m 3064 used for sale

DIETEL length stop - with coarse and fiin adjustment Type: Links 4.0 Length: 4.0 meters (net)                         4.2 meters (gross) Dimensions: Coarse hand adjustment, fine handwheel adjustment Dimensions: Absolute and incremental Battery: 3.8 volts Accuracy: 0.1 mm Display: LCD Included: stop arm - bring briefly to the saw Condition: functional controlled

Engine Make MWM Engine Type TCG 620 V16 K Power KW/RPM 1358 / 1500 Fuel Gas Volts 400 Hz 50 Year of Manufacturing 1997 GAS POWER HOLLAND 00316 38 63 90 71 whatsapp

Holtrop Jansma clean air extraction with swivel lock, flame suppression device & fabric protection damper Brand: Holtrop Jansma clean air extraction Type: MSO 350/300s Year of construction: 2015 M-Nr.: Woo560825S , 5960MS Clean air extraction: MSO 350/300 with star wheel swivel lock Intake supports: ø300-350 mm Length: 2.925 mm Width: 1,230 mm Height: 3,440 mm Weight: 740 kg Capacity: 7,900 m3 /hour Pressure: 1,965 Pa Power supply: 7.5 kW, 380V, 9 Amp Filter surface: 40 m2 Filter tubes: 45 pcs. Length filter tubes: 1,450 mm Diameter filter tubes: 200 mm Cleaning: included Noise: 77 dB(A) Fire protection: sprinkler installation with fire brigade connection Flame protection flap: 70°C melt cartridge Condition: Fully functional tested Optional: Automatic fire extinguishing: € 1.750 Return air - with summer-winter slider: € 350

Holtrop Jansma Suction Manufacturer: Holtrop Jansma Type: MSK300 Capacity: 6,000 m3/hr Year of construction: 2001 and 1999 Fan: ETD 300, 5.5 KW/1,500 rpm Explosion Pressure release: doors serve as pressure release in case of explosion Pressure measurement: Pressure gauge Cleaning: 0,09 KW/1500 KW Ruttelmotor Dimensions: 3.3503.0001.100 mm Scope of delivery: Filter system with built-in fan, control cabinet

Profile steel knife, shearing tool, cutting tool, separating tool, punching tool, punch, punch die, punch punch -Shearing tool for T-steel: 120 x 70 mm -Square: 25 mm -Round: 27mm -Type: 50305 -Dimension respectively: 175/140/15 mm -Weight: 5kg

working area: . mm material: . capacity: . Stück/h weight: 250 kg Machine number: 05.0501.01Nominal vacuum 0.5 h PAThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: . mm width: . mm height: . mm weight: . kg FahrbahrThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Brand: Eder & Müller Type: KT tilting table Year of construction: Description: Pneumatic swivel from horizontal to vertical position. Support grid extendable from 1500 - 2300 width and 1000 - 1600 height. Grooved rubber pad (original underneath or foam pads) Dimensions: Table length: 1500 - 2300 Table level: 920 mm Table width: 1000 - 1600 Weight: 90 KG

We constantly overhaul Martin T90, T90 profile and Martin T92 If you have any questions, please call us or email us. We speak Dutch, German, English and French. Brand: MARTIN Type: T90 Year of construction: 1991 M-No.: V188134 Feed table: 2000 mm Table height adjustment: Max. Spahnabname 10 mm Stop bar: Manual adjustment 10 mm Planer width: 12 - 260 mm Planer thickness: 8 - 160 mm Roll forming depth: Vertical spindle max. 12 mm Horizontal spindle max. 8.5 mm Thickness adjustment: NC and electrical adjustment Width adjustment: NC and electrical adjustment (optional: automatic pendulum axle control) Head measurement: 100 programs memory Spindles: Bottom: Tersa Z-4, ø125 mm, 5.5 KW Right & Left: Tersa Z-4, ø125 mm, 7.5 KW Top: Tersa Z-4 ø125 mm, 5.5 KW Speed: 6,000 rpm Feed: 4 – 25 m/min infinitely variable Min. product length: 380 mm Central control ...

We offer, used: Polyketting Conveyor belts - transport tracks with frequency-controlled / frequency converters on the motors for Tetra Pak beverage cartons 19 frequency-controlled motors More than 100 meters of transport track Subject to prior sale

liter capacity: . l total power requirement: .. kW weight of the machine ca.: . t dimensions of the machine ca.: . m Mixing units for coolant 3 piecesThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heat output capacity: . KW air volumen: . m³/h weight of the machine ca.: . t dimensions of the machine ca.: . m Tank size: 900x500x350 mmThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

First installation year 2010 - Bar capacity 52 mm - The machine has always worked with oil - Equipped with Lns Sprint S2 barfeed, front magazine type, and a lot of accessories (for both lathe / barfeed) - Fanuc 31i-A Control.

Machine Details Stock-No. 1105-03834 Type of machine Cold Circular Saw Make MEP Type TIGER 350 Year of manufacture 1996 Type of control conventional Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight base free truck Technical details saw blade diameter 350 mm Cutting diameter 250 mm stroke 170 mm Capacity 90 degrees: flat 235 X 70 mm capacity 45 degrees: flat 85 X 70 mm Cutting Speed 26/ 52 m/min total power requirement 3 kW weight of the machine approx. 700 KG Additional information VERY NICE

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Manufacturer: Martonair -Type: M/20152/6123D -Magnetic valve -Connection: 1/4 inch -Number: 1x valve available -Price: per piece -Weight: 0.6 kg

Sugar dissolving station Type Pulsmaster PI 7/7/10 Capacity: Contimol 6.000l/h

Ref. 0445 Nyloprint Cutter BKI Model KPS Serial 2133 Bauj. 1972 Cutting length 65 cm Tested, functional Ref. 0445 Nyloprint cutter BKI Model KPS Serial 2133, Year 1972 Cutting lenght 65 cm Checked, good working condition

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 45 , 33000 , 1250

Brand MARTIN Type T72A Comfort Control panel eye level integrated in the suction supports Saw blade height adjustment: Electric with digital display in the screen Saw blade tilt: Electric with digital display in the screen Parallel stop: NC control with digital display in the screen Parallelogramtic: Aluminium miter table, -46° to 46° digital display, angle-length calculation table Length stop: Aluminium 2,200 mm, extendable up to 3,200 mm with 2 punch stops and digital display Main saw: ø450 mm, cutting height: 170 mm, saw swivelling: 0° - 46° Speed control: 2000/2750/4000/5500 rpm Motor: 5.5 KW Scorer: ø120 mm, 3-axis electric adjustment Motor: 0.75 KW Trolley: 3,300 mm Cutting width: 1,250 mm Suction: Top: ø80 mm, Bottom: ø120 mm weight: 1.600 KG Condition: still to be cleaned, tested, etc.

Brand Martin Type T71 Main saw: max. ø450 mm (excl. Voorrits), Zaaghoogte: 170 mm, Zaag schuinstelling: 0° - 46° Scoring saw Yes Speed control: 2.800/4.000/5.500 tpm Motor: 5.5 KW hem table 2,500 mm Cutting width: 1,250 mm Long stop: 2-point length stop 2,200 - 3,300 mm Auflegetisch: met vast aanslagen vooer hoekverstelling Suction: Top: ø80 mm, Bottom: ø140 mm weight: 1.200 KG Condition: Fully functional and tidy machine

Brand Martin Type T71 Main saw: max. ø450 mm (excl. Voorrits), Zaaghoogte: 170 mm, Zaag schuinstelling: 0° - 46° Scoring saw Yes Speed control: 2.800/4.000/5.500 tpm Motor: 5.5 KW hem table 1,900 mm Cutting width: 1,250 mm Long stop: 2-point length stop 2,200 - 3,300 mm Auflegetisch: met vast aanslagen vooer hoekverstelling Suction: Top: ø80 mm, Bottom: ø140 mm weight: 1.200 KG Condition: Fully functional and tidy machine

Nominal mass of falling parts, taking into account the mass of the upper stamp (500 kg.), Kg. 5000 Actual mass of falling parts without top stamp, kg. 5030 Effective kinetic energy of falling parts at full successive impacts, kgc m 12500 The greatest working stroke of a woman, mm. 1300 The smallest height of dies without shanks, mm. 400 Distance between guides in the light, mm. 800 The length of the woman in the direction perpendicular to the front of the hammer, mm. 1180 Steam (air) pressure before entering the cylinder, atm. 7-9 Nominal mass of the upper die, kg 500 The largest mass of the upper die, kg. 1500 The highest permissible steam temperature, ⁰C 200 weight 145-148ton, weight of anvil block 75+22 ton.

Manufacturer: Elumatec Type: MGS 72/30 Swivel range 0° - 45° infinitely adjustable to the left and right Resting points 15° - 30° - 45° Saw blade:: ø380mm Motor: 3 kW Speed: 2800 tpm Weight 120 kG Condition functionally tested

1 MÜLLER label cut and fold machine type LCFR2, year 2017

Replacement knife for table shears, replacement blades, cutting knives, shear knives -Dimensions: 79 x 19 mm -Lengths: 2x 1055 mm -Hole spacing: 50/238 mm -Bore: 17 mm countersunk -Price: complete -Weight: 24 kg

Oil filter system, oil purification system, oil transfer system, hydraulic unit, hydraulic pump, hydraulic pump, hydraulic test pump -Magnetic filter -for: hydraulic and other oils -electrical control -Dimensions: 820/420/H1030 mm -Weight: 70 kg

Metronic Romex RFD 2000/4 Type: Stack Material: 20-250my all common materials printable Inking units: 4 Printing ink: Fuel or watercolor Cylinder circumference: from 250mm- 510 mm Cliché thickness: 2.84mm /1.14mm Inking units with doctor blade chambers Material width: 520 Print width: 520 Winder: pneumatic unwinding Dryer: Hot air Side edge controls: 2x BST Railway observation: BST Inline Corona 4,5KW SOFTAL Explosion protection

MAK 32C cylinder heads In brand new condition 18 Pcs available With BV class certificate In our stock in Istanbul Turkey

Refer to code 1002 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1003 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1007 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1015 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Pressure control valve, pressure control directional control valves -Manufacturer: Festo -Type: MS4-LRB-1/4-D6-A8-AS -Operating pressure: 0-10 bar -Number: 1x valves available -Price: per piece -Dimensions: 130/60/H40 mm -Weight: 0.22 kg

Mayrhofer cross-cut saw Capping height: 20 cm Total length: 7,8 Meter with 6 saws 6 x Motor 5,5 kW Type H90 0 pcs saw variable (+-20 cm) 3m saw fixed 4m saw fixed 4.5m saw fixed 5m saw fixed 6m saw variable (+- 20 cm) very good condition - immediately available from stock Location: Austria, 3525 Lugendorf

Reconditioned marine transmission ZF 63 E-Volvo for sale. Translation: A=1.75, B=1.77. The gearbox has been expertly overhauled and tested in our company.

Overload safety clutch, overload protection -Manufacturer: Mayr -Type: 800 N -Admission: M16 -Dimensions: 300/110/H50 mm -Weight: 2.3 kg

For sale is a ZF 220 transmission with ratio 1:1.500. The transmission is currently still installed on a Volvo Penta D5A-B TA, but can be disconnected at any time. This display expressly refers only to the gearbox shown.

A new ZF 25 boat reversing gearbox with mechanical control block and associated attachments suitable for Yanmar is sold. Ratio 2,800:1.

sheet width: 2020 mm plate thickness: 2 mm control: Beijer daylight upper clamping: 100 mm Bending angle: 0 - 135 ° upper clamping drive: 0,375 kW bend clamping drive: 1,125 kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: 3 x 1,1 x 1,75 m Foot switch with emergency stop: Segmented upper tool: Oil filling: exklusive Light barrier control: Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rotary drive, actuator, actuators, gear motor, rotary valve, pneumatic cylinder actuators -Actuator for: gate valves, locks, ball valves ... -Construction: hollow shaft -Diameter hollow shaft: 120 mm -Number: 3x drives available -Price: per piece -Dimensions: 1700/500/H650 mm -Weight: 450 kg

Refer to code 1048 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1016 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Brand: MATELEC Model: 3 phase ONAN Transformer Power rating: 1000kVA Voltage: 15 - 20kV / 410V Additional info: Dyn 11, 50Hz Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.

Transport pickups, crane pickups -Spare part: from a machining center manufactured by Sigma type Mission 5 -Take: Ø 140 mm -Rezes recording: mm -Pitch circle: mm -Number: 4 pieces available -Price: complete -Dimensions: -Weight: 23 kg

Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Year of manufacture: unknown Condition: Used Model/Type: Strap Manufacturer: unknown total length: approx. 730 mm Total width incl. motor: approx. 760 mm Total width without motor: approx. 730 mm Belt width: approx. 600 mm Strap Type: Smooth Colour: Grey/ Blue Material: Stainless steel/ Aluminum Frame height: approx. 100 mm Drive type: Motor Includes SEW motor Thanks to the excellent workmanship of the belt conveyor, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics. For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We would be happy to provide you with an individual offer or advise you on co ...

Stock number: 3778 CUTTING LINE Manufacturer: MORGAN , Type: 1330 x 0.7 - 3.2 mm Specifications: Size scissors length 1330 mm Size sheet thickness 0.7 - 3.2 mm - Roller feed 2 pc dia. 100 rools Composed of: - Straightening machine 5 pc. dia 100 Reels - Drain reel 5 ton dia. 530-610 mm tone - Scissors Morgan 1500 x 3.2 mm Accessories: Coil trolley 5 ton Length: 6500 mm, Height: , Width: 33.00 mm, Weight:

Specifications: Capacity: 60 t Passage between stand: 820 mm Working area, max.: 820 x 300 mm Piston stroke: 400 mm Flow speed: 6.1 mm/s Return speed: 10 mm/s Motor power: 3 kW Width: 1460 mm Depth: 850 mm Height: 2400 mm Weight, approx.: 700 kg Equipment: - Laterally movable cylinder - Spacious work area - Height-adjustable table - Torsion-resistant design made of welded steel -Manometer - Fine adjustment of pressure - Additional hand pump

Specifications: Capacity: 100 t Passage between stand: 1010 mm Working area, max.: 1010 x 300 mm Piston stroke: 400 mm Flow speed: 7.12 mm/s Return speed: 13.42 mm/s Motor power: 4 kW Width: 1600 mm Depth: 850 mm Height: 2450 mm Weight, approx.: 1000 kg Equipment: - Laterally movable cylinder - Spacious work area - Height-adjustable table - Torsion-resistant design with welded steel -Manometer - Fine adjustment of pressure - Additional hand pump

Specifications: Capacity: 160 t Passage between stand: 1100 mm Working area, max.: 1100 x 350 mm Piston stroke: 400 mm Flow speed: 6.2 mm/s Return speed: 6.8 mm/s Motor power: 5.5 kW Width: 1640 mm Depth: 1000 mm Height: 2550 mm Weight, approx.: 1300 kg Equipment: - Laterally movable cylinder via rack, pinion and handwheel - Spacious work area - Height-adjustable table - Torsion-resistant design with welded steel -Manometer - Fine adjustment of pressure - Additional hand pump

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Manufacturer: MTF-Technik Year of construction: 2011 Model/ Type: GL-HM140 Condition: Used T20 cleats - approx. 700mm pitch total length: approx. 4600 mm Total width incl. motor: approx. 860 mm Total width without motor: approx. 650 mm Belt width: approx. 625 mm Strap Type: Smooth with studs Material: Steel/ Aluminum Frame height: approx. 110 mm Includes feet on wheels (height adjustable) Includes engine Thanks to the excellent workmanship of the belt conveyor, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We would be happy to ...