129,044 used machines on RESALE, but how to find them? Machine Search
max. format 78 x 120 cm Year of construction 2012 Fully Automatic Paper Folding Machine Computer control with touch screen Navigator Control Pallet feeder with Vaculift and Vacubelt 4 fold pockets in the parallel fold section Automatic folding pocket adjustment Automatic folding roller adjustment Knife shaft cassette 2 folding swords in the crossfold section Automatic folding blade adjustment 1 more fold pocket after the 1st cross break Palamides alpha 500 Stacking Delivery Delivery date: immediately from stock Price on request. We supply and install worldwide.
MOST MWOS-A5 tank welding machine was built in 2023 in Poland by RYWAL-RHC Sp. z o.o. This highly versatile machine is designed for fully automatic welding of industrial products, i.e. machine parts, pressure vessels and heat exchangers. Circumferential, angle and full-value longitudinal joints are performed by means of two reliable torches in the MIG/MAG method. This solution significantly increases production efficiency, while maintaining the repeatability of the process. All this is complemented by the advanced MCS-X control system with an intuitive interface, which enables the creation of entire production processes in just a few steps. The MOST MWOS-A5v02 circumferential welding machine weighs 3200 kg. Technical specifications of the MOST MWOS-A5 circumferential welding system - working length: 4500 mm - maximum workpiece diameter: 1500 mm - maximum workpiece weight: 5200 kg ...
Key data: 850 kN, 40 mm
R1295Injection moulding machine ARBURG 320-850-210 Multronica Screw D=40mm Locking force 85 t.Converted from floppy disk drive to CL drive Viewing by e-mail appointment is desirable Sale only to traders and under the following conditions The machine is considered to have been taken over when it leaves the company, subsequent complaints cannot be taken into account So no guarantee and return.We do not assume any liability for compliance with all requirements mentioned in the UVV (accident prevention regulations)
Travel path X/Y/Z: 630mm/630mm/560mm, tool holder: HSK-63A, tool positions: 60, pallets: 2, pallet dimensions X/Y: 500mm/500mm, machine dimensions X/Y/Z: approx. 6600mm/6000mm/3200mm, weight: approx. 18000kg, control: Siemens Sinumerik, operating hours: approx. 24152. The machine has a system error - Runtime Error 285, Application oem4421 - and the PLC does not start up. Documentation available. An on-site inspection is possible.
Travel path X/Y/Z: 500mm/380mm/350mm, table dimensions X/Y: 800mm/400mm, spindle taper: SK40, quill stroke: 50mm, speed: 5000rpm, rapid traverse: 4m/min, feed rate: 2m/min. Machine dimensions X/Y/Z: approx. 1800mm/2000mm/2000mm, weight: approx. 2000kg, control: Heidenhain CNC 432. An on-site inspection is possible.
A machining center Chiron, which was completely overhauled in 2013, is available. Travel path X/Y: 6000mm/630mm, rapid traverse: 60m/min, tool positions: 92, tool holder: HSK-A63, speed: 12000rpm, torque: 140Nm, milling axes: 5, weight: approx. 20000kg, control: Siemens S840D, operating hours: 77344h. Includes scraper belt conveyor, OKZ preparation, Knoll VRF 250 vacuum rotary filter, high-pressure pump (70bar), emulsion mist extraction (2x800m³/h), central partition for pendulum machining, hydraulic unit (210bar), and Kohn linear clamping system with 8x hydraulic vices Multi 2000MFS 125/680 HD. Documentation available. An on-site inspection is possible.
Key data: 3 mm, 3000 mm, 130 m/min
One used Ravni starigtening and cutting machine for 3.0 to 8.0mm wire. Cutting length: 3.000mm Machine is equipped with double pay off for 3 t spools and dust abstructor Year: 2014
CURRENCY: MYR If interested, kindly contact Ms. Fatimah (fatimah_asmad@topglove.com.my)
here are 3 new heaters with cable and accessories. Brand-new Special price
Groove/Perforating Machine Petratto Minibat 2; cleaned and tested; Working width 450mm; Format max.700x450mm, min.200x150mm; Creasing distance 0.1mm; Sniffer; Program memory; Incl. Grooving tool; Rental possible. Creasing and perforating machine Petratto Minibat 2; cleaned and checked; workimg width 450mm; size max.700x450mm, min.200x150mm; Creasing distance 0.1mm; vacuum feeder; program memory; incl. creasing tool; can be rent.
Cevenini Log Cutter Model M200 1.5m wide x 200 mm diam. Complete with motor
Twinpack automatic handle applicator model MGE Manufacturing year 2010 Setting handles on shrinked bottles packs Capacity up to 50 packs per minute Siemens S7 machine drive CE control panel Machine in very good condition Recently dismantled and now stored dry and clean in warehouse Available immediately
Marel / Townsend Revoportioner Type: TRP630 Serial number: 10098176 Year of construction: 2012 Belt width: 630 mm Compressed air: 8 - 10 Bar, 200 Nm³/h Water: 2.5 - 3.5 Bar Power: 3 x 400V, 50Hz, 5kW Dimensions: 1850 x 1700 x 1700 mm Weight: 1000 kg Risco vacuum filler Type: RS505CP Serial number: C809047 Year of construction: 2010 Pump capacity: max 8000 kg/h Filling pressure: up to 40 Bar Hopper: 350 litres Power: 3 x 400V, 50Hz, 8kW Dimensions: 2100 x 1200 x 2250 mm Weight: 1010 kg With lifter for 200L tote bins
Process chiller / chiller air-cooled, Type: Aries TECH AST2 115 U MTA S.p.A. The Aries TECH AST2 115 HE are compact chillers suitable for outdoor installation (from -20°C to +48°C) with shell and tube evaporator, four scroll compressors, compressor shut-off valves, crank pan heater, phase monitoring, P3 double pump, tank 598 litres, electric antifreeze heater, condenser filter and control and control cabinet. Cooling capacity (kW): 315 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 53.8 Available. Pump pressure (bar): 2.99 Ambient Temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Refrigeration Circuits (Quantity): 2 Compressors (quantity): 4 Power levels (%): 0-25-50-75-100 Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW): 158 Max. Current (A): 262 Starting Current Circuit (A): 507 P ...
Four fabric inspection machines are available (1) Menzel WOB 1.600mm fabric inspection machine, working width: 1600mm (2) Menzel WOB 3.200mm fabric inspection machine from Hoftex, working width: 3200mm (3) Bauch Maschinenbau CB-WU 380 fabric inspection machine (4) Maag CT 5206-Ah fabric inspection machine. On-site viewing is possible.
Recycling plant/recycling plant General information • Plant type: PET sorting and washing system for the production of PET flakes • Manufacturer: STF-Maschinen & Anlagenbau GmbH • Year of construction: 2023 • New value EUR 4,970,000.00 • Market value (at location): EUR 3,052,000.00 • Installed in two connected halls incl. foundations • Plant currently not in operation (standstill since 11/2024) Technical key data • Max. configuration: 2,000 kg/h • Max. achievable output in continuous operation: 600 kg/h • Output in test run with good material: >1,500 kg/h • Energy requirement: 650-680 kWh (without hot washing system) Stages of the procedure 1. Feeding of PET material (pressed bales) 2. Coarse sorting via sieve drum 3. Magnetic separation of metallic impurities 4. 2-stage sensor sorting (materials) 5. Manual sorting via sorting belt 6. Mill and ...
Width 78 cm Year of manufacture 2001 MC Control Round stack feeder Vacubelt 6 fold pockets in the parallel fold section Motorized fold pocket adjustment Downstream knife shaft Noise Insulation Hood Shed display Delivery date: immediately from stock Price on request. We supply and install worldwide.
x-travel: 1500 mm y-travel: 800 mm z-travel: 600 mm total power requirement: kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: 2,66 x 1,60 x 3,10 m CNC-controlled Coordinate Measuring Machine for fully automatic measuring of workpieces. Incl. Measuring Software MDM Metrosoft Level 2 for measuring of: - Points, surfaces, circles, cylinders, cones, distances and angles. - SPC software for statistic evaluation of the measurements Machine not operational! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Chiron Model: MILL 6000 high speed with NC swivel head Year of Manufacture: 2004 Major overhaul: 2013 Operating hours: 77,374 h Weight: 19,500 kg Power Supply: 3/N/PE ~ 50/60 Hz Working Voltage: 400 V Control Voltage: 220/24 V Power Consumption: 52 kVA Rated Current: 75 A Fuse: 80 A Last spindle replacement: March 2021 (approx. 7,300 spindle hours since) Technical Data: - Control: Siemens 840D (PCU50, NCU572.4) - NC swivel head - Travel paths: X 6,000 mm / Y 630 mm - Rapid feed: X / Y / Z = 60 m/min - Motor spindle: 12,000 rpm, 140 Nm - Tool change time (chip-to-chip): 3.0 sec (vertical), 4.7 sec (horizontal) - Tool magazine: 92 tool positions, HSK-A63 Find more here - / Contact us at -
Offer 25290 Specifications: - Max. working width 3040 mm - max. material thickness at 40 kg / mm² strength 2 mm - Bending angle adjustment selectable 6 - 135 ° - Largest opening width / stroke of the upper beam 250 mm - Height adjustability - bending beam 50 mm - the lower beam 50 mm - Upper bolster drive 400 V / 0.37 kW - Bending beam drive 400 V / 0.75 kW - Manual backgauge - Split goat's foot bending splint - Space requirement approx. W 4000 x H 1400 x D 1200 mm - Weight approx. 3500 kg
GRAEF MASTER 3370 Specifications: 400 Volt / 50 Hz / 2.2 A / 450 W Cutting thickness adjustment: 0 to 24 mm Knife diameter: 330 mm Stainless steel knife, smooth Power current Machine with CERA 3 coating Weight: 43 kg Cutting size square: 300 x 224 mm Cutting size: Ø 190 mm External dimensions (L/W/H): 660 x 620 x 470 mm Installation area (L/W): 585 x 440 mm Carriage dimensions (L/W): 300 x 340 mm Knife speed: 229 rpm Noise level:
Five older thread milling machines Mikron are available, 2x Hydraulic Thread Milling Machine Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 and 1x Short Thread Milling Machine Mikron 106.01, an on-site inspection is possible.
Key data: 4020 mm, 1 mm
with material thickness adjustment, hydraulics on the left side of the machine, without roller shears, bending beam with removable attachment rail approx. 8mm, 3 stop fingers, control on the swivel arm, Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Working length: 4020 mm Sheet thickness max. steel: 1.5 mm Sheet thickness max. aluminium: 2.5 mm Sheet thickness max. VA: 0.8 mm Back gauge (max.): 1000 mm Projection: 1000 mm Colour: blue Total power requirement: 16 A Approx. space required: 6000 x 2000 x 1900 mm Weight approx.: 5000 kg Upper beam stroke (opening width): 200 mm without roller scissors Number of stands: 5 pieces Bending angle (max.): 145 degrees Machine Number: 0040-01
Used Ulbricht ML300VC meat mixer. Capacity 300 liters. Technical data: - Height: 2000 mm, - Width: 1950 mm, - Length: 1100 mm, - Weight: 380 kg, - Capacity: 300 l, - Electrical voltage: 400 V 50 Hz 3N, - Installed power: 3.8 kW, - Stainless steel, - With integrated cooling unit.
Coordinate measuring machine Inv. Num. : 8632 Type: MICRO-MS 343 Producer: Tesa Created: 1997, GO 2020 Parameters: Machine dimensions: 800x750x1370 mm New Reflex system
Spindle speed range: 9000rpm, travel X/Y/Z: 500mm/400mm/400mm, feed rate: 10000mm/min, rapid traverse: 12m/min. Table dimensions X/Y: 700mm/500mm, max. table load: 200kg, number of T-slots: 7, distance between T-slots: 63mm. Control: Heidenhain, tool changer: 16-fold, dimensions X/Y/Z: 4000mm/2200mm/2450mm, weight: approx. 3500kg.
Two DM-323 electrical discharge machines are available. Operating hours machine 1/2: 12,134.51 / 32,704.5 h. Operating manuals and circuit diagrams available. An on-site inspection is possible.
Key data: 500 mm, 450 mm, 400 mm
5 Axis CNC Machining Center Universal CNC Milling Machine DMG Ecoline DMU 50 eco Year of construction: 2011 Siemens Sinumerik Conveyor Complete documentation 5-axis machining of simple to highly complex workpieces. Swivel rotary table Powerful milling spindle 8,000 rpm Tool Changer with 16 Places Pick-up Magazine Direct position measuring system and centrally lubricated roller circulation guide for high long-term accuracy. Ball screw in the linear axes The machine is in excellent condition and is still energized.
We are selling our die-sinking EDM system here because of a new acquisition. This is a machine that was sold by the company MATRA at that time. This is a DECKEL DE35C. In the meantime, the company Exeron has taken over the service. The travel is: X=600mm Y=400mm Z=400mm The die-sinking EDM system has a 4-fold electrode changer The control system on the machine was recently overhauled, the power supply and the UPS were renewed. The machine was also otherwise continuously checked and maintained by the Exeron company in the event of malfunctions. Machine is running and is still on the power for a possible test. Operating hours are: 33196 hours. Various tool holders can be part of the price negotiation.
OKUMA MX55 Control: OSP700M Machine hours (spindle running time): 26,889 Accessories: various tool holder BT50; 4. Axis Partial Attachment
2012 KRAUSS MAFFEI 850-1400-1000 MX Z Injection moldin machine missing electrical and mechanical parts Find more here - / Contact us at -
Height=1.7 m, Overall length= 0.75 m, Overall width= 0.8 m, Net weight= 155 kg,
Height=2.2 m, Overall length= 1.1 m, Overall width= 8.2 m, Net weight= 3000 kg,
Height=2.55 m, Overall length= 2.4 m, Overall width= 3 m, Net weight= 3100 kg,
Height=1.55 m, Overall length= 1.3 m, Overall width= 1.1 m,
Height=1.85 m, Overall length= 2.5 m, Overall width= 3.5 m, Net weight= 4500 kg,
Height=1.51 m, Overall length= 0.57 m, Overall width= 0.67 m, Net weight= 91 kg,
Height=1.51 m, Overall length= 0.57 m, Overall width= 0.67 m, Net weight= 190 kg,
Height=1.06 m, Overall length= 2.22 m, Overall width= 1.12 m, Net weight= 977 kg,
Height=1.24 m, Overall length= 0.67 m, Overall width= 1.38 m, Net weight= 280 kg,
Height=1.57 m, Overall length= 0.71 m, Overall width= 0.71 m, Net weight= 120 kg,
Height=2.27 m, Overall length= 1.9 m, Overall width= 2.25 m, Net weight= 1400 kg,
Height=1.55 m, Overall length= 0.75 m, Overall width= 0.8 m, Net weight= 160 kg,
Height=0.59 m, Overall length= 0.76 m, Overall width= 1.45 m, Net weight= 230 kg,
Height=0.84 m, Overall length= 0.65 m, Overall width= 0.78 m, Net weight= 140 kg,
Height=0.59 m, Overall length= 0.82 m, Overall width= 1.55 m, Net weight= 235 kg,
Height=1.7 m, Overall length= 0.75 m, Overall width= 0.8 m, Net weight= 155 kg,
Height=0.46 m, Overall length= 0.35 m, Overall width= 0.38 m, Net weight= 35 kg,
maximum number of results exceeded
please refine your search
