m 3063 used for sale

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 2800 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 30% ED at 280 amperes 60% ED at 210 amperes Current setting 14 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 4-wheel drive DV 26 Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 80 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. Long 1 piece ground cable 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece of protective glass 10 DIN 1 piece of white glass 1 piece spare part box, kpl ...

Planetary stirrer stirrer Model: PL 10 mature technology ... already proven many times! Easy manual operation 3 gear gears 1 stainless steel boiler 10 litres 1 flat stirrer 1 kneading hook 1 bhisend Boiler protective grille / intervention protection Table machine with boiler stroke Connection 220V, 550 watts DGUV V3-tested TOP quality and price in one machine! NEW Machine Visit us at the Milbrandt Outlet with show backroom and a wide selection of machines and equipment!

Process chiller / chiller air-cooled, Type: TAEevo Tech 802 P3-20 MTA S.p.A. TAEevo Tech 802 P3-20 are air-cooled compact water chillers suitable for outdoor installation (from -20°C to +46°C). Including crank pan heating, phase monitoring, electronic injectors, buffer tank 678 ltr., built-in P3 circulation pump on the intake side and winter control (condenser pressure control -20°C). Cooling capacity kW 159 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 27.1 Available pump pressure (bar) 3.13 Ambient Temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 79.48 Max. Current (A) 142.2 Starting Current Circuit (A) 286.2 Protection class: IP54 Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2192 Connection Rp 3" Serial No.: 2200374246 Ye ...

Planetary stirrer stirrer Model: PL 20 mature technology ... already proven many times! Easy manual operation 3 gear gears 1 stainless steel boiler 20 litres 1 flat stirrer 1 kneading hook 1 bhisend Boiler protective grille / intervention protection Table machine with boiler stroke Connection 220V, 1100 Watts DGUV V3-tested TOP quality and price in one machine! NEW Machine Visit our Milbrandt Outlet with show backroom and many machines and equipment!

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmMax. Turning Length1200 mmBar diameter max.65 mmTurning diameter500 mmWork spindle (left)Diametre of spindle nose170h5 mmSpindle noseFlat flange Spindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 ...

:::TECHNICAL SPECIFICATIONS::: CNC Model: Mazatrol Spindle nose: ASA 6 Spindle power: 22Kw Number of main spindle speeds: 5000 Turning Diameter: 540mm Self-centering diameter: 210mm Bar Passage: 51mm Turning length: 1018mm Number of tools: 40 Spindle power: 7.5Kw Number of spindle speeds: 6000 X-axis travel: 530mm Y-axis travel: +- 70mm Z-axis travel: 1065mm Adjustable B-axis travel: 1065° Fast feeds for linear axes X Y Z: 30m/min Tailstock: yes Steerer stroke: 140mm Chip conveyor: belt Presetting: yes :::D DIMENSIONS AND WEIGHT::: Length: 3500mm Width: 2100mm Height: 2500mm Weight: 5700Kg

Planetary stirrer Model: V-Mixer 60 L Professional machine with robust technology! for best results! LED display 10 power levels and timer Intervention protection / safety grille with protective switch thanks to the easy-Trop, continuous work can be done suitable for use in bakery and confectionery Stirring machine with tool: 1 whisk, 1 mixed band, 1 flat stirrer 1 60 litres stainless steel boiler Boiler stroke electric DGUV V3 tested Connection 400V, 4 kW, 16A-CEE plug Dimensions: 742 x 1060 x 1695 mm, WxDxH Continue TOP bakery machines in stock!

Planetary stirrer Model: V-Mixer 80 L Professional machine with robust technology! for best results! LED display 10 power levels and timer Intervention protection / safety grille with protective circuit Stirring machine with tool: 1 whisk, 1 kneading hook, 1 flat stirrer 1 80 litres stainless steel boiler Boiler stroke electric DGUV V3 tested Connection 400V, 4 kW, 16A-CEE plug Dimensions: 853 x 1102 x 1804 mm, WxDxH More TOP bakery machines in stock!

Planetary stirrer Model: V-Mixer 100 L Professional machine with robust technology! for best results! LED display 10 power levels and timer Intervention protection / safety grille with protective circuit Stirring machine with tool: 1 whisk, 1 kneading hook, 1 flat stirrer 1 100 litres stainless steel boiler Boiler stroke electric DGUV V3 tested Connection 400V, 4 kW, 16A-CEE plug Dimensions: 853 x 1102 x 1804 mm, WxDxH More TOP bakery machines in stock!

Planetary stirrer Model: V-Mixer 120 L Professional machine with robust technology! for best results! LED display 10 power levels and timer Intervention protection / safety grille with protective circuit Stirring machine with tool: 1 whisk, 1 kneading hook, 1 flat stirrer 1 120 litres stainless steel boiler Boiler stroke electric DGUV V3 tested Connection 400V, 6 kW, 16A-CEE plug Dimensions: 853 x 1102 x 1958 mm, WxDxH More TOP bakery machines in stock!

Vacuum processing plant Manufacturer: Fryma Type: Delmix MZM VK-7 Y.O.M.: 1994 Machine No.: M16397 Pressure inside: -1 bar Batch: 7 l for food, cosmetics, pharmaceuticals in sound condition Mobile Dimensions LWH: 900 x 800 x 1350 mm Weight: approx. 120 kg

Manufacture Krauss Maffei Type KM 350-1900C2 Year prod../ no. manufacture 2001/354332 Diameter of screw mm 60 Shot volume g 700 Presure bar 2420 Clamping force kN 3500 Mould fixing platen size mm 1060 x 1095 Distance between tie bars mm 710 x 710 Mould height - max. mm 380 Opening stroke mm 920 Max odległość pomiędzy płytami mm 1600 Control MC 4 Weight kg 16.000 Additional Hydraulics cores - 4 pcs. // Bottle with ntrogen

Machine type MIG/MAG welding system Make Merkle Type RedMIG 1600 K Connection voltage 1 x 230 volts Adjustment range 25 - 160 amperes Switch-on time 30% ED at 160 amperes 60% ED at 130 amperes Current setting 7 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 2-roll drive Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 620 mm Weight 65 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr long, 25 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 roll of welding wire, D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece of lens 90 x 110 mm white 1 piece of protecti ...

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 2000 K Connection voltage 3 x 400 volts Adjustment range 25 - 200 amperes Switch-on time 30% ED at 200 amperes 60% ED at 140 amperes Current setting 7 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 2-roll drive Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 70 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch, 3 mtr. Long 1 piece ground cable 4 mtr. Long 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece of protective glass 10 DIN 1 piece of white glass 1 piece spare part box ...

Mobile marking station Marking of metal parts - was used in Faurecia Machine checked - fine, ready for use

High-performance milling spindle, unused                high speed milling spindle, unused   Machine model: MFWS 1709/24/72 VC HSK-A 63 Fabr.: Arnold Müller GmbH Kirchheim                                                                         FS 40-10-30-4- AOW                                                                                B 812LD 9913 - 319416 spindle speed/ infinitely variable: 150... 5300 rpm taper in spindle: SK 40        Power 16 kW Torque: 30 Nm 

High-performance milling spindle, unused                high speed milling spindle, unused  high speed milling spindle, unused/new   Machine model: MFWS 1709/24/47/VC HSK-A 63 Fabr.: Arnold Müller GmbH Kirchheim                                                            FS 40-10-30-4- AOW                                                                  B 812LD 1551 - 230 30 84 Speeds/ spindle speed/ infinitely variable: 150... 5300 rpm Wz recording /taper in spindle: SK 40        Power 16 kW Torque: 30 Nm 

New machine 24-month warranty Benefits: + TOP value for money + robust dough divider with 2 fixed wheels for quick, easy transport of the dough divider + Stainless steel version + Cutting & punching grilles are easy to replace + Punching grille: profiled POM plastic knife, food-safe, for excellent sealing of the dough + Artisan, traditional sharing and moulding of the dough possible + pull-out bracket for the dough part tub + in the device can be accommodated max. 4 grid inserts + space-saving, finds space even in the smallest bakery + no power connection required, maintenance-free + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: + 1x stainless steel grid insert (see PDF / product information) + 1x stainless steel insert with POM knife (1-fold division, see PDF / product information) for dough-gentle punching of very soft  ...

High-performance deep-drawing packaging machine from MULTIVAC - ALSO SUITABLE FOR HARD FOIL - Film width 420mm - With many extras - Double format (thus 2x speed)

Machine details Bearing number 1105-03112 Machine type Machining Center - Vertical Make FAMUP Type MCX 600 Built in 1995 Control type CNC Warehouse HAGUENAU Country of origin Italy Delivery time immediately Freight base EXW 'as available' Technical details x-path 600 mm y-path 400 mm z-way 400 mm Control SIEMENS 810 D - Travel X-axis 600 mm - Travel Y-axis 400 mm - Travel Z-axis 400 mm - Number of NC axes 3 - Clamping surface (left-right) 400 mm - Clamping surface (front-rear) 400 mm - Workpiece weight (max) 300 kg - Speed range up to 6000 rpm - Tool holder ISO SK 40 - Drive power (max.) 11 kW - Number of tool positions 18 - Tool diameter max. 75 mm - Tool change time 2 s - Space requirement length 3200 mm - Space requirement width 2,900 mm - Total height 2600 mm - Total weight approx. 3500 kg Information Machine under power CNC SIEMENS 810 D Count ...

Technical data: - Drilling capacity in steel ST 60 30 mm - Drilling spindle holder MK 3 - Feeds - Drilling spindle stroke 120 mm - Drilling spindle speeds infinitely 80 - 1400 rpm - Extension 260 mm - max distance table - drilling spindle 760 mm - Table with 2 T-slots 500 x 350 mm - Height adjustable via rack with hand crank - Drive 400 V / 0.7 / 1.3 kW - Space requirement approx. W 500 x H 1900 x D 850 mm - Weight approx. 260 kg - with: - Drill chuck 3-12 mm - Lighting

Тype: WALDYSSA 33 Stretchfilm wrapping machine Маx. trays dimensions L x B x H: 300 x 200 x 160 mm Мin. trays dimensions L x B x H: 110 x 90 x 10 mm Capacity: max. 28 trays / min Machine dimensions: Length: 2500 mm Width: 1450 mm Height: 1500 mm Voltage: 380 V, 50Hz Power: 2,6 kW Machine weight: 350 kg

Modern, precise production column drilling machine according to proven UNIMAX 3 concept with infinitely variable feed drive, automatic tool ejector and standard chip breakage control. The digital display displays feed, speed and drilling depth. Turn switch Right/Left Run. Emergency-off-stroke button. Motor protection. Pre-configured machine with optional equipment thread cutting device, free cutting function and LED lamp. Normal drilling capacity in E 335: 30 mm Thread cutting power: M 20 Spindle: MK 3 Feed infinitely adjustable in the range: 30 - 400 mm/min Drilling depth programmable: 125 mm Extension: 260 mm Distance spindle/table: 90 to 840 mm Table area: 500 x 365 mm Column diameter: 110 mm Total height: 1,900 mm Weight: 280 kg Motor can be switched on pole: 0.8/1.5 kW Spindle speeds infinitely variable Drilling Range A: 80 - 1,440 rpm Drilling Range B: 180 - ...

Folding machine MBO T 800.1 6-6-4, year of construction 2005, pallet feeder, navigator control, 1. Folding unit 78/6 VN, 6 pockets, upstream and downstream knife shaft, 1 window rebate pocket for 1st or 2nd plant, gluing device HHS prepared, 2. Folding unit 78/6 VN, 6 pockets, upstream and downstream knife shaft, 3. 56/4 RFE folding unit, 4 pockets, sheet recirculation, noise insulation device, compressor, Blobreukrrks Sb Nwkeh 4. MBO SBAP 72 ME, mobile standing arch delivery, year of construction 2005, press rollers at call If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

New: MB 12 - SH | 1.2 Ton Mini Excavator | with Warranty Location: Poland | Availability: Pre-order Product Overview: We offer the MB 12 - S|H, a 1.2-ton mini excavator with a 1,000 operating hour warranty. Ideal for landscaping. Key Features: Operating weight: 1,200 kg Emission standard: EU Stage V Digging force: Arm: 3 kN / Bucket: 7 kN Dimensions: 2870 x 940 x 2280 mm Operator cabin: open Technical Specifications Engine: Co-op D192F Power: 7.6 kW / 10.3 HP at 3,000 rpm Torque: 25.5 Nm at 2,880 rpm Fuel consumption: 275–280 g/kWh Cooling: Air-cooled Fuel type: Diesel Number of cylinders: 1 Hydraulic System: Pump: Gear pump Flow rate: 18 L/min Valves: Permco Tianjin multi-way hydraulic valve Swing motor: LKC Travel motor: LKC Hydraulic hoses: Continental Hydraulic oil capacity: 13 L Max. working pressure: 160 ...

NOW IN STOCK: New MB 12 - SH | 1.2 Ton Mini Excavator | With Warranty Location: Poland | Availability: In stock Product Overview: We offer the MB 12 - SH, a 1.2-ton mini excavator with a 1,000 operating hour warranty. Ideal for landscaping and light construction work. Key Features: Operating weight: 1,200 kg Emission standard: EU Stage V Digging force: Arm: 3 kN / Bucket: 7 kN Dimensions: 2870 x 940 x 2280 mm Operator cabin: open Technical Specifications Engine: Co-op D192F Power: 13.4 kW / 18 HP at 3600 rpm Torque: 43 Nm at 2600–2800 rpm Cooling: Water-cooled Fuel type: Diesel Number of cylinders: 3 Hydraulic System: Pump: Gear pump Flow rate: 18 L/min Valves: Permco Tianjin multi-way hydraulic valve Swing motor: LKC Travel motor: LKC Hydraulic hoses: Continental Hydraulic oil capacity: 13 L Max. working pre ...

Dough kneading machine Model: MBT SP 6 Protective grille with shutdown Table machine Spiral kneader for max. 6 kg. dough Speed infinitely adjustable DGUV V3 tested Connection 220V Dough machine NEW with 12 months warranty

Mixer meat 70 liter, NEW Capacity: 35kg Dimensions: 78x61x74cm Power: 2.2kW

New MB 12 - SH | 1.2 Ton Mini Excavator | With Warranty Location: Poland | Availability: Production machine Product Overview: We offer the MB 12 - KSH, a 1.2-ton mini excavator with a 1,000 operating hour warranty. Ideal for landscaping and light construction work. Key Features: Operating weight: 1,200 kg Emission standard: EU Stage V Digging force: Arm: 3 kN / Bucket: 7 kN Dimensions: 2870 x 940 x 2280 mm Operator cabin: Closed Cabin Technical Specifications Engine: Co-op D192F Power: 13.4 kW / 18 HP at 3600 rpm Torque: 43 Nm at 2600–2800 rpm Cooling: Water-cooled Fuel type: Diesel Number of cylinders: 3 Hydraulic System: Pump: Gear pump Flow rate: 18 L/min Valves: Permco Tianjin multi-way hydraulic valve Swing motor: LKC Travel motor: LKC Hydraulic hoses: Continental Hydraulic oil capacity: 13 L Max. working  ...

Spiral Kneader / Mixer Model: SP 340 MS LED control with temperature display/temperature control with return button Dough machine with 2 timers Tool speed adjustable for min/max. 10 - 220 kg dough Flour dust hood and boiler scraper 2 tank wagons ( 340 litres ) Stand machine with changetool Stainless steel tool: kneading spiral, flat stirrer, stirrer DGUV V3-tested Connection 400V, 13.6 kW, 50A 32A-CEE plug Dimensions: 1100 x 2100 x 1500/2300mm, WxDxH NEW Machine With 12 months warranty

Spiral Kneader / Mixer Model: SP 250 MS LED control with temperature display/temperature control with return button Dough machine with 2 timers Tool speed adjustable for min/max. 10 - 160 kg dough Flour dust hood and boiler scraper 2 tank wagons ( 250 litres ) Stand machine with changetool Stainless steel tool: kneading spiral, flat stirrer, stirrer DGUV V3-tested Connection 400V, 10.6 kW, 32A 32A-CEE plug Dimensions: 1050 x 1900 x 1250/2100mm, WxDxH NEW Machine With 12 months warranty

Spiral Kneader / Mixer Model: SP 500 MS LED control with temperature display/temperature control with return button Dough machine with 2 timers Tool speed adjustable for min/max. 20 - 340 kg dough Flour dust hood and boiler scraper 2 tank wagons ( 500 litres ) Stand machine with changetool Stainless steel tool: kneading spiral, flat stirrer, stirrer DGUV V3-tested Connection 400V, 18.6 kW, 50A 32A-CEE plug Dimensions: 1150 x 2100 x 1550/2300mm, WxDxH NEW Machine With 12 months warranty

Spiral Kneader / Mixer Model: SP 175 MS LED control with temperature display/temperature control with return button Dough machine with 2 timers Tool speed adjustable for min/max. 5 - 120 kg dough Flour dust hood and boiler scraper 2 tank wagons ( 175 litres ) Stand machine with changetool Stainless steel tool: kneading spiral, flat stirrer, stirrer DGUV V3-tested Connection 400V, 7 kW, 22A 32A-CEE plug Dimensions: 1000 x 1900 x 1250/2100mm, WxDxH NEW Machine With 12 months warranty

Robust, high-quality manual sheet metal bending machine (swing bending machine) Largest bending length 3,080 mm, highest bending performance over the entire bending length - steel sheet/ST40 - 1.2 mm - stainless steel sheet 0.6 mm - zinc sheets, copper sheets, aluminium sheets - 1.5 mm, largest opening width of the upper cheek 68 mm, largest bending angle 160°, working height approx. 930 mm, dimensions 3.55 x 0.75 (without rear stop) x H 1.3 m, weight 930 kg Equipment: automatic opening of the upper cheek (patented) when lowering the bending cheek – two opening widths can be adjusted 15 mm and 65 mm, adjustable angle stop for repeat-accurate series bends, weight equalization of the bending cheek for easy machine operation, buttoned upper cheek to press folds. Optionally at an additional cost, the machines are equipped with a rear stop with 750 mm travel - as well as with a bead  ...

NC - controlled mechanical sheet metal panel scissors in backdrop cutting design, maximum cutting length 1,050 mm, maximum cutting capacity 4 mm steel sheet/ST40, cutting angle 1.5°, NC - controlled rear stop with 1,000 mm travel range - automatic removal of the stop rail at sections lower than 1,000 mm - optionally available with a foldable sheet support at the rear stop or a conveyor belt with upliftrs, drive power 5 kW, weight approx. 2,500 kg

Used Automatic Mixer Wolf K+G WETTER, Type: MMAW 114 Type 109 - 114 mm perforated disc diameter - Incl. many attachments, such as 2, 5, 8 and more - Incl. double blade set - With mixing screw and paddle mixing shaft -Stainless steel - Incl. protective grille - All documents available - Technically tested, immediately ready for use - Condition: Very good, regularly serviced and maintained Specifications: - Perforated discs ⌀: 114 mm - Capacity: max. approx. 2,400 kg/h - Hopper capacity: approx. 110 litres -El. Connection: 400 V, 50 Hz, 25 A - Nominal power: 9 kW We will be happy to answer any further questions you may have. Visits and test runs are possible by arrangement.

MAKE:FUKUSHIMA LTD. TYPE:MGA-8B MAX WORKING PR. YEAR:1979 WEIGHT:1150 MFG NO.:29760 JAPAN E SEI NO.

Pallet feeder – separating head Vaculift - Vacubelt 6 buckles Gate fold Compressor Without delivery

Automatic pile feeder Heating cylinder with oil system Rotary knife for end sheet Table delivery Machine checked and cleaned, in good working conditions.

Type: MUTIVAC R 530 Film type: flexible Bottom film width: 625 mm Top film width: 610 mm Cut-off length: 657 mm Pack sizes: 2.1 (2 pack.: 640 x 267 mm) Max.depth: 200 mm Vacuum pump: 250 m3/h Length: 8500 mm

Technical data: Drive motors/ motors Number: 6 pieces available Manufacturer: SEW Movimot Type: MM150-503-00 18215033 Condition: used, unused Power: KW 1.5 Tailor-made solutions for your intralogistics We are your competent contact for roller conveyors, belt tracks, inclined belts or telescopes for loading and unloading your goods! We will be happy to prepare your individual offer or advise you on the conception or assembly questions. Just let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of professionals. We have already successfully implemented projects for companies in a wide .B: logistics, pharmaceutical industry, crafts or the electronics industry. Together, we will develop ways to optimize your flow and material flow cost-effectively and sustainably. We can offer you even fully automatic s ...

Pleiger Hydromotor for Krauss Maffei MOS 4500-05-2203

MAKE:MACGREGOR HAGGLUNDS ART NO:388 3127-801 SERIAL NO:1994480667 SUPPLIER:100658 DATE:9450

Hagglunds MK64 11100 AO RN 0100 Hydraulic Motor available for Sale. Make: Hagglunds Type: MK64 11100 AO RN 0100 IMDIVID NO:611 46 32666/611 56 32651/611 56 32647/611 46 32650 Displecement: 11030Cm³/R Torque: 176NM/BOR Max Press:320Bar Rated Speed: 70R/Unit Max Speed:120R/Unit Max Speed Running: 600R/Unit

The machine is in good technical condition, a test run is possible by prior arrangement. (spindle 32 mm) + Mitsubishi E60 control. Bar feeder included – for bars up to 3000 mm! Max. turning diameter: 60 mm Max. turning length: 120 mm Circulation diameter over cross slide: 120 mm X-axis: 170 mm Z-axis: 170 mm Spindle bore: 34 mm Max. bar diameter when using the loader: 32 mm Spindle holder: diameter 85 mm Spindle motor: 3.7 kW Spindle speed: 100–5,000 rpm Rapid traverse (X and Z axis): 15 m/min Min. program input: 0.001 mm Max. tool diameter: 16 mm Machine dimensions (L x W x H): 1200 x 1000 x 1500 mm

Maximize the power and efficiency of your machinery with the DENISON M3B Series Hydraulic Motor, specifically engineered to convert hydraulic pressure into rotary motion for heavy-duty industrial applications. The M3B 012 1N00 B102 model delivers exceptional torque and precision, ideal for applications requiring high performance and reliability. Type: Fixed Displacement Rotary Hydraulic Motor Max Pressure: Up to 350 bar Speed Range: Up to 4000 RPM Nsbmsv D H Nney Ex Ipocu Applications: Industrial machinery, hydraulic systems, mobile equipment Made In: France Features: 1. Rotary Motion: Converts hydraulic energy into rotational power for driving mechanical systems 2. Durability: Built to withstand high torque and pressure in demanding environments 3. Efficient Operation: Suitable for continuous, high-load applications 4. Compact Design: Space-efficient for easy integ ...

MAKE:FUKUSHIMA LTD. TYPE:MGA-8B MAX WORKING PR. DATE OF MFG:1979 WEIGHT:1150 MFG NO.:29760 JAPAN E SEI NO.

MAKE:FUKUSHIMA LTD. TYPE:MA10B MAX WORKING PR.:30 MFG NO.:29801 DATE OF MFG:1979 WEIGHT:1800 KG FUKOSHIMA LTD. JAPAN T SAITO

MAKE:FUKUSHIMA LTD. TYPE:MA10C MFG NO.:29807 Max. Working Pressure:30kg/cm2 WEIGHT:1800 KG FUKOSHIMA LTD. JAPAN T SAITO

Meat mixer Sind 120 liter, NEW Dimensions: 860x510x1100 cm Power: 1,5 KW