133,373 used machines on RESALE, but how to find them? Machine Search
Thermoforming packaging machine (thermoformer, roll packer) characterized by the production of packaging from two rolls of film. Depending on the type of machine and the film used, the packaging can be soft or hard. Machines designed for packaging food and non-food products. Manufacturer: Multivac; Model: R80; Year of manufacture 1985; Working with soft film; Bottom film: +/- 420mm (approx.); Top film: +/- 410mm (approx.); Formats: 1.2; Length: 6000mm; Width: 1000mm; Height: 1800mm; Weight: 1600 kg.
Key data: 3500 kN
Ferromatics Milacron K-TEC 350-2650 / Production line with the Sepro robot Year of Make: 2017 Injection unit: Screw diameter: 70 mm Injection weight: 1104 g Spray pressure: 2175 bar Dosing volume: 1213 ccm Clamping unit: Clamping force: 350 t Handlebar spacing: 750x750 mm Size of the clamping plates: 1110x1165 mm Ejector: hydraulic Clamping unit: hydraulic Control: MOSAIC - Touch Screen Additional equipment: Very good technical condition High-speed machine Operating hours: approx. 10,000 h in automatic mode Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull x 3 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Parallel movements Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Energy-efficient machine – has a system with 3 hydrauli ...
Key data: 1500 kN
Ferromatics Milacron Magna T(MTs) 150-450 / Production line with the Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt and contactor housing / Machine in very good technical condition Year of Make: 2017 Injection unit: Screw diameter: 45 mm Injection weight: 215 g Spray pressure: 1984 bar Dosing volume: 226 ccm Clamping unit : Clamping force: 150 t Tiebar spacing: 510x510 mm Size of the clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: toggle lever Control: B&R - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hot runner controller x 36 (for additional payment) Injection unit is wear-resistant and resistant to corrosion Main motor of the machine – servo motor driven by inverter Central lubricatio ...
Key data: 350 kN
Krauss Maffei KM 35-55 CX / Machine in very good technical condition Year of Make: 2008 Injection unit: Screw diameter: 18 mm Injection weight: 18 g Spray pressure: 2500 bar Dosing volume: 20 ccm Clamping unit : Clamping force: 35 t Tiebar spacing: 320x320 mm Size of the clamping plates: 540x540 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC V - Touch Screen Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Air Valve x 2 Control with hot runners x 6 Hardened injection unit - Bimetal The machine was regularly serviced by the authorized service Krauss Maffei in Germany It is possible to change the screw diameter for fi 20 mm, 22 mm Dimensions: Weight: 2600 kg Length/Width/Height: 3.50x1.40x1.70 m Drive: Pumps/motor: 11 kW Heating capacity: 3.78 kW Total power: 14.78 kW All offered machines are s ...
Key data: 800 kN
Krauss Maffei KM 80-180 CX with the Sepro Industrial Robot 55 sprue picker Year of Make: 2005 Injection unit: Screw diameter: 30 mm Injection weight: 77.4 g Spray pressure: 2025 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC V - Touch Screen Additional equipment: Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Hardened injection unit - Bimetal Sprue Picker Sepro Industrial Robot 55 Year of manufacture: 2018 It is possible to buy a Moretto raw material feeding system at an additional cost The set includes: - Screw dosing device, volumetric with container - Conveyor with proportional valve Dimensions: Weight: 3900 kg Length/Width/Height: 3.80x1.50x2.10 m Drive: Pumps/motor: 15 kW Heatin ...
Key data: 1300 kN
Krauss Maffei KM 130-750 CX Year of Make: 2010 Injection unit: Screw diameter: 40 mm Injection weight: 228 g Spray pressure: 2500 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 130 t Spar spacing: 470x470 mm Size of the clamping plates: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC5 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Air Core Pull x 6 Control with hot runners x 18 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Dimensions: Weight: 9000 kg Length/Width/Height: 4.90x1.60x2.10 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Key data: 2500 kN
Krauss Maffei KM 250-2000 CX Blue Power with the Sepro Industrial Robot SR S5-35HL S4 Trans robot Year of Make: 2019 Injection unit: Screw diameter: 70 mm Spraying weight: 980 g Spray pressure: 1877 bar Dosing volume: 1077 ccm Clamping unit: Clamping force: 250 t Tiebar spacing: 630x630 mm Size of the clamping plates: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 - Touch Screen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air Valve with Vacuum Measurement x 1 Air Valve x 1 Hydraulic core pull x 3 Air Core Pull x 1 Control with hot runners x 16 Hardened injection unit - Bimetal Energy-efficient machine – has a system with 3 hydraulic pumps with variable power Parallel movements Proportional valve on the injection unit – precise injection Additional ...
Key data: 2000 kN
Krauss Maffei KM 200-1400 CX with the Krauss Maffei LRX Easy Control 100 robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection unit: Screw diameter: 60 mm Injection weight: 617 g Spray pressure: 2007 bar Dosing volume: 679 ccm Clamping unit: Clamping force: 200 t Tiebar spacing: 560x560 mm Size of the clamping plates: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 - Touch Screen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 Robot interface Air Valve with Vacuum Measurement x 1 Hydraulic core pull x 3 Air Core Pull x 3 Control with hot runners x 10 Hardened injection unit - Bimetal Energy-efficient machine – has a system with 3 hydraulic pumps with variable power Parallel movements Proportional valve on the injection unit – precise injec ...
Key data: 4000 kN
Krauss Maffei KM 400-3000 GX Blue Power with the Krauss Maffei LRX 250 robot Year of manufacture: 2018 Injection unit: Screw diameter: 80 mm Injection weight: 1464 g Spray pressure: 1855 bar Dosing volume: 1608 ccm Clamping unit: Clamping force: 400 t Tiebar spacing: 920x830 mm Size of the clamping plates: 1280x1240 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC5 - Touch Screen Additional equipment: Very good technical condition Operating hours: approx. 19,000 h in automatic mode Euromap 67 Robot interface Min./max. tool installation height: 400/900 mm Air Valve x 4 Hydraulic core pull x 4 Control with hot runners x 36 Self-closing nozzle x 10 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Function for automatic pulling out of the upper spar Machine has been regularly serviced by the authoriz ...
Key data: 1800 kN
Engel e-max 440/180 / Electric machine Year of Make: 2009 Injection unit: Screw diameter: 40 mm Injection weight: approx. 199 g Spray pressure: 1950 bar Dosing volume: 220 ccm Clamping unit: Clamping force: 180 t Tiebar spacing: 520x520 mm Size of the clamping plates: 760x775 mm Ejector: electric Clamping unit: toggle lever Control: CC 200 - touch screen Additional equipment: Machine in very good technical condition, worked in clean production Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air Valve x 3 Hardened injection unit - Bimetal Parallel movements Central lubrication Automatic tool height adjustment Kistler Sensor - Tool Pressure Control Original Tool Crane Dimensions: Weight: 7200 kg Length/Width/Height: 5.87x1.42x2.00 m All offered machines are started by our service technicians before they are sold ...
Key data: 2800 kN
Engel e-Motion 740/280 T WP with the TecnoMatic robot / Electric machine / Operating hours: approx. 9000 h in automatic mode Year of Make: 2016 Injection unit: Screw diameter: 50 mm Injection weight: approx. 360 g Spray pressure: 1900 bar Dosing volume: 393 ccm Clamping unit: Clamping force: 280 t Tiebar spacing: 780x780 mm Size of the clamping plates: 1100x1100 mm Ejector: electric Clamping unit: toggle lever Control: CC 300 - touch screen Additional equipment: Production line with the TecnoMatic robot Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 9000 in automatic mode Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull x 4 Control with hot runners x 64 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - Servo motor driven by inverter - Energy ...
Capacity: max 80 packs/min., Glue unit: Nordson Problue 4 hot melt, Power: 3 x 400V, 50Hz, Dimensions: 7500 mm x 1550 mm x 2900 mm
Diameter drum: 300 mm, Length drum: 830 mm, Weight: 200 kg per piece, Shape 1: 4222891, 5 pc, 120 x 110 x 9 mm, Shape 2: 4138563, 7 pc, 102 x 92 x 6 mm, Shape 3: 4194470, 5 pc, 120 x 110 x 9 mm, Shape 4: 4207502, 5 pc, 120 x 110 x 9 mm, Shape 5: 4736478, 7 pc, 102 x 92 x 6 mm, Shape 6: 4736477, 7 pc, 102 x 92 x 6 mm, Shape 7: 4145298, 7 pc, 102 x 92 x 6 mm, Shape 8: 4728143, 6 pc, 100 x 90 x 6 mm, Shape 9: 4727037, 6 pc, 100 x 90 x 6 mm, Shape 10: 4798385, 7 pc, 100 x 90 x 6 mm
Semi-automatic tempura- and battermixer with programmable recipe management, Mixer: 200 litres, Water: 2 - 5 Bar, Power: 3 x 400V, 50Hz, 7kW, Dimensions: 1250 x 950 x 1800 mm, Weight: 400 kg
Belt width: 400 mm, Height setting: 2 - 51 mm, Compressed air: 6-10 Bar, 0.7 l/miin, Power: 3 x 400V, 50Hz, 3kW, Dimensions: 2250 x 1100 x 1550 mm, Weight: 600 kg
Belt width: 280 mm, Nozzles: 4 pcs., Compressed air: 8 Bar, 400 Nl/min., Power: 3 x 400V, 50Hz, 1.3kW, Dimensions: 750 x 1350 x 1800 mm, Weight: 235 kg
General SKU251Y217 MakeDustcontrol Serial8052910 TypeDC 3800H TURBO EX No.8052910 Main Features MaterialStainless steel/Coated Motor2.2 KW Specified Features - Miscellaneous filter MaterialStainless steel 1.4301 (304) Miscellaneous filters Motor2,2 kW (400 V, 2910 rpm (Ex)) Information Year of construction2019 LocationBarneveld Floor space0,9 x 0,6 m Total height1,5 m Weight180 kg CEcheck ATEX compatiblecheck Extra Specifications- additional dust filters (consumables) Miscellaneous filtersDustcontrolFilters > Miscellaneous filtersBrand > Dustcontrol What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU357X1335 LocationBarneveld CEcheck MakeNetzsch-Condux Main Features Motor3.7 KW Inlet diameter180 mm Specified Features - Jet Mill Motor1,5 kW (380 volt, 12.000 rpm) With variable speed drivecheck Information TypeCGS 16/V-DA DSF / CFS 8/HD S No.7043 Year of construction1998 Mounted on framecheck With switchgearcheck (as is) Floor space4 x 1,4 m Total height4,5 m Weight3300 kg Extra SpecificationsTechnical specs (CGS 16/V-DA DSF — :opposed jet mill): Throughput: ca. 10 kg/h Classifier wheel outer diameter: 120 mm Dip tube diameter: 45 mm Max classifier speed: 12,000 min⁻¹ Max gas temperature: 60 °C Drive power: 1.5 kW Drive speed range: 3,000–12,000 min⁻¹ Inlet diameter: Dip tube diameter 45 mm Technical specs (CFS 8/HD-S — :fine classifier): Min speed: 600 min⁻¹ Max speed: 12,000 min⁻¹ Max operating temperature (T_max): 60 ...
This 3s EMCO Concept Mill 105 was manufactured in 2016. It features a maximum spindle speed of 5000 rpm and a spindle motor power of 1.1 kW, providing efficient machining capabilities. The machine has a table size of 420 Ã 125 mm and a maximum table load of 10 kg. If you are looking to get high-quality milling capabilities, consider the EMCO Concept Mill 105 vertical machining centre we have for sale. Contact us for further details.
DMG MORI DMF 260 | 11Year of manuf. : 2022 Control : Siemens 840 DSL - Celos Speed : 20000 rpmMovement X/Y/Z : 2600/1100/900 mmTool holder : SK 40 ____________Description:In General:Year of manufacture:2022Control system:Siemens 840 Dsl - CelosTravel ranges X/Y/Z:2,600/1,100/900 mmSpindle speed:20,000 rpmTool holder:SK 40Spindle:Technology:Direct drive spindleSpeed:20,000 rpmMax. power:35 kWMax. torque:120 NmTool holder:SK 40NC swivel head:Technology:Swivel axis (B-axis)Travel range:+/- 100°Work table:Technology:Fixed table with integrated NC rotary tableTotal clamping area:3,200 x 1,100 mmTotal table load capacity:4,000 kg/mClamping area of NC rotary table:1,050 mmMax. table load capacity of NC rotary table:1,200 kg/mC-axis:360°Tool magazin:Technology:Chain magazineNumber of stations:120Tool changer:Double gripper with ATC shuttleMax. tool diameter:130 mmMax. tool length:300 mmE ...
x-travel: 500 mm y-travel: 380 mm z-travel: 350 mm tool taper: ISO 40 spindle turning speed range: 63.0 - 4000 U/min feeds: 10 - 1000 mm/min quill stroke: 50.0 mm table load: ca. 250 kg table-size: 800 x 360 mm T-slots: 14H7 - 5/63 mm rapid traverse X-axis: 1.5 m/min rapid traverse Z-axis: 1.5 m/min rapid traverse Y-axis: 1.0 m/min Control: DIGI VRZ 650 Number of working hours: 810 h voltage: 380 V control voltage: 110 V engine output: 8.0 kW weight: 1850 kg dimensions of the machine ca.: 1880 x 1796 x 1840 mm from a training center very little run () operating hours approx. 810 hours Equipment: - robust conv. electro-motorized universal milling machine - HEIDENHAIN digital display incl. control panel swiveling, front right display font 0.005/0.001 mm - Electro-motorized adjustment of all axes (X/Y/Z axis) rapid traverse in all 3x directions Manual adjustment via handwheel also po ...
x-travel: 400 mm y-travel: 375 mm z-travel: 350 mm turning speeds: 63 - 4000 U/min spindle taper ISO: 40 Pull studs: ISO TYP B quill stroke: 50.0 mm table:: 650 x 350 mm workpiece weight: max. 200 kg T-slots: 5x 14H7 feed range: 10 - 1000 mm/min rapid traverse: 1.5 / 1.0 m/min Number of working hours: ca. 504 h control: DIGI VRZ 650 voltage: 380 V total power requirement: 8.0 kW weight of the machine ca.: 1550 kg. range L-W-H: 1640 x 1580 x 1840 mm from a training center very little run () operating hours approx. 504 hours Equipment: - robust conv. electro-motorized universal milling machine - HEIDENHAIN digital display incl. control panel swiveling, front right display font 0.005/0.001 mm - Electro-motorized adjustment of all axes (X/Y/Z axis) rapid traverse in all 3x directions Manual adjustment via handwheel also possible - Infinitely variable speed adjustment - Vertical millin ...
Technical data: SIGNODE Pallet strapping machine with press type MODULEX 4-S7 • Turnstile and centering • Strapping without/with pressing pressure (for corrugated board industry) • With MD strapping head 9 -13 mm 2000 Newton • Belt guide system with 4 belt channels (4 bayonets), of which 2 movable strapping heads • AutoFeed belt circulation system • Quick-change belt dispenser • Strapping possible without bayonets (strapping is done by the fixed strap guides) Electrical connection data: 3-pole circuit breaker 25A Control: Siemens PLC S7 controller Connection voltage: 415V, 3Ph, N, PE, 50 Hz Power consumption: 7 kW Control voltage: 24 V, DC Transport weight: approx. 7,000 Belt guide systems: Rated operating current: 20 A Number of guided tours: 4 Number of bayonets: 4 Belt spacing: 425 / 610 / 795 mm Parcel dimensions Width: max. 2,500 mm (free f ...
Robust swivel milling machine T 26 swivel from -45 to +45 degrees Pole-switchable drive motor 5 / 6kW with automatic motor brake R/L Barrel Swivel angle from - 45 to + 45 degrees electrically adjustable Height adjustment max. 150mm, electrically adjustable When adjusting the height, the correction factor for the swivel angle is displayed in the upper display, which is then adjusted at the stop, so that adjustments can be made according to drawings Four speeds 3000, 4500, 6000 and 9,000 rpm Spindle diameter 30mm, mandrel fix quick-change spindle with torque wrench Comfort stop T226 with digital displays for total adjustment and infeed jaw individually, as well as input of the cutter diameter, whereby the cutting depth is automatically calculated Stop with lifting device can be swivelled away (for sheet milling work) Table extension right and left with pull-out workpiece suppor ...
Inv. Num. : 9193 Type: EasyCut 6001.20PG Producer: MicroStep Created: 2007 Parameters: Motor power: 2 kW Work table length: 6000 mm Work table width: 2000 mm Minimum sheet thickness: 38 mm Plasma Source: Hypertherm HySpeed HSD 130 Machine weight: 2700 kg
With extra long infeed conveyor of 1600 mm, Belt width: 400 mm, Product thickness: 3 - 51 mm, Belt speed: 0.36 - 24 m/min, Compressed air: 0.7 l/min, Power: 3 x 400V, 50Hz, 3kW, Dimensions: 3300 x 1100 x 1500 mm, Weight: 650 kg
This 4-axis DMG MORI CLX 450 V4 was manufactured in 2022. It features a maximum turning diameter of 400 mm and a turning length of 800 mm. The machine is equipped with a Siemens Sinumerik 840D control and includes a turret with 12 stations, all with driven tools. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 450 V4 CNC turning center we have for sale. Contact us for further details.
This 5-axis MAVIJET MJT-W53D-4020 was manufactured in 2020, featuring a CNC 5-axis, bridge type design for precision waterjet cutting. It includes a high-pressure pump operating at 4000 bar and a rapid traverse speed of 30000 mm/min. The machine supports a cutting size of 4000 Ã 2000 Ã 250 mm and is equipped with a smart abrasive reserve tank. If you are looking to get high-quality cutting capabilities, consider the MAVIJET MJT-W53D-4020 machine we have for sale. Contact us for more information.
turning diameter: 580 mm turning length: 1500 mm control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Metal detection system MesutroncType Metron 05 CO 900 incl. conveyor belt Year of manufacture 2011. Metal detection coil diameter 900 mm, incl. durit tube. Belt conveyor length approx. 7,100 mm, with tapered roller
Manufacturer: Werner & Pfleiderer Lebensmitteltechnik - Type: MUS - 4-row - Year of construction: 2005
This 8-axis MORI SEIKI NZ-2000/T2/Y2 was manufactured in 2008. It features a twin-spindle design with a maximum Z-axis travel of 810 mm and X-axis travel of 210 mm. The machine is equipped with two turrets, each with 16 stations, suitable for complex multi-process turning and milling operations. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NZ-2000/T2/Y2 turn-mill centre we have for sale. Contact us for further details.
This 4-axis DMG MORI CMX 600 V was manufactured in 2017. It features an X-axis travel of 600 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine includes a table size of 900 x 560 mm and can accommodate a maximum workpiece weight of 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI CMX 600 V vertical machining centre we have for sale. Contact us for further details.
This 3-axis HAAS Mini Mill 2 was manufactured in 2012. It features an X-axis travel of 508 mm, Y-axis travel of 406 mm, and Z-axis travel of 356 mm. The machine includes a table size of 1,016 Ã 356 mm and a maximum table load of 227 kg. If you are looking to get high-quality machining capabilities, consider the HAAS Mini Mill 2 vertical machining centre we have for sale. Contact us for further details.
X-axis: 700mm, Y-axis: 600mm, Z-axis: 450mm, measuring system: linear encoder, resolution: 0.001mm, max. workpiece weight: 500kg, max. workpiece dimensions: 500x500x500mm, compressed air connection: 5bar, mains connection: 220V/50Hz, weight: 1.15t, software: Mitutoyo GEOPAK 3 MAN, Mitutoyo SCANPAK 3 v3.01 MAN, equipment: PC with monitor, keyboard and control unit, measuring probe with accessory case, clamping devices and further accessories, operating manuals and documentation available, condition: fully functional, software runs perfectly, regularly serviced, calibration carried out before trade fair use, no known defects. An inspection on site is possible.
MORGANA DIGIFOLD PRO -Year 2011, Totally refurbished and rebuilt with new monitor, new fold parts, new main board, etc. etc. -Touchscreen monitor 7” -Can be used in three different modes as required: - As a creasing machine - As a folding machine - As an integrated creasing and folding machine, performing both functions in a single pass -Many perforating wheels available -Suction feeder draws paper from below -Paper format: max. 900 x 358 mm /min. 210 x 140 mm -Paper weight: max. 400 gsm / min. 80 gsm -Number of creases per sheet: 9 -Max. number of folds per sheet: 2 -Number of program memory slots: over 1,000 -Min. distance between two creases: 40 mm -Min. distance between two folds: 70 mm -Fold length: 70 mm; Max. fold length up to 450 mm (automatic feed), up to 1,800 mm (manual feed) -Fine adjustment: 0.1 mm increments -Max. speed (A4): 6,000 sheets/hour -Di ...
CNC milling machine, milling and engraving machine, MECANUMERIC, MECA EASY 1510 – used - : Price ex location: 23.500.-€ (net)! Manufacturer: MECANUMERIC Type: MECA EASY 1510 Year of manufacture: 2015, former DEMONSTRATION MACHINE Three-axis milling machine in flatbed gantry design. Working paths X, Y, Z axes: 1,050 / 1,550 / 200 mm. Table frame wag Bortal: Design as a solid, stress-free, completely welded slahl construction, powder-coated. Heavy table base to accommodate the VAC-CAISSON vacuum table, designed as a cassette, air passage holes in a grid of 10 mm. Feed speed: 300 mm/sec (18 m/min) in rapid traverse and feed mode! Guidance on rails, sliding shoes with upstream ball circulation. Transmission : Precision Ball Screws Ball screw on all axes Maintenance-free, brushless servo drive motors (750 W on X and Y, 300 W on Z) Repeatability: +/- 0.025 mm Mechanic ...
NEW, width: 1.76 m, 590 kg net weight, 460 l capacity, 245 max. bar, with original Kramer 5075 mount, with 1/2 quick coupling set & hoses, electrical kit for doubling the hydraulic circuit
Deckel Maho DMU 80 EYear of manuf. : 1999 Control : Heidenhain MillPlus Speed : 12000 rpmMovement X/Y/Z : 800/650/550 mm____________Description:Spindle:Technology:MotorspindleSpeed:12.000 rpmPower (max.):15 kWTorque (max.):130 NmTaper:SK40Workingtable:Clamping surface:1.100 x 650 mmTableloading (max.):600 kgIn general:Toolmagazine:25 stationsRapid travers in X/Y/Z:18/18/15 m/minEquipment/Accessory:Chipmanagement:Chip trayCoolingmanagement:Coolant pumpOilmistseparation:Electrostatic extraction, W+W EL-FI 1000Further Equipment:Rinsing pistolFurther Accessory:Misc. used Toolholder SK 40
Deckel Maho DMU 60 TYear of manuf. : 2001 Control : Heidenhain MillPlus Speed : 18000 rpmMovement X/Y/Z : 630/560/560 mmTool holder : SK 40 ____________Description:Spindle:Technology:MotorspindleSpeed:18.000 rpmPower (max.):35 kWTorque (max.):119 NmTaper:SK40Workingtable:Clamping surface:1.000 x 600 mmTableloading (max.):400 kgIn general:Toolmagazine:2x 10 stationsRapid travers in X/Y/Z:26/26/20 m/minEquipment/Accessory:Chipmanagement:ChiptrumpetCoolingmanagement:C ooling unitOilmistseparation:Mechanical extraction, Hör AFS 11004.-Axis:Magerl Rotomatik 120 with CounterbearingProcessobservation:Operation mode 4Setup operations:Electronical handwheelFurther Equipment:Spindlechiller, Rinsing pistolFurther Accessory:Misc. used Toolholder SK 40
DMG DMU 60 monoBlockYear of manuf. : 2008 Control : Heidenhain iTNC 530 Speed : 12000 rpmMovement X/Y/Z : 630/560/560 mmTool holder : SK 40 ____________Description:Spindle:Technology:MotorspindleSpeed:12.000 rpmPower:15 kWTorque:130 NmTaper:SK 40NC-Swivelhead:B-Axis:0,001°Swivelrange:-120°/+30°NC-Roundtable:C- Axis:0,001°Clamping surface:ø600 mmTableloading (max.):500 kgIn general:Toolmagazine:24 StationsRapid travers in X/Y/Z:30 m/minClamping surface Static table:1.000 x 600 mmEquipment/Accessory:Positionsensor:Direct scales in X/Y/ZChipmanagement:Chip conveyorCoolingmanagement:Internal cooling unit with Paperbeltfilter and High-pressure, 40 barWorkpiecemeasurement:Infrared-Touchprobe, Heidenhain TS649Oilmistseparation:Mechanical extraction, ifs IFE 2000Processobservation:Operation mode 4Setup operation:Electronic handwheelFurther Equipment:Rinsing pistolFurther Accessory:Mis ...
Deckel Maho FP3-50Control : Sonstige Grunding Dialog 12 Speed : 5000 rpmMovement X/Y/Z : 500/400/400 mmTool holder : SK 40 ____________Description:Spindle:Technology:Gearbox spindle with 2 stagesSpeed:5.000 rpmPower (max.):10 kWTorque (max.):430 NmTaper:SK40In general:Rapid travers in X/Y/Z:6 m/minEquipment/Accessory:Chipmanagement:Chip trayCoolingmanagement:Coolant pumpSetup operations:Electronic handwheelWorkpiececlmaping:Vice, Allmatic Type 125Further Equipment:QuillFurther Accessory:Misc. used Toolholder SK 40
General SKU283W443 MakeKrämer TypeKD7075CEIA No.KD7075-0004 Year of construction2015 LocationBarneveld Main Features MaterialStainless steel Dia/Width40 mm Specified Features - Metal detector MaterialStainless steel 1.4404 (316L) Metal detectorcheck Electric capacity100-240 volt Tunnel sizes100x40 mm Inletcheck Capacity816000-6300000 tablets/hour Information Mounted on wheelscheck With switchcheck Floorspace1,70x0,70 m Total height2,0 m Weight370 kg CEcheck ATEX compatiblecheck Extra SpecificationsDeduster: Outlet height 1334 mm. inlet height 471 mm. conveyor height 863 mm. min/max diameter tablet 3-35 mm. min/max capsule size 14,3-26 mm. dedusting path 15 m. touchscreen control. diverterand inspection window. Helix with integral highly efficient washing nozzles, Ceia metal detector, type THS/PH21N-X3D-0002, dimensions 100x40 Metal detectorsOther pharmaceuticsS ...
General SKU283W442 MakeKrämer TypeE5000S-Wipc-1200/CEIA No.8.1165 Year of construction2013 LocationBarneveld Main Features MaterialStainless steel Dia/Width40 mm Specified Features - Metal detector Vibro sieve80000-6300000 tablets/hour Inlet471 mm Metal detectors MaterialStainless steel 1.4404 (316L) Metal detectorcheck Inlet471 mm Capacity80000-6300000 tablets/hour Information Mounted on wheelscheck With switchcheck Floorspace2,0x1,20 m Total height2,20 m Weight370 kg CEcheck ATEX compatiblecheck Extra SpecificationsDeduster: Outlet height 1334 mm. inlet height 471 mm. conveyor height 863 mm. min/max diameter tablet 3-35 mm. min/max capsule size 14,3-26 mm. dedusting path 15.5 m. Allen Bradley touchscreen control. diverter and inspection window, Helix with integral highly efficient washing nozzles, Ceia metal detector, type THS/PH21N dimensions 100x40 Metal d ...
General SKU095T577 MakeZondervan Sneek No.S-2109-01 Year of construction1989 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket1 Bar Main Features MaterialStainless steel Volume100 Ltr. Motor1.5 KW Specified Features - Tumbler mixer Tumbler mixer(1x) Capacity100 Ltr Diameter660mm Cylindrical length420mm Inletdia. 270mm Outletdia. 50mm With jacketcheck Max. temperature200 Degr. C. With motor1,5 KW, 220/380 Volt Speed mixer± 27 Rpm MaterialStainless steel 1.4401 (316) Information With switchcheck Floorspace1,5 x 0,8 m Total height1,4 m Weight430 kg Extra SpecificationsThe double jacket on this machine can only be used for cooling or heating, before or after the :turning process. Not during! The same applies to the vacuum Tumbler mixersTea, herbs & coffeeZondervanMixers > Tumbler mixersIndustries > Food & Feed > T ...
General SKU256K252 LocationBarneveld Material Housing materialStainless steel Disc materialMild steel Rotor materialMild steel Main Features MaterialMild steel Motor15 KW Inlet diameter180 mm Specified Features - Colloid mill MaterialStainless steel Colloid mills GrinderPerforated disc mill (1x) Rotor sizedia. 180mm House jacketedcheck Inletdia. 25mm Motor15,0 KW, 220/380 Volt (Ex) Speed2925 Rpm Information Makeunknown, manufacturer tag is missing Floorspace1,1x0,4 M Total height0,5 M Weight260 KG ATEX compatiblecheck Extra SpecificationsDisc is perforatedColloid mills-Mills > Colloid millsBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many ...
General SKUR0171 MakeEgli Butschwil (CH) TypeK.MI. No.1-71 Year of construction1966 LocationBarneveld Main Features MaterialStainless steel Volume2000 Ltr. Motor22 KW Specified Features - Tumbler mixer Double cone tumbler mixercheck Capacity2000 ltr Diameter1900mm Conical length950mm Inlet680x375mm Outletdia. 100mm With motor400/690 50 hz 22 kw 1470 rpm - 440/460 60 hz 25 kw 1765 rpm MaterialStainless steel 1.4401 (316) Information Floorspace3,1x2,2 M Total height2,7 M Weight2000 KgTumbler mixersSpicesTea, herbs & coffeeButschwilMixers > Tumbler mixersIndustries > Food & Feed > SpicesIndustries > Food & Feed > Tea, herbs & coffeeBrand > Butschwil What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Nethe ...
This 3-axis NANO METROLOGY Micr 7106 was manufactured in 2015. It features a measuring range of 700 mm in X, 1000 mm in Y, and 600 mm in Z, making it suitable for 3D dimensional inspection and industrial quality control. The machine includes a granite measuring table and an automatic indexing probe head. If you are looking to get high-quality 3D inspection capabilities, consider the NANO METROLOGY Micr 7106 CMM machine we have for sale. Contact us for further details.
pressure: 25 t no. of strokes: - Hub/min sheet width: - mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : 2003 : 4544 : prompt, Zwischenverkauf v : Spanien : 13800 € : 1 : 50 - 1700 (12) U/min : ISO 40 : 600/210/400 mm : 800 x 225 mm : 1500 mm : 1350 mm : 1850 mm : 950 kg : 1,5 kW with 3-axis digital display Fabr.Fagor Cooling equipment Machine lamp Swivelling universal milling head (Huron design) Horizontal milling device with counter bearing Table enclosure automatic feeds in X and Y Machine feets User Manual and EG Confirmation english BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:https://www.hesse-maschinen.com/en/lp/used-m ...
maximum number of results exceeded
please refine your search
