129,846 used machines on RESALE, but how to find them? Machine Search
: 14 mm Boring power: 15 mm : MK 2 bore depth: 70 mm throat: 180 mm : bis 275 mm : 529 mm table surface area: 250x220 mm column diameter: 65 mm Total height: 890 mm total power requirement: 0,6/1,0 kW : 420-2100 U/min. weight of the machine ca.: 63 kg Machine with CE mark! new machin Domestic equipments: - Stepless speed control - Table adjustment via rack - Digital speed display - Full motor protection - drill protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Power fork with spring compensation for long goods or pallets payload 2500 kg Fork length 800 mm Year of construction 2015 Position of the forks according to customer requirements The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12
Muller Martini Progress S 24 or 25 inch Year : 1996 Print width: 20" Maximum print speed: 335 m/min 5 printing units, type 2047 UV dryer: yes, see below 2 turning crosses Camera: BST SHS 3000 Pro camera system Cross-cutter: yes, MM 2088 Double-hole punching (24" + 25") Stack delivery: MM UNISTACK 2000 Turning crosses: 2 pcs Cylinder range: convertible to 24" and 25" Additional magnetic cylinder (for die-cutting plates) and one perforating cylinder Numbering tower: yes Color control: overall, manual color zone control UV drying: Baldwin SpecTronic Spiral folding 24" and 25" Double-hole punching (24") + 25") Rubber washing system: no Unwinder 2036/2037 and rewinder 2033
continuous grilling line suitable for frying, cooking or browning electric heating 400 kW 510A, 3 x 400V, 50Hz with bottom and top band : bottom and top contact frying Overall dimensions (L x W x H) : ± 7,700 x 2,300 x 2,400 mm Cooking time: from 10 sec. to 5 min. Useful length 6,000 mm Track width 1,060 mm max 260 degrees product height 250 mm Air: 6 bar - 100 l/min Water: 65 degrees - 2 bar - 30 l /min variable frying height infinitely variable speed pneumatically controlled tape Siemens PLC control with belt washing system
For sale:Micro Motion MASS flow sensor Type: CMF 200 ANSI 300 LBS Exclusive channel Order number: 8000.3 For more information, please call or send an email. Phone: 06-20758459 E-mail: wh.derikx@gmail.com The price is exclusive of 21% VAT.
For sale: Micro Motion MASS flow sensor 1" Order number: 8000.22 For more information, please call or send an email. Phone: 06-20758459 E-mail: wh.derikx@gmail.com The price is exclusive of 21% VAT.
turning diameter: 800 mm turning length: 1500 mm swing diameter over bed slide: 250 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Next image can not be found: d833 tacchi mt400 (2) Brand: Tacchi Type: MT400 Distance between centers: 1.500 mm Centre height: 400 mm Swing over bed: 800 mm ø Swing over support: 250 mm ø Swing in the gap: 550 mm ø Spindle boring: 130 mm ø 3-Jaw chuck: 390 mm ø Digital read-out Rapid traverse on longitudinal and cross travelling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 105 mm x-travel: 1000 mm y-travel: 1000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Juaristi Type: MDR105 CNC CNC brand: Heidenhain CNC model: TNC145 Year of make: 1983 Table length: 1.000 mm Table width: 1.000 mm X: 1.000 mm Y: 1.000 mm Z/W: 1.000 mm Spindle taper: ISO 50 Spindle diameter: 105 mm ø The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Generator set Condition: Used – very good condition Power: 2200 kVA Availability: Available Description : Diesel generator emergency Generator : SDMO X2200 C Range : Open set Engine : MTU Type : 16V4000 Year : 2008 Operating running hours : 23 H integrated diesel tank Scope of supply : Control panel Cooling system by table cooler Price on request Groupe MMO, European leader in the revaluation of generator sets If you have a specific need or request, contact us: show contacts #4012 #cummins #decarbonisation #perkins #pramac #groupeelectrogene #rachat_groupe_electrogene #revalorisation #achat_vente #sdmo #volvo_penta #aman #caterpillar #renault #johndeere #iveco #poyaud #doosan #mtu #kohler #detroit_diesel #wartsila #jenbacher #kta50
Generator set Condition: Used – very good condition Power: 2200 kVA Availability: Available Description : Diesel generator emergency Generator : SDMO X2200 C Range : Open set Engine : MTU Type : 16V4000 Year : 2008 Operating running hours : 23 H integrated diesel tank Scope of supply : Control panel Cooling system by table cooler Price on request Groupe MMO, European leader in the revaluation of generator sets If you have a specific need or request, contact us: show contacts #4012 #cummins #decarbonisation #perkins #pramac #groupeelectrogene #rachat_groupe_electrogene #revalorisation #achat_vente #sdmo #volvo_penta #aman #caterpillar #renault #johndeere #iveco #poyaud #doosan #mtu #kohler #detroit_diesel #wartsila #jenbacher #kta50
Generator set Condition: Used – very good condition Power: 2200 kVA Availability: Available Description : Diesel generator emergency Generator : SDMO X2200 C Range : Open set Engine : MTU Type : 16V4000 Year : 2008 Operating running hours : 23 H integrated diesel tank Scope of supply : Control panel Cooling system by table cooler Price on request Groupe MMO, European leader in the revaluation of generator sets If you have a specific need or request, contact us: show contacts #4012 #cummins #decarbonisation #perkins #pramac #groupeelectrogene #rachat_groupe_electrogene #revalorisation #achat_vente #sdmo #volvo_penta #aman #caterpillar #renault #johndeere #iveco #poyaud #doosan #mtu #kohler #detroit_diesel #wartsila #jenbacher #kta50
MWM TCG 2016 V 8 Exchange Engine / Shortblock It is a refurbished replacement engine. Repaired according to manufacturer guidelines and RAL quality seal. Further information on the scope and design can be found on our homepage buecker-essing.de Out- and installation as well as service around engine and CHP can be optionally provided. Please contact us for a written quote. We also have other replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock.
Deutz MWM Gas Power Generator Set 150 kVA - - - - - Engine: - Deutz / MWM (Germany) - Model: G234 V12 - 12 cylinders - Gas (natural gas) - Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: AvK (A.van Kaick, Germany) - 150 kVA - 230 / 400 volts - 50 Hertz - - - - - Condition: - Used - The device comes from a waterworks and was installed there for emergency power protection / for occasional use - The engine was cooled via an external cooling circuit - - - - - Transport: - Germany-wide transport is possible for an extra charge - To be able to quote an exact freight price, please send us an inquiry with your zip code - - - - - Price and payment: - Payment: Prepayment - An invoice with VAT will be generated - - - - - Other: - Sale of used machines in their current condition to tradespeople under exclusion of any warranty
MOSA generator set 15 kVA soundproofed - year 2014 - 500 hours - - - - - Engine: - Lombardini (Italian manufacturer of diesel industrial engines) - 2 cylinders - Diesel - Air-cooled - - - - - Generator: - Manufacturer: Sincro (Italy) - Power: 13.5 / 15 kVA - 230 / 400 volts - 50 Hertz - - - - - Control cabinet: - Ignition lock for starting - Generator monitoring: Volts, Hertz - Engine monitoring (engine temperature, fuel shortage, battery voltage, oil level) - Hour meter - 1x 400V 32A socket - 1x 400V 16A socket - 1x 230V CEE socket - 1x 230V Schuko socket - - - - - Condition and origin: - The generator set was only used for occasional purposes - It has only run for 500 hours of operation - A test run with load acceptance was done - The engine runs well and the generator generates 230 / 400 volts and 50 hertz - - - - - Scope of deliv ...
Type: David Dehairing And Flaming Machine Slaughter performance approx. 40-50 pigs/hour Pigs up to approx. 270 kg Machine body in hot-dip galvanized or stainless steel design Built-in control cabinet Roller equipped with 36 special clubs Electrical power: 5.5kW Installation dimensions of the machine in cm: Width: 240 Lenght: 340 Height: 250 Delivery time: after advanced payment, the machine is generally refurbished and ready for delivery
modernized machine with new LTG-StoreControl P control system Control expansion optionally possible Exterior Dimensions: Overall height 8,700 mm Overall width 3,500 mm Installation depth 1,580 mm 51 carriers with a payload of 350 kg each in clear usable dimensions: H = 255 mm W = 3,050 mm T = 520 mm Chain jump 305 mm 51 galvanized intermediate floors Total payload up to 19,000 kg Side table in 990 mm above OKFF with NiRo worktop, 315 mm deep Colour scheme grey Motor power drive 1 x 3.8 kW / 400 Volt subject to errors, technical changes, Surfaces cleaned, signs of wear and minor deformations possible Delivery & installation currently mainly in D, A and other neighboring countries
We offer LTG-TowerMax L 70.0-304-2448-816-7510 storage systems modernized by us with a completely new StoreControl L control system. currently 2 identical machines are available Exterior Dimensions: Height 7510 mm Overall width 2700 mm Overall depth 2820 mm Total payload machine up to 2 x 35,000 kg 55 carriers for up to 304 kg payload each in clear usable dimensions: W = 2448 mm T = 816 mm Usable height up to 60 to 750 mm Start of the operating opening at 950 mm above OKFF, then 915 mm high Engine power Vertical drive 5.2 kW / 400 Volt Horizontal drive 0.75 kW / 400 Volt Rocker motor 0.4 kW / 400 V Colour scheme grey/blue, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries
roll diameter: 400 mm roll length: 1000 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch 0 total power requirement: 45 kW Condition: used, overhauled Specification: Rolling mill 400 x 1000 mm - second-hand monobloc model, motor under the rolls - roll diameter: 400 mm - roll length: 1000 mm - rolls: with core bore, with central chamber for water cooling - Rollers mounted on bronze bushes with oil circulation lubrication via pump, - equipped with new slewing rings for connection to the water circuit - Gap adjustment: hydraulic, NEW - Hydraulic unit NEW - Tiltable guide plates - stainless steel roller container to hold the mixture - bi-directional rods - safety brake for NOT stop - AC motor: 45 kW - 400 Volt - 50 Hz - Painting: in RAL colours according to customer requirements - new control panel with touch pan ...
We offer an LTG-TowerMax L 70.0-150-2448-1071-5885 storage lift modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Height 5885 mm Overall width 2840 mm Installation depth 3500 mm Total payload machine up to 2 x 35,000 kg 60 carriers for up to 150 kg payload each in clear usable dimensions: W = 2448 mm T = 1071 mm Usable height up to 50 to 750 mm Start of the operating opening in 840 mm above OKFF, then 990 mm high Engine power Vertical drive 5.2 kW / 400 Volt Horizontal drive 0.75 kW / 400 Volt Rocker motor 0.4 kW / 400 V Colour scheme grey/grey, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries
We offer a paternoster LTG-TowerMax P 13.5-450-30-410-7935 with a completely new StoreControl P control system, which has been modernized by us Exterior Dimensions: Overall height 7,935 mm Overall width 3,501 mm Installation depth 1,820 mm 30 carriers with a payload of 450 kg each in clear usable dimensions: H = 410 mm W = 2,850 mm T = 628 mm Chain jump 457 mm 60 galvanized intermediate floors for 150 kg each Total payload up to 13,500 kg Side table in 1000 mm above OKFF with NiRo worktop, 400 mm deep Colour scheme grey Motor power drive 1 x 5.5 kW / 400 Volt subject to errors and technical changes, surfaces cleaned, signs of wear and minor deformations possible, Delivery & assembly currently mainly in D, A and other neighboring countries
We offer a LTG-TowerMax L 18.0-170-2448-816-7510 storage lift with a completely new StoreControl L control system, which we have modernized. Exterior Dimensions: Height 7510 mm Overall width 2760 mm Overall depth 2650 mm Total payload machine up to 2 x 9,000 kg 40 carriers for up to 170 kg payload each in clear usable dimensions: W = 2448 mm T = 816 mm Usable height up to 60 to 750 mm Start of the operating opening in 900 mm above OKFF, then 800 mm high, lift door manually operated, Engine power Vertical drive 3.0 kW / 400 Volt Horizontal drive 0.37 kW / 400 Volt Colour scheme grey/grey, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries
We offer a paternoster LTG-TowerMax P 13.5-450-30-410-7935 with a completely new StoreControl P control system, which has been modernized by us Exterior Dimensions: Overall height 7,935 mm Overall width 3,501 mm Installation depth 1,820 mm 30 carriers with a payload of 450 kg each in clear usable dimensions: H = 410 mm W = 2,850 mm T = 628 mm Chain jump 457 mm 60 galvanized intermediate floors for 150 kg each Total payload up to 13,500 kg Side table in 1000 mm above OKFF with NiRo worktop, 400 mm deep Colour scheme grey Motor power drive 1 x 5.5 kW / 400 Volt subject to errors and technical changes, surfaces cleaned, signs of wear and minor deformations possible, Delivery & assembly currently mainly in D, A and other neighboring countries
We offer an LTG-TowerMax L 18.0-250-1220-816-6010 storage lift with a completely new StoreControl L control system. Exterior Dimensions: Height 7510 mm Overall width 2760 mm Overall depth 2650 mm Total payload machine up to 2 x 9,000 kg 40 carriers for up to 170 kg payload each in clear usable dimensions: W = 2448 mm T = 816 mm Usable height up to 60 to 750 mm Start of the operating opening in 900 mm above OKFF, then 800 mm high, lift door manually operated, Engine power Vertical drive 3.0 kW / 400 Volt Horizontal drive 0.37 kW / 400 Volt Colour scheme grey/grey, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries
KKK Turbocharger Overhauled K44 UB19 W8286 Q6 Ausf Nr 5344 990 6001
We offer a paternoster LTG-TowerMax P 12.6-300-42-215-6080 with a completely new StoreControl P control system. currently 2 identical machines available, Exterior Dimensions: Height 6,080 mm Overall width 3,350 mm Installation depth 1,500 mm 42 carriers with a payload of 300 kg each in clear usable dimensions: H = 215 mm W = 2,650 mm T = 520 mm Chain jump 254 mm Total payload up to 12,600 kg 1000 mm side table above OKFF with NiRo worktop, 300 mm deep Colour scheme beige/beige Motor power drive 1 x 5.4 kW / 400 Volt subject to errors and technical changes, photo of an identical machine, surfaces cleaned, signs of wear and minor deformations possible, Delivery & assembly currently mainly in D, A and other neighboring countries
We offer an LTG-TowerMax L 70.0-331-2448-816-6210 storage system that we have modernized with a completely new StoreControl L control system. Exterior Dimensions: Overall height 6210 mm Overall width 2780 mm Installation depth 2908 mm Total payload machine up to 2 x 35,000 kg 50 carriers for up to 331 kg payload each in clear usable dimensions: W = 2448 mm T = 816 mm Usable height up to 50 to 750 mm Start of the operating opening in 870 mm above OKFF, then 990 mm high Engine power Vertical drive 5.2 kW / 400 Volt Horizontal drive 0.75 kW / 400 Volt Rocker motor 0.4 kW / 400 V Colour scheme grey/orange, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries
new
We offer LTG-TowerMax L 40.0-340-2448-816-8760 storage systems modernized by us with a completely new StoreControl L control system. currently 2 identical machines available Exterior Dimensions: Overall height 8760 mm Overall width 2778 mm Installation depth 2800 mm Total payload machine up to 2 x 20,000 kg 48 carriers for up to 340 kg payload each in clear usable dimensions: W = 2448 mm T = 816 mm Usable height up to 60 to 750 mm Start of the operating opening in 900 mm above OKFF, then 800 mm high, lift door manually operated, Engine power Vertical drive 3.0 kW / 400 Volt Horizontal drive 0.37 kW / 400 Volt Colour scheme grey/orange, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries
Styrofoam shredder MAXI XL 1400 x 560mm MAXI 1400 x 600mm JUMBO 1800 x 800mm Insertion opening: L x W Polystyrene shredder MAXI XL: 1400mm x 560mm Polystyrene shredder MAXI: 1400mm x 600mm Polystyrene shredder JUMBO : 800mm x 800mm Dimensions: L x W x H (dimensions without blower) Polystyrene shredder MAXI XL: 2.4m x 0.9m x 1.6m Polystyrene shredder MAXI: 1.9m x 0.8m x 1.8m Polystyrene shredder JUMBO: 2.4m x 1.1m x 1.8m Motor power/connection/power conveying fan: Pre-shredder / conveyor blower Polystyrene shredder MAXI XL: 5.5 kW | Blower 2.2 kW Polystyrene shredder MAXI: 6.2 kW (with built-in screw under the pre-crusher) | Blower 2.2 kW Polystyrene shredder JUMBO 11.2 kW (with built-in screw under the pre-crusher) Conveyor blower 5.5 kW Throughput (EPS) Polystyrene shredder MAXI XL: 8-10 m3/h Polystyrene shredder MAXI: 25-30 m3/h Styrofoam ...
We offer a paternoster LTG-TowerMax P 15.7-628-25-360-6010 with a completely new StoreControl P control system, which has been modernized by us Exterior Dimensions: Overall height 6,010 mm Overall width 3,501 mm Installation depth 1,820 mm 25 carriers with a payload of 300 kg each in clear usable dimensions: H = 360 mm W = 2,850 mm T = 628 mm Chain jump 406 mm 25 galvanized intermediate floors for 140 kg each Total payload up to 15,700 kg Side table in 1000 mm above OKFF with plastic worktop, 300 mm deep Colour scheme grey/grey Motor power drive 1 x 5.5 kW / 400 Volt subject to errors and technical changes, surfaces cleaned, signs of wear and minor deformations possible, Delivery & assembly currently mainly in D, A and other neighboring countries
maximum number of results exceeded
please refine your search
