m 3103 used for sale

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque64 NmTorque (100% DC)43 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.10000 rpmWeight approx.5600 KgTropical PackageTropical Package Option includes: - Active cooling unit for electrical cabinet - Additional ventilator for control panel Recommended from 35°C to max. 45°C environmental temperatureSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgPlug-in board with 2x4 free in-/outputsInputs / outputs programmable via M-functions, consisting of: 8 inputs 4 outputs ...

General SKU255X230 MakeHosokawa Alpine Type100 UPZ No.62390 Year of construction1998 Main Features Motor1.5 KW Inlet diameter50 mm Width100 mm Specified Features - Pin Mill Pin disc millcheck Rotor size100 mm Grinding room sizeDia. 180 mm Number of pins on house side:192 Number of pins on door side:192 Pin diameter0,3 mm Without sieve cagecheck Housing dimensions Dia. 180 mm With hoppercheck InletDia. 50 mm Feeding with vibro feedercheck 230 v. (Ex) Motor1,5 kW (400 v., 2835 rpm, (Ex)) Speed17500 rpm Information LocationBarneveld With switchgearcheck (as is) Floor space0,40x0,60 m Total height0,95 m Weight55 kgPin MillsNew arrivalsHosokawa AlpineMills > Pin MillsNew arrivalsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You  ...

This 8-axis DMG MORI Sprint 65 linear was manufactured in 2015. It features a maximum main spindle speed of 5000 rpm and a maximum main spindle bar diameter of 65 mm. The machine includes two turrets, each with 12 driven tool positions, and a robust coolant tank capacity of 650 liters. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 65 linear multi-spindle turning machine we have for sale. Contact us for further details.

This 3-axis EMCO PC MILL 125 was manufactured in 2000. It features an X-axis travel of 185 mm, Y-axis travel of 125 mm, and Z-axis travel of 200 mm. The machine includes an automatic tool changer with 10 stations and a clamping area of 420 x 125 mm. If you are looking to get high-quality machining capabilities, consider the EMCO PC MILL 125 vertical machining centre we have for sale. Contact us for further details.

Router 600 router Spindle to arm distance 600 mm Twin speed spindle drive motor with 2.2/1.5 kw Two spindle speeds 9000/18000 RPM Spindle tilt angle adjustment 45-90-45 degrees Vertical spindle stroke 80mm Height-adjustable table Pneumatic control of the spindle from the pedal

1 Piece Used Concrete Batching Plant Manufacturer: Liebherr Type: Mobilmix 60 Year of Make: 1988 Capacity: approx. 55 m³/h hardened concrete at 30 seconds mixing time Aggregate storage 4-chamber in-line silo 2 × 30 m³ + 2 × 40 m³ Mixer Liebherr ZE 1000/1500 incl. humidity probe / moisture measurement Dosing / Weighing Aggregates via weighing belt: max. 2,500 kg Cement scale: 250 kg Spirit level: 250 liters Cement silos 3 × 60 t – Manufacturer: Kurz 1 × 60 t – manufacturer unknown Control Gedis Operator's position control container Additional equipment Partial enclosure included Additive container included Immediately available Location: Ludwigslust / Northern Germany Offer is net ex location Subject to prior sale Errors and/or misrepresentations excepted Sale as seen, without guarantee and/or warranty Duplication, reuse, publi ...

CALZONI MRE3100I

The machine is in good technical condition, after prior agreement it is possible to test it. with the Siemens Shopturn system, including the feeder, the machine is fully equipped. BASIC PARAMETERS Working space max. turning Ø: ≈ 410–500 mm max. length: 800 mm distance between spindles: approx. 1020 mm swing diameter above the bed: ~700 mm realistic: ideal for shafts, flanges, bodies up to ~800 mm Travels (axes) X: ~480 mm Y: 100 mm Z: ~800–845 mm B axis: 110 (5-axis machining) C axis: 360 (indexing + interpolation) this makes it a full-fledged turn-mill (not a classic lathe) Spindles main spindle speed: ~5000 rpm power: ~25–34 kW passage: approx. 76–87 mm counter spindle speed: ~6000 rpm milling spindle (main difference compared to a classic lathe) speed: up to 12,000 – 20,000 rpm power: ~19–22 kW taper: HSK-A63 or Capto C6 allows: milling drilling tapping 5-axis simultane ...

1 Piece Used Concrete Batching Plant Manufacturer: Liebherr Type: Mobilmix 60 Year of Make: 1988 Capacity: approx. 55 m³/h hardened concrete at 30 seconds mixing time Aggregate storage 4-chamber in-line silo 2 × 30 m³ + 2 × 40 m³ Mixer Liebherr ZE 1000/1500 incl. humidity probe / moisture measurement Dosing / Weighing Aggregates via weighing belt: max. 2,500 kg Cement scale: 250 kg Spirit level: 250 liters Cement silos 3 × 60 t – Manufacturer: Kurz 1 × 60 t – manufacturer unknown Control Gedis Operator's position control container Additional equipment Partial enclosure included Additive container included Immediately available Location: Ludwigslust / Northern Germany Offer is net ex location Subject to prior sale Errors and/or misrepresentations excepted Sale as seen, without guarantee and/or warranty Duplication, reuse, publi ...

1 Piece Used Concrete Batching Plant Manufacturer: Liebherr Type: Mobilmix 60 Year of Make: 1988 Capacity: approx. 55 m³/h hardened concrete at 30 seconds mixing time Aggregate storage 4-chamber in-line silo 2 × 30 m³ + 2 × 40 m³ Mixer Liebherr ZE 1000/1500 incl. humidity probe / moisture measurement Dosing / Weighing Aggregates via weighing belt: max. 2,500 kg Cement scale: 250 kg Spirit level: 250 liters Cement silos 3 × 60 t – Manufacturer: Kurz 1 × 60 t – manufacturer unknown Control Gedis Operator's position control container Additional equipment Partial enclosure included Additive container included Immediately available Location: Ludwigslust / Northern Germany Offer is net ex location Subject to prior sale Errors and/or misrepresentations excepted Sale as seen, without guarantee and/or warranty Duplication, reuse, publi ...

Key data: 468 kN, 2043 g/PS, 83 mm

- Top condition - Used for only one tool, no conversions - 2 Core moves - 8-way hot runner regulator - Nitrided high-strength screw -

The machine is in good technical condition, after prior agreement it is possible to test it. ideal machine for complete machining in one clamping (turning + milling). Equipment and parameters: - main spindle + counter spindle (complete machining from both sides) milling spindle with B axis Mazatrol SmoothG control 36-position tool magazine Capto C6 / PSC63 internal cooling large number of accessories (jaws, clamps, holders, etc.) a functional postprocessor for SolidCAM is included in the sale significant time and cost savings when introducing the machine into production

MUBEA PROFI 500 hydraulic ironworker machine was built in Germany by Muhr und Bender Maschinenbau GmbH (Mubea). The machine, designed for complex machining of steel workpieces, is equipped with 4 individual workstations. They are capable of performing such processes as precise hole punching, as well as shearing flat bars, angle bars and bars. Each station is hydraulically controlled. The extremely robust design of the machine additionally ensures maximum process stability during even the most intensive challenges. All of this makes the offered Muhr & Bender PROFI 500 ironworker machine the perfect choice for increasing production efficiency in industrial facilities and locksmith workshops. Technical specifications of the MUBEA PROFI 500 ironworker machine General data - maximum press force: 50 t (500 kN) - number of workstations on the Muhr und Bender PROFI 500 machine: 4 Flat b ...

Spindle swivel: No; Sliding sled: Yes; Height adjustment: handwheel; Swivel adjustment: -; Milling jaw adjustment: manual; Altitude display: Scala; Swivel angle indicator: -; Milling stop indicator: Scala; Milling spindle diameter: 40 mm; Speeds: 3000, 4500, 6000, 9000; Motor power: 5 kW; Engine brake: Yes automatic; Extraction port: 2 x 120mm; Machine length: 1200mm; Machine depth: 900mm; Weight: 600kg;

spindle tilting: yes -5 bis 45°; height adjustment: electric; tilting adjustment: electric; fence adjustment: manuell; read out spindle height: digital; read out tilting: digital; read out fence: digital; spindle diameter: 30 mm; speed: 3000, 4500, 6000, 9000; power consuption: 5 / 6 kW; motor brake: Ja, automatisch; suction connection: 2 x 120mm; machine length: 2500mm; machine width: 1400mm; weight: 1100kg;

spindle tilting: yes 0 - 45°; height adjustment: manual; tilting adjustment: manual; fence adjustment: manual; read out height : -; read out tilting: Scala; read out fence: Scala; sawblade diameter: 30 mm; speeds: 3000, 4500, 6000, 9000; motor power: 5 kW; motor brake: yes, feed brake; suction connection: 2 x 100mm; machine length: 1200mm; machine depth: 1400mm; weight: 800kg; schwere Produktionsfräsmaschine

working width: 400 mm; maximum workpiece thickness: 300 mm; min. Workpiece length: 250 mm; aggregate: 2 Bürsteinheiten centrally adjustable and each with a single fine adjustment; 1. brush: methal brush, diameter 220mm; 2. brush: thynex brush granulation 80, diameter 220mm; height adjustment: handwheel; readout workpiece thickness: mechanical counter; feed speed: 4 - 12 m/min; motor power brushes: 2 x 3 kW; motor power feed: 0,37 kW; machine length: machine width: weight: In this machine, the brushes are pivotable diagonally to the feed direction, As a result, the edges are broken similar to oscillating brushes.

Number of spindles hole row: 16; Number of spindles horizontal: 5; Cup belt drill head: yes; Drill pitch: 32mm; Hold-down : yes / pneumatic; Power consumption: 2.2kW; Drilling unit: swivelling;

working width: 800 mm; working height: 300 mm; min. Workpiece length: 250 mm; aggregate: 2 Units seperatly adjustable; 1. brush: Metalbrush diameter 220mm; 2. brush: Tynexbrush, grit 80, diameter 220mm; height adjustment: manual; read out workpiece thickness: mechanical counter; feed speed: 4 - 12 m/min; motor power brushes: 2 x 5,5 kW; motor power feed: 0,37 kW; machine length: 1400mm; machine width: 1500mm; waight: 950kg;

working width: 300 mm; maximum workpiece thickness: 210 mm; min. Workpiece length: 300 mm; aggregate: 2 Bürsteinheiten central adjustable; 1. brush: tynexbrush granulation 60, diameter 180mm; 2. brush: tynexbrush granulation 80, diameter 180mm; height adjustment: handwheel; read out workpiece thickness: mechanical counter; feed speed: 4 - 12 m/min; motor power brushes: 2 x 3 kW; motor power feed: 0,37 kW; machine length: 1150mm; machine width: 800mm; weight: 390;

working width: 600 mm; maximum workpiece thickness: 300 mm; min. Workpiece length: 250 mm; aggregate: 2 brushing units seperatly adjustable; 1. brush: methal brush, diameter 220mm; 2. brush: tynex brush granulation 80, diameter 220mm; height adjustment: handwheel; read out workpiece thickness: mechankal counter; feed speed: 4 - 12 m/min; motor power brushes: 2 x 4 kW; motor power feed: 0,37 kW; machine length: 1400mm; machine width: 1200mm; weight: 650kg;

working width: 400 mm; maximum workpiece thickness: 300 mm; min. Workpiece length: 250 mm; aggregate: 2 brushing units separately adjustable; 1. brush: metal brush 220mm; 2. brush: tynex brush, granulation 80, diameter 220mm; height adjustment: handwheel; height adjustment: mechanical counter; feed speed: 4 - 12 m/min; motor power brush: 2 x 3 kW; motor power feed: 0,37 kW; machine length: 1400mm; machine width: 900mm; weight: 500kg;

Dowel hole drilling device: pitch 16, 22, 25, 32; Drilling depth: 145 mm; Elongated hole length: 240 mm; Height adjustment range: 135 mm; Motor power: 1.5kW; Speed: 2800 rpm; Extraction connection: 100 mm; Machine length: 1280 mm; Machine width: 960 mm; Weight: 250 kg; Solid slotted hole drill with a lever operation.

Joining unit: Yes; Edge thickness: maximum 3mm; Workpiece thickness: 8mm - 50mm; Workpiece width: min.110mm; Glue basins: granules, quick-change basins; Cross-cut scissors: yes; Caps / flush sawing: yes ; Milling Station: Bevel / Radius; Flat - Scraper: Yes; Radius Scraper: Yes; Infeed ruler adjustment: manual; Workpiece thickness adjustment: manual; Power consumption: 5 kW; Machine length: 3314 mm; Machine width: 1085 mm; Weight: 623 kg;

Pre-milling unit: yes; Pre-milling unit material removal: 0 - 2 mm; plastic edges: 0,4 - 3 mm; solid wood edges: 0,5 - 5 mm; Workpiece thickness: 8 - 50 mm; Minimum length of workpiece: 120 mm; Min. work piece width: 110 mm; Anti-adhesive spraying unit: yes; Edge preheating device: yes / with ceramic infrared lamp; Bonding unit: granulat / Glue container quick-change kit; Jack knife: yes; Flush trimming unit: yes; Corner copy unit: yes; Flush radius milling unit: yes; Radius scraper unit: yes; Area scraper unit: yes; Buffing unit: yes; Cleaning spray unit: yes; motor power: 5 kW; machine length: 3774mm; machine width: 1546 mm; machine height: 1337mm; weight: 842 kg; Top equipment for high productivity with low space requirements! Intuitive operation with the eye-S control and 10 large touchscreen: - HMI Maestro Active Edge - Graphic display of all processing units ...

General Manufacturer: Spinner Type: Microturn LT Year of construction: 2024 Control: Siemens One Travels: X 600 mm Z 350 mm Y +/- 50 mm Switch-on hours: 4,587 h Work spindle hybrid bearing Speed: 10,000 rpm Tool/movement Tool holder: BMT45 with Y-axis Tool turret: 12-speed Condition Condition: Used Functional: tested and fully functional Other equipment and accessories included: High-precision motor spindle with a circular shape deviation and 1um Power Chuck Röhm KFD-HS 125 Power Chuck SMW Autoblok BH-D 165-46-3-A05 Various owners and AGW High-pressure system 70 bar including fine filter Chip conveyor Spindle coolers

Finishing machine Fine planing machine MAPO Type SPO 180FH planing from above Optimal surface quality Machining speed 50 m/min. Elimination of intermediate sanding Problem-free processing of even damp wood Maximum working width 250 mm Chip thickness maximum 3/10 mm Passage height 1 – 180 mm Tool setting 0° - 60° Motor power 2.2 kW Weight 350 kg

We are selling the stock of the soap factory Riesa here In the last picture you will find an overview picture of the production hall with the machine inventory. Here we offer you: An automatic wrapping machine specially designed for bundling and packaging soap bars. Packaging material: The machine processes heat-sealable films from the roll, such as cellophane, polypropylene (PP) or PVC. Speed: up to 80 multipacks per minute; Product length: 75 mm ... 280 mm; Product width: 65 mm ... 120 mm; Product thickness: 25 mm ... 120 mm; Weight: approx. 1500 kg; Connected loads: 380-400 V/ 50 Hz; with control cabinet; Oil-tight steel frame that contains all mechanical movements Technical documentation available more photos on request Loading FREE Truck

Mobile cargo trestle Manufacturer: MSR Maschinen-Stahlbau Reutemann – GmbH Year of Make: 2015 Payload: 8000kg Design: 20,000 load cycles according to EN13155 Load changes performed:

Key data: 630 mm

THICKNESS PLANER model MARTIN T 44 second hand machine CE mark : Yes working conditions : Excellent technical details : useful working width mm. 630 maximum working height mm. 250 maximum removal mm. 8 n.2 feed speed mt./min. 6 / 12 motorized table positioning with digital reading n.4 knives "Tersa" main motor power Hp 7,5 net weight kg. 1115 volt. 380/50

CNC working center model BUSELLATO S-MASTER H150 second hand machine 3 axes working condition : very good CE mark : YES volt. 380/50 composition : 1. vertical router with automatic tools change 2. horizontal router 3. boring unit X / Y ( horinzontal and vertical ) 4. saw blade unit useful size (working range) mm. 3200 x 1350 working travel of the axes : X=4000 mm. Y=1430 mm. Z=265 mm. maximum panel thickness mm.120 maximum panel clearance mm.150 installed power 16 kW machine weight 4500 kg

Key data: 410 mm

SURFACE PLANER model SCM MINIMAX F1 second hand machine in Excellent working conditions CE regulation: YES instruction booklet and CE certification: YES security protection working width mm. 410 tables length mm. 2610 n.4 knives "Tersa" tilting guide up to 45° motor power Hp 5,5 volt. 380/50

Basic technical features: Capacity 12 Ton Gear weight: 5.6 Ton Telescopic Year 2006 Plant in excellent conditions of use.

Used mozzarella cheese production line. Line composition: 1. Cheese curdling tank. 2. DIMA cheese scalding and stretching device with a capacity of 400 kg/h. 3. Brine tank. 4. Cheese curd cooling tank. 5. Brine tank for packaging the mozzarella in brine. It's possible to supplement it with a device for forming cheese balls and blocks and a machine for packing cheese balls with filling.

Exzentnerschneckenpumpe von Mono Pumps sehr guter Zustand

Key data: 1875 mm, 1550 mm, 1345 mm

CNC Vertical Multitasking Machine CNC Control Mazatrol Matrix 2 Turning diameter 2000 mm Turning speed 10-300 R/min Milling head speed 25-5000 R/Min Movement X-Y-X-axis 1875-1550-1345 mm B-axis travel -30/120° C-axis indexing 360/0,0001° Tool taper Capto C8 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

aluminium caps ranging from diameters of 18 [mm] to 38 [mm]

Applications-sweet Dough Products, filled biscuits & potato product weight: 10-90 grams (0.35-3.17 ounces) of spherical product output: maximum 6000 pieces per hour (differs according to product weight) hourly extruding capacity: 180 kilograms (396.83 pounds) per hour hopper capacity: 15 liters

We sell 10032 x Micron 8GB DDR4 2666MHz Dual Rank Server Memory Manufacturer: Micron P/N: 18ASF1G72PDZ-2G6E1 In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complet ...

This 3-axis MAHO MH 1000 C/A was manufactured in 1985. It has approximately 29,192 machine hours and includes manuals and documentation. The protective doors are partially disassembled but included. If you are looking to get high-quality machining capabilities, consider the MAHO MH 1000 C/A universal machining centre we have for sale. Contact us for further details.

This 5-axis DECKEL MAHO DMU 60T was manufactured in 2001. It features an X-axis travel of 630 mm, Y-axis travel of 560 mm, and Z-axis travel of 560 mm. The machine includes a table size of 1000 x 600 mm and a tool magazine with 2x12 positions. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 60T vertical machining centre we have for sale. Contact us for further details.

This 5-axis Makino U6 HEAT was manufactured in 2016. It features an impressive X-axis travel of 650 mm, Y-axis travel of 450 mm, and Z-axis travel of 420 mm. The machine has a maximum workpiece size of 1,000 x 800 x 400 mm and can handle a maximum workpiece weight of 1,500 kg. If you are looking to get high-quality wire EDM capabilities, consider the Makino U6 HEAT wire EDM machine we have for sale. Contact us for further details.