m 3063 used for sale

Measuring amplifier, power supply module, measuring amplifier point design -Manufacturer: Keyence, Measuring amplifier point version -Type: SJ-M300 -Discharge rod: Type SJ-M030G -Number: 3x measuring amplifiers available -Price: per piece -Transport dimensions: 250/180/H80 mm -Weight: 0.9 kg/pc.

Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: Festo, filter regulator with pressure gauge -Type:LFR-1/4-D-MINI 159631 -Pressure: max. 16 bar -Quantity: 1x filter control valve available -Dimensions: 210/120/75 mm -Weight: 0.6 kg

Servo motor, geared motor, electric motor -Manufacturer: Lenze, servo motor with gearbox -Speed: 92.7 rpm -Engine: Type MCA 10140-RS0B0 -Voltage: 390 V / 140 Hz -Power: 0.80 kW -Transmission: Type G50BH121MVAR2C00 i=42.593 -Shaft: Ø 25 x 50 mm -Quantity: 1x geared motor available -Dimensions: 483/160/H170 mm -Weight: 12.5 kg

Valve manifolds, multipole connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: Festo, Valve manifold MPA-FB-VI -Solenoid valves: 537953 / 533343 -Electronic modules: VMPA1-FB-EMG-8 / VMPA2-FB-EMG-4 -End disk: VMPA-FB-EPL-EU -Bus node: CPX-FB33 -Individual components: see photos -Number: 4x valve manifolds available -Price/Fee: per unit -Dimensions: 255/145/H65 mm -Weight: 1.9 kg/pc.

Valve manifolds, multipole connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: Festo, Valve manifold type MPAL-VI 569926 -Pressure regulating valve: RR-FTO-KC -End plate: VMPAL-EPL-IPO32 -Solenoid valves: 11 pieces type 533343 / 1 piece 533354 -Individual components: see photos -Number: 2x valve manifolds available -Price/Fee: per unit -Dimensions: 260/140/H70 mm -Weight: 1.7 kg/pc.

Valve manifolds, multipole connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: Festo, Valve manifold type MPAL-VI 569926 -Solenoid valves: 13 pieces type 533343 / 533342 / 533351 -Individual components: see photos -Quantity: 1x valve manifold available -Price/Fee: complete -Dimensions: 230/145/H70 mm -Weight: 1.5 kg/pc.

Valve manifolds, multipole connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: Festo, Valve manifold type MPAL-VI 569926 -End plate: VMPAL-EPL-IPO32 -Solenoid valves: Type 533343 / 533351 9 pieces -Pressure regulating valve: -Individual components: see photos -Price/Fee: complete -Dimensions: 205/140/H70 mm -Weight: 1.2 kg

Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Griesheim, machine cutting torch, flame cutting machine -Type: Quicky Electronic -Cutting speed: adjustable -Voltage: 220 V 40 W -Dimensions: 550/280/H300 mm -Weight: 8.4 kg

Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Griesheim, machine cutting torch, flame cutting machine -Type: Quicky -Cutting speed: adjustable -Voltage: 220/240 V -Dimensions: 360/330/H280 mm -Weight: 6.7 kg

Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Griesheim, machine cutting torch, flame cutting machine -Type: Quicky Electronic -Cutting speed: adjustable -Voltage: 220 V 40 W -Dimensions: 520/270/H330 mm -Weight: 8.6 kg

Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Cutting & Welding, machine cutting torch, flame cutting machine -Type: Quicky -Cutting speed: adjustable -Voltage: 230 V 40 W -Dimensions: 520/280/H330 mm -Weight: 7.8 kg

Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Griesheim, machine cutting torch, flame cutting machine -Type: Quicky Electronic -Cutting speed: adjustable -Voltage: 220 V 40 W -Dimensions: 520/280/H300 mm -Weight: 7.2 kg

Safety controller, safety switch, safety sensor, overload trip power sensor, load circuit monitoring module, load circuit monitoring, load monitoring -Manufacturer: Murrelektronik, load circuit monitoring -Type: MICO 4.6 -Art.No.: 9000-41034-0100600 -Quantity: 4 available -Price: per piece -Dimensions: 90/70/H75 mm -Weight: 0.2 kg/pc.

End-side driver, end-side driver, end-side driver, driver tip, end-side driver, end-side driver -Manufacturer: Lenze ABW, end face drive (2 pieces) -Type: RD4 / MS4 -Forehead dimension: Ø 40 mm / Ø 45 mm -Recording: MK4 -Price/Fee: complete -Transport dimensions: 173/112/H60 mm -Total weight: 2.4 kg

Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: Festo, Maintenance unit filter control valve -Switching valve: MS6-EM1-1/2 -Filter control valve: M56-LFR-1/2-D7-ERM-AS -Switching valves: M56-EE-1/2-V24 M56-EE-1/2-V24-S -Pressure build-up valve: M56-DL-1/2 -Branch module: M56-FRM-1/2-Y -Individual components: see photos -Number: 3x maintenance unit available -Price/Distribution: per piece, complete unit -Dimensions: 440/120/H340 mm -Weight: 5.2 kg/pc.

Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: Festo, Maintenance unit filter control valve -Type: MS9-LFR-3/4-D7-EUM-AG-BAR-AS 562531 -Quantity: 1x filter control valve available -Dimensions: 440/115/H205 mm -Weight: 3 kg

Reinforcing steel mesh shears such as guillotine shears, sheet metal shears, sheet metal guillotine shears, hydraulic shears -Manufacturer: Maschinenfabrik Bock, hydraulic guillotine shear, reinforcing steel mesh shear type 2550 -Cutting width: 2500 mm -Max. cutting capacity: Ø 12 mm double at 100 mm pitch -Motor: Dietz 7.5 kW -Space requirement: 3020/2000/H1320 mm -Transport dimensions: 3130/1080/1465 mm -Weight: 2000 kg

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: Elektron, Manometer: 0-6 mWS / 0-0.6 bar, unused, original packaging -Type: HD997A0 -Item No.: 6AC 5080-71 -Quantity: 1x pressure gauge available -Cardboard dimensions: 140/115/H50 mm -Weight: 0.7 kg

Knurling machine, window construction profile machine, insulation joining machine -Manufacturer: Aluro, BTM knurling machine with accessories -Type: Knurling Machine -Function: a single machine, solely for knurling the strand cavity -Drive: 2x Lenze 0.55 kW -Rollers: Ø 125 mm -Travel distance X/Z: 120/155 mm -Accessories: see photos -Dimensions: 1180/700/H1480 mm -Weight: 297 kg

Motor protection relays, relays, heating current monitoring, preheating for generators, contactors, semiconductor contactors, contactors, motor protection -Manufacturer: Siemens / Moeller, Motor protection overload relay -Siemens. Type 3TF2801-0AP0 -Moeller: Type ZE-6 -Quantity: 1 available -Dimensions: 95/45/H75 mm -Weight: 0.3 kg

Motor protection relays, relays, heating current monitoring, preheating for generators, contactors, semiconductor contactors, contactors, motor protection -Manufacturer: Siemens / Moeller, Motor protection -Siemens. Type 3TF2801-0AP0 -Moeller: Type ZE-1.6 -Quantity: 1 available -Dimensions: 95/45/H75 mm -Weight: 0.3 kg

Motor protection relays, relays, heating current monitoring, preheating for generators, contactors, semiconductor contactors, contactors, motor protection -Manufacturer: Siemens, Sirius 3R motor protection overload relay -Type: 3RU1116-1GB0 -Auxiliary switch: 3ZX1012-0RH11-1AA1 -Quantity: 1 available -Dimensions: 120/45/H70 mm -Weight: 0.3 kg

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: TGL, Manometer 0 - 16 bar / 0-1.6 MPa, unused, original packaging -Type: 1/BM 20/2 160Ø 0-1.6 MPa -Number: 18x pressure gauges available -Price: per piece -Cardboard dimensions: 200/180/H70 mm -Weight: 0.9 kg/pc.

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester, barometer -Manufacturer: TGL, Manometer 0 - 0.4 bar, unused, original packaging -Type: KM 160 0-4000 mmWs -Number: 3x pressure gauges available -Price: per piece -Cardboard dimensions: 190/180/H70 mm -Weight: 0.9 kg/pc.

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester, barometer -Manufacturer: TGL, Manometer 0 - 16 bar, unused, original packaging -Type: KM 160 0-1.6 MPa -Quantity: 1x pressure gauge available -Cardboard dimensions: 200/200/H90 mm -Weight: 0.9 kg

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester, barometer -Manufacturer: TGL, Manometer-1-0-15 bar unused original packaging -Type: Ø 160 mm -0.1-0-1.5 MPa -Quantity: 1x pressure gauge available -Cardboard dimensions: 200/200/H90 mm -Weight: 0.9 kg

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester, barometer -Manufacturer: TGL, Manometer 0 - 0.1 bar, unused -Type: Ø 160 mm 0-1000 mmWs -Quantity: 1x pressure gauge available -Dimensions: 200/160/H100 mm -Weight: 2.7 kg/pc.

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: TGL, Manometer 0 - 400 bar, unused, original packaging -Type: Ø 160 mm 0-40 MPa -Quantity: 1x pressure gauge available -Cardboard dimensions: 200/200/H90 mm -Weight: 1.0 kg

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: TGL, Manometer 0 - 400 bar, unused, original packaging -Type: Ø 160 mm 0-40 MPa -Quantity: 1x pressure gauge available -Cardboard dimensions: 200/200/H90 mm -Weight: 1.0 kg

Servo motor, electric motor, DC motor, servo geared motor, synchronous motor -Manufacturer: Siemens Wittenstein, servo geared motor -Synchronous motor: Siemens type 1FK7101-2AF71-1RG0 -Voltage: 278 V -Gearbox: Wittenstein SP 100S-MC1-3 -1K1-2K i= 3 -Shaft: Ø 32 x 55 mm -Protection class: IP64 -Number: 3 servo motors available -Price: per piece -Dimensions: 450/190/H255 mm -Weight: 33 kg/pc.

Servo motor, electric motor, DC motor, servo geared motor, synchronous motor -Handover: in its current condition as inspected -Connector plug: Damage, see photos -Manufacturer: Siemens Wittenstein, servo geared motor -Synchronous motor: Siemens type 1FK7101-2AF71-1RG0 -Voltage: 278 V -Gearbox: Wittenstein SP 100S-MC1-3 -1K1-2K i= 3 -Shaft: Ø 32 x 55 mm -Protection class: IP64 -Dimensions: 450/190/H255 mm -Weight: 33 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Montech, belt conveyor type TB30-140/M with servo motor -Speed: 87 m/min -Drive: Nucleus NUDrive MP85 10A Bgr2 R Rev2 IP64 -Belt width: 110 mm -Conveyor length: 1290 mm -Transport dimensions: 1310/390/H160 mm -Weight: 15.2 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Montech, Belt conveyor type TB30 double belt with light switch -Speed: 87 m/min -Drive: Nucleus NUDrive MP85 10A Bgr2 R Rev2 IP64 -Strap width: 2x 15 mm -Conveyor length: 1290 mm -Light switch: Sick WTB9-3P2261, not connected -Transport dimensions: 1290/390/H260 mm -Weight: 14.5 kg

Touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, Simatic Multi Panel, Touch Multi Panel -Manufacturer: Siemens, KTP400F Mobile Simatic HMI -Type: 6AV21252DB230AX0 6AV2 125-2DB23-0AX0 -Number: 3x panels available -Price: per piece -Transport dimensions: Ø 250 x 140 mm -Weight: 1.7 kg/pc.

DC spindle motor, electric motor, DC motor, servo motor -Power: 11.5/18.5 kW -Speed: 1160/3500 rpm -220 V -79/96 A -Speedometer: 6V/krpm -Shaft: Ø 50 mm -Design: B3 -Additional cooling -Dimensions: 910/340/H400 mm -Weight: 200 kg

Clamping plate with T-slots, plate field, welding table, welding table, pallet changer -comes from a CNC machining center MAHO type MC 600 -Width: 500 mm -Length: 500 mm -Height: 180 mm -with supporting ribs -Groove width: 14 mm -Number: 1 table available Price: per piece -Weight: 200 kg/piece

Spindle machining unit, automatic drilling machine, drilling machine, pillar drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Drive: 0.25 kW -Speed: 2755 rpm -Drill head: Ø 12 mm -fixed, without feed -Number: 3x drill heads available Price: per piece -Dimensions: 470/120/H150 mm -Weight: 7 kg/piece

Spindle machining unit, automatic drilling machine, drilling machine, pillar drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Drive: 0.25 kW -Speed: 2755 rpm -Drill head: Ø 12 mm -fixed, without feed -Number: 8x drill heads available Price: per piece -Dimensions: 700/120/H150 mm -Weight: 11 kg/piece

Micrometer screws, micrometer screws, tooth width measurement, plate measuring surfaces -Measuring range: 50-75 mm -One rotation of the drum corresponds to: 0.5 mm -without locking device -large measuring surfaces -Measuring force: Ratchet -Including: case -Adjustable dimensions -Hand protection -Quantity: other sizes also available -Weight: 0.7 kg

Micrometer screws, micrometer screws, tooth width measurement, plate measuring surfaces -Measuring range: 275-300 mm -One rotation of the drum corresponds to: 0.5 mm -with locking device -Measuring force: Ratchet -Adjustable dimensions -Hand protection -Key -Quantity: other sizes also available -Weight: 1.5 kg

General SKU225Y106 MakeDeltafilter Serial5454 Magento base g_extra_specificationsFilter self cleaning filter, Make DELTAFILTER Filtrationssysteme GmbH, Type DELTA-STRAIN 110-D/L-H/S, No. 5454, Year of construction 2009, Material Stainless steel 1.4404, Stainless steel 1.4435 (316L), Stainless steel 1.4571 (316Ti), Floor space 0,9x0,9 m, Total height 1,55 m, Weight 200 kg, CE , Extra Specifications Flow capacity in relation to clean water for: 50-100 µm filtration - 24 m³/h 150 µm filtration - 26 m³/h Inlet: DN65 Outlet: DN65 Discharge: DN50 Vent, cleaning: 3/4 BSP Seals: FPM, PTFE Motor data: 400 V, 50 Hz, 180 W Maximum allowable pressure (PS): 10 bar for productroom/heating-jacket Test pressure (PT): 15 bar for productroom/heating-jacket Min./max. allowable temperature (TS): -10°C / +120°C Volume (V): 23,8 litres for productroom 15,3 litres for heating jacket Information Y ...

General SKU390X1024 MakeHuzap TypeOktabin inliner closing machine Mach.No.20-7547 Main Features MaterialMild steel Motor5.5 KW Specified Features - Miscellaneous Motor5,5 kW, 400 volt MaterialMild steel Information Year of construction2020 LocationBarneveld Floor space4,32 x 2,20 m Total height3,50 m Weight1700 kg CEcheck Extra SpecificationsThe machine is used to weld/heat-seal (close) plastic inliners (bags”) in octabin containers. It is a mobile (movable) welding/sealing fixture that clamps and tensions the inliner foil and then performs the sealing weld. Application: heat-sealing/welding octabin inliners (plastic bags) Design: mobile/movable welding fixture (clamping + tensioning + sealing) Seal beam: 2200 mm Compressed air: 3.5 bar Air consumption: ~10 Ndm³ per welding cycle Drive system: lifting/lowering frame via gearmotor (SEW SA67 DRN80M4, 0.75 kW, 40 ...

General SKUR1054 MakeCollette (B) TypeMPH -1500 No.83MH1523 Year of construction1983 LocationBarneveld Main Features MaterialStainless steel Volume1500 Ltr. Motor18.5 KW Specified Features - Planetary mixer Planetary mixercheck 1 Mixing/kneading shaftcheck Motor± 18.5 kW With covercheck With pancheck Capacity1500 l. Pan sizesø 1500 x 950 mm Outletø 400mm With hydraulic liftingcheck Motor5,5 kW 380 V MaterialStainless steel 1.4305 (303) Information With switchgearcheck Floor space2,3x1,8 m Total height3,3 m Weight4000 kgPlanetary mixersColletteMixers > Planetary mixersBrand > Collette What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machin ...

Key data: 600 mm, 20

The Mahr Primar GMX 600 gear measuring machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies, for the process of measuring gears, camshafts, rotationally symmetrical components, tools. . Technical data Diameter: 600 mm Module: 20 mm Axial travel: 700 mm Dimensions: 2,300 x 2,400 x 1,800 m Machine weight: approx. 5,000 kg Information and data are non-binding, subject to prior sale Special features: Can be delivered as a used machine or as a retrofit with a new control system based on Siemens and measurement software.

Used line for weighing, portioning, and packaging apples into polyethylene bags made by MAF-RODA and GIRO. The apple weighing, portioning, and packaging line consists of several components that, when assembled, form a single unit. Line components: 1. Water unloading tank. 2. Water unloading chute. 3. Fruit elevator from the water. 4. Inspection table. 5. Brush dryer. 6. Apple feed conveyor. 7. PDG series fruit weighing machine. 8. Plastic bag packaging head with label printer. 9. Rotary table. 10. Water circulation pump.

Manufacturer: Heesemann, Type: MFA 6 Impression, Year: 2008, Control: Längs/Stahlwalze/ Bürste, Monting of the machine: 1300, Double sided sanding line: 3 - 140, Sanding width mm: 1, Sanding hight mm: 2620 x 1350, Number of sanding belts: 0,5 - 12, Konstantentisch: Konstatntentisch, Bürstenaggregate: CSD , Rubber roller: 16, Band 1 Leistung kW : 15, Konstantentisch: Konstatntentisch, Band 2 Leistung kW : 5 - 25, Belt 2 shoe unit: 3, Band 2 Queraggregat: yes, Band 2 Schleifbandgeschwindigkeit m/s : yes, Band 3 Kombiaggregat: yes, Band 3 Schleifbandgeschwindigkeit m/s : 1,5 kW, Year :2008

Manufacturer: MAW IMA, Type: Frontenbohranlage, Year: 2000, Control: Ferrocontrol, Program: yes, Function: Bohren und Beschläge setzen, Work piece width min-max mm: 300-600, Min.-max. workpiece length in mm: 400-1500, Min.-max. workpiece height in mm: 16-22, Destacking unit: yes, Inlet roller conveyor: Hordenwagen, One or two Spot machine: Stern 4 Platz, Working stations: 4, Dowel driving station: no, Milling spindles horizontal: no, Milling spindles vertical: no, Fitting type: Topfband, Belt drilling stations: yes, Bänder Eindrehstation: yes, Hinges inserting unit: yes, Magazin for hinges!: yes, Set buffer: yes, Dowel driving station: no, Working range X: 1500, Working range Y-axis: 600, Drill gearings: 2, Drilling supprt from bottom: 1 Verstärktes Bohrgetrieb Beschlag/ L Bohrkopf<CRLF>ca.12 spindeln, Drill gearings: 2, Drill support from top: 1 Stück 3 Spindeln, Drill gearing ...

Manufacturer: De Stefani, Type: MVT 3500, Year: 2008, Monting of the machine: 3 X Profilschleifen, Program: yes, Axis control: no, Work piece width min-max mm: 60, Min.-max. workpiece height in mm: 80, Work piece length min-max mm: 250, Sanding hight mm: 80, Schleifaggregate rechts : 3, Abrasive belts at top: 3, Monting of the machine: 3 X Profilschleifen, Chain width mm: yes, Monting of the machine: ca.1,5, Unit 1 tiltable: yes, Aggregat 1 kW: ca.1,5, Unit 2 slewable: yes, Aggregat 2 kW: ca.1,5, Unit 3 slewable: yes, Aggregat 3 kW: ca.1,5, Unit 9 slewable: 3, Shoes electr. controlled: yes, Constant table hight: yes, Machine length: ca.4000, Year :2008

Manufacturer: Heesemann, Type: MFA 8/Rechtsmaschine, Year: 1996, Monting of the machine: Längs/Bürste, Sanding width mm: 1350, Sanding hight mm: 3 - 140, Number of sanding belts: 1, Sanding belt dimensions: 2620 X 1350, Band 1 Leistung kW : 11, Belt 1 shoe unit: yes, Band 1 Schleifbandgeschwindigkeit m/s : 0,5 - 12, Elektronische Tastung mm: yes, Separation of sampling in mm: 16, Frequency control of belts: 1, Continous adjustable feeding speed m/min: 5 - 25, Transportbandantrieb kW: ca.3, Intermediate sanding of lacquer: yes, Constant table hight: yes, Vacuum table: yes, Segment sanding shoe: yes, Brushing unit: yes, Diameter/ brush bristles: 150, Year :1996

Manufacturer: Heesemann, Type: MFA 6, Year: 2011, Control: PC, Monting of the machine: Quer/Längs/Bürste, Sanding width mm: 1350, Sanding hight mm: 150, Number of sanding belts: 2, Sanding belt dimensions: 2150 X 1350, Steel roller: kombi, Belt 1Transverse sanding unit: yes, Elektronische Tastung mm: yes, Separation of sampling in mm: 16, Frequency control of belts: 2, Combi unit roller/shoe: yes, Continous adjustable feeding speed m/min: 5-15, Transportbandantrieb kW: 1,5, Intermediate sanding of lacquer: yes, Constant table hight: yes, Segment sanding shoe: yes, Brushing unit: yes, FREE TEXT: vakuumteppich/Zustand sehr gut, Year :2011