m 3064 used for sale

Linear drive, linear gearbox, lifting gear, transfer rail, conveyor rail -Linear drive: with toothed belt -Stroke: 2480mm -Drive shaft: hollow shaft Ø 14 mm -Note: without motor, can be included for an additional charge -Transport dimensions: 2800/150/H135 mm -Weight: 24kg

Solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, on-off valve, pressure build-up valve -Manufacturer: Festo, on-off valve pressure build-up valve orig -Type: HEL-D-MIDI Mat. no. 170691 U643 series -Working pressure: 3 - 16 bar -Dimensions cardboard: 65/55/H130 mm -Weight: 0.5 kg.

Heat exchanger, cooling coil, cooling pipe, cooling spiral -Heat exchanger: cooling coil with fins -Dimensions: see photos -Material: aluminum -Transport dimensions: Ø65 x 365 mm -Weight: 0.5 kg

Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, liquid receiver -Manufacturer: Klimal, liquid collector -Type: FM 0.88 (M16/M06) -Pressure: up to 28 bar -Contents: 0.88 liters -Dimensions: Ø 80 x 257 mm -Weight: 0.7 kg

Connector, plug, sensor module -Manufacturer: Phoenix Contact, Y-distributor 5 pieces ovp -Type: SAC-3P-M12Y/2XM12FS PE -Screw lock: M12 -Price/delivery: complete -Dimensions cardboard: 115/80/H30 mm -Weight: 0.1 kg

Pressure vessel, pressure tank, pressure vessel, -Manufacturer: UM Alloy Products, stainless steel compressed air tank -Type: 316L MAWP 9 BAR -Contents: approx. 5 liters -Permissible operating overpressure: 9 bar -Dimensions: Ø 240 x 300 mm -Weight: 5.3 kg

cascade separator, vibrating chute, vibrating conveyor, vibrating chute, vibrating chute used Manufacturer: KARL MERZ AUFBEREITUNGSTECHNIK Type: ULA 570/50-650 built: 1987 Gutter approx. 500 x 1000 mm 2 vibrators each 0.84 kW Overall dimensions approx. 1300 x 1300 x 1400 mm e.g. For the separation of granules with shape defects, e.g. angel hair, double granules This cleaner was used for plastic granules. Subject to changes and errors in the technical data, specifications and prices as well as prior sale.

Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Solar fasteners: hanger bolts M12 x 400 -Type: M12 x 400 SW 9 fully assembled -Material: stainless steel V2A -Number: 43 pieces available -Price: per piece / minimum purchase 5 pieces -Weight: 0.3 kg/pc.

Toggle plug, anchor hook -Manufacturer: Würth, Toggle dowels 25 pieces/box -Type: W-KDW M10x180 -Number: 27 boxes available -Price: per box -Dimensions cardboard: 270/210/H100 mm -Weight: 3kg/carton

Toggle dowels, anchor hooks -Manufacturer: Würth, tilt dowel -Type: W-KDW M10 x 180 -Condition: according to pictures without tilting plate -Quantity: 11 pieces available -Price: per piece/minimum order 5 pieces -Weight: 0.1 kg/pc.

Technical data for the pallet rack beam: Shelving system: Jung Heinrich Type: MPB The scope of delivery includes: 01x Pallet rack traverse, used Material color: yellow Box profile: 80 x 50 mm Truss type: AUF'B'E0488 Agraffe: 4 HK (hook) Clear width: 2,750 mm 02x locking pins, used Finish: completely galvanized To secure the longitudinal beams Against unintentional lifting

Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Stall bolts: Solar fasteners 49 pieces -Type: M10 x 200 -Price/Delivery: complete -Complete weight: 5 kg

Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Hanger bolts: solar fasteners 49 pieces -Type: M10x180 -Price: per piece / minimum purchase 10 pcs. -Weight: 0.1 kg/pc.

Sensor, Probe, Immersion Probe, Float Switch, Magnetic Switch, Magnetic Float Switch -Manufacturer: KDG Mobrey, magnetic float switch ovp -Type: S179DB/F83 -Number: 5x float switches available -Price per piece -Dimensions: 405/120/H110 mm -Weight: 2.9 kg/pc.

Technical data for the pallet rack beam: Shelving system: Jung Heinrich Type: MPB The scope of delivery includes: 01x Pallet rack traverse, used Material color: yellow Box profile: 80 x 50 mm Truss type: AUF'B'E0488 Agraffe: 4 HK (hook) Clear width: 1,000 mm 02x locking pins, used Finish: completely galvanized To secure the longitudinal beams Against unintentional lifting

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square 95 x 95 mm -Type: Mubea 95 holder Ø 50 mm -Die: Ø 200 mm -Total dimensions: Ø 200 x 122 mm -Weight: 11.6 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool Ø 60 mm -Type: Mubea 60 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6.6 kg

Die holder, notching tool, punching tool, punch, punch die, punch stamp, -Manufacturer: Mubea, punching tool Ø 60 mm -Type: Mubea 60 5-12 Mount Ø 50 mm -Matrix: Ø 150 mm -Overall dimensions: Ø 150 x 120 mm -Weight: 6.7 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 70 mm -Type: Mubea 70 5-10 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6.6 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 70 mm -Type: Mubea 70 2 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 5,9 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 52 mm -Type: Mubea 52 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 125 mm -Weight: 6,8 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 55 mm -Type: Mubea 55 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6,7 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 90 mm -Type: Mubea 90 5-8 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 116 mm -Weight: 6.7 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 55 mm -Type: Mubea 55 1-4 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6,7 kg

Die holder, notching tool, punching tool, punch, punch die, punch stamp, -Manufacturer: Mubea, punching tool Ø 75 mm -Type: Mubea 75 5-9 Mount Ø 50 mm -Matrix: Ø 150 mm -Overall dimensions: Ø 150 x 120 mm -Weight: 6.6 kg

Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die -Manufacturer: Mubea, die Ø 90 mm -Type: Mubea 90 Mounting Ø 50 mm -Dimensions: Ø 90 x 115 mm -Weight: 3.4 kg

Die holder, notching tool, punching tool, punch, punch die, punch stamp, punching die, rotary die -Manufacturer: Mubea, die-cutting die, round die Ø 52 mm -Type: Mubea 52 -Overall dimensions: Ø 150 x 40 mm -Weight: 4.7 kg

Die holder, notching tool, punching tool, punch, punching die, punching die, punching die, round die -Manufacturer: Mubea, punching die round die Ø 75 mm -Type: Mubea 75 1 5 -Total dimensions: Ø 150 x 40 mm -Weight: 3,9 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, punching die, round die, die reduction -Manufacturer: Mubea, punching tool holder die reduction -Type: 105 - 80 mm mounts -Dimensions total: Ø 150 x 60 mm -Weight: 4.7 kg

Sensor-actuator distributor, distribution strip, interface, sensor-actuator distributor, sensor actuator, sensor/actuator box -Manufacturer: Weidmüller, Sensor-Actuator Distributor, Original Packaging -Type: SAI-8-M 4P M12 UT -Cardboard dimensions: 170/70/H45 mm -Weight: 0.2 kg

Lean emission controller for gas engines with cogeneration units, Motortech EMCon5 for sale, with original packaging

Exhaust pipe, transition piece, exhaust gas exhaust system, exhaust system -Manufacturer: Metaloterm, transition piece without flange for exhaust system ADAS -Type: LOT: PN91564 0914 -Dimensions: see photos -Total dimensions: Ø270 x 290 mm -Weight: 2 kg

Mazak Integrex 200 lll S + GL 150 F CNC turning-milling center with second spindle CNC control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 rpm X-axis travel: 580 mm Y-axis travel 160 mm Z-axis travel: 1045 mm B-axis travel: 225 ° mm C-axis indexing 360° Spindle nose A2-6 Tool cone Capto C6 Number of tools in the magazine 40 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail.

Screws, hexagon screws, flange nuts, hex nuts, collar nuts -Hex nuts: M8 to M30 645 kg -Sizes/Quantity: see photo parts list Price: complete Total weight: 645 kg

Proximity switch, proximity sensor, position switch -Manufacturer: Festo, proximity switch, original packaging -Type: SME-8F-DS-24V-K0.3-M8D 525 896 -Number: 20 switches available -Price: per piece -Packaging dimensions: Ø 100 x 10 mm -Weight: 0.1 kg/pc.

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Mann Filter, micro Top Air Filter Type C 17 160 Ovp -Number: 3x air filters included -Price: per piece -Packaging dimensions: 180/180/H230 mm -Weight: 1.1 kg/pc.

turning diameter: max. 320 mm turning length: 810 mm control: MSX 701 MAPPS III standard turning dia.: 200 mm Main spindle:: Number of revolutions: max. 6.000 min/-1 power capacity - main spindel: 22 / 18,5 kW Bar feed: max. 52 mm spindle bore: 61 mm C-Axis: 0,001 ° Subspindel:: Number of revolutions: max. 6.000 min/-1 power capacity - Sub spindle: 22 / 18,5 kW Bar feed: max. 52 mm spindle bore: 61 mm C-Axis: 0,001 ° Turret 1 + 3:: number of toolpositions: je 16 pos. Number of driven toolspositions: je 16 pos. Spindle speed - driven tools: max. 6.000 min -1 power capacity - driven tools: 7,5 / 5,5 kW Y - Axis: 110 (+65 / -45) mm Turret 2:: number of toolpositions: 16 pos. Number of driven toolspositions: 16 pos. Spindle speed - driven tools: max. 6.000 min -1 power capacity - driven tools: 7,5 / 5,5 kW Y - Axis: 110 (+45 / -65) mm axis stroke:: x-travel: 1-3: 210 mm y-travel: 1-3: ...

We have for sale milling and borig heads for Skoda HBM IV25, IR100, IFW1, IFW2, IFW3, IFH, IOT steady rest for W200 price from 1000-5000eur

A rotational shear viscometer according to Mooney for performing Viscosity tests (ML / MS 1+X), Stress Relaxation testing, Mooney Scorch, Delta Mooney testing on polymers as well as rubber compounds for quality control, research and development applications.

Horn, siren, bugle, bugle -Manufacturer: Marco, horn siren from Linde electric hand pallet truck -Type: 90/1 L -Dimensions: Ø 90 x 60 mm -Weight: 0.1 kg

Technical data for the pallet rack beam: Shelving system: META (Thyssen) The scope of delivery includes: 01x Pallet rack traverse, used Material color: orange Truss type: HN 100|20 Box profile: 100 x 50 mm Agraffe: 4 HK (hook) Clear width: 3,300 mm 02x locking pins, used Version: complete. galvanized To secure the longitudinal beams against unintentional lifting

fixed center, fixed live center, fixed morse taper, fixed center, center -Manufacturer: WMW ABW, fixed center point -Intake: Morse taper MK4 -Number: 17x centering tips available -Price per piece -Dimension: Ø 33/160 mm -Weight: 0.8 kg/pc.

fixed center, fixed live center, fixed morse taper, fixed center, center -Manufacturer: WMW ABW, fixed center point flattened -Intake: Morse taper MK5 -Number: 1x centering tips available -Price per piece -Dimensions: Ø 46/200 mm -Weight: 1.8 kg/pc.

fixed center, fixed live center, fixed morse taper, fixed center, center -Manufacturer: WMW ABW, fixed center point -Intake: Morse taper MK3 -Number: 12x centering tips available -Price per piece -Dimension: Ø 25/125 mm -Weight: 0.3 kg/pc.

face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW, face driver -Type: MS2 / MS2a -Recording: MK2 -Quantity: Front dimension 4x Ø 22 mm / 3x Ø 25 mm -Price: per piece

Face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW Rapid, face driver -Type: MS4 / Rapid4 -Recording: MK4 -Quantity: 4 pieces available -Price: per piece -Front dimension: Ø 46 mm

Oil hand pump, oil cabinet, oil cabinet, oil conveyor, oil dispenser, oil dispenser, oil station -Manufacturer: workshop technology, mobile oil dispenser with hand pump -Tank capacity: approx. l -Pump: hand operated -Hose: lockable with tap -Dimensions: 430/400/H770 mm -Weight: 15 kg

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Manufacturer: Moeller, Schütz power contactor -Type: DIL2AM-G -Number: 2x contactors available -Price: per piece -Dimensions: 105/70/H165 mm -Weight: 1.8 kg/piece

Slip ring, rotary joint, rotary transmitter, slip ring rotor, rotary head slip ring, column slip ring, slip ring transmitter -comes from: HUSS Rides, manufacturer of leisure facilities -with: rotary valve -for: Hydraulic oil 2x -for: Air 1x -for: electricity 11x

Fiber optic cable, fiber optic line, data cable, LAN cable, fiber optic cable, coaxial cable, antenna cable -Manufacturer: Bedea, coaxial cable 93 Ohm -Type: M17/90-RG 71 -Length: 200m -Price/delivery: complete -Dimensions roll: Ø 400 x 240 mm -Weight: 14.1 kg