m 3063 used for sale

Drilling machine, column drilling machine, pillar drilling machine, pillar drilling machine, multi-spindle head, multi-spindle drilling head, drilling gear -with two-spindle drilling head Manufacturer Sigloch Schrieder Type: V602 -Drive power: 1.02/0.88 kW -Drill distance adjustable: 18-110 mm -Max. Drill: 2x Ø 6 mm -Table size: 275 mm -Spindle mount: MK3 -Projection: 220 mm -Speeds: 100-2900 rpm -Columns: Ø 100 mm -Spindle stroke: 75 mm -Transmission -Dimensions: 900/400/H1910 mm -Weight: 230kg

Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: Festo, Maintenance unit with filter and control valve, original packaging -Type: LFR-1/2-D-MIDI -Pressure: max. 16/12 bar -Number: 2x filter control valves available -Price: per piece -Weight: 1.3 kg/pc.

GeneralTraveling column machine; Control: CELOS X with HEIDENHAIN TNC7 Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal2000 mmCross800 mmVertical850 mmTool changerType of magazineChain Number of tools50 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmSwivelhead, B-axisControlled NC swivel milling head 12,000 rpm (B-axis) with clamping in position Continuously positioning NC- swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel speed: 50 rpm Swivel range: ±12Clamping System HSK-A 100Spindle taper HSK-A 100Speed range 20 -12000 rpmTorque (40% DC) 288 NmTorque (100% DC) 187 NmDrive power (40% DC) 44 kWDrive power (100%  ...

General SKU312X490 MakeGörgens Mahltechnik GmbH Dormagen TypeG-130 No.247 Year of construction2001 Main Features Motor110 KW Width1000 mm Specified Features - Fine Impact Mill MaterialStainless steel 1.4301 (304) Fine Impact Mills Turbo millcheck Rotor sizeø 1300 x 680 mm Grinding room sizeø 1580 x 1000 mm Inlet1000 x 150 mm Motorcheck 110 kW 400 V Speed 1100—1700 rpm Information LocationBarneveld With control cabinetcheck (as is) Floor space2,68 x 1,84 m Total height2,08 m CEcheckFine Impact MillsGörgens Mahltechnik GmbH DormagenMills > Fine Impact MillsBrand > Görgens Mahltechnik GmbH Dormagen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS X with HEIDENHAIN TNC7 Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minIntegrated motor spindle speedMASTER®Drive power (100% DC) 25 kWClamping System HSK-A 63Spindle taper HSK-A 63Speed range - 20000 rpmTorque (40% DC) 130 NmTorque (100% DC) 86 NmDrive power (40% DC) 35 kWNC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformationTool clamping for HSK-A63Tool clamping HSK-A63 according DIN 69893 (incl. adaptation working spindle and tool magazine)Tool magazine 30 pockets HSK-A63Tool magaz ...

GeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Working area 1Cross420 mmLongitudinal700 mmVertical380 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWClamping System ISO 7388-3 - JD30Spindle taper BT 30Speed range 20 - 15000 rpmTorque (40% DC) 48 NmTorque (100% DC) 41 NmDrive power (40% DC) 8,5 kWToolchangertoolchangerType of magazine WheelNumber of tools 25Integrated swivel rotary table simultaneousIntegated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Rotary joint, 4-channels Inclusive Software packageProduction package band filter ICS 40b ...

GeneralHSC-Precision Centre - Active chiller for main spindle and linear drives - Active chiller for electrical cabinet - Direct absolute measuring system with air purge - Coolant-airblast changeover - MPC (Machine Protection Control); Control: CELOS X with HEIDENHAIN TNC7 Technical DataSpindle taperHSK-E 50 Feed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minTool changerApplicationVertical Type of magazineChain Type of gripperDouble gripper Number of tools60 Working area 1Longitudinal450 mmCross580 mmVertical460 mmSpecial equipmentFischer spindle 40,000 rpm with wave cooling 5-axis design Tool magazine 60 places HSK-E50 Production package high chip volume with IKZ (chip conveyor, rinsing gun, rotating viewing panel, AR flushing, IKZ 40 bar/600 1) Oil Mist Separator AFS BlowinSpecial equipmentPreparation aut ...

2x heads, 15 colors, approx. 1 year old, rarely used; since production has been outsourced, it must be bought out of the existing lease agreement. The model is the MRT 1502-7S. It can embroider 15 colors simultaneously using two embroidery heads. All software is included, as well as embroidery hoops (magnetic and for caps). A heat press is also available for transferring the embroidery designs onto clothing. Find more here - / Contact us at -

Cutting dimensions X/Y: 3000mm/2000mm. The cutting head of the machine currently cannot be moved downward or upward. This problem can be resolved with a small spare part. The machine was used in the stone processing industry. Documentation available. An on site inspection is possible.

Model:MKR300 Year:2018 Condition:Used Serial Number:10070346G Stock Number:3307 Double jacket for cooling, Busch vacuum pump and lifting arm for 200L tote bin Mixer:300 litres Filling:max 220 litres Mixing speed 0 - 30 RPM Refrigerant: R404a Power: 3 x 400V, 50Hz, 6.5kW Dimensions: 1700 x 1950 x 2450 mm Weight: 1200 kg

Key data: 3000 mm, 800 mm, 800 mm

For sale Matec vertical machining center type 30 HV. Equipped with a Heidenhain and TNC 530 controller. This machining center also has a swivel head: 1-axis swivel head, infinitely variable, +/- 105°. Equipped with a chip conveyor with left ejection, and high pressure pump with fine filter installation. In very good condition. With machine clamps and tool holder SK-40 holder.

General SKU360U949 MakeÄktaprocess LocationBarneveld CEcheck Main Features MaterialStainless steel Motor0.37 KW Specified Features - Miscellaneous filter MaterialStainless steel Miscellaneous filters Motor0,37kW, 220-240/380-420Volt, 1370rpm Capacity6Ltr/h Information No.29000032 Year of construction2011 Mounted on wheelscheck Floor space1,7x0,90 m Total height1,64 m Weight370 kg Extra SpecificationsMax system pressure 6 bar at 40°C, 3 bar at 60°C, pneumatic supply 3-6 bar, max power 1500 VA, 230 volt, with B&:R touchscreen display, stainless steel keyboard, Lewa pump unit, type EEC0000-13, cap. 6 ltr/hour, Endress+Hauser flowmeter Miscellaneous filtersAKTA ProcessFilters > Miscellaneous filtersBrand > AKTA Process What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination world ...

with cross-table Max drill capacity: dia 40 mm Table dimensions: 900 x 260 mm SPEEDS: 65 > 2400 rpm

Model: Mori Seiki MV-653/50 (Year 2000) Travels (X/Y/Z): 1530 x 660 x 650 mm (60" x 26" x 25.6") Table Size: 1700 x 660 mm (67" x 26") Spindle Taper: CAT 50 / BT 50 Spindle Speed: 6,000 RPM (High Torque) Motor Power: 22 kW (30 HP) ATC Capacity: 30 Stations Machine Weight: 16,000 kg (35,270 lbs) Find more here - / Contact us at -

Measuring plate Johann Fischer Aschaffenburg Dimensions: LxWxH 1.5x0.6x0.9 meters / Weight 500Kg

Manufacturer: Mikron Model: UME600 Year of manufacture: 1995 Type of Machine: CNC milling machine Control unit: Heidenhain TNC407 Spindle taper: SK 40 Spindle speed: max. 5,000 rpm Feed rate: max. 10,000 mm/min Table size: approx. 900 × 530 mm Travel paths: X 600 mm / Y 500 mm / Z 450 mm without automatic tool changer Motor power: max. 9 kW Weight: approx: 3,200 kg Condition: - Used, good overall condition - Fully functional and ready for use Equipment / Accessories: - coolant pump - machine vice - 3D probe - Various collet sets / tool holders SK 40 - Toolbox with worktop and hand vice - Further accessories available upon request Find more here - / Contact us at -

Core Technical Specifications (2001 Model)The "70" in the name typically refers to the X-axis travel (approx. 700 mm).FeatureSpecificationX-axis Travel710 mm (Standard)Y-axis Travel520 mmZ-axis Travel520 mmB-axis (Swivel)-10° to +95° (NC-controlled)C-axis (Rotary)360° (NC-controlled)Table SizeØ 700 mm x 500 mm (NC Swivel-Rotary Table)Max. Table Load350 kgSpindle Speed12,000 RPM (Standard) up to 18,000 RPMTool TaperSK 40 or HSK 63Tool Magazine30 to 64 positions

Key data: 1750 kN, 393 g/PS, 50 mm

Clamping force: 175t Year of Make: 2005 Injection weight in hp: 393g Injection Unit .../1000 Screw diameter 50 mm Spec. Spray pressure 2304 bar Injection volume 432 cc Injection weight in hp 393 g L/D Screw Ratio 22 Clamping unit 175/... Clamping force 175 t Size of the clamping plates 915 x 910 mm Lights spar spacing 560 x 560 mm Tool installation height 350 mm Opening way 700 mm Max. panel spacing 1050 mm Ejector path 200 mm Weight 9000 kg Dimensions(m) LxWxH 5.2 x 1.75 x 2.2 m Year of construction 2005 Control type MC4

Inv. Num. : 9052 Type: OmniMat L 5000 Producer: Messer Created: 2012 Parameters: Work table length: 6000 mm Work table width: 3000 mm Maximum sheet thickness when cutting: 80 mm Maximum sheet thickness when cutting (stainless steel): 45 mm Maximum sheet thickness when cutting (aluminium): 40 mm Maximum thickness of cut sheet (carbon steel): 50mm Plasma source: HPR 400 XD Machine weight: 2250 kg

Offered is a horizontal machining center (HMC). Travels X/Y/Z: 560mm/510mm/510mm, max. dynamics: 40000mm/min, spindle: 12000rpm, tool holder: MAS BT 40, tool magazine: 60 positions (chain magazine), pallet system: 2-station pallet changer, pallet size X/Y: 400mm/400mm, accessories: approx. 200 tool holders (BT 40), 2 MMI towers with 8 clamping bars, hinged belt chip conveyor, Blum laser/probe, Renishaw 3D probe, machine weight: approx. 9000kg. Inspection possible by appointment.

Kolbe Type MW100 mixer grinder as a line with PM150 Portiomat. Portions of 250-700g and 60-280mm length (infinitely adjustable with light barrier) can be portioned. The line comes from a REWE store, stood there unused in the corner for about 10 years, according to the previous owner, and has now been given away due to a change of operator. Due to the long service life, the conveyor belt of the PM150 is brittle and torn during the video of the test run, which has to be replaced. Otherwise, we only noticed during the test run that the emergency stop switch is not installed on the PM150, but is included. The screw housing can be easily removed and the screw can be pulled out without tools. The mixing paddle is just as easy to remove. A stainless steel wrench helps loosen the nuts and union nut. Splash guard for over the nut, when operating without PM150 is also available.  ...

Key data: 13 KW, 1175 1/min

- Motor as shown in pictures - Technical data according to nameplate - Unused, mint condition

Caterpillar C2.2 - Unused - 20 kW - JAW

The MAXPRO200® plasma cutting system achieves impressive cutting speeds, consistent cutting quality and an exceptional service life of the wear parts in air or oxygen plasma gas. The optimal cutting parameters are automatically set and controlled in one step to simplify operation even more. Designed for mechanized and manual cutting and gouging at high loads and stresses, the MAXPRO200 delivers reliable performance across a wide range of industrial applications. The package offered here consists of: 1. SWIFT-CUT CNC FLAME CUTTING TABLE 1-a. Control Console 1-b. Software 1-c. Cutting table with gantry guide 2. HYPERTHERM MACHINE BURNER 2-a. Hypertherm MaxPro200 2-b. MaxPro200 Wear Parts Kit 3. MACHINE OPTIONS 3-a. Swift-Mark Marking System 3-b. Original Equipment Kit 3-c. LAN port

UNUSED, Metal casing pipes for pile driving. Normally used in the construction of bridges, ports, decks, and piers. The driven pipes is filled with concrete, creating an extremely resistant structure. Total available weight is 750 tons. SALES VALUE PER TON $ .990,00 USD / KG

Laser Cutting Machine Manufacturer: Messer Type: Multilas 6020 Year of Make: 2001 CNC Control: Omnicom 160iL Working area: 2,000 x 6,000 mm Laser: Fanuc C4000 Laser power: 4000 W Connected load: 137 A

Vibration-damping marble table, The weight of the table (445kg) is ideal for a weighing table., Dimensions (mm): 805x900 H 88 , Weight:: 445 Kg

Vertical machining center EUMACH SUMO 1100, CNC Selca X 1100 mm Y 610 mm Z 610 mm Rapid feeds linear axes X Y Z 30 m / min Table dimensions 1270 x 640 mm Max table load 1200 Kg Spindle 16 Kw / 10,000 rpm - ISO 40 Tools 24 Coolant through the spindle 2007 Under power in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy, The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations, with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several motion axles and one, automatic tool exchange system and sometimes multiple pallets

SALMON SLICER-PORTIONER, GEBA TYPE: GPS 200 ASW Technical description: Serial number: 6000 204 Year: 2002 Power supply: 380/440 V - 50/60 Hz - 3 Ph Band width: 390 mm (plastic) Weight: 475 Kg Dimensions: 2750 x 1000 x 1490 mm The GPS 200 ASW is the Top Slicer. When the GP series was introduced in 2000 it caused a revolution. The industrial look initiated a new design- era at GEBA. With the new GPS 200 ASW we matched the challenge, to keep on perfektioning this extraordinary line of products, not only optically but also technically. Now you increase your yield and profit with computer-controlled adjustment (ASW) of the slice thickness and the cutting angle.

GRADING - WEIGHING MACHINE, MAREL PROLINE, TIPO: GRA-PR30-04 Technical description: Serial number: A064049 Number of stations: 4 Power supply: 220/240 V - 50/60Hz Conveyor band: Intralox series 1650 ftpp b = 305 Conveyor width: 305 mm Total dimensions: 4900 x 1300 x 1650 mm

BREADING MACHINE MAREL TOWNSEND FURTHER PROCESSING B.V., MODEL: TRM 630 Technical description: Marel Townsend Further Processing B.V. rolling machine. Model TRM 630 Type 472640 Serial number 10096047 Plastic belt, belt width: (2x) 630mm Total dimensions: 2050mm x 1300mm x 2100mm

FORMING MACHINE KOPPENS, MODEL: VM 600 HS Technical description: Machine number: VM 600 HS-481 Power supply: 380 V, 45.47 A, Ph 3, 50 Hz Power: 22.09 Kw Weight: 1675 Kg Conveyor width: 600 mm Dimensions: 2400 x 1300 x 2100 mm Different formats available

FORMING MACHINE KOPPENS, MODEL: VM 600 Technical description: Serial number: VM-600-55 Power supply: 415 V, 3 Ph, 50 Hz, 23 A Power: 11,31 kW Conveyor width: 600 mm Form size: (7x) 60 mm Weight: 850 Kg Dimensions: 2000 x 900 x 1950 mm

FORMING MACHINE KOPPENS, MODEL: VM 600 HS Technical description: Serial number: VM 600 HS-281 Conveyor width: 600 mm Weight: 1.750 Kg Power supply: 380 V, 3 Ph, 50 Hz, 45 A, 22 kW Dimensions: 2400 x 2100 x 2200 mm

RÜHLE FROZEN BLOCK CUTTER, TYPE GFR 450 Technical description: Guillotine for cutting frozen meat and other types of frozen blocks such as frozen fish blocks, frozen blocks of vegetables and fruits to minus 20 degrees Celsius. The Ruhle guillotine achieves a capacity of up to 3000 kg/h and has also been adapted for inclusion in the technological line. The device has been equipped with 4 vertical cutting knives, which allows fine shredded cut block. A separate container for felling and very accurate feeding of the trolley to the finished product minimizes the loss of raw material. Maximum cut dimensions of the block: 450×250 (mm)

BREADING MACHINE, TITAN INTERNATIONAL, TYPE: TPM 630 Technical description: Serial number: 871038 Material: Stainless steel Mesh widht: 630 mm Hopper load capacity: 208 Lt Power supply: 380-440 V / 50-60 Hz Dimensions: 1850 x 1000 x 2000 mm

FORMING MACHINE, KOPPENS TYPE: VM 400 Technical description: Serial number: VM 400/30-1517 Power supply: 380 V, 3 Ph, 50 Hz, 4,94 kW, 12.39 A Weight: 550 kg Mesh belt conveyor Conveyor width: 400 mm Dimensions: 2400 x 680 x 2270 mm

FORMING MACHINE, KOPPENS TYPE: VM 400 HD Technical description: Serial number: VM400 HD-1717 Power supply: 380 V, 3 Ph, 50 Hz, 7,67 kW, 16.57 A Weight: 830 kg Mesh belt conveyor Conveyor width: 400 mm Dimensions: 2000 x 950 x 2350 mm

FORMING MACHINE KOPPENS, TYPE: VM 400 HS Technical description: Serial number: VM 400 HS-1481 Power supply: 380 V, 3 Ph, 50 Hz, 23 A, 7,77 kW Weight: 810 kg Dimensions: 1900 x 900 x 2200 mm

FORMING MACHINE, FORMAX TYPE: PFM-19 Technical description: Serial number: 416 Power supply: 380 V, 3 Ph, 50 Hz, 27.6 kVA, 42 A Conveyor width: 550 mm Format diameter: (3x) 120 mm Dimensions: 3000 x 1000 x 2700 mm The Fl9s hydraulic injection forming system offers extremely accurate weight control and the ability to manufacture a wide range of products at different temperatures. It achieves high performance and forms products with a natural texture and excellent appearance.

PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-200 Technical features Output: up to 200 cans/minute Recommended output: 150 to 180 cans/minute (according the can type) Format: diameter 83,7 mm Cans height: 25-62 mm

CNC bending machine Type: Biegemaster BM 6,15 Manufacturer: Sperr & Lechner Year: 2016 The bending machine can bend sheets up to a thickness of 1.5 mm steel sheet, in the case of aluminum sheet the maximum thickness is 2 mm. The maximum length of the bent sheet is 6200mm and the width is 915mm. Machine in good condition, fully functional, under power Find more here - / Contact us at -

Aufschnittmaschine / Slicer GRAEF MASTER 3370 Technical data: 230 Volt / 50 Hz / 2.2 A / 450 W Cutting thickness adjustment: 0 to 24 mm Knife diameter: 330 mm Stainless steel knife, smooth Power current Machine with CERA 3 coating Weight: 43 kg Cutting size square: 300 x 224 mm Cutting size: Ø 190 mm External dimensions (L/W/H): 660 x 620 x 470 mm Installation area (L/W): 585 x 440 mm Carriage dimensions (L/W): 300 x 340 mm Knife speed: 229 rpm Noise level:

Mueller Martini Ventura MC 160 - sewing machine year 2016 max. speed 9,600 signatures/h Signatures: length min. 120 mm length max. 425 mm width min. 75 mm width max. 320 mm thickness max. 4 mm Servo Drives Touch Screen Commander control max. 11 stitches Opening 2+2 Venturi jets Belt Delivery 3215.8225 signatures control by ASIR 3 3215.8045 leaf chain for thin signatures 3215.8043 device for thread melting

Stephan MC12 microcut from a company takeover. The cutting ring was equipped with new knives and a new cutter head was installed. After that, the machine was only used a few more times and since the takeover in 2021, it has been standing, which is why the new owner also sold it.

Line for packing apples in 7kg cartons. Producer: Maf Roda, France

Head machine / dough divider W&P, Type: Multimatic MUC-5 -Overhauled- - Gentle dough division - 5 rows - Weight range: 35 - 85g - Capacity: max. 10,000 pcs. / h - Stainless steel - new tapes - Condition: Very good, many parts renewed Viewing and test run are possible.

2 side tables 3 knives Photo cells Program

Inv. Num. : 9057 Type: CTX 310 Producer: DMG MORI Created: 2004 Parameters: Control system: SINUMERIK 840 D Maximum turning length: 450 mm Max. turning diameter: 200 mm Maximum turning diameter over bed: 330 mm Maximum turning diameter over support: 260 mm Maximum length of travel in the X-axis: 160 mm Maximum feed in the Z-axis: 450 mm Maximum spindle speed: 6000 1/min Weight: 3950 kg

Semolina plastering machine MIAG DK 30 drive left, lighting, aluminium frame, 1 spare frame.