m 3063 used for sale

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying: from 2 sides each -Milling unit: swiveling -2x engines Perske -Power: 0.3 kW -Voltage: volts -Frequency: Hz -Speed: 18000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 520/470/H600 mm -Weight: 64 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying: from 2 sides each -Milling unit: swiveling -2x engines Perske -Power: 2.2 kW -Voltage: volts -Frequency: Hz -Speed: 17630 rpm -Other engines with other services in stock for an additional charge -Dimensions: 740/470/H600 mm -Weight: 82 kg

CNC control, operator panel, control console, operating unit, card slot, control cards, MC3 control, plug-in cards, circuit boards -Manufacturer: Krauss Maffei, MC3 control plug-in cards, circuit boards made from injection molding machine -Temperature controller card: Gossen Pantatherm DS 4 (3 pieces) -DC-DC Converter: Elba euro module PCD 54 CP on breadboard: Krauss Maffei AN 100 -Prop. Amplification: Bosch 0 811 405 015 / 0 811 405 002 / 0 811 405 099 -Plug-in card: Krauss Maffei SK201 -Individual components: see photos -Price/Sale: complete -Dimensions: 480/215/H270 mm -Weight: 4.8 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Frieseke & Hoepfner, hydraulic unit MKP R 14 / 9-1.6 -Motor: AEG 1.5 kW / 1400 rpm -Pressure: up to 450 bar -Delivery rate: 1.6 l / min -Individual components: see photos -Hydraulic tank: with level indicator -Dimensions: 1520/630 / H820 mm -Weight: 260 kg

Beam claw, sheet metal clamp, sheet metal claw, girder clamp, sheet metal gripper, material gripper, material gripper, section steel gripper, panel gripper, lifting claw, lifting clamp, support clamp, crane clamp -Manufacturer: Renfroe, sheet metal gripper lifting clamp type MPC2 -Clamping range: 30-60 mm -Load capacity: 2000 kg -Dimensions: 400/300/120 mm -Weight: 9.3 kg

Morse taper sleeve, tool holder, Morse taper, Morse taper, taper sleeve, adapter, drill chuck holder, drill chuck holder, taper mandrel, MT insert shank -Manufacturer: Albrecht, drill chuck holder -Hoffmann: Art.-No .: 342600 3/24 -Morse taper: MK3 -Drill chuck: B24 -Dimensions packaging: 165/30 / H30 mm -Weight: 0.5 kg

Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Mössner Rekord, vertical band saw type SM/420 with saw band welder -Cutting width: max. 400 mm -Cutting height: max. 230 mm -Motor power: 1.1/1.7 KW -Voltage: 380 volts, 50 Hz, 4.6/3.6 A -Band saw: length 3150 to 3260 mm -Band saw speed: adjustable -Work table: pivotable in 2 axes: -Band saw welder: Ideal BSO -Dimensions: 940/750/H1850 mm -Weight: 548kg

Drill, column drill, column drill, pillar drill, box column drill, tapping machine, tapping machine -Manufacturer: HIW Helmerding, drill press -Motor: 1.0/1.6kw -Speeds: 95 - 1050 rpm, 8 levels -Feed: 0.08/0.16/0.28 1/rev. -Table size: 500 x 400 mm, travel 685 mm -Spindle mount: MK3 -Spindle stroke: 180 mm -Projection: 280 mm -Dimensions: 1100/650/H2340 mm -Weight: 690 kg

Servo motor, electric motor, DC motor, stepper motor, stepper motor -Manufacturer: Oriental Motor, Vexta servomotor stepper motor from Tiromat 3000/430 vacuum packaging system -Type PH268-E1.6-A1 -Shaft: Ø 6 x 20 mm -Number: 3x stepper motors available -Price: per piece -Dimensions: 97/57/H57 mm -Weight: 0.2 kg/pc.

Gear motor, electric motor, three-phase motor, electric gear motor -Gear motor: from automatic cutting machine Bierrebi TA 103 -Manufacturer gearbox: Bonfiglioli type MVF 62/P -Speeds: approx. 90 rpm i= 1:15 -Manufacturer engine: Neri type FC71FE-4 -Power: 0.37 kW / 1350 rpm -Shaft: Ø 28 x 10 mm -Protection class: IP 54 -Dimensions: 490/140/H190 mm -Weight: 16.1 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Geared motor: from automatic cutting machine Bierrebi TA 103 -Manufacturer of gearbox: Bonfiglioli type MVF 49/P -Speed speeds: approx. 103 rpm i= 1:14 -Motor manufacturer: Electro Adda -Power: 0.18 kW / 1450 rpm -Design: B5 angle -Hollow shaft: Ø 25 x 80 mm -Protection class: IP 54 -Dimensions: 325/125/H175 mm -Weight: 7.9 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Gear motor: from automatic cutting machine Bierrebi TA 103 -Manufacturer gearbox: Bonfiglioli type MVF 62/P -Speeds: approx. 97 rpm i= 1:15 -Manufacturer engine: Electro Adda type FC 715 -Power: 0.37 kW / 1450 rpm -Shaft: Ø 30 x 15 mm -Protection class: IP 54 -Dimensions: 485/143/H190 mm -Weight: 19.7kg

Filter control valve, on-off valve, service unit, water separator, filter bowl, pneumatic filter, filter regulator, service unit combination -Manufacturer: Festo, maintenance unit with pressure sensor/switch, branching modules and filter -Pressure sensor: Type MS4-LFR-1/4-D6-ERM-AD1-AS -Pressure switch: type PEV-1/4-B-OD -Branch modules: Type MS4-FRM-1/4 -Individual components: see photos -Dimensions: 170/85/H220 mm -Weight: 1 kg

Filter control valve, on-off valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, service unit combination, filter control valve -Manufacturer: Festo, maintenance unit with filter and control valve orig -Type: LFR-1/8-D-MINI -Pressure: max. 16/12 bar -Number: 1x filter control valve available -Price per piece -Weight: 0,5 kg/pc.

Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: Bonfigliol, geared motor with brake -Transmission: Bonfiglioli type MVF 49/P -Speeds: 125 rpm i= 1:24 -Motor manufacturer: Siemens, with holding brake -Voltage: 170 V -Power: 0.59 kW / 3000 rpm -Construction: B3 angle -Shaft: Ø 18 x 18 mm on both sides -Protection class: IP 54 -Number: 2x gear motor available -Price per piece -Dimensions: 450/140/H185 mm -Weight: 15 kg/pc.

Precision air measuring mandrels/rings, air measuring device, measuring columns and measuring computers, pneumatic-electric measuring column, measuring device, manual measuring device -Manufacturer: Stotz, manual measuring device air measuring device -Probes/measuring accuracy: see photos -Individual components: see photos -Mains voltage: 3x400 VAC / 50 Hz -Compressed air: 3.0 bar -Total dimensions: 2800/800/H2450 mm -Total weight: 702 kg

Tobacco cutting machine -Sold/handed over: in its current condition as seen -Prototype: Machine is not operational -Manufacturer: Sagemüller, tobacco cutting machine with knife sharpening device -Cutting blades: 8 pcs. length 400 mm, 2 pcs. die 850/120/H275 mm -Individual components: see photos -Machine dimensions: 1900/1340/H1810 mm Total weight: 1935 kg

Grinding machine, angle grinder, for chipper knives, planer knives, saw blade grinder, lathe grinder, milling cutter grinder, surface grinder, drill grinder, bench grinder -Manufacturer: Chuet Nevers, tool grinding machine -Speed: 3000 rpm -Grinding wheels: Ø max. 200 mm -Accessories: included, see photos -Dimensions: 680/590/H1560 mm -Weight: approx. 121 kg

Filter control valve, on-off valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, service unit combination, filter control valve -Handover: in the current condition as seen -Maintenance unit: incomplete, see photos -Manufacturer: Festo, maintenance unit from CNC machining center Santenberg GTC S 2 -Type: D-MIDI BD43 BO43 Individual components see photos -Pressure: max. 16/12 bar -Dimension: 530/105/H270 mm -Weight: 4.9 kg

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, analog input module, sensor/actuator module, connection, electronic module, PLC module, expansion module, plug-in card circuit board, operator panel -Manufacturer: Fanuc, plug-in card circuit board from CNC machining center Santenberg GTC S 2 -Type: A20B-2002-052 MES-1A -Extension module: Type: A03B-0815-C001 4 pcs. -Dimensions: 150/110/H30 mm -Weight: 0.2 kg

Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, switch disconnectors, disconnectors -Manufacturer: Moeller, motor protection switch -Type: PKZM4-58 -Number: 2x switches available -Price per piece -Dimensions: 140/55/H165 mm -Weight: 1.1 kg/pc.

Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, switch disconnectors, disconnectors -Manufacturer: Moeller, motor protection switch -Type: PKZMO-25 -Number: 1x switches available -Price per piece -Dimensions: 90/45/H75 mm -Weight: 0,3 kg/pc.

Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, switch disconnectors, disconnectors -Manufacturer: Moeller, motor protection switch -Type: PKZMO-1 -Number: 1x switches available -Price per piece -Dimensions: 90/45/H75 mm -Weight: 0,3 kg/pc.

Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, switch disconnectors, disconnectors -Manufacturer: Moeller, motor protection switch -Type: PKZMO-0,63 -Number: 2x switches available -Price per piece -Dimensions: 90/45/H75 mm -Weight: 0,3 kg/pc.

Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, switch disconnectors, disconnectors -Manufacturer: Moeller, motor protection switch -Type: PKZMO-10 -Number: 2x switches available -Price per piece -Dimensions: 90/45/H75 mm -Weight: 0,3 kg/pc.

Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, switch disconnectors, disconnectors -Manufacturer: Moeller, motor protection switch -Type: PKZMO-6,3 -Number: 1x switches available -Price per piece -Dimensions: 90/45/H75 mm -Weight: 0,3 kg/pc.

Main spindle with drive motor, universal milling head, milling holder, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron WF 51C/155 -Motor: AEG 380V 8 kW 1400/2850 rpm -Dimensions: see photos / technical. drawing -Dimensions: 1700/580/H700 mm -Weight: approx. 525 kg

Permanent magnet motor, electric motor, servo motor, geared motor, three-phase motor -Manufacturer: Siemens, Permanent Magnet Motor from CNC milling machine Mikron WF 51C/155 -Type: HU3074-,0AC01-Z -Voltage: 167 V -Power: 1.8 kW -Speed: 2000 rpm -Shaft: Ø 22 x 45 mm -Number: 2x motors available -Price: per piece -Dimensions: 390/140/H185 mm -Weight: 23 kg/pc.

Solenoid coil, stop magnet, pull magnet, opening magnet, stop magnet, locking unit, solenoid valve coil -Manufacturer: Parker, solenoid valve coil Solenoid coil unused -Type: AK-D3W-S-SW-30-610 MSM-H1 -Voltage: 48VDC -Number: 5x magnetic coil available -Price per piece -Dimension: 90/62/H72 mm -Weight: 1.0 kg

Motor protection relay, relay, heating current monitoring, preheating for generators, contactor, semiconductor contactor, contactor, motor protection, monitoring relay, thermistor -Manufacturer: Schiele, motor protection relay MSS mecotron 1 C/O unused original packaging -Item no.: 2.430.801.11 -Voltage: 220- 240V AC -Number: 2x relay available -Price per piece -Dimensions packaging: 100/80/H25 mm -Weight: 0.2 kg

gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: Motovario, gear motor type NHRV/ 030 -Speed speeds: approx. 68 rpm i= 20 -Engine manufacturer: DRdrives Type 63A-4 -Power: 0.12 kW / 1360 rpm -Hollow shaft: Ø 14 x 60 mm -Number: 2x gear motor available -Price: per piece -Dimensions: 288/155/H125 mm -Weight: 5.3 kg/piece

Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: Motovario, gear motor type NHRV/ 040 -Speeds: approx. 183 rpm i= 7.5 -Manufacturer motor: DRdrives type 71C-4 -Power: 0.55 kW / 1375 rpm -Hollow shaft: Ø 18 x 80 mm -Number: 2x gear motor available -Price: per piece -Dimensions: 340/175/H155 mm -Weight: 9.2 kg/pc.

Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: STM, geared motor type RMI 50 D -Speed speeds: approx. 13 rpm i= 1/100 -Manufacturer engine: Carpanelli type M63C4 -Power: 0.25 kW / 1340 rpm -Hollow shaft: Ø 24 x 100 mm -Quantity: 4x geared motor available -Price: per piece -Dimensions: 210/140/H350 mm -Weight: 8.7 kg/pc.

Strapping machine, packaging machine, strapping machine, skin pack machine, pallet wrapper, geared motor with reel -Manufacturer: Nord, gear motor with reel from packaging machine Tiromat Compact M420 -Transmission: Nord 1 S32F F i= 5.40 -Motor: Nord SK1S32F 0-750 rpm / 0-139 rpm -Number: 2x reel unit available / 1x left 1x right -price: per piece -Total dimensions: 520/460/H360 mm each -Weight: 19 kg/pc.

Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: MAZ, gear motor with brake -Transmission: Type 80 SD S1 i= 41 / 1 -Speed: 16.3 rpm -Motor: Type B80S/8 K4 0.25 kW / 670 rpm -Shaft: Ø 20 x 40 mm -Protection class: P54 -Brake: 4 Nm -Dimensions: 460/210/H225 mm -Weight: 22 kg

CNC control, control cards, MC3 control, plug-in cards, printed circuit boards, electronics housing -Manufacturer: Krauss Maffei, control module from injection molding machine -Electronic module: HU 100 5089750 3AO63 -Electronic housing: phoenix contact type UEGM -Number: 14x module available -Dimensions: 90/25/H85 mm -Weight: 0.1 kg/pc.

Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: SITI SAT Antriebstechnik, Type MNHL 20/2-2743-MS -Speed speeds: approx. 51 rpm i= 27.4 -Power: 0.37 kW / 1400 rpm -Protection class: IP55 -Hollow shaft: Ø 20 mm -Wave height: 80 mm -Hole pattern: 50 x 110 mm -Dimensions: 430/195/H150 mm -Weight: 10.1 kg

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card, distribution board card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Bachmann, control electronic modules from injection molding machine Demag D 100-275 NC -Card holder: Murrelektronik 630055 -Control card: Philips 9404 780 020 -Individual components: see photos -Price/sale: complete -Total dimensions: 315/140/H215 mm -Weight: 1.4 kg

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card, distribution board card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Mannesmann Demag, control electronic modules from injection molding machine D 100-275 NC -Card holder: Murrelektronik 630055 -Control card: Philips 9404 780 020 -Individual components: see photos -Price/sale: complete -Total dimensions: 315/140/H215 mm -Weight: 1.4 kg

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor, Permanent Magnet Main Drive Motor, DC Motor, Asynchronous Main Drive Motor, Spindle Motor -Manufacturer: Indramat, servo motor from cycle lathe DMT CD320 -Type: MACO71C-0-US-2-C/095-A-/S001 -Part No.: 228353 -Speed: 2000 rpm -Shaft: Ø 19 x 37 mm -Dimensions: 390/115/H170 mm -Weight: 11.9 kg

Crosscut and miter saw, pull saw, crosscut saw, panel saw, crosscut and miter saw, radial saw, radial arm saw -Manufacturer: Elu, cross-cut and miter saw with table on solid base, mobile -Type: MGS 72 -Motor power: 0.85/1.2 kW -Speed: 1050/2100 rpm -Saw blade: Ø 305 mm -Cutting height: max.110 mm -Cutting width: max. 120 mm -Miter. 45° on both sides -Dimensions: 2100/840/H1180 mm -Total weight: 190 kg

Motor protection relay, relay, heating current monitoring, preheating for generators, contactor, semiconductor contactor, contactor, motor protection, monitoring relay, thermistor -Manufacturer: Schiele, motor protection relay MSS mecotron 2 C/O unused in original packaging -Article number: 2.430.810.93 -Voltage: max. 250 V / A1/A2: AC/DC 24V -Quantity: 17x relays available -Price per piece -Dimensions packaging: 80/25/H100 mm -Weight: 0.1 kg/pc.

Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type KAF37 DRS71S4BE05HR/MM03/AMA6 i = 106.38 -Drive motor: with frequency converter MM03D-503-00 -Speed: 13 - 2.6 rpm -Power: 0.37/0.075 kW -Hollow shaft: Ø 30 x 120 mm -Protection rating: IP54 -Quantity: 2x geared motor available -Price per piece -Dimensions: 490/290/H190 mm -Weight: 26 kg/pc.

Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type KAF37 DRS71S4BE05HR/MM03/AMA6 i = 44.46 -Drive motor: with frequency converter MM03D-503-00 -Speed: 31 - 6.3 rpm -Power: 0.37/0.075 kW -Shaft: Ø 25 x 50 mm on both sides -Protection rating: IP54 -Quantity: 1x geared motor available -Price per piece -Dimensions: 470/290/H210 mm -Weight: 26kg

Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: STM, geared motor type RMI 50 D -Speed speeds: approx. 14 rpm i= 1/100 -Manufacturer engine: TeKell type M63B4 -Power: 0.187 kW / 1390 rpm -Hollow shaft: Ø 24 x 100 mm -Quantity: 2x geared motor available -Price per piece -Dimensions: 200/140/H355 mm -Weight: 8.2 kg/pc.

gear motor, electric motor, electric gear motor -Manufacturer: Affeldt, gear motor type 1S32VF-71S/4MKK -Speed: 151 rpm i= 9.25 -Power: 0.25 kW -Shaft: Ø 14 x 30 mm -Design: B5 angle -Protection class: IP 55 -Number: 1x engine available -Dimensions: 310/210/H140 mm -Weight: 7.8 kg

gear motor, electric motor, electric gear motor -Manufacturer: CEG, gear motor -Speed: approx. 100 rpm -Engine: CEG Type MM63B4-STDT -Power: 0.22 kW / 1200 rpm -Hollow shaft: Ø 18 x 65 mm -Design: B14 angle -Protection class: IP 55 -Number: 3x engines available -Price: per piece -Dimensions: 320/170/H170 mm -Weight: 7.1 kg/piece

Measuring machine, coordinate measuring machine, thread measuring machine, Master Scanner -Manufacturer: IAC, measuring machine Master Scanner -Type: MSXP 60x25 -without controls -Accessories: including calibration and measuring accessories / technical documentation, see photos -Transport dimensions: 900/400/H700 mm -Total weight: 159 kg

Angle measuring device, encoder, rotary encoder, absolute rotary encoder -Manufacturer: Heidenhain, angle measuring device with integrated bearing, original packaging -Type: RCN 619.5GS5-19B00 ID No.: 249 003-19 -Quantity: 1x measuring device available Price: per piece -Cardboard dimensions: 180/140/H90 mm -Weight: 1.0 kg

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Merkle, TIG welding machine water-cooled, with transport trolley -Type: TIG 240 DC -Welding power: max. 240 A -Cooling: Merkle WK 230 water circulation cooler -Accessories: incl. ground cable, hose package see photos -Dimensions: 970/560/H1085 mm -Total weight: 99 kg