m 3064 used for sale

Power converter, power supply, power supply, switching power supply, power supply module -Input: 3 x 360-520 V AC 50/60 Hz 2.40-1.70 A. -Output: 24 V 40 A DC -Price: per piece -Number: 6 pieces -Dimensions: 140/160/H130 mm -Weight: 3 kg/piece

3 phase squirrel cage motor, 90 kW 1007 r/min, 400 V D, 50 Hz, 158,000A, cos.phi 0.810, TCLB, 40 degrees C, 1000 m, price ex works

Unimog Mercedes - many more bodies/attachments could also be provided. Price ex works, in 2007 the Unimog was retyped.

TIG hose assembly, welding torch, hand welding torch, TIG torch -with: burner body -Length: 4.25 m -Tuchel: 5-pin connector -Weight: 2.5 kg

I sell the complete window construction profiling line: 1 pcs. 5-spindle four-side planer with saw Weinig Unimat 23EL - without grinding machines HESS - other replacement machine by appointment 2 tap cutting and slotting system Weinig Unitec 10. 2 pcs. profile automatic converter center Weinig Univar 10. - Set of complete Weinig automation feeders and foerderer. - without a central computer - must be added and programmed. Year of construction 1997. Milling heads OERTLI. Available the same. Immediately dismantled with original pallets. Price together only 48,000 euros. Condition very good !

see performance data on photo with data

Measuring transducer, power measuring transducer, real power measuring transducer -Manufacturer: Müller Ziegler, transmitter -Type: Pdr-MU 20 kV/100 V 120/1 A 4.156-0-4.156 MW -Dimensions: 85/45/H113 mm -Weight: 0.4 kg

Measuring transducers, power measuring transducers, real power measuring transducers -Manufacturer: Muller Ziegler, transmitter -Type: Pdr-MU 30 kV/100 V 50 Hz 150/1 A 500-0-7500 kW -Price: per piece -Number: 2 pieces -Dimensions: 85/45/H113 mm -Weight: 0.4 kg/piece

table diameter: 400 mm table load: ? t table height: 140 mm total power requirement: kW weight of the machine ca.: 100 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used scrap shears / Aligator scissors Manufacturer: Schlüter Maschinenfabrik Type: MGA 6 Year of construction: 1974 specifications: Cutting performance at 37 kg/mm²: Round iron: up to 18 mm Square liners: up to 15 mm Flat iron: up to 60 x 8 mm Sheet: up to 7 mm

Rotary hammer, chisel hammer, combination hammer, Bosch hammer, impact drill, chisel hammer -Nominal consumption: 500 W -Drilling/hammer drilling -Speed: 0 - 2200 rpm -Dimensions: 290/80/H200 mm -Weight: 2.2 kg

Inductive sensor, electronic sensor, position encoder, displacement sensor -Manufacturer: MTS Temposonics, position encoder -Type: TTM-RB-M-1000-R -Measuring length: 1000 mm -Dimensions: 1200/53/H46 mm -Weight: 0.8 kg

dimensions of saw-band: 3650x27x0,9 mm speed: 15/100 m/min capacity 90 degrees: round: 280 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330x260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: square: 250 mm capacity 45 degrees: flat: 270x200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170x170 mm total power requirement: 2,2 kW vice: 340 mm weight: 1240 kg dimensions: 2020x2040x1740 mm Electro-hydraulic fully automatic band saw with additional, semi-automatic Function, for cuts from 0 ° to 60 ° left. Compact machine with the new Windows CE based MEP-50 controller and 7 touch-screen display for managing all machine parameters. Easy operation and control of all cutting parameters in real time. Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings, Single stroke 6 ...

Measuring transducer, power measuring transducer, real power measuring transducer -Manufacturer: Müller Ziegler, transmitter -Type: Pdr-MU 690/400 V 50 Hz 150/1 A 0-150 kW -Number: 4x devices available -Price: per piece -Dimensions: 85/45/H113 mm -Weight: 0.4 kg/piece

Measuring transducers, power measuring transducers, real power measuring transducers -Manufacturer: Muller Ziegler, transmitter -Type: Pdr-MU 575/332 V 50 Hz 3000/1 A 500-0-3000 kW -Dimensions: 85/45/H113 mm -Weight: 0.4 kg

Stack turner Hotung Mini ET; good condition; cleaned and tested; Format 950x660mm; Load capacity 750kg; Max. Stack height 1210mm. Pile turner Hotung Mini ET; good condition; cleaned and checked; Format 950x660mm; lifing capacity 750kg; max.pile hight 1210mm.

Line regulating valve, shut-off valve, ball shut-off valve -Manufacturer: Alco, ball shut-off valve, unused in original packaging -Type: BVE M10/PCN 806733 -Connection: 10 mm -Dimension box: 135/95/H50 mm -Weight: 0.2 kg

Horizontal laminar flow offer clean air to ISO class 4 for a particle free work environment. Working area: 1784 x 540 x 715 mm.

Forced-action mixer, agitator, stirring device, mixing tool, pneumatic hand mixer, pneumatic agitator -Agitator: Pneumatically operated, unfortunately no type designation -Speed: adjustable -Stirring rod: Ø 140 x 600 mm -Overall dimensions: 300/140/H830 mm -Weight: 6 kg

For sale: Magnetrol Wave Radar Transmitter Order number: 7380.16 For more information, please call or send an email. Phone: 06-20758459 E-mail: wh.derikxgmail.com The price is exclusive of 21% VAT.

Line regulating valve, shut-off valve, ball shut-off valve -Manufacturer: Alco, ball shut-off valve, unused in original packaging -Type: BVA M12/PCN 015341 -Connection: 12 mm -Dimension box: 220/80/H90 mm -Weight: 0.5 kg

Dishwasher, thermal disinfector, disinfector, laboratory dishwasher, 130 kg, comes from a school, price ex works

Marine diesel piston, diesel engine piston -Piston: Ø 199 mm -Piston height: 265 mm -Piston pin: Ø 75 mm -Distance from center of piston pin to top of piston: 155 mm -Quantity: 2 pieces available -Price: per piece -Weight: 9.025 kg

Dishwasher, thermal disinfector, disinfector, laboratory dishwasher, comes from a school company, price ex works

Guide track, guides, tool slide, cross table, cross slide, bed guide track, machine bed -Guide track: from Meuselwitz lathe -Measures: see drawing in the photos -Dimensions: 780/355 / H390 mm -Weight: 135 kg

Pilz safety system PNO m0p 773110, stocked goods, no functional test, manufacturer number: 773110. EAN number: 4046548013153

Breast pump stainless steel with housing, manufacturer MKT Malmi, vario gearbox Lenze, electric motor - Elektrokovina T 90L4, power 1.5 kW/220/380 V, special feature: Vario gearbox Lenze

proximity switch -Ø: 3.6 x 20.5 -stainless -Protection class: IP 67 -Number: 7 pieces -Price: complete -Weight: 70 g

We offer 178 pieces Meva Mammut Schalschlösser a. 14,00€/ piece + VAT. The locks are in a Doka reusable container 120 x 80. The locks are controlled and sorted and fully operational. If you have any questions about 0176, Mr. Becker 70044689 Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Phone 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ warehouse address: Birkenstrasse 15 D-89185 Humlangen-Hüttisheim Register court Ulm: HRA722943 VAT ID NO: DE279047055

Relief powder system Caslon Mini Supa Duchess; good condition; cleaned and tested; with an investor, which is sold as defective because parts are missing; Working width 330mm; Vibration function. Thermography machine Caslon Mini Supa Duchess; good condition; cleaned and checked; with feeder which one will be sold als spare part becuase of missing parts; working width 330mm; Joggers.

New industry-standard hotbox for up to 400 bar and up to 28 litres per minute. EQUIPMENT - Epoxy coated steel frame with stainless steel cover - 4-wheel chassis with solid rubber tyres - Connection hose 1,5m - Water inlet temperature max. 60° - Heating capacity approx. 90 kW - Water outlet temperature in the steam range up to max. 140°C - With thermal switch and flow monitor Diesel tank: 20L Power supply: 1x 230V Dimensions: (L x W x H): 700mm x 570mm x 800mm Weight: 65kg Shipping possible. Errors and prior sale excepted. We refer to our terms and conditions.

New industry-standard hotbox for up to 300 bar and up to 28 litres per minute. EQUIPMENT - Epoxy coated steel frame with stainless steel cover - 4-wheel chassis with solid rubber tyres - Connection hose 1,5m - Water inlet temperature max. 60° - Heating capacity approx. 90 kW - Water outlet temperature in the steam range up to max. 140°C - With thermal switch and flow monitor Diesel tank: 20L Power supply: 1x 230V Dimensions: (L x W x H): 700mm x 570mm x 800mm Weight: 65kg Shipping possible. Errors and prior sale excepted. We refer to our terms and conditions.

New hotbox in the industry standard for max. 200 bar and up to 28 liters per minute. EQUIPMENT - Epoxy coated steel frame with stainless steel cover - 4-wheel chassis with solid rubber tyres - Connection hose 1,5m - Water inlet temperature max. 60° - Heating capacity approx. 90 kW - Water outlet temperature in the steam range up to max. 140°C - With thermal switch and flow monitor Diesel tank: 20L Power supply: 1x 230V Dimensions: (L x W x H): 700mm x 570mm x 800mm Weight: 65kg Shipping possible. Errors and prior sale excepted. We refer to our terms and conditions.

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter -Manufacturer: Phoenix Contact, DIN rail power supply Order No.: 29 38 74 3 -Type: MINI-PS-100-240AC/2X15DC/1 -Price: per piece -Number: 14 pieces -Dimensions: 100/45/H110 mm -Weight: 0.3 kg

Power generator, emergency power generator, generator, power generator, power generator, emergency power generator -Electric start -Power: 3.8 kVA 50 Hz -petrol engine -only: 95 operating hours -2x Schuko: 230 Volt, 1 socket slightly damaged -Dimensions of unit: 580/530/H615 mm -Weight: 79 kg

transformer -Marcus: M3785OT 80C RISE -VA: 1000 VA -Frequency: 60 Hz -Voltage: 230/120 V -Price: per piece -Number: 2 pieces available -Dimensions: 160/130/H110 mm -Weight: 11.3 kg

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter -Manufacturer: Phoenix Contact, DIN rail power supply, Ord.No.: 29 38 73 0 -Type. MINI-PS-100-240 AC/24 DC/2 -Price: per piece -Number: 4 piece -Dimensions: 100/45/H110 mm -Weight: 0.3 kg

I sell the scM Multiflex window angle system. Milling heads VIVALDI EU68mm. Incision + cone spindle right / cone side. 2 pcs. profile milling spindle + glass list cutting saw left / roll forming side Available the same.

Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Motor: Thrige-Titan type MTL 11-7 D -Motor: 24 V 3 kW 3000 rpm -Tank: 200/290/H230 mm -Dimensions: 210/320/H510 mm -Weight: 42 kg

Bench Grinder - Diamond grinding wheel MAPE BDS.100 Machine for sharpening cutting tools Rotation: 3000 RPM Integrated lubricant pump Equipped with: 2 diamond grinding wheels Ø 110 mm + 1 spare wheel (see abacus) Voltage: 380 V Length: 1000 mm Depth: 700 mm Total height: 1400 mm Weight: approx 200 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 320 mm -Piston diameter: 80 mm -Piston rod: 25 mm -Max. Pressure: 16 bar -Price: per piece -Number: 2 pieces -Dimensions: 545/93/H93 mm -Weight: 6.75 kg/piece

Cooling capacity: 600 kW Year of manufacture: 2007 Options: with economizer Heat exchanger: shell and tube Refrigerant circuit: 2 pcs. Compressors: 2 pcs. McQuay (screw) Type of refrigerant: R134a Number of fans: 10 pcs. Dimensions: 5.25 x 2.25 x 2.45 m Weight: 4 375 kg Condition: excellent Product quantity: 1 pc.

Oven ATA Maxi temperature: 300° C Power: 1,5 kW Voltage: 380 V Internal oven dimensions: Depth 500 x W 295 x H 200 mm External dimensions: L 600 x H 560 x Depth 800 mm Weight: approx 80 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Martonair type: M3332 150 DF -Stroke: 150 mm -Piston rod: Ø 25 mm -Number: 2 pieces available -Price: per piece -Dimensions: 90/130/H640 mm -Weight: 9.7 kg/piece

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder -different recordings: 10 -from: WNT-Mastertool -Sale: only complete -Price: complete -Weight: 36 kg

Grinding wheel puller, cup wheel puller, double bench grinder puller, flat grinder puller, cylindrical grinder puller, puller head, dressing head for grinding machines -Edition: mm -Number: 1x disc puller available -Price: per piece -Dimensions: 310/170/H200 mm -Weight: 6.7 kg

COLCHESTER MASTIFF V/S 1800 universal lathe was built in Great Britain in 1998. The machine allows machining a workpiece with a maximum length of 2000 mm and a diameter of 560 mm (above the bed) or 370 mm (above the support). The 11 kW spindle of the lathe with reading rotates at 1800 rpm. The lathe is equipped with a MITSUBISHI Freqrol A200 inverter and a SONY LH52 digital display. Total weight of the machine is 3250 kg. Technical data of the lathe COLCHESTER MASTIFF V/S 1800 - turning length: 2000 mm - turning diameter above the bed: 560 mm - turning diameter over support: 370 mm - inverter: MITSUBISHI Freqrol A200 - digital display: SONY LH52 - spindle speed: 1800 rpm - spindle bore diameter: 90 mm - spindle power: 11 kW - MASTIFF VS 1800 machine dimensions: (L x W x H): 3750 x 1700 x 2100 mm - total weight: 3250 kg

Connector, plug, sensor module -4-pin -Screw locking: M12 x 1 -Nominal voltage: 250 VAC/DC -Cable entry: max. 6 mm -Connection: max.0.75 mm² -Number: 60x available -Price: per piece -Minimum order: 4 pieces -Weight: 20 g

Sensor-actuator distributor, distributor strip -Connection: 15 - 30 V DC -3 pole -Distributor: 4-way -Weight: 0.1 kg

Power supply unit, converter, power supply, switching power supply -Type: PFC250-4350FM -Input: 85 - 250 V 50/60 Hz 5 A -Output: 3.3 V 40 A, 5 V 20 A, 12 V 6 A, 12 V 3 A -Number: 2x available -Price: per piece -Dimensions: 260/120/H65 mm -Weight: 1.7 kg