129,512 used machines on RESALE, but how to find them? Machine Search
Mazatrol Matrix Control Travel: X-axis: 560 mm Y-axis: 640 mm Z-axis: 640 mm 2 pallets 400 x 400 mm Milling spindle with increased torque Spindle motor 30 kW Max. spindle speed 18,000 rpm NC rotary table, 360,000 positions Tool changer with 80 stations SK-40 Tool Holder Tool length measurement Preparation of the Renishaw Infrared Measuring System, OMP60 Conveyor 15 bar high pressure pump CE mark
Machine for punching and sharpening belts at the same time
Key data: 500 mm, 8 mm, 6 kW
Martin T54 Surface Planer, with Tersa Z-4 and Hydraulic Table Lift Brand: Martin Type: T54 Year of Make: 1997 M. No.: V240171 Motor power: 5.5 kW Knife shaft: 5,000 tpm Z-4 Tersa Solid Steel Shaft ø125 mm Planing width: 5 Spahn removal: 8 mm Table length: 2,850 mm Task - table length: 1,640 mm Acceptance - table length: 1,200 mm Table height: 855 mm Dressing fence: 45° tiltable with Dun planing bar and width adjustment on lineair guides Weight: 1,200 KG Option: SuvaMatic protection device Condition: Full-function tested
Key data: 500 mm, 1640 mm, 4 St.
Martin T52 Surface Planer Brand Martin Type T52 Year of manufacture 1987 M. Nr V 151674 Motor power 5.5 kW (7.5 hp) Knife shaft speed 5000 rpm Knife shaft Z-4 Circle ø125 mm Planing width 500 mm Blade length 510 mm Spahn removal 8 mm foot pedal adjustment with display at table level Table length 2840 mm Task - Table length 1640 mm Acceptance - table length 1200 mm Table height 800 mm Dressing tank 1,100165mm Tilt 45° Weight approx. 950 KG Condition: Function tested
Key data: 500 mm, 1640 mm, 4 St.
Martin T52 Surface Planer Brand Martin Type T52 Year of manufacture: 1986 M. No V144098 Motor power 5.5 kW (7.5 hp) Knife shaft speed 5000 rpm Knife shaft Z-4 Tersa Circle ø125 mm Planing width 500 mm Blade length 510 mm Spahnabnahme Praxis 16 mm foot pedal adjustment with display at table level, limited to 8 mm for safety. Table length 2840 mm Task - Table length 1640 mm Acceptance - table length 1200 mm Table height 800 mm Dressing tank 1,100165mm Stop tilt 45° Weight approx. 950 KG Condition: Function tested
Max. X-axis stroke730 mm Max. Y-axis stroke730 mm Max. Z-axis stroke880 mm Max. workpiece diameter800 mm Max. workpiece height1,000 mm Max. workpiece weight700 kg Control & software SIEMENS
max. format 76 x 120 cm Year of manufacture 2005 Pallet feeder with suction head MC Control 4 fold pockets in the parallel fold section Downstream knife shaft 2 folding swords in the crossfold section 1 more fold pocket after the 1st cross break Standing arch delivery Desta Price on request. We supply and install worldwide.
Control Okuma OSP-P300 SA Rotary diameter. [mm] 650 Turning length [mm] 1000 Main spindle: Motor spindle technology Speed 4,200 rpm Power 22 kW Torque 427 Nm Spindle bore 91 mm Hollow clamping cylinder 86 mm C-Axis High Accuracy Package Chuck SMW KNCS-N 275-86 K8 Sub-spindle: Motor spindle technology Speed 5,000 rpm Power 22 kW Torque 420 Nm Spindle bore 80 mm Hollow clamping cylinder 77 mm C-Axis High Accuracy Package Chuck SMW BHD-FC 210-52-3 Tool carrier X/Y/Z/B: Milling spindle technology Speed 12,000 rpm Power 22 kW Torque 120 Nm Tool holder HSK 63 Y-axis 250 mm (+/- 125 mm) B-axis 240° Tool magazine: Number of stations 80 Equipment / Accessories: Displacement measuring systems directly in X/Y/Z axis (glass scales) Chip disposal chip conveyor Coolant supply IKZ system, 70 bar Coolant temperature control Deltatherm E4 Chip flushing work area ...
Jeremy Minimax Uno skin pass pass machine, built in 2018 - Manufacturer: Jeremy - Model: Minimax Uno - for 60cm wide trays - Hopper capacity approx. 40 litres - Skin pass machine with 2 attachments and accessory trolley - made of stainless steel Specifications: - Year of construction: 2018 - Power: 3.2 kW - Current: 16 A - Voltage 230 / 400 V - Frequency 50 Hz More pictures and information on request
Mobile Articulated Measuring Arm Measuring Machine Gauge Manufacturer: Zett Mess Type: AMPG 2400 Precision Year of Make: 2010 Measuring Ø: 2,400 mm
The machine is in good technical condition, a test run is possible by prior arrangement. Accessories included.
The machine is in good technical condition, a test run is possible by prior arrangement. Machine (incl. chip conveyor): 290 x 235 cm, weight: 3500–4000 kg Transformer station: 65 x 60 cm, weight: 150 kg Max. turning length: 81.3 mm Max. turning diameter: 99.1 mm CNC control: Fanuc 21iT X-axis: 300 mm Z-axis: 240 mm Spindle holder: A2-6 Spindle bore: 33 mm Number of tools in the turret: 8 Number of driven tools: 10 Spindle speed: up to 4000 rpm Spindle motor power: 11 kW Tailstock: No Bar Feeder: No Dimensions (L x W x H): 2600 × 2300 × 2400 mm Weight: 3900 kg
Hydraulic hub motor Bosch Rexroth MCR5H470ZZ33B4M2WL12P1 Type: MCR5H470ZZ33B4M2WL12P1 Weight - 44 Availability: 2pcs price per piece Tags: MNR:R921811684 SN:2084083 FD:13W51
Axle with hydraulic motors Rexroth MNR R921811314 Hydraulic hub motor Rexroth 2pcs Model Rexroth MNR:R921811314 CNR:- TYP: MCR5F470F180Z32B4M2WL 12SP SN:1938362 FD:12W40 7481 Ncjbmy Ex Iov Ea I Tspou Made in the United Kingdom Shipping weight: 221 kg
Hydraulic motor PMH MCF55 Nobmjv D Hwrey Ex Ipecu Displacement cc/rev 55 Max output speed rpm 4,300 Max pressure bar: 500 The max output torque: Nm 350 Weight: 25 kg Manufacturer: PMP Industries Part Number: MCL.5502.1 Serial Number: PP0377490 Customer Code / Model: PMH MCF55 Country of Manufacture: Italy 1 piece in stock
Turret milling machine DYNAMILL B-4V - capacity 900x380x600 mm, Digital read-out system, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 1270x254 mm, Longitudinal travel x axis: 900 mm, Cross travel y axis: 380 mm, Vertical travel z axis: 406 mm, Spindle taper: 40 ISO, Spindle speed: 40- 3800 rpm, Number of spindle speeds: Stepless, Spindle motor power: 3,7 Kw, Quill spindle travel: 127mm, Number of working feeds: stepless by DC motor, Weight: 2.000 Kg, Accessories: DRO, coolant.
Universal cylindrical grinding machne TACCHELLA ELEKTRA-Evo 1018 MPC - FANUC 21i MPC, Information about technical data are not binding., Machine available subject to prior sale., Height centres: 180 mm, Distance between centres: 1000 mm, Wheel dimension: 508x80x203,2 mm, Wheel speed: 2000 rpm - Variable and programmable, Spindle motor power: 8,2 Kw, Internal grinding spindle speed: 30.000 rpm, Weight: 6.500Kg
Band Sawing Machine MEP SHARK 281, Information about technical data are not binding., Machine available subject to prior sale., Max cutting capacity Ã: 250 mm, Max cutting capacity: 280x200 mm, Blade dimension: 2950x27x0,9 mm, Band speed range: 36 - 72 m/1, Blade motor power: 1,5 - 1,8 Kw, Working plane height: 950 mm, Weight: 370 Kg
Copper plate for lapping machine. Dia 600mm, NEW, make: Melchiorre, Mimu Machine Tools Gussago BS Italy, Lapping is a machining process in which two surfaces are rubbed together with an abrasive between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called grinding), involves rubbing a brittle material such as glass against a surface such as iron or glass itself (also known as the lap or grinding tool) with an abrasive such as aluminum oxide, jewellers rouge, opticians rouge, emery, silicon carbide, diamond, etc., between them. This produces microscopic conchoidal fractures as the abrasive rolls about between the two surfaces and removes material from both., The other form of lapping involves a softer material such as pitch or a ceramic for the lap, which is charged with the abrasive. The lap is then used to cut a harder mate ...
Ø min/max to be rectified: 3 - 300 mm, Dimensions of the work wheel: Ø610xØ304.8x508 mm, Dimensions of the drive wheel: Ø355xØ152.4x508 mm, Weight: 17000 kg, Power: 100 kW
Pasta machine WLS, Type Pressquick PQ 6-SU, Capacity approx. 50 kg/h, Capacity of the trough 12 kg, 2.2 kW press cylinder with continuous water cooling., DIOSNA S 120 2G dough kneading machine, 100 drying baskets, JUWEL TS 120 drying cabinet, for pasta 200 - 400 kg in 12-36 hours, 8 drying programs, System was not in operation, Year of manufacture 2021
Grinding wheel dimensions: Ø300 x Ø50 x 127 mm, Height to be rectified: 400 mm, Surface to be rectified: 1050 x 300 mm, Grinding head motor power: 5 CV, Total power: 8 CV, Weight approx.: 3700 Kg, Dimensions: 3050 x 1600 x 2350 mm
Marel concept 500 labelling machine, - top and bottom labelling machine
Mettler Toledo labelling equipment., More information soon.
Mettler Toledo PAS 3012 check-weigher with labeling machine., The labeling had can be electrically moved in all directions for an accurate positioning of the labels., - Max. weight: 6KG, - Min. weight: 0.020KG, - E: 0,001KG, - Rated for 70 packs per minute
Yamato multihead weigher ADW714 SWH Delivered with In-feed funnel that can be adjusted for many types of products. A much more recent RCU810-A coloured control panel. We’ve upgraded to this system compared to the old RCU600. New stainless steel parts, all dimple plated suitable for a lot of products. This prevents product from sticking. A very high-end machine that is in perfect working condition. Ready for immediate production. Because of 14 large heads this machine is capable of processing large products and fast production. Capable of reaching 90 weighings per minute (depending on set-up and product). Weighing range per portion from 20-3000 gram. Able of doing a multi-dump to go even higher than 3000 gram per portion. Have a look at the video below for a quick impression of the machine. For more specific information contact us. We are very experienced with Yamato multihead weighers.
VERTICAL MIXER, 10 m3 capacity, total height approx 5.400 mm including transmission group, max Ø 2.300 mm., constructed in painted electro-welded carbon steel., inner auger diam.350 mm. lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve at 2.500 mm from ground, max electric level indicator, paddle type, automatic greasing kit, 11 kw drive, complete with control panel., electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance and instruction manual, Possible additions: horizontal loading screw and hopper + cyclone on top + collector with dust sleeves piping + bag holding structure+bag weighing station + PLC fo ...
VERTICAL MIXER, 5.000 lt.capacity Total height approx 5.000 mm Max diam. 1,850 mm. Constructed in painted electro- welded carbon steel. Inner auger diam.280 mm. Loading hopper with safety grid and sampling shutter, 600 x 500 mm. Pulley and belt transmission, protected by carters Inspection door with safety limits, Cleaning hinged door on bottom of cone for complete discharging, with safety opening Side discharging pipe to big bag with valve at 1.000 mm from ground Bottom discharging pipe propeller type max level indicator automatic greasing kit 7,5 kw electric motor Complete with control panel. Electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V CE compliance and instruction manual, installed power - used power in work: about 60-65% : 7.5, capacity: 5.000 lt.
3,0 m3 capacity Total height approx 4.000 mm Max diam. 1.600 mm. Constructed in painted electro- welded carbon steel. Inner auger diam.280 mm. Loading hopper with safety grid and sampling shutter, 900 x 740 h 830 Pulley and belt transmission, protected by carters Inspection door with safety limits, Cleaning hinged door on bottom of cone for complete discharging, with safety opening Side discharging pipe to big bag with valve at 1.000 mm from ground Bottom discharging pipe propeller type max level indicator automatic greasing kit 5,5 kw electric motor Complete with control panel. Electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V CE compliance and instruction manual, installed power - used power in work: about 60-65% : 5.5, capacity: 3.000 lt.
VERTICAL MIXER, 8 m3 capacity, total height approx 4.500 mm including transmission group, max Ø 2.200 mm., constructed in painted electro-welded carbon steel., inner auger diam.350 mm. lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve at 2.500 mm from ground, max electric level indicator, paddle type, automatic greasing kit, 11 kw drive, complete with control panel., electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance and instruction manual, installed power - used power in work: about 60-65% : 11
CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 30.000 lt. (or bespoke) vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 7.750 mm including transmission group, max diam. 3.000 mm.(exceptional transport), constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, bottom discharging pipe on the other mixershopper with pneumatic valves, side discharging pipe to big bag with valve mm.at 2.700 mm from ground with pneumatic valves, electric min/max level indicator, paddle type, N.1 loading hopper with conveying screw ...
CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 30.000 lt. (or bespoke) vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 9.500 mm including transmission group, max diam. 2400 mm.(standard transport) - 2 x LKW for the whole system, constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, loading hopper with conveying screw, bottom discharging on the other mixer, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, electric level indicator, paddle type, electric motor 22 kw, complete with cont ...
Our VERTICAL MIXER 5 to 30 m3 are used to blend different batches of one material and grant a more homogeneous quality within one lot., Please see our attached [PDF](drive.google/file/d/1kQKOuxvrbrpfSZBrVxh2jrXbJ7StrQMp/view?usp=d rive_link) and photos for different sizes availables., Another important task they are used for, is to complete cooling of materials after a heat related process, like regranulation or agglomeration, in order to avoid the possibility that materials, due to residual heat, clog into lumps., Our standard mixers for plastic materials are constructed in sturdy electro-welded steel, painted on the outer surface with an anti-rust layer and a protection coating. Installed in a sheltered, dry place they will perform at their best for years ., - inner auger diam.350 mm., - lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600 x ...
Bundle offer Markforged 3D printer, consisting of 1 Onyx One 3D printer and 1 Mark Two 3D printer from Markforged in good condition considering its age, with the following accessories:, Equipment:, - 2 pieces of onyx material (2024), unopened, - 5 pcs. glass fiber endless material, (2017), unopened, - 2 dry boxes for material storage, Runtimes/number of print jobs:, - Onyx One: 4980h / 779 print jobs, - Mark Two: 6640h / 750 print jobs, resolution (z): 100µm - 200µm, nozzle diameter : FFF nozzle 0.4mm, CFF nozzle 0.9mm, extruder units: Double quick-change extruder, Printing break + restart possible: Yes, build platform: Kinematic coupling; Repeated positioning accuracy 0.01 mm, network connection: WiFi, Ethernet, USB, Dimensions in mm (w x h x d): 575mm x 322mm x 366mm, mass: about 30 kg, Electrical connection / consumption: 200-240 VAC, 50 Hz 100-127 VAC, 50/60 Hz, certification: ...
On behalf of a customer, we are offering an HP4200 MultiJetFusion 3D printer system with a post-processing station and build units. The device comes from a medium-sized company and is in good, used condition. The maintenance contract (3DaaS) was active until 2024., - Number of print jobs: < 1000, Scope of delivery:, - 1 x HP4200 MJF 3D printer, - 1 HP Processing Station, - 2 pcs. Build Units, - various spare parts such as filters etc., Optional services performed by certified HP technicians:, - Professional disassembly and packaging. Delivery in an original HP box (packaging not included, deposit required)., - Installation and commissioning, - Instruction in operation, operation, and aftercare (in English). Duration: 3-5 days, depending on the desired scope, printing technology: HP Multi Jet Fusion Technology, Installation space in mm (x/y/z): 380 x 284 x 380 mm (15 x 11.2 x 15 inches), ...
grinding length: 600 mm grinding width: 300 mm magnetic clamping plate: 600x250 mm wheel diameter: 220-300 mm weight: 2200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Mazak VTC-41 L X: 1660 - Y: 410 - Z: 510 mm CNC X-axis: 1660 mm Y-axis: 410 mm Z-axis: 510 mm Table dimensions: 2000 x 410 mm Max weight on the table: 800 kg Depth of throat (uprights-spindlecenter): 460 mm Admission in spindle (ISO): ISO 40 Power on the spindle: 11/7,5/5,5 kW Drilling-capacity: max dia 25 mm Tapping-capacity: max M24 Control : Mazatrol Number of axes: 3 axes Toolchanger: yes Number of rotations: 7000 rpm Length: 3900 mm Depth: 3050 mm Height: 2700 mm Weight: 6 ton
MITSUI SEIKI HR6A CNC machining center was built in 1984 in Japan by MITSUI SEIKI KOGYO CO., LTD. The machine is designed for precision milling, threading and boring of oversized workpieces with a maximum weight of 2 tonnes. All these machining processes are performed fully automatically, thanks to the use of an automatic pallet exchange system. This system allows workpieces to be loaded and unloaded simultaneously during machining, thus increasing production efficiency and significantly reducing machine downtime. The pallets are transported by a stable cast iron saddle on bed’s hardened and ground guideways. Movement of the X,Y,Z axes is performed on hardened and ground slideways. These ensure that the geometry of the axes remains constant, even when moving to end of their travels. All moving components, in turn, have Turcite B coated bearings, which ensure low friction and high vi ...
GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic HandwheelSoftware option - DXF ImportSoftware Option - DXF Import Possibility to open DXF files directly on the controller in order to extract contour and import it to the program.
Capaciteit slang: max. 2 inch / 50 mm De slang wordt via een rupsbandsysteem in de machine gevoerd en aangestuurd door een elektromotor De invoersnelheid is instelbaar van 0 tot 40 m/min De afstand tussen de banden op het rupsbandensysteem wordt handmatig ingesteld met een handwiel dat is uitgerust met een digitale teller Capaciteit: 500 programma#39;s Eén programma omvat: de onderdeellengte, het aantal onderdelen, de verlengingsregelaar, de loopsnelheid van de slang, de naam van de slang, het programmanummer en de diameter van de slang De slang wordt gesneden met een speciale gekartelde schijf: 520x4x40mm 9 kW spindelmotor met rem Rotatiesnelheid: 3000 tpm Tijdens het snijden houden twee scharnierende kaken, handmatig verstelbaar door een wiel, de slang vast en geleiden deze Het buigen van de slang en het voortbewegen van de snijkop worden uitgevoerd door twee pneumatische cilinders Lu ...
Ibarmia EAP 60 Mk5 Admission in drilling-spindle (morse): Mk5 Max drill capacity: dia 70 mm SPEEDS: 50 > 1004 rpm
Full automatic bandsaw with bundle clamp and autofeed CNC controlled angle positioning workpiece width in bundle clamping: 0-300 mm workpiece height in bundle clamping: 5-300 mm single material feed length: 0-600 mm repeated material feed length: 0-9999 mm maximum cutting capacity (90°, round): 325 mm maximum cutting capacity (90°, rectangle): 500 x 300 mm right mitre cut (45°, round): 300 mm right mitre cut (45°, rectangle): 300 x 300 mm right mitre cut (30°, round): 200 mm right mitre cut (30°, rectangle): 200 x 200 mm left mitre cut (45°, round): 300 mm left mitre cut (45°, rectangle): 300 x 300 mm Depth of throat: 500 mm Max height of workpiece: 325 mm Sawspeed: 18 > 115 m/min Length of band saw: 4400 x 34 x 1.1 mm Length : 2680 mm Depth : 2350 mm Height: 1350 mm Weight: 1800 kg
From a current recycling we offer you 3 x 3 modular machines/systems that are used to process spokes of impellers. The French. Manufacturer MACH 1 is a leading manufacturer in this segment. The pictures show a "line". We have 3 of them each. Year of construction 2022 Condition: good Original price: 355.000,00 € net Asset Manager: M. Vorkötter Phone: 0202-25727-3152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. Location: 68753 Waghäusel The sale is without warranty Subject to prior sale
Baguette Long Roller Width approx. 75cm with manual control with undercarriage mobile
2 units available MHS Bread Slicer Type Ideal SB Year of construction 2011/2012 with circular knife 3 disc thicknesses selectable 8/10/12mm Output approx. 130 sections per minute with bread rack for bagging with safety cover Cutting possible without oil completely stainless steel clad 230V connection Dimensions: H 110 x W 90 x D 70 cm
Skinner Maja -Type: BXM 554 -Power: 1.1 kW -External dimensions: 1900 x 1150 x 1230 mm -Cutting width: 554 mm -Belt width: 500 mm -Power supply: 400V 50Hz 3N -Weight: 370 kg -Quantity in stock: 1 -Condition: used in good condition
HAMBURGER LINE – HANDTMANN VF-612 + VERBUFA TYPE MBF-1 MACHINE AFTER GENERAL OVERHAUL YEAR OF PRODUCTION 12-2012 – START 2013 CURRENTLY UNDER TECHNICAL INSPECTION CONDITION OF NEW MACHINES WARRANTY FOR COMPONENTS AND MECHANICAL PARTS 3 - MONTHS
maximum number of results exceeded
please refine your search
