134,083 used machines on RESALE, but how to find them? Machine Search
technically efficient, ready to work - after full service bar spacing: 100 mm dimensions: 265 x 265 cm height: 150 cm weight: 350 kg
Mengmixer TALSA, type: MIX-P in neat used condition - Boiler capacity: 100 litres - Forward and reverse gear - Stainless steel bowl and mixing arm - Condition: Very good, regularly serviced and maintained Further information on request. Visits and test runs are possible.
Milling machine Micron VCP 800 Heidenhain TNC 426 Year of manufacture 1999 Table size 1050 x 590 X 800 / Y 450 / Z 450 Maximum speed 20,000 RPM Maximum table load 400 kg Machine weight 6,500 kg Machine size 3,200 x 3,200 x 2,800 mm Spindle holder: HSK-63A Magazine slots: 30 Tool changers, all places have been renewed and adjusted. X-axis spindle replaced Without tools and vices
Piston head for Frech die-casting machine, bronze, 931603, Frech/Müller Weingarten, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, Piston head for Frech/Müller Weingarten die casting machine, Outer diameter 251.5 mm, thread inner diameter 196.5 mm, height 200 mm, 34 kg
General SKU293X393 MakeNovasep TypeTFF Sius No.2360-F Year of construction2013 LocationBarneveld Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4301 (304) Filtercheck TangenX Filter surface2,5 m² Information Floor space0,95x0,65 m Total height0,80 m CEcheck Extra SpecificationsTangential flow filtration skid, Service pressure 0 to 3 bar. service temperature 15°C to 40°C. Siemens touch screen control, type Simatic HMI. tubing throttle valve, tubing size 16-88, with 2x Watson Marlow pumps, type 620u and 520u Miscellaneous filtersNovasepFilters > Miscellaneous filtersBrand > Novasep What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Plea ...
Number of spindles: 6, max. bar capacity: 42mm, max. machining diameter: 42mm, speed: 5000rpm, machining slides: 4, number of slides front/rear: 4/2. Machine dimensions X/Y/Z: approx. 7200mm/1700mm/2300mm, weight: approx. 10000kg. The machine has an electrical problem as a result of which the control does not start up. Documentation available. On site inspection is possible.
Travel X/Y/Z: 500mm/500mm/400mm, table dimensions X/Y: 460mm/800mm, tool holder: SK40, speed: 4000rpm, feed rate: 3m/min, rapid traverse: 5m/min, weight: approx. 2500kg. On-site inspection is possible.
A marking machine for folding cartons including an inkjet printer is available. 1) Off-line feeding and transport system KBA König & Bauer udaFormaxx, min. product dimensions X/Y: 30mm/60mm, max. product dimensions X/Y: 450mm/500mm, min. product grammage: 80g/m², max. product thickness: 8mm, max. transport speed: 90m/min, max. throughput capacity: approx. 250pieces/min. Machine dimensions X/Y/Z: approx. 1300mm/700mm/400mm, weight: approx. 150kg. 2) Continuous inkjet printer KBA alphaJET mondo, print lines: 5, vertical resolution: 32P, character height range: 2mm-15mm, max. printing speed: 780m/min, nozzle diameter: 62µm, machine dimensions X/Y/Z: approx. 500mm/350mm/300mm, weight: approx. 20kg. Including base frame. Documentation available. On-site inspection is possible.
The machine is in good technical condition, testing possible after prior agreement. Haidenhain 530 system.
The machine is in good technical condition, after prior agreement it is possible to test it. 3 axis machining center, X-axis repaired, bearing replacement, Y-axis bearing replacement. New Y-axis measurement
General Manufacturer: Monnier & Zahner Type: M651 Year of Make: 2007 Control: Fanuc Series 21i MB Travels: X 80 mm, Z 250 mm, A swivel axis +/-45°, W 250 mm Other axes: C-axis workpiece spindle, V-axis loader Working spindle Speed: 3,000 rpm Dimensions and weight Dimensions: 2,400 mm x 1,410 mm x 2,250 mm Weight: approx. 2,400 kg Condition Condition: Used Functional: Tested and fully functional
Pleiger hydraulic motor for Krauss Maffei MOS 3000-05-204 Krauss Maffei No. 6249672
Make: MAN Model: D2876LE423 Engine type: Four Stroke Direct Injection Cylinders: 6 Output: 588 kW Speed: 2300 rpm Mfg year: 2013 Condition: New and Unused.
Key data: 3020 mm, 1 mm
in good condition, POS 400 control with digital display, without stop system, with standard rail Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 3020 mm Sheet thickness steel: 1.5 mm Sheet thickness aluminum: 2.0 mm Blechdicke VA/sheet thickness Stainless 1.0 mm Colour: white/blue Dimensions: 3930 x 700 x 1175 mm Machine weight: 2120 kg Motor power: 0.55 kW Upper bolster stroke: 120 mm without cutting device for cutting to length Bending angle (max.: 145 degrees Machine number: 180928
General Manufacturer: Chiron Type: DZ 12 W Magnum high speed plus Control: Siemens 840D Year of Make: 2016 Travels: X 550 mm Y 400 mm Z 400 mm Rapid traverse X/Y/Z: 75 m/min Operating hours: 14,709 h Working spindle Speed: 20,000 rpm Torque: 29 Nm Power: 24 – 36 kW Tool holder: HSK 63A Double spindle spindle spacing: 250 mm Tool changing table Dimensions L/W: 660 x 950 mm Tool/movement Tool changer: 32-fold Dimensions and weight Weight: approx. 9,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Spindle coolers IKZ high-pressure system with belt filter Knoll KF150/500 Chip conveyor Probes Renishaw Oil mist extraction Blum Laser Measurement
Year of construction 2000 Control Siemens CNC 840D Drilling capacity 2.8 - 25 mm max. drilling depth 700 mm Clamping table 600 x 800 mm with hole grid Drill carriage: torque 20 Nm Travel distance 1000 mm Feed rate 0 - 15,000 mm Coolant frequency-controlled Ring Compact Filter 120l/min Accessories: Cantilever belt conveyor Weight approx. 3000 kg
B&A REF: 9170 TON: 50 SCREW DIAMETER: 14MM SHOT WEIGHT: 1 STROKE VOLUME: 1.1CM3 INJECTION PRESSURE: 2500AR PLATEN SIZES: 364 X 196MM MIN MOULD HEIGHT: 100MM MOULD OPENING STROKE: 200MM MAX DAYLIGHT: 300MM EJECTOR STROKE: 50MM CONTROLS: UNILOG B4
General Manufacturer: Chiron Type: DZ 08 W Magnum high speed Control: Siemens 840D Year of Make: 2015 Travel: X 450 mm Y 270 mm Z 310 mm Rapid traverse X/Y/Z: 75 m/min Working spindle Speed: 18,000 rpm Tool holder: HSK 40-A Tool/movement Tool changer: 16-speed Dimensions and weight Weight: approx. 3,600 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Workpiece changing table IKZ Coolant System with Belt Filter Knoll Chip conveyor Oil mist extraction Probes Blum Laser Measurement
General SKU340X780 MakeK-Tron TypeK2m-T35 No.11240198/800890 Year of constructionunknown Main Features MaterialStainless steel Motor0.45 KW Inlet diameter220 mm Specified Features - Metering screw MaterialStainless steel 1.4571 (316Ti) Metering screws Metering screwcheck Screw diameter35 mm Pitch50 mm Shaft diameter15 mm Screw length250 mm InletDia. 220 mm OutletDia. 110 mm With DC motor0,45kW, 200V, 2000RPM Without controlcheck Screw speed120-600rpm With breaking/mixing shaftcheck Information LocationBarneveld Floorspace0,85x0,45 m Total height0,4 m Weight50 kg CEcheckMetering screwsK Tron SoderDosing units > Metering screwsBrand > K Tron Soder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The ...
General SKU325X666 MakeFryma TypeMSM-32 No.M-14370/71 Year of construction1990 Mounted on framecheck Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume2.4 Ltr. Motor22 KW Specified Features - Sand mill Vertical sandmillcheck (Co-ball mill) Capacity2,4l Housing dimensions Dia. 350x210 mm InletDia. 30 mm OutletDia. 25 mm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Motor22 kW, 380/660 volt Rotor speedApprox 580 rpm Capacity180 l/h MaterialNimonic 2.4951 Information LocationBarneveld With switchcheck Floorspace1,10x1,30 m Total height1,76 mSand millsFrymaMills > Sand millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Bar ...
General SKU325W683 MakeMettler Toledo TypeFP82HT hot stage microscopy system LocationBarneveld Specified Features - Miscellaneous Motor100/120 volt, 230/240 volt Information Floor space0,31 x 0,48 m Total height0,15 m CEcheck Extra SpecificationsFP82HT is used to visually examine all kinds of thermal transitions when the sample is heated or cooled. The unit comes with the FP90 processorMiscellaneousMettler ToledoMiscellaneous > MiscellaneousBrand > Mettler Toledo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU268K299 MakeRomaco AG Fryma Koruma Rheinfelden TypeCoBall mill MS-50 No.75439/00 Year of construction2000 LocationBarneveld Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume9.8 Ltr. Motor55 KW Specified Features - Sand mill Vertical sandmillAnnular gap bead mill (1x) Capacity9,8 Ltr Housing dimensions dia. 520x300mm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Max. temperature80 Degr. C. Motor55,0 KW, 400/690 Volt (Ex) Capacity150-1000 Ltr/Hr MaterialStainless steel Information With switchcheck Floorspace2,1x1,0 M Total height2,3 M ATEX compatiblecheckSand millsRomacoMills > Sand millsBrand > Romaco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ...
Travel X/Y/Z: 600mm/700mm/800mm, resolution: 0.001mm, input resolution: 0.001mm, positioning tolerance: 0.01mm, feed rate: 15m/min, rapid traverse: 40m/min, speed: 18000rpm, power: 31kW, control: Heidenhain MillPlus. Documentation available. On-site inspection is possible.
Manufacturer: Mori Seiki Model NLX 2500 Y/700 Top condition Year of construction 2012 only approx. 6000 operating hours incl. 12 antr. WZ Holders + 17 Static WZ Holders Quick-change system from EWS Hollow clamping device KITAGAWA BB210A821 + KITAGAWA SS1881K21 for the main spindle Coolant system with increased pressure 5 bar Hinged belt conveyor, right ejection Integrated part catcher for main spindle I/F for bar replenishment, LNS Double foot switch with protective cover Signal light (red, yellow, green) Total Counter Workpiece counters EU Tool Holder Package SAUTER BMT60 (T32259, T32260, T32261, T32262) SKM253 MSQP Transformer 45.0 kVA 15 bar Grundfos pump incl. Hydac Filter Cantilever length for driven tools 100 mm (limited Y-axis travel) (Y, SY, SMC)
Mubea Hole Punch Model KL 750 Optima Year of manufacture 1990 fully functional Hebqowr Dk Rjxim Iqsfb Max. punching force 750 kn Triggering stroke via foot switch With very extensive tools, see photos
This machine is ideal for use in bakeries, restaurants, or grocery stores. It impresses with its robust construction, ease of use, and consistent slicing quality.
For sale is an A100 Vertical Form Fill Seal (VFFS) Packaging Machine, complete with: Inclined Infeed Conveyor (for product loading) Outfeed Conveyor (for efficient bag discharge and handling) This is a turnkey automated packing line suitable for a wide range of food and non-food applications. Features: A100 VFFS machine – fully automatic, forms, fills, and seals bags. Inclined infeed conveyor – ensures consistent and efficient product feeding. Outfeed conveyor – transports finished bags away from the sealing area. Stainless steel construction – hygienic and easy to clean, ideal for food production. Compact footprint – space-saving design. Control panel with emergency stop – user-friendly operation. Condition: Machine is in excellent condition and has been used only sparingly. Well maintained, clean, and ready for immedi ...
Used, fully functional ice cream maker Maximum capacity: 2.2 liters Ice cream ready in approximately 15 minutes 230 volts Air-cooled
GKS CP350 Automatic Food Packaging Machine (Vacuum seal Robot) A brand-new, unused, unopened and undamaged item in original retail packaging. Features: Automatic Power Source Electric Material Stainless Steel Food Compatibility Multifunctional Item Depth 1.205m Colour Blue Brand GKS Type Vacuum Sealer Voltage 240 V Item Height 1.67m Model CP350 Country/Region of Manufacture Germany Components Included Roll, Film Bag Item Width 962mm Power 1200 W
2007 Prefamac 30kg chocolate tempering machine with enrobing belt (with blower), offtake belt, vibrating table and 2x heating lamps.
NISSEI FREEZER soft serve ice cream machine Water-cooled 400 volts 2.5 kWh H 150 x W 54 x D 84 cm 250 kg
General SKU292X391 LocationBarneveld CEcheck MakeNetzsch TypePSI Mix Main Features MaterialStainless steel Volume15000 Ltr. Motor45 KW Specified Features - Inline mixer MaterialStainless steel 1.4829, Stainless steel 1.4301 (304) Inline high shear mixers Mixercheck CapacityUp to 5 m³/h Information No.2401393 Year of construction2005 Floor space1,90x1,60 m Total height2,20 m Weight2500 kg ATEX compatiblecheck Extra SpecificationsWith rotation valve, 29 rpm, Bartec control, type BAT 300, (Ex), : Burgmann refill unit, type spn2063, in and output: DN80 control cabinet (as is) Inline high shear mixersNetzschMixers > Inline high shear mixersBrand > Netzsch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The ...
General SKU366W1585 MakeServolift TypeHF LocationBarneveld CEcheck Main Features MaterialStainless steel Motor1.5 KW Height3000 mm Specified Features - Lifting/tilting machine MaterialStainless steel 1.4301 (304) Lifting machinecheck Lifting + tilting machinecheck Max. weight250 kg Lifting heightApprox 3 m With hydraulic unitcheck Motor1,5 kW, 230/400 volt, (Ex) Information No.10765 Year of construction2003 With switchcheck Floorspace1,0x0,80 m Total height5,40 m Weight540 kg ATEX compatiblecheckLifting/tilting machinesServoliftConveying systems > Lifting/tilting machinesBrand > Servolift What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machin ...
General SKU312X489 LocationBarneveld CEcheck MakeGörgens Main Features Motor60 KW Inlet diameter400 mm Width400 mm Specified Features - Fine Impact Mill Grindercheck Turbo millcheck Rotor sizeø 800 mm Grinding room size500 Ltr. Housing dimensions ø 900 x 843 mm Inlet400x120 mm Motor60 kW, 400 volt, 1485 rpm Speed1200 – 2100 rpm ± 10 % Fine Impact Mills MaterialStainless steel Information TypeG-90/4 model S No.1289 Year of construction2006 Mounted on framecheck Floor space1,35 x 2,195 m Total height1,66 m Weight4000 kg Extra SpecificationsOperating Conditions Air inlet temperature: :
Key data: 550 mm, 3 mm
Manufacturer: DATE Type: MN7-550U Year of Make: 2000 Max. sheet width: 550 mm Power: 3x200V, approx. 2.5kW Sheet thickness: approx. 0.3 – 3.2 mm Coil weight: up to 1–2 tons
Brand: Videojet Type: Inkt Jet Marking Machine Model: Excel 2000
Rotary Front- Back or 9/10'^ Wraparound Self Adhesive Labeller Machine Manufacturer: BRB Model: MEGA ADE 622 YOM: 2017 Label Stations: 2 Allen Bradley PLC/HMI Output: 3,200 containers per hour Rotary machine with carousel diameter of 480mm and 6 bottle platforms. Complete with; One set of bottle change parts One set of label parts 2 self adhesive stations CE safety guards 1 Extra set of can handling parts 1 Empty can pressurization system Labeller to run at 4,000 cph This is a SECOND HAND item and is sold as seen. For more information and more available stock please visit us at - advancedbrewing.co.uk
Mash tun 50BBL (9,000 litre vessel) Manufactured By Moeschle Stainless steel (1.4404) OD 3055mm ID 2850mm Overall height APPROX 2000mm Wedge wire Floor Top and side entry manway doors Manual Spent Grains removal Year of Manufacture: 2001 This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
GENERAL Project No.: 905817 Quantity: 1 pcs. Manufacturer: DMG MORI Type: MillTap 700 Control: Siemens 840 D solutionline Year of Make: 2020 Condition: Used machine Approx. (hrs): 8038 Spindle Approx (hrs): 1166 Program run approx. (hours): 1389 DESCRIPTION MILLING Travel in X 700 mm Travel in Y 420 mm Travel in Z 380 mm Max. rapid traverse speed in X/Y/Z 60/60/60 m/min Max. acceleration in X/Y/Z 10/10/18 m/s2 Direct displacement measurement system X/Y/Z Tool holder BT 30 Max. speed milling spindle 24000 1/min Max. power at ED 10-40/100% 16.3/6 kW Max torque at ED 10-40/100% 48/30 (78 max) Nm Disc tool magazine 25 stations Chip to chip time 1.7 s Machine table 840x420 mm OTHER EQUIPMENT IR Workpiece Probes Tool measurement by means of a probe Splash protection cladding with fully encapsulated working area Oil/Emulsion Mist Extraction System ...
B&A REF: 9024 TON: 160 SCREW DIAMETER: 50MM SHOT WEIGHT: 343 STROKE VOLUME: 377CM3 INJECTION PRESSURE: 1892AR PLATEN SIZES: 710 X 660MM DBTB: 520 X 470MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 500MM MOULD OPENING STROKE: 450MM MAX DAYLIGHT: 950MM EJECTOR STROKE: 150MM CONTROLS: MC6 CORE PULLING: 2 AIR VALVES: 2 HEATING CAPACITY: 17.7KW ROBOT INTERFACE: EUROMAP 67 ROBOT: GIEGER TECNOMATIC SCREW DRIVE: ELECTRIC HOT RUNNER: 12 ZONE
Parallel Lathe SCULFORT type MAXICAP SENIOR 380 x 4000 RN Between points: 4000 mm Maxi Ø on bench: Ø 780 mm Maxi Ø over saddle: Ø 580 mm (rear trolley dismantled) - Ø 500 mm (without rear trolley dismantled) Maxi diameter in brocken bed: Ø 1160 mm Width in brocken bed: 400 mm Spindle: Ø 80 mm Spindle speed: from 16 to 1280 RPM Square turret 3-jaws chuck Ø 400 mm Threadings: Metric + Withworth 3 points steady max Ø 350 mm Tailstock CM6 Motor power: 13 CV Feeds: auto transverse + longitudinal Clutch rapid used Lubricant tank Dimensions (L x W x H): 6500 x 1800 x 1900 mm Weight: approx 7 T
Grinding length: 600mm, grinding width: 250mm, table dimensions X/Y: 600mm/250mm, max. table speed: 22m/min, table height: 1020mm, grinding wheel dimensions X/Y/Z: 225mm/25mm/51mm. Machine dimensions X/Y/Z: approx. 1800mm/1100mm/1900mm, weight: approx. 1500kg. The machine was sealed about 5 years ago but currently shows a new leakage. Documentation available. An on-site inspection is possible.
1500L Mixing Vessel with Mixer Vertical stainless steel tank 1500L Gross Volume Manufacture: Unitstaal A/S Denmark Year of Manufacture: 2000 Diameter Approx 1350mm Height Approx 2300mm (Including Motor) Bottom Outlet DIN Butterfly Valve Top Manway Double Walled with Insulation Pressure Gauge on Top Sight Level Sight Tube Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
Suction Feeder, 2 Pockets, Compressor, Table Folding Machine
Flatpile Feeder, 1st Station: 4 Pockets, 2nd Station: 4 Pockets, 2 Knives, Delivery
Roundpile Feeder, 1st Station: 4 Pockets, 2nd Station: 4 Pockets, Delivery
maximum number of results exceeded
please refine your search
