm -Protection class: IP 54 -Brake -Dimensions: 570/250/H250 mm -Weight: 37 kg

Gear motor, electric motor -Speed: 23 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter hollow shaft: Ø 25 mm -Protection class: IP 54 -Brake -Dimensions: 500/150/H280 mm -Weight: 20 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer gearbox Ercole Marcelli type: MA80b4B14 -Manufacturer Motor Motovario Type: TKR/10 -Motor power: 0.75 kW -Speed range: 40-200 rpm -Motor: adjustable -Height of shaft axis: 163 mm -Drive shaft: Ø 28 mm -Number: 1 piece of motors available -Price: per piece -Dimensions: 530/240/H260 mm -Weight: 35 kg

Gear motor, electric motor, electric gear motor -Speed: 5 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter hollow shaft: 25 mm -Protection class: IP 55 -Number: 1x motors available -Price: per piece -Dimensions: 570/160/H215 mm -Weight: 18.2 kg

Three-phase motor, electric motor -Power: 9.2 kW -Speed: 2900 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 55 -Price: per piece -Number: 1x available -Dimensions: 490/260/H310 mm -Weight: 52 kg

Key data: 750 mm, 500 mm, 550 mm

CNC machining center MAS MCV 750 Vertical Machining Center MAS MCV 750 Manufacturer: KOVOSVIT MAS Model: 750 Year of construction: 2003 Weight 4,000 kg HEIDENHAIN TNC 530 Control Tool change 20 positions X/Y/Z - 750/500/550 mm Max. table area: 1000 x 500 mm Max. table load: 400 kg Max. spindle speed: 10,000 min-1 Accessories: Cooling Central Cooling Conveyor Preserved machine!

Type: SW 452 2 movable circular saws manual angle adjustment 90° gt; 45° Dia saw / abrasive - disk : 450 mm Length : 8000 mm Depth : 1800 mm Height: 2000 mm Weight: 1,5 ton

Heidenhain TNC 124 Year of construction 1996 Spindle holder ISO 40 Travel 310 x 170 x 340 mm 16 spindle speeds from 40 - 2500 rpm Infinitely variable feeds Weight approx. 700 kg

machine has been completely refurbished EMC2 electronic computer cutting programmes Monitor display 6-channel light guards two hand safety cutting back table guarding optical cutting line indication air table slot cover at back table side tables (2) 2 knives, documention, el. diagrams

Control Heidenhain ... TNC 530 Clamping table surface ... 1300 x 600mm Axis X ... 1016mm Axis Y ... 610mm Axis Z ... 710mm Spindle speed ... 0-10000/min. controlled axes ... 3 cooling ... 20bar ISO 40 Magazine slots ... 24 Machine weight ... 5500kg The machine is in good condition, possible to test under electricity.

CNC lathe MULTIPLEX 6200-II Manufacturer: Mazak Year: 2015 Control Mazatrol ... MATRIX 2 Turning diameter ... 320mm Rotation length... 180mm Counter spindle Spindle bore ... 51mm Machine weight... 7900kg L x W x H ... 3570x1795x2090mm Circumferential diameter above bed ... 320mm Spindle speed ... 1-5000rpm The machine is in good condition, possible to test under electricity.

Type MX5116T+ V-380 Work table dimensions 1100x700 mm Sliding table 1085х250 mm Diameter of spindle 35 mm Spindle rotation speed 6000-8000-8000-10000 rpm Max. working thickness 120 mm Motor power 4 kW Dust exhaust outlets Ø90, 200x80 mm Number of wheels(pcs)-3 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Transport dimensions 1650x700x1600mm Weight 466 kg Price 3060 Eur (EXW Jonava, Lithuania)

Type MX5116T+ V-480 Work table dimensions 1100x700 mm Sliding table 1085x250 mm Diameter of spindle 35 mm Spindle rotation speed 6000-8000-8000-10000 rpm Max. working thickness 120 mm Motor power 4 kW Dust exhaust outlets Ø90, 200x80 mm Number of wheels(pcs)-4 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Transport dimensions 1650x700x1600mm Weight 469 kg Price 3190 Eur (EXW Jonava, Lithuania)

Type MX5117B+V-380 Work table dimensions 1130x670 mm Spindle speed diameter 35 mm Spindle rotation speed 6000-8000-800-10000 rpm Max. working thickness 120 mm Motor power 4 kW Dust exhaust outlets 200x65, 200x80 mm Number of wheels(pcs)-3 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Transport dimensions 1650x700x1600mm Weight 391 kg Price 2360 Eur (EXW Jonava, Lithuania)

Type MX5117B+V-480 Work table dimensions 1130x670 mm Spindle speed diameter 35 mm Spindle rotation speed 6000-8000-800-10000 rpm Max. working thickness 120 mm Motor power 4 kW Dust exhaust outlets 200x65, 200x80 mm Number of wheels(pcs)-4 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Transport dimensions 1650x700x1600mm Weight 394 kg Price 2490 Eur (EXW Jonava, Lithuania)

MADO MEW 725 automatic grinder, including lifting device, two feeding worms, one working worm, cutting set Unger 5 pcs., including key for the removal of the working worm

5000 hours of program operation, in excellent condition, without breakdowns, Regular maintenance inspection is possible

DMG Mori Milltap 700 Vertical Machining Center 700x420x380 10.000 rpm Siemens 840d Sl kontrol unit Preperation of 4th axis

It is equipped with a MicroStep control unit. MicroMill machines are designed for 3D CNC milling of mild metals, plastics and wood by means of high-revolution spindles. Machine weight: 800 kg CNC: MicroStep

3 axis water jet machine 4000 Bar 3000 mm x 2000 mm All accessories will come with machine Level Pressure 4200 bar Maximum Operating Pressure 4000 bar High Pressure Flow Rate 2.3 Liter Electric Motor 37 KW Heat Exchanger Motor 0,37 KW Motor Speed 1500 rpm 50 Hz Safety Shutdown Circuits High oil temperature low oil level Low air pressure Low pressure pressure (water) Low pump pressure Electronic adjustment in the pressure range of 100 bar and 4000 bar Hydraulic Pump 71Cu Cm / 103Lt) Hydraulic Axial Piston Max Working Pressure 200 bar Cooling Water Flow Rate 30 Lt / min The most favorable inlet pressure 4 bar (water) Booster Pump Setting 12 bar (water) Physical Dimensions Height = 122 cm Width = 104 cm Length = 1813 cm Single Head Orfis Diameter 0.14, 0.18, 0.23, 0.25, 0.28 Pump Warranty Period (Hydraulic electronics) 2 years or 1000 hours

Mavijet MJT-5000 Waterjet Cutting Machine Maximum working pressure : 5000 BAR Machine is like new condition Working hour : 1529(May 2023) Working table : 4000 mm x 2000 mm Double head

Installed in August 2014 Regularly maintained Usually very small pieces are cut https://www.mitsubishi-edm.de/en/mvs-series-specifications.html

Manufacturer Mitsubishi Model MV1200S Year 2014 Imported to Germany in October 2022 Fully maintained

Machine description - screw diameter: 40 mm - screw L / D: 22: 1 - injection weight (HDPE): 190 g - maximum speed of the screw: 10-225 rpm. - heating power: 8.3 kW - injection clamping force: 292 kN - blow clamping force: 46.7 kN - maximum plate size (L x W): 400 × 270 mm - minimum mold thickness (H): 180 mm - mold heating capacity: 3 kW - opening: 220 mm - drying cycle: 3.5 sec. - engine power: 15 kW - hydraulic pressure: 15 MPa - suitable bottle range: 3-800 ml - maximum bottle height: ≤190 mm - maximum bottle diameter: ≤100 mm - minimum air pressure: 1MPa - compressed air discharge rate: ≥0.7 M3 / mm - water flow: 3 M3 / h - total rated power with mold heating: 26.3 kW Year of production 2015 Dimensions 326x120x220 [cm] Weight 4000 [kg]

Horizontal 4 column design full hydraulic clamping system Rubber Injection moulding machine A machine that used very little.very clean .There is no problem in the machine.The machine has a brush Clamping force : 1979 KN Injection volume : 1500-3500 mm Heating plate dimension : 710 x 800

650 Ton L/D: 19 Screw diameter : 90 mm Screw volume(cm3) : 3140 Stroke : 1350 mm Distance between columns : 950 mm x 950 mm DayLight : 1800 mm Plate size : 1400 mm x 1400 mm All maintenance has been done regularly Only original raw material used on the machine Fully hydraulic

1) Powder Mixing Plant Consisting Of: -n°2 Powder Dispensers+clochee For Dust Extraction; -n°1 Horizontal Mixer For Dosing Powders, Complete With Extraction Vents And Dust Filters; -n°2 Horizontal Mixer Accumulation Dust Materials Mixed, Complete With Extraction Vents And Dust Filters; - Support frame plus ladder. -almost new, used for a few hours. 2) Bl Packaging Machine For Plastic Bags 5/30 Kg: - Packaging Machine With Horizontal And Vertical Sealing Bars; - Complete With Electrical Panel And Support Frame. 3) Vertical Bucket Elevator: - Bevini brand; -mod. et4; - Measures 1.15m x 0.55m; - Height 6.70 m; - Almost new, used for a few hours.

Dispenser - pouring machine, semi-automatic, for liquid and semi-liquid products. Data: - capacity up to 300 cycles/h. with a capacity of 180 ml - number of dosing heads 2 - dosing range from 10 ml - dosing tolerance ±1.0% - diameter of packages up to 450 mm - height of packages up to 350 mm - power supply 1 x 240V 50Hz - installed power 0.70 kW. No photos of the connected filler, the device is dismantled in the warehouse, secured.

2 Morat Terrot Mp2 circular machines With stepper motor power supply and Vangi Controller 2 With Recovered Sleeping Kit multiple machines 1 Model MP1 To be revised

3 Terrot Morat MKP2 / 3 jaccard circular machines with stepper motor power supply Vangi2 controller and Terrot Dadalus controller Installed in 1996 Complete with reclaimed hair kit.

Device: Double-cone mixer, Producer: COS.MEC ITALY Type: MB250, Year of production: 2001 Total capacity of the tank: 250L Speed control: 5-13 rpm

Tool changerType of gripperDouble gripper Tool changer planevertical Number of tools90 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTechnical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minGeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Floor space/WeightWeight approx.12400 KgNC swivel rotary table integrated in rigid tableType of Measuring system Direct measuring systemTable surface 800 x 650 (Ø 650) mmRotation Speed 5. Axis 20 rpm5. Axes (swivelling range) +120/-120 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 63 mmNumber of Slots 9Slot wi ...

GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool diameter with occupied adjacent pockets80 mmMax. tool length315 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.12600 KgNC swivel rotary table integrated in rigid tableType of Measuring system Direct measuring systemTable surface 800 x 650 (Ø 650) mmRotation Speed 5. Axis 20 rpm5. Axes (swivelling range) +120/-120 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 63 mmNumber of Slots 9Slot width 1 ...

GeneralUniversal Machining Centre in monoBLOCK construction - MPC Machine Protection Control; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal750 mmCross650 mmVertical560 mmTechnical DataDrive power (100% DC)25 kWDrive power (40% DC)35 kWTorque (100% DC)86 NmTorque (40% DC)130 NmSpeed range- 20000 rpmSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minTool changerType of gripperDouble gripper Tool changer planevertical Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmMiscellaneousClamping SystemHSK-A 63 Floor space/WeightWeight approx.12300 KgNC swivel rotary tableTable surface 800 x 650 (Ø 650) mmCentre bore 50h6 mmMaximum load (table centre) 600 KgSlot width 14 mmDirect mea ...

GeneralHorizontal 5-axis universal machining centre; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal850 mmCross900 mmVertical1150 mmCabineFull protection cabinMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Taper cleaning brushesTaper cleaning unit with rotating brushes for spindle taper HSKNC swivel rotary table DirectDrive CNC swivel rotary table direct drive C-axis with pallet carrier Permissible load: 800 kg / 1,760 lbs C-axis: 80 min-1 direct drive A-axis: 15 min-1 single drive Rotation C axis: endlessly turning Swivel range A axis: +120°/-120° (replacement of base machKi ...

twin screw extruder Manufacturer Mikrosan Model MÇV 67/22D Year 2004