129,275 used machines on RESALE, but how to find them? Machine Search
Bito MBD 43 Reusable Container Reusable container with hinged two-part hinged lid. Basic dimensions L x W 410 x 300 (mm) Height 199 mm Color: Orange Material: PP Volume 13 liters Content load 14 kg Up to 75% less empty volume due to stacking inside each other Stackable when closed Negotiation price: € 4,-- net from stock Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)
Bito MBD 64 Reusable Container Reusable container with hinged two-part hinged lid. Basic dimensions L x W 610 x 400 (mm) Height 199 mm Color: Orange Material: PP Volume 29 litres Content load 25 kg Up to 75% less empty volume due to stacking inside each other Stackable when closed Negotiation price: € 6,-- net from stock Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)
WEINIG high performance planer Type Hydromat 22 BL (full checked!) Built in 1995 With safety hood and soundproofing cabin! Machine specifications: - Planing capacity 220 x 120 mm - Feeding, 8- 80 m/min, motor 18.5 kW Spindle layout: Bottom-right-Links Top - bottom, table rigid Bottom, table rigid, spindle prepared Top - bottom, table rigid, spindle prepared gap unit, consisting of 1 right and 1 left spindle 30 kW each (4500 rpm) incl. table roll, sliding roller, spray indentation and wedge dissipation 4 Roller pull-out Special printing and fittings for the production of top layer slats Feed (divider) for slats and pull-out tape
Complete dairy - Plate heat exchanger / milk heater from API Schmidt boards automatic heating system including documentation and temperature recording - 3 x tank storage 1000 l. each with agitator (insulated) - CIP cleaning system 3 x stainless steel container (500 l.) with direct steam injection - Process tank 160 Ltr. Content
1 MCS hydraulic dyeing jigger type Maxi Jigger 3400, roller width 340 cm, working width 320 cm, maximal winding diameter 1400 mm, year 1989, maximal dyeing temperature 98 ºC, dye cycle controller TERMOELETTRONICA type JTronix JP70tc,
Monobloc filling and sealing machine incl. feeding turn table Filling range 5-30ml Container sizes D.20-35 - H.50-80mm Capacity max. 15-30 pcs. / min.
SCHENCK hydraulic power unit type PP250A B Used hydraulic power unit. Ready to connect and ready for use. Used for servo hydraulics Incl. comprehensive and serviced components (see pictures). Aggregate rental possible. Other power units and hydraulic components available on request (sale/rental). Nominal pressure 315 bar Nominal flow rate 250 l/min Tank capacity 1.3 m³ Year of manufacture 1996 All machines can be viewed in Kassel by arrangement. We would like to point out that the machines offered are used machines and not new machines! The sale of used goods is only to tradespeople within the meaning of § 14 BGB under exclusion of any warranty and return in the actual condition. Upon purchase, you will receive an invoice with VAT (19%). Pick-up in 34123 Kassel, free loaded with forklift. You are also welcome to have the machine picked up by a forwarding agent ...
1 x 'Forward Machinery Industrial Corp'. (Taiwan) 4 roll inverted L calender line, Year of manufacture: 2007, Roll dimensions: 34in (860mm) dia x 157in (4000mm) wide, Peripherally drilled (oil heating), Roller bearings, Motorised nip gap adjustment, Roll bending rolls 2 and 4, Cross axis roll 3, Independent drive to each roll:- Roll 1: 110kW, Roll 2: 150kW, Roll 3: 150kW, Roll 4: 110kW. Finished product width 3600mm. Pick off rollers, Matt finish embossing station, Edge trimming, 19 x cooling drums 355mm dia x 4000mm wide, Dual station surface winder. The line is already dismantled and ready for immediate shipment. There is also upstream equipment available by separate negotiation (high speed mixers, 2 x 100L Banbury, strainer, two roll mills etc).
: : : total power requirement: 0.75 kW weight of the machine ca.: 0.22 t required space: 0.6x0.8x1.45 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
McIntyre 150 Shear Designed as a low-cost answer to metal cleaning, an ordinary 13amp socket and suitable bench are all you need to put the 150 shear through its paces Versatile The McIntyre 150 Shear is ideal for all lighter metal shearing, but is powerful enough to tackle gun metal valves, bath taps, cable and other non-ferrous cleaning operations. The McIntyre 150 Shear is small enough to be moved easily around the yard and will be a versatile addition to any size of yard. Our company can provide it with short delivery time.
The machine is in good condition and was only used as a back-up machine for 10 years. It has been cleaned and extensively tested. so that it is immediately ready for use. The scale is calibratable. The conveyor belts are functional but no longer so beautiful. The display and computer were renewed in the last week of production. Type: S3 Rejection: Pusher Year of Make: 2006 Screen: X-Terminal HMI Dimensions: 1330 mm x 900 mm x 1700 mm. (L/W/H) Load cell: TF20 Capability characteristics: • Legal-for-trade design • Classification in up to 7 weight classes • 115/230 V~, 50/60 Hz, 1 phase, 500 VA • Automatic or manual zeroing • Various switchable program languages • 100 item storage • Flexible integration into production lines •Password S-Series Weighing Terminal: • Touchscreen color display, TFT 15 inches, • User-friendly: TachoControl, menu nav ...
MTU 8V396 TB 53 Heat Exchangers Charge Air Coolers Intercoolers 2930-12-334-9601 / 0010985920
MTU 8V396 TB 53 Heat Exchangers Charge Air Coolers Intercoolers 2930-12-334-9277 / 0052000675
MTU 12V396 SE 94 / TE 94 Exchangers Charge Air Coolers Intercoolers 2930-12-A07-0048 0030982820
MTU 16V4000 M 90 A BANK Heat Exchangers Charge Air Coolers Intercoolers 2930-12-378-7717 5260981120
bizhub C227 = Equipment number: 1823718979 – Color MFP Incl. DF-628 Original Feeder, DK-514x Base Cabinet bizhub C227 Communication center with 22 ppm in b/w and color, standard Emperon pressure controller with PCL6 (XL 3.0), PCL5c, PostScript 3, PDF 1.4, XPS and OOXML support, paper capacities of 2 x 500 Sheet and 100 sheets from stacking sheet feeder, formats from A6 to A3, grammages from 60–256 g/m2, 2 GB Storage, 320 GB hard drive and 1 GB Ethernet as standard OC-514 Original Cover Cover instead of an Original Feeder DF-628 Original Feeder Automatic document feeder for up to 100 originals, with duplex function PC-114 Universal Cartridge A5-A3, 1 x 500 sheets, 60-256 g/m2 PC-214 Universal Cartridge A5-A3, 2 x 500 sheets, 60-256 g/m2 PC-414 Large Capacity Cartridge A4, 2,500 sheets, 60-256 g/m2 DK-514 Base cabinet Storage space for paper supplies and cons ...
bizhub C3100P = Equipment number: 1823718649 – Colour printer without additional accessories bizhub C3100P A4 printer with 31 ppm B/W and color. Standard Emperon™ Pressure Controller PCL, PostScript and optional XPS support. Paper capacity of 250 sheets and 100-sheet stacking sheet feeder. Standard duplex unit. 1 GB memory and Gigabit Ethernet standard. PF-14 Paper tray A4; 500 sheets; up to 90 g/m2 SCD-25 Base cabinet storage space for consumables HD-P06 Hard Drive1 320 GB Hard Drive 1 GB memory expansion 1 GB memory expansion for faster processes ID Card Reader1 Various ID Card Technologies LK-106 Barcode Fonts1 Printing Barcode Fonts LK-107 Unicode Fonts1 Printing Unicode Fonts LK-108 OCR A and B Fonts1 Printing OCR (A and B) Fonts LK-111 ThinPrint® Client Native ThinPrint Client SX-BR-4600 Wireless LAN Wireless LAN to Network Connection EH-C591 Staple Unit Sta ...
MTU 16V4000 M 90 B BANK Heat Exchangers Charge Air Coolers Intercoolers 2930-12-378-7720 5260981120
MWM TCG 2020 V12/V16/V20 Heat Exchangers Charge Air Coolers Intercoolers Part Number 12452511
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Mathis THN 10988 Laboratory Thermosal Plant Use This foulard-dryer combination has proven itself excellently in practice. It is used in this way for a wide variety of hot air treatment processes such as drying, fixing, condensing, thermo-isolating, etc This system is used wherever a certain sample size is already required, for example to produce sample collections or the like. Dryer THA If the foulard and dryer are to be used separately in addition to continuous operation, the THA type dryer should be chosen. Attached to this device are a unwinding unit at the dryer entrance and a pull-out unit at its exit. This element determines the speed of goods in individual operations. This offers the advantage of using the foulard and dryer independently and at the same time. For drying, fixing, condensing, etc., the goods are then put on the dryer. If all the previously listed ap ...
A Linde E16L forklift truck with only 165 operating hours is being sold. The truck is fully functional and ready for immediate use. The forklift currently has a Kaup pallet turner installed. It can also be purchased without a turner. Specifications: Class 386 170 operating hours HF Onboard Charger 48V, 120 Ah 48 volts, 750 Ah battery Duplex Lift Mast: 3145/2121/1518mm Fork carriage 980mm wide, 6 castors Overhead Guard Comfort 2050mm Tyres Superelastik Lighting on the front and back Pallet reversible clamp brand Kaup Type: 1.5T 49lW with sideshift Width 970mm Isoclass 2 incl. solenoid valve 48Volt Opening/roller range 540 - 1,720mm
McIntyre 320 Shear The well established 320 Shear is a must for any yard and is now recognised as the industry standard for all shears of this type Powerful and high quality One of our most popular shears, the McIntyre 320 Shear has maintained dominance in a demanding market due to its strength, quality and reliability
McIntyre 407 Shear An affordable efficient 407mm (16") blade shear with enough power and speed to handle a wide variety of cutting tasks Robust, affordable, efficient Built originally for scrapyard use, the McIntyre 407 shear is robust enough to withstand the most difficult of working environments. It is now our most popular alligator shear with more than 2000 still in daily use worldwide. The McIntyre 407 is able to handle; automotive scrap, whole gear boxes, cylinder heads and blocks, oversized gate valves and of course all the usual non ferrous metal separations.
Y.O.M.: 1980 No.: 10027 Usable volume: 150 l Pressure double jacket: +1 bar Vacuum pump Pressure gauge, temp gauge Scraper agitator, three-way valve 3 intake ducts Lid to be opened via lifting pull Dimensions LWH: 1700 x 1000 x 2100 mm Weight: approx. 500 kg Products: e.g. mayonnaise, sauces, ketchup, cosmetics, creams etc.
MTU 8V396 TB 53 2930-12-334-9601 / 0010985920
MTU 8V396 TB 53 2930-12-334-9277 / 0052000675
MTU 16V4000 M 90 A BANK 2930-12-378-7717 5260981120
MTU 16V4000 M 90 B BANK 2930-12-378-7720 5260981120
Control type: CNC Sinumerik 840D-SL x-way 1135 mm y-way 1050 mm z-way 750 mm table size 1400 x 1050 mm Table load 2500 kg max. workpiece size LxWxH 1400 x 1240 x 750 mm Speed 10000 rpm feed speeds X/Y/Z Axis 40000 mm/min Expressspeeds x/y/z 40000 mm/min Tool holder HSK-A100 HSK Number of places in the tool magazine 30 places max. tool weight 20 kg max. tool length 395 mm max. tool diameter 110 mm Machine height 3294 mm Drive power - spindle motor 44 kW machine weight approx. 17.9 t Space requirements approx. 15 m2 Information: Universal milling machine in mono BLOCK design (3-axis) - available September 2019 - only 3800 spindle hours, 13400 power-on hours Equipment / Accessories: - Coolant system - High-pressure pump - Chip conveyor - Hand-held panel - BALLUFF option - Documentation
Stock# U2308-10 Used stainless steel (316) vertical basket centrifuge by Ametek/Tolhurst Centrifugals (USA) type Batch-Master model B-M with perforated bowl size 48" (1219,2 mm) diameter x 30" (762 mm) height. Machine is designed for periodical work with automated discharge of cake. Working rotation of bowl from 0 up to 1080 rpm. Top feeding, bottom discharge. Machine is mounted on carbon steel supporting frame. Bowl is driven by hydraulic device with power 30 kW, 1470 rpm, 380 V, 50 hz, design Ex. Included control panel and stainless steel conical chute.
This is a 115 LITER electric brazier MAGNUM 3/1 GN from the premium manufacturer MKN, type Optima 850. The Braisiere is a multifunctional device for steaming, boiling, pulling, braising and roasting. Emptying follows via a safety emptying tap at the front. The device has been tested in our in-house workshop and is fully functional. If desired, the device can be connected and demonstrated here. The price quoted is net plus 19% VAT. Our used equipment service for you: • 6 months warranty on all electrical parts •High-quality brand-name appliances at fair prices • Professional overhaul / inspection & expert cleaning • Tested & fully functional - or money back • Shipping or self-collection can be flexibly selected • Expert advice - before and after the purchase • Provision of operating instructions, connection diagrams & spare parts • Testing according to DGUV ...
McIntyre 500 GT Shear The 500 GT is designed for those needing just a bit more blade length without an equivalent increase in price Versatile The 500 GT gives customers just a bit more blade length without a big price increase. It is powerful enough to handle most non-ferrous cleaning and sizing operations, and can also be fitted with an optional bracket enabling it to double up as a catalytic converter shear.
McIntyre 600 HD Shear A fast and strong shear with an extended blade and hold down clamp, making it ideal for every cutting and cleaning task including car radiators Extended blade Built at the request of customers looking for a shear with a longer blade to handle larger items such as car radiators, the 600 HD offers more cutting area at less cost. The 600 HD will cut through radiators, for example, in one pass, speeding up processing and improving safety for the operator.
MECHANIC SYSTEM GM6VW industrial air filtration system was built in 2014 in Poland by Mechanic System Sp. z o.o. The machine is used in air filtration from dry impurities generated during various technological processes. Thanks to the use of patron filters with a large filtration area, the machine achieves an efficiency of up to 99.999% in class M, enabling recirculation of cleaned air back to the production hall. Dust accumulated on the surface of the patron filters is cleaned automatically by pulses of compressed air during machine operation. Moreover, the vertical positioning of the filters increases their vitality and significantly reduces operating costs. The MECHANIC SYSTEM GM 6VW dust collector has a fan installed directly on the filter chamber and is offered together with a controller and existing piping. Technical specifications of the MECHANIC SYSTEM GM6VW dust extraction un ...
The BTS-MF40 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 40 kg. The baling press impresses with its ease of use, safe operation, it is ideal for small material volume and producing compact and easy-to-handle bales. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 2 Ton Bale weight: up to 40 kg (material depending) Bale size: 600 H (var.) x 535 W x 460 D mm Machine size: 1756 H x 718 W x 644 D mm Machine weight: 187 kg Transport height: 1756 mm Loading aperture: 522 W x 490 H mm Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale trolley for easy ...
The BTS-MF60 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 60 kg. With a can crush insert baler is even suitable for crushing individual sheet metal and plastic containers and also cans. The baling press impresses with its ease of use, safe operation and its large filling volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 3.5 Ton Bale weight: up to 60 kg (material depending) Bale size: 800 H (var.) x 700 W x 500 D mm Machine size: 1996 H x 1040 W x 720 D mm Machine weight: 260 kg Transport height: 1996 mm Loading aperture: 700 W x 492 H mm Cycle times: 24 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise le ...
The Bio Mark 7 is the largest commercial cold press juicer we manufacture. It features a quick release hopper using two toggle latches, meaning the hopper chute can be removed in seconds and requires no gasket like other manufacturers. It has a Slim top body that still raises up to allow faster bag cleaning and a press only option. It also is our only juicer with a speed control option on the grinder allowing you to control the speed of the grinder. The Mark 7 is for serious cold press juice production and can easily upscale your juice production with simple controls and exceptional performance. apacity: 12 Kg per batch Output: 70 - 100 Litres per hour ( depending on recipe ) Power: Single Phase 240 Vac 50/60 Hz 3.75Kw 22.9 Amp IP66 Max Press Pressure: 3000 PSI Operating Press Pressure: 2200 PSI Motor Power: 5HP Hydraulic Rams: Two Weight: 400 Kg Dimensions: L: ...
McIntyre M20 Can / Metals Baler Protect the environment and generate income by baling aluminium and steel cans. Versatile The M20 Baler is not only a cost effective system for cans but can also be used for many other applications where automatic volume reduction or product destruction is required. The M20 Baler will accept cans up to 250mm x 480mm and will produce up to 500kg of 20g aluminium drink cans per hour. The smaller the size of the can, the greater the machine output. When fed with aluminium drinks cans, the M20 crushes and locks the material together to produce dense 274mm cubes, weighing approximately 9- 11kgs. Such dense bales means that no tying or strapping is needed. The cubes are simply ejected from the machine and ready for transportation. Optinally, you can buy it, with can sorter!
McIntyre 600 HD Shear A fast and strong shear with an extended blade and hold down clamp, making it ideal for every cutting and cleaning task including car radiators Extended blade Built at the request of customers looking for a shear with a longer blade to handle larger items such as car radiators, the 600 HD offers more cutting area at less cost. The 600 HD will cut through radiators, for example, in one pass, speeding up processing and improving safety for the operator.
Key data: 50 kg
Say-Mak SPH 50 - Pneumatic Forging Hammer - Welded steel structure - Regular beating with valve adjustment - Pneumatic working system with 2 pistons -Hour meter - All dies and Sal-Block replaceable, Sal-Block adjustable in 8 directions - Adjustable sal block for the operator's working angle - Simple and functional automatic lubrication system for front and rear pistons - Adjustable foot pedal depending on working height and foot protection cover - 360° adjustable flanged plunger and plexiglass cover - Incl. steel foundation Specifications - Operating mode: pneumatic - Drop weight: 50 kg - Lifting height: 185 mm - Motor power: 4 kW - Weight: 1000 kg - Dimensions WxHxD: 730 x 1450 x 1750 mm
McIntyre 640-240T Shear A beast of a machine, the 640-240T is strong, reliable and able to cut up to 88mm (3.5") mild steel High capacity Available as an electric or diesel version, the 640-240T is one of McIntyre’s most rugged pieces of equipment and offers more cutting capability than any other shear of its size. The 640-240T can be fitted with solenoid control allowing it to be coupled with infeed and out feed conveyors. Other options include; forced air cooling for hotter climates and an infeed table to facilitate the handling of sheets or long pieces of extrusion (as shown).
McIntyre 640-240T Shear A beast of a machine, the 640-240T is strong, reliable and able to cut up to 88mm (3.5") mild steel High capacity Available as an electric or diesel version, the 640-240T is one of McIntyre’s most rugged pieces of equipment and offers more cutting capability than any other shear of its size. The 640-240T can be fitted with solenoid control allowing it to be coupled with infeed and out feed conveyors. Other options include; forced air cooling for hotter climates and an infeed table to facilitate the handling of sheets or long pieces of extrusion (as shown).
Farrel Bridge BR Mixer (Lab BR Internal Mixer) Capacity of chamber 1.6 litre RPM 1420/960 730/350 HP 25/17/12.5/8.5 Motor 380 / 420 volts With Gearbox Cooling water / steam Complete with Control Panel
McIntyre 2035 Metals Baler An affordable metal baler, powerful enough to match the performance of much larger machines Strong, powerful, versatile Don't be deceived by the size of the McIntyre 2035 metal baler. A lid shear force of up to 22 tonnes and a platen force of up to 45 tonnes ensure that this machine has enough power to bale a whole range of non-ferrous metals. Heavy duty, four sided, reversible lid shearing blades make light work of oversized materials and in little more that 30 seconds, the 2035 will produce baled material to the size of 14" x 8" (355mm x 200mm)
McIntyre 5025SB Metals Baler An affordable metal baler, powerful enough to match the performance of much larger machines Strong and reliable In line with all JMC machines, the 5025SB has been designed and built to last. The first 5025SB was built over 20 years ago and is still in constant daily use. The 5025SB has cutting blades around all three sides of the box so can handle oversized material. It has a fast cycle time and would be a valuable asset to any metal recycling facility.
McIntyre Semi-automatic Terminator Metals Baler Designed to act as both a baler and a heavy duty yard shear, effectively combined to create one robust unit. New features The McIntyre Terminator combines all the best of McIntyre’s baler technology with several new features. Innovations include a sorting table which surrounds the front and sides of the bale box, acting both as an aid to loading and as a safety barrier between the operator and the lid. The Terminator also comes with a bale track which carries baled material away from the machine to an ideal height ready for unloading.
2 X DEUTZ MARINE ENGINES V12 816 626 HP@1800 RPM WITH TWINDISC MG5202 2.48:1
maximum number of results exceeded
please refine your search
