m 3051 used for sale

CONTROLS   CNC controls FANUC 18 MB WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 4   .. among of them simultaneous CNC axes: 3   X-axis travel: 900 mm   Y-axis travel: 800 mm   Z-axis travel: 980 mm   rotating range B-axis from: 0 °   rotating range B-axis up to: 360 ° TABLE   table surface (left-right): 630 mm   table surface (front-back): 630 mm   workpiece load (max): 1200 kg SPINDLE / HEAD   spindle type: horizontal   spindle revolutions (max): 10000 /min AXIS DRIVES   rapid traverse: 50000 mm/min TOOL MAGAZINE   number of positions: 140 AUTOMATIC WORKLOAD EQUIPMENT   store type: table changer   number of store positions: 2 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 19000 kg ATTACHMENTS   chip conveyor: yes   coolant unit: yes   b ...

This 3-axis DECKEL MAHO DMF 220 Linear was manufactured in 2004. It features impressive travels of approximately 220 cm in the X-axis, 56 cm in the Y-axis, and 72 cm in the Z-axis. The machine has a maximum speed of around 18,000 rpm and includes a chip conveyor and coolant filter unit. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMF 220 Linear vertical machining centre we have for sale. Contact us for further details.

This 4-axis MORI SEIKI NH4000 DCG was manufactured in 2012. It features impressive travels of approximately 560 mm in both X and Y axes, and 630 mm in the Z axis. The machine has a maximum speed of around 14,000 rpm and includes a rotary table, CONSEP chip conveyor, and KNOLL coolant filter unit. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NH4000 DCG horizontal machining centre we have for sale. Contact us for further details.

This 3-axis DECKEL MAHO DMC 100 V was manufactured in 2001. It features impressive travels of approximately 1000 mm in the X-axis, 800 mm in the Y-axis, and 500 mm in the Z-axis. The machine boasts a maximum spindle speed of around 18,000 rpm and includes a KNOLL chip conveyor and coolant filter system. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 100 V vertical machining centre we have for sale. Contact us for further details.

This 4-axis MORI SEIKI NH4000 DCG was manufactured in 2011. It features impressive travels of approximately 560 mm in both X and Y axes, and 630 mm in the Z axis. The machine has a maximum spindle speed of 14,000 rpm and a robust table size of 400 x 400 mm, with a maximum table load of 400 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NH4000 DCG horizontal machining centre we have for sale. Contact us for further details.

This 4-axis MECAL MC 305 vertical machining centre was manufactured in 2008. It features an impressive X-axis travel of approximately 7200 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The machine is equipped with a powerful 5.5 kW electrospindle and a maximum spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the MECAL MC 305 machine we have for sale. Contact us for further details.

This 3-axis MIKRON VF 3 vertical machining center was manufactured in 1998. It features a table size of 460 × 1,220 mm, with X-axis travel of 1,016 mm, Y-axis travel of 508 mm, and Z-axis travel of 653 mm. If you are looking to get high-quality milling capabilities, consider the MIKRON VF 3 machine we have for sale. Contact us for more information.

This 5-axis Matsuura MAM 72-63 V was manufactured in 2008. It features impressive travels with an X-axis of 760 mm, Y-axis of 845 mm, and Z-axis of 610 mm. The machine includes a maximum workpiece capacity of Ø800 mm × 450 mm height and a tool magazine with 150 positions. If you are looking to get high-quality machining capabilities, consider the Matsuura MAM 72-63 V vertical machining centre we have for sale. Contact us for further details.

This 5-axis Matec 30 HV vertical machining centre was manufactured in 2012. It features a generous X-axis travel of 3000 mm, Y-axis travel of 800 mm, and Z-axis travel of 800 mm (horizontal). The machine is equipped with a powerful motor spindle, capable of speeds up to 9000 rpm, and a maximum table load of approximately 2500 kg. If you are looking to get high-quality machining capabilities, consider the Matec 30 HV machine we have for sale. Contact us for further details.

Ethos X Microwave Extraction -Currency: MYR PIC: - Ms. Fatimah (013 628 7197/ fatimah_asmadtopglove.com.my) - Ms, Farha ( 01111936236/ nurfarha_atopglove.com.my)

This 5-axis DMG DECKEL MAHO DMU 80P duoBLOCK was manufactured in 2009. It features impressive axis travels with X-axis at 800 mm, Y-axis at 1050 mm, and Z-axis at 850 mm. The machine includes a robust table size of Ø 900 × 700 mm and a maximum workpiece weight capacity of 1800 kg. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 80P duoBLOCK vertical machining centre we have for sale. Contact us for further details.

This 3-axis Makino SNC 64-A15 was manufactured in 2001. It features a main spindle speed ranging from 300 to 30,000 rpm and a spindle motor power of 15 kW. The machine is equipped with a tool magazine holding 15 positions and offers a feed rate of up to 16,000 mm/min. If you are looking to get high-quality graphite and metal machining capabilities, consider the Makino SNC 64-A15 vertical machining centre we have for sale. Contact us for further details.

Ref. №: 4104 Automatic belt skinning machine Cutting width: 370 mm Width: 800 mm Depth with conveyor belts: 1850 mm Height: 1200 mm Electrical connection: 0,75 kW, 400V/50Hz/3ACV

Coming for sale : TOS Hol Monta UB85/6000 CNC , 2014 Under power less used and very good condition

Travel distance: X= 600, Y= 400, Z= 400 mm Table size: 900 x 480 mm Spindle speed: 40 - 4,000 1/min Dimensions LxWxH: 2500 x 2200 x 2200 mm Weight: approx. 3,000 kg

This 3-axis MAKA DC 3 was manufactured in 2016. It features a spindle speed range of 18,000 rpm and impressive axis travels of 1645 mm in the X-axis, 1760 mm in the Y-axis, and 600 mm in the Z-axis. The machine includes a table size of 1200 x 1400 mm and a tool magazine capacity of 24 tools. If you are looking to get high-quality machining capabilities, consider the MAKA DC 3 vertical machining centre we have for sale. Contact us for further details.

This 3-axis DECKEL MAHO DMC 635 V was manufactured in 2006. It features an X-axis travel of approximately 635 mm and operates on a supply voltage of 400 V, 3-phase. With a rated power of 35 kVA, this vertical machining centre is designed for efficient performance. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 635 V machine we have for sale. Contact us for further details.

This 3-axis DAH LIH MCV2600 was manufactured in 2006. It features an impressive X-axis travel of 2600 mm, Y-axis travel of 870 mm, and Z-axis travel of 760 mm. The machine includes a robust table size of 2800 x 970 mm and a maximum speed of 6000 rpm. If you are looking to get high-quality machining capabilities, consider the DAH LIH MCV2600 vertical machining centre we have for sale. Contact us for further details.

BIG Merlo ZM2 adapter for three-point hitch,  with adjustable lower link jaw hooks and detachable drawbar, Own weight approx. 190 kg, KAT 3

This 4-axis Matec 30 HV CNC was manufactured in 1997. It features an impressive X-axis travel of 4000 mm, Y-axis travel of 600 mm, and Z-axis travel of 800 mm. The machine is equipped with a powerful 10 kW drive and a tool changer with 36 magazine positions. If you are looking to get high-quality machining capabilities, consider the Matec 30 HV CNC vertical machining centre we have for sale. Contact us for further details.

This 4-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2002. It features a travel of 640 mm on the X-axis, 600 mm on the Y-axis, and 500 mm on the Z-axis. The machine has a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMC 64V linear vertical machining centre we have for sale. Contact us for further details.

BIG adapter Manitou on three-point hitch, - with adjustable lower link hooks and removable hitch, - Net weight approx. 190 kg

BIG adapter Manitou on three-point hitch, - with adjustable lower link hooks and removable trailer coupling, - Net weight approx. 190 kg, - KAT 3

This 4-axis BW MCX750 M2 was manufactured in 2011. It features a substantial X-axis travel of 1100 mm, Y-axis travel of 900 mm, and Z-axis travel of 1250 mm. The machine has a maximum pallet load of 1500 kg and a magazine capacity of 240 positions. The machine is linked to a BW MCX750 M2 (2011) and a pallet magazine and set-up station (12 positions + 2 positions per machine + 2 set-up stations) .gindumac.de/produkt/bw-mcx750-m2_DE-MIL-BWX-2011-00001 Contact us for further details.

This 4-axis BW MCX750 M1 was manufactured in 2006. It features an impressive X-axis travel of 1100 mm, Y-axis travel of 900 mm, and Z-axis travel of 1250 mm. The machine has a maximum pallet load of 1500 kg and a magazine capacity of 144 positions. The machine is linked to a BW MCX750 M2 (2011) and a pallet magazine and set-up station (12 positions + 2 positions per machine + 2 set-up stations) .gindumac.de/produkt/bw-mcx750-m2_DE-MIL-BWX-2011-00001 Contact us for further details.

This 5-axis Breton Matrix WM 800 K25 was manufactured in 2003. It features a substantial table dimension of 2000 x 3000 mm and impressive axes strokes of 2000 mm in X, 2500 mm in Y, and 800 mm in Z. The machine has a maximum rotation speed of 24000 rpm and a rapid forward speed of 40 m/min. If you are looking to get high-quality milling capabilities, consider the Breton Matrix WM 800 K25 gantry milling machine we have for sale. Contact us for further details.

This 5-axis EMCO MAXXMILL 350 was manufactured in 2017. It features a travel of 350 mm in the X-axis, 250 mm in the Y-axis, and 300 mm in the Z-axis. The machine is equipped with a spindle speed of 12,000 rpm and a tool magazine with 50 positions. If you are looking to get high-quality machining capabilities, consider the EMCO MAXXMILL 350 vertical machining centre we have for sale. Contact us for further details.

Key data: 16000 , 8825 , 140

Presse à injecter HAITIAN 1600 T type MARS MA 16000/15800 Force de fermeture : 16 000 KN Année : 2011 Course d’ouverture moule : 1600 mm Epaisseur moule min / max : 700 / 1500 mm Course d’ouverture max des plateaux. : 3100 mm Distance entre colonnes : 1550 x 1430 mm Dimensions des plateaux : 2230 x 2120 mm Course d’éjection : 400 mm Force d’éjection : 318 KN Diamètre vis : 150 mm Volume théorique d'injection: 11 133 cm3 Poids de l’injection en PS : 10 131 gr Rapport L/D : 20,8 Pression d’injection max. : 149 MPA Capacité de plastification : 220 gr/sec Vitesse d’injection : 1527 gr/sec Vitesse rotation vis : 102 tour/min Puissance chauffe. : 122 KW Puissance moteur électrique: 65 + 65 + 45 Quantité d’huile dans réservoir : 1610 litres Dimensions : 15,2 x 4,5 x 4,5 m Poids total : 107 T

This 3-axis TBI MVC 1890 was manufactured in 2013. It features a robust cast iron body, cross-slide table design, and slideway guides on all axes for enhanced rigidity and precision. Key specs include a Heidenhain CNC control, SK40 spindle taper, and a maximum spindle speed of 12000 rpm. It also boasts a 24-position automatic tool changer and integrated chip conveyor. Consider the opportunity to buy this TBI MVC 1890 vertical machining centre. Contact us for more information.

This 5-axis DECKEL MAHO DMC 60U was manufactured in 2004. It features a spindle speed of 12,000 rpm and a tool magazine with 60 positions, enhancing its versatility for various machining tasks. The Y-axis was replaced in 2023, ensuring improved performance. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 60U universal machining centre we have for sale. Contact us for further details.

This 5-axis DMG MORI DMU 60 EVO was manufactured in 2017. It features a Heidenhain iTNC 640 control, a spindle speed of 20000 rpm, and a 120-fold tool changer. The machine includes a chip conveyor, coolant system, and an internal coolant supply of 40bar. Its well-suited for high-precision machining tasks. Consider the opportunity to buy this DMG MORI DMU 60 EVO vertical machining centre. Contact us for more information about this machine.

This 5-axis DECKEL MAHO DMF 260/11 was manufactured in 2014. It features an impressive X-axis travel of 2600 mm, Y-axis travel of 1100 mm, and Z-axis travel of 900 mm. The machine is equipped with a vertical motor spindle with a spindle speed range of 20 – 8000 rpm and a tool magazine capacity of 30 tools. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMF 260/11 universal machining centre. Contact us for further details.

STM WS 3015 MasterCut 2D waterjet cutting machine was built in 2013 in Germany by STM STEIN-MOSER GmbH. The machine has been regularly maintained throughout its service life, which means that it is in very good technical condition and ready for further use. The STM WS 3015 MasterCut 2D is an extremely versatile machine for precision machining of a wide range of materials, i.e. metal, plastics and glass. It is distinguished by the use of modern components and a robust design, which remains stable even under the most demanding challenges. The machining process is performed by a numerically-controlled workhead, which moves in three axes X,Y,Z with feeds of 3002 mm, 1502 mm and 180 mm respectively. Only water or water with an abrasive additive is used for cutting, making the process free of harmful fumes and safe for the environment. The use of waterjet cutting technology in production gu ...

Centerless grinding machine manufactured in 2008. This DANOBAT 327 MDA features a maximum wheel width for plunge grinding of 500 mm and a peripheral wheel speed of 50 m/s. It has a grinding wheel motor power of 55 kW and a regulating wheel speed that is infinitely variable from 10 to 225 min⁻¹. If you are looking to get high-quality grinding capabilities, consider the DANOBAT 327 MDA machine we have for sale. Contact us for further details.

Offer 25087 Technical data: - Max. working width 3040 mm - max. material thickness at 40 kg / mm² strength 4 mm - Bending angle adjustment electronically pre-selectable - Automatic follow-up control for a complete workflow - Highest working setting of the upper beam 250 mm - Largest opening width / stroke of the upper beam 350 mm - Height adjustability - bending beam 30 mm - The lower beam 100 mm - Upper beam drive 400 V / 1.5 kW - Bending beam drive 400 V / 5.5 kW - E-foot button - Cambering in the bending beam rail - Space requirement approx. W 4450 x H 1650 x D 2300 mm - Weight approx. 6800 kg

Metal Band Saw manufactured in 2014. This Macc 381 AV features fully automatic operation, a hydraulic clamping vice, and a coolant system. It has a cutting capacity for round material up to 280 mm and square material up to 290 x 290 mm. The machine includes a chip conveyor and a numerical control system for enhanced efficiency. If you are looking to get high-quality cutting capabilities, consider the Macc 381 AV machine we have for sale. Contact us for further details.

This 3-axis Flow Kent Mach 2 C was manufactured in 2014. It features a working area of 3000 x 2000 mm and operates with a maximum pressure of 60,000 PSI. The machine is equipped with a powerful 75 kW pump and utilizes abrasive waterjet cutting technology. If you are looking to get high-quality cutting capabilities, consider the Flow Kent Mach 2 C CNC waterjet cutting system we have for sale. Contact us for further details.

This 3-axis MicroStep 3001.15P/ME plasma cutting machine was manufactured in 2021. It features a working area of 1500x3000mm, ideal for precise and large-scale cutting tasks. If you are looking to get high-quality cutting capabilities, consider the MicroStep 3001.15P/ME machine we have for sale. Contact us for more information.

CNC shearing machine manufactured in 2022. This Metallkraft MTBS 2100-40 B features a cutting length of 2100 mm and a motor power of 7.5 kW. It can handle a maximum sheet thickness of 4 mm at 400 N/mm². If you are looking to get high-quality shearing capabilities, consider the Metallkraft MTBS 2100-40 B machine we have for sale. Contact us for further details.

This 3-axis Mitutoyo QV-L404Z1L-D was manufactured in 2020. It features an X-axis travel of 400 mm, Y-axis travel of 400 mm, and Z-axis travel of 200 mm. The machine is equipped with advanced measurement capabilities, including video and touch probe measurement methods. If you are looking to get high-quality measurement capabilities, consider the Mitutoyo QV-L404Z1L-D CMM machine we have for sale. Contact us for further details.

This 5-axis Mitutoyo Crysta-Apex C9206 was manufactured in 2006. It features an impressive X-axis travel of 905 mm, Y-axis travel of 2005 mm, and Z-axis travel of 605 mm. The machine includes a measuring table size of 1080 x 2720 mm, providing ample space for various applications. If you are looking to get high-quality measurement capabilities, consider the Mitutoyo Crysta-Apex C9206 CMM machine we have for sale. Contact us for further details.

This 3-axis Krauss Maffei 1600-17200MC hydraulic injection moulding machine was manufactured in 2001. It features a clamping force of 16,000 kN and a screw diameter of 125 mm. The machine has a maximum shot weight of 7450 g and a platen size of 2600 x 2110 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1600-17200MC machine we have for sale. Contact us for further details.

This 6-axis Krauss Maffei 1000-8000 M hydraulic injection moulding machine was manufactured in 1997. It features a maximum X-axis travel of 1000 mm, Y-axis travel of 1400 mm, and Z-axis travel of 3500 mm. The machine includes an injection pressure limit of 185 bar and a metering stroke of approximately 465 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1000-8000 M machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2002. This Krauss Maffei 1300-12000 MC features a screw diameter of 105 mm and a maximum processing temperature of 450°C. It includes a hydraulic mechanical 2 platen clamping system and a robust motor current of 261 A. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1300-12000 MC machine we have for sale. Contact us for further details.

This Krauss Maffei KM 350-3000 was manufactured in 2003. It features a clamping force of 3500 kN and a maximum opening stroke of 920 mm. The machine is capable of processing various materials including PA, PP, PE, and ABS. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 350-3000 hydraulic injection moulding machine we have for sale. Contact us for further details.

This Krauss Maffei KM 800-6100MX was manufactured in 2007. It features a clamping force of 8000 kN and an injection volume of 2695 cm³, making it suitable for various materials such as PA, PP, PE, and ABS. The machine is equipped with a Wittmann Robot System for enhanced handling capabilities. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 800-6100MX hydraulic injection moulding machine we have for sale. Contact us for further details.

This 3-axis ALESA MONTI MAF45 was manufactured in 1992. It features an impressive X-axis travel of 1,900 mm, Y-axis travel of 1,000 mm, and Z-axis travel of 700 mm. The machine is equipped with a universal head and has a maximum spindle speed of 2,000 rpm. If you are looking to get high-quality machining capabilities, consider the ALESA MONTI MAF45 horizontal machining centre we have for sale. Contact us for further details.

Cone wrapping machine HWM 500 4C for all spears such as Kornspitz, pretzels and pretzel sticks, etc. Universal - Winding machine with infeed belt 1 man waitress for all doughs for wrapping Cone wrapping machine with 500 mm belt width only DGUV V3 tested by us Connection 400V, 16A-CEE plug NEW Machine & SAB Tested with warranty + spare parts service

Tool milling machine Maho, 700C Control : Maho 432, Year of construction 1989, Mounting SK40, Process : X-700, Y-450, Z-500, quill Machine can no longer be viewed under power. Has lost parameters! Would also sell spare parts, table, milling head, drives, control, ...

Tool milling machine Maho, 700C Control : Maho 432, Year of construction 1989, Mounting SK40, Process : X-700, Y-450, Z-500, quill Machine can no longer be viewed under power. Has lost parameters! Would also sell spare parts, table, milling head, drives, control, ...