129,523 used machines on RESALE, but how to find them? Machine Search
Frozen meat slicer Magurit 152, Electrics and hydraulics completely overhauled, Connection 400V, 4kW, year of construction 1991, Dimensions LxWxH approx. 185x75x138cm, weight approx. 390kg, very good condition, fully functional
Key data: 800 mm
Technical details are on picture. Parts shown by hand not come.
Key data: 450 mm, 270 mm, 310 mm
Chiron FZ08KS Magnum, NC machine: 3-axle Workbench: Length [mm]: 770, Width [mm]: 290 Table information: Rigid table with chip tray for optimal chip fall for wet and dry machining Clamping area: 770mm x 290mm with raster drilling pattern M16 x 15H7 x 50mm Table load: max. 500 kg Rapid traverse: X and Y axis 40m/min, Z axis 60m/min Max. speed [rpm]: 1500 Dimensions/Weight: Length [m]: 2,308, Width [m]: 1,405, Height [m]: 2,447 Total weight [Kg]: 3400 Electronics: Control Type: Siemens CNC Control 84OD PCU 50 / NCU 572.4, 6 measuring circuits, 1 channel incl. 10.4" TFT color screen / full keyboard OPO10S Windows NT Control Panel Logic NO RAM 256KB Machine connection: Voltage [V]: 400 / 230V t 107o - 50Hz/N/PE Frequency [Hz]: 50/60Hz Type of current: three-phase current Power: 13kVA Remark Accessories: Pressure monitoring of internal cooling
Technical data shown on picture. Parts shown by hand not come.
X-axis: 320mm, Y-axis: 400mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power.
X-axis: 500mm, Y-axis: 230mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power.
Longitudinal movement of the table manual drive: 750mm, longitudinal movement of the table hydraulic drive: 730mm, transverse movement of the table manual drive: 300mm, transverse movement of the table hydraulic drive: 290mm, usable surface of the table: 700x250mm, number of T-slots: 3, width of T-slots: 14mm, vertical movement of the grinding head: 400mm, division value of the grinding head manual drive: 0.01mm, distance between the inside of the grinding wheel and the column: 347.5mm, clearance under the new grinding wheel: 355mm, maximum grinding wheel diameter: 305mm, minimum grinding wheel diameter: 230mm, grinding wheel width: 25mm, grinding wheel bore: 127mm, division value of the cross table manual drive: 0.02mm, longitudinal feed of the table hydraulically: 2-25m/min, cross feed of the table stepwise, hydraulic and adjustable: 2-16mm/stroke, cross feed of the support hydraulical ...
Krones Sleevematic – Multireel – Shrinkmat Sleeve Labeling System Complete shrink sleeve labeling solution combining three advanced Krones technologies into a fully integrated system for the decoration and labeling of PET and glass containers. The system ensures high precision, continuous operation, and maximum production efficiency in modern beverage bottling lines. General Information - Manufacturer: Krones - System Type: Shrink sleeve application and shrinking system - Maximum Capacity: up to 39,000 bottles per hour - Bottle Sizes: 250 ml – 1,500 ml - Container Types: PET and glass bottles Delivery Scope - The system includes the following equipment: - 1 × Krones Sleevematic TS - 1 × Krones Multireel S - 1 × Krones Shrinkmat System Components Krones Sleevematic TS - High-performance sleeve applicator designed for precise application of shrink sleeves on ...
X-axis: 3050mm, Y-axis: 2050mm, Z-axis: 120mm, wavelength: 9.3-11.5µm, laser power: 300W, laser class: 1, operating pressure: 2bar, control: Beckhoff TwinCAT, length: 5050mm, width: 2950mm, weight: 3.8t, with CO2 laser Rofin Sinar SCX 30 HP 16.6, year of manufacture: 2022. An on-site inspection is possible.
plate thickness: 2.5 mm throat: 260 mm distance between roll centers: 92.0 mm weight: 295 kg range L-W-H: 1200 x 700 x 1200 mm Exhibition machine from 2021 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - 3x pairs of beading and flanging rollers included in delivery - robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts - Clearly arranged switching elements - Base frame equipped with storage compartment - powerful drive motor, even under continuous load - mobile foot switch for clockwise and counterclockwise rotation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Height=2.2 m, Overall length= 1.2 m, Overall width= 10.5 m, Net weight= 4000 kg,
Capacity plate width up to 3000 mm thickness 22 mm plate prebend 18 mm dual prepinch technical data: -length of rolls 3100 mm -top roll dia. 350mm -lower roll dia. 330mm -Hydraulic power unit with 20Hp motor -Electric supply Vac 400/50 – 480/60 Configuration complete: -Hardened surface of the 4 rolls -Conical plate bend hydraulic attachment. -hydraulic power driven rolls rotation with gear unit axial each -Synchronized hydraulic power dragging . -front open drop-end to remove closed shells. -Calibration re-rolling feature for welded shells Safety configuration in compliance. Control console electric commands with digital readout Predisposed ready to connect nr. 1 central hydraulic support for large dia. nr. 1 side arm hydraulic to hold in place think plate sheet being formed
Centerless grinding machine, ROSSI MONZA 400 Grinding wheel width 200mm Grinding wheel diameter 400 pneumatic compensation under power in our warehouse in Gussago BS (Italy) Centerless grinding is a procedure for grinding cylindrical bodies and is used for the mass production of rollers cylinders, tapered rollers, jet needles, pump pistons, hydraulic sliders, crosses, tips, etc. During centerless plunge grinding (plunge grinding), the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, grinding wheels and setting discs have a negative workpiece profile to work which is given to them with the aid of a tool. Centerless through-feed grinding or through-feed grinding and longitudinal grinding: workpieces to be machined proceed continuously with axial feed through the grinding gap., Grinding wheel width: 200, Grinding wheel diameter: 400
A tray sealer MetalTech is available. Materials: plastic trays/aluminium trays, max. tray dimensions X/Y: 325mm/265mm. An on-site inspection is possible.
X-travel 420 mm YWeg 270 mm Table size 254 x 482 mm Projection 254 / 318 mm Grinding spindle speeds 12 - 60,000 rpm Spindle stroke 92 mm Spindle speeds 90, 136, 184, 280 rpm Stroke rate, adjustable 2 - 120 strokes at 51 mm Accuracy 1.25 μm at 30 mm Compressed air connection 7 bar Machine weight approx. 1700 kg Dimensions approx. 1.45 x 1.2 x 2.4 m
Inv. Num. : 8638 Type: SPU 20 Producer: MAS Created: 1995 Parameters: Control system: Siemens Maximum turning length: 700 mm Maximum turning diameter over bed: 600 mm Maximum turning diameter over support: 380 mm
Maja ice silo with built-in screw conveyor SA 21, incl. Bizerba floor scale, very good condition, capacity 2 to
JUARISTI MDR 205 - CNC Plate Boring Mill Year of construction : 1992 Electrical & Electronics Overhaul : 2024 Spindle : 205 mm ( Ø ) ISO 50 X : 8,000 mm Y : 3,000 mm W : 1,250 mm ( spindle ) Z : 500 mm (tower) Z1 : 2,000 mm (table) CNC turntable : 3,000 x 2000 mm – 30 T Spindle speed : 900 rpm Spindle motor : 34 kW Total power : 74 kW Machine weight : 100 T (approx.) Control : FAGOR 8055 Angular Translation Head Base plate : 2,060 mm x 3,210mm (3 pieces) Conveyor
MOWEG (NILES) DKZ 4000 -UNIVERSAL CAROUSEL LATHE Year of construction : 1977 Chuck diameter : 3,500 mm Max. swivel range : 4,000 mm Max. turning height : 2,000 mm Max. table load : 20 T Column travel : 1,250 mm With digital display
MAchine is in good working condition.
400 V - 50 Hz, Power (KVA): 870, Working hours: 16006
Process: centerless plunge grinding, max. workpiece diameter: 20mm, max. workpiece length: 80mm, without automation by vibratory bowl. An on-site inspection is possible.
Rühle MKR130 Tumbler used Machine is completely made of stainless steel Mixing arm can be dismantled without tools via bayonet Mixing, batching and rumbling under vacuum and cooled Fully functional must be cleaned thoroughly before use, as protein deposits are present only the red wiper rubber is missing on the pile arm and the left side part was slashed (see photos) Video about test run available
Machine de mesure tridimensionnelle Marque Renault SEIV type portique CNC Dimensions : 2000 x 1500 mm Courses en X : 1480 mm Courses en Y : 1180. mm Courses en Z. : 890 mm Elle est composée d'une table n marbre , de 3 liaisons glissières , d'un pupitre de commande , d'une commande numérique et d'un palpeur .
Used Capping Machine AVE 6T up to 7000 bph The used capping machine AVE 6T up to 7000 bph delivers high efficiency and versatility for the bottling industry. Specifically, it handles medium to high-speed production lines, ensuring consistent and reliable results. Furthermore, the machine for Stelvin Lux uses six capping heads to provide precise and uniform operation throughout every bottling cycle. Moreover, its design maximizes production speed, enabling the handling of up to 7000 bottles per hour. This performance, in turn, supports businesses aiming to improve operational efficiency and maintain consistent product quality. The system supports aluminum screw caps of the Stelvin Lux type, measuring 30×60 mm. Consequently, this cap type creates an airtight seal, preserving product integrity and extending shelf life. Producers in the wine and beverage industry often choose this forma ...
DOSITECNO MONOBLOC DZPN/DRC dosing and filling machine for cosmetic products (creams) for sale. Year 2005. Special for creams (cosmetic). INOX AISI 304 bench. Bucket tape for different formats. Gear pumps with double tank. Double shutter positioning. Plug table with pick & place. Capper with electromotor. Safety controls: presence of packaging, shutter and cap. Formats: 15, 25, 50, 75, 100, 275, 500 and 1000 ml. 2 filling nozzles, the second for 1000 ml. Max. speed: 25 units/minute. Tooling and different formats available. Power: 7.5 kW. Serial number: 210218. With CE Certificate and documentation available.
Used twin-screw mixer made by Müllner & LUX KG, type LM 40. New 1990. Two motors 7,5 kW.
Injection moulding machine Engel e-motion 2440/380 T BJ 2008
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmMax. Turning Length1200 mmTurning diameter500 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment8 ...
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmBar diameter max.65 mmMax. Turning Length1200 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperCapto C6 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22 kWTorque ...
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.75 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 ...
approx. 221 pieces corlettes / multi-box, width 2m/ 2.50m / 2.70m, partly stackable - used - : Prices (net) per piece from location: 149.-€ Price (net) Type 3 – stackable: 169.-€, per piece ex location! Manufacturer: Cordes und Koch Type: Corlette / Multi Box Dimensions (L × W × H in cm) Type 1 = 13 pieces (complete sale only) 250 x 115 x 180 Color: Blue Type 2 = 2 pieces 270 x 115 x 240 Colour: green Type 3 = 192 pieces, of which approx. 62 pieces can be stacked Minimum order: 10 pieces 200 x 115 x 180 Colour: blue Type 4 = 14 pieces (complete sale only) 270 x 115 x 188 Colour: green Condition: good Available: immediately Location: 63128 Dietzenbach
Injection moulding machine Krauss Maffei KM 50/90 C2 BJ 2001
Control Philips CNC 432 Travels X/Y/Z 600 x 400 x 450 mm Spindle speed 4,000 min-1 20-cavity tool magazine SK 40 4th Lehmann axis
Horizontal CNC lathe with double spindle and two working spaces. Muratec MW 40 Year of Make: 2017 Original price: 260.000,- € net Current leasing rate: 2,678 € LNS FOX Spray Cabine, built in 2017 SPECIFICATIONS Machine Type: Lathe Front Spindle Construction: horizontal lathe Chuck size: 135 mm (5 inches) Number of spindles: 2 pieces Turret: 2 à 10 stations Spindle speed: 10,000 rpm Drive power: 3.7 / 2.2 kW
MBO T 530-2 2nd Folding Unit; Condition as is; Working width 530mm; 4 fold pockets; Knife shaft. Folding machine MBO T530-2 secound unit; condition as is; working width 530mm; four pockets; knife roller.
Yamato 714 Multihead Weigher, Fully Stainless Steel | Rigidized | Optional RCU810A Upgrade | Deep-Freeze Ready, Looking for a high-performance weighing solution for frozen or hard products? This Yamato 714 is a fully stainless steel, rigidized multihead weigher built for demanding production environments., Its flat feed chutes make it ideal for deep-freeze and hard items, preventing sticking or jamming. Optionally, we offer versions with angled chutes for lighter products such as vegetables., The machine has been fully overhauled, thoroughly inspected, and is ready for immediate operation., ---------------------------------------------------------------, Specifications – Yamato 714, Weighing Heads - 14 heads, Weighing Range ~20 g up to 3,000 g (single dump); multi-dump possible, Speed - Up to 90 weighings per minute (product dependent), Chute Type - Flat chutes (ideal for frozen/ha ...
Height=1.97 m, Overall length= 1.1 m, Overall width= 7.3 m, Net weight= 2600 kg,
Folding machine MBO T530-1-53/4 F, 4 pockets, counter, compressor, 2nd folding unit 4 pockets, 1 bar, machine number X02/22, in good condition, immediately available WITHOUT DISPLAY If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
5 identical welding machines are available. Mains voltage: 400V 50/60Hz, fuse: 25A, power consumption: 22kVA, cos phi: 0.8, setting range: 40-400A, working voltage: 16-34V, open circuit voltage: 19-55V, voltage steps: 2x12. Duty cycle at 40°C: 60 percent at 360A 32V, 100 percent at 250A 26.5V. Protection class: IP23, insulation class: H 180°C, cooling type: F. Weight gas cooled: 153kg, water cooled: 161kg. Length: 1040mm, width: 460mm, height: 935mm. Two coarse steps, 12 fine steps, high performance 4 roll wire feeder 140W, feeding speed: 0.5-24m/min, wire diameter: 0.8-1.6mm, 2 choke outputs for adjustment to the welding task. Control MC 15 as a compact easily exchangeable control box. Functions: wire feed speed constant control, wire creep, burn back time, 2 stroke and 4 stroke, wire inching without current and gas, low noise fan thermostat controlled for gas cooled units, thermal ov ...
Cabin dimensions X/Y/Z: 3500mm/3500mm/2500mm, door dimensions X/Y: 2800mm/2200mm, small door dimensions X/Y: 1000mm/2000mm, illumination: approx. 750Lux, rotary table diameter range: 1000mm/2500mm, max. workpiece height: 300mm, max. table load (centered): 300kg, horizontal stroke: 2800mm, vertical stroke: 400mm, nozzles: 3. Pressure blasting pot volume: 200l, operating pressure: 8bar, deduster air volume flow 1: 1800m³/h, filter area 1: 17m², deduster air volume flow 2: 3600m³/h, filter area 2: 30m². Overall system dimensions X/Y/Z: approx. 3660mm/3660mm/2650mm, control: Siemens KTP700. Documentation available. An on-site inspection is possible.
X-axis: 400mm, Y-axis: 250mm, Z-axis: 200mm, table dimensions: 560x426mm, acceleration: 500mm/s², resolution: 0.1μm, measuring temperature: 20 ±0.5°C, max. workpiece weight: 50kg. Length: 930mm, width: 870mm, height: 1570mm, weight: 530kg. On-site inspection is possible.
Height=1.24 m, Overall length= 0.85 m, Overall width= 1.75 m, Net weight= 255 kg,
Height=0.81 m, Overall length= 1.75 m, Overall width= 1.03 m, Net weight= 510 kg,
Manufacturer: König Maschinen Gessellschaft m.b.h. Austria Type: KGV Combi 2000 / 40, ( DD ) – RR 800- K5-SA5- SP5-FS-VO-MO (WB) 800-ABI 800 Year of manufacture: 2001 Control panel: Siemens Simatic The plant is controlled by a control panel with visual display Electricity: 3 x 400 V, 50 Hz, 13.5 kW Dimensions: Total length 11 meters The line is intended for the continuous production of weighed dough pieces which are automatically transferred from the main machine. ( Rex Automat ) The machine offers the following functions: - Rex automatic weighing and reception of the kneaded dough pieces. - Proofing in controlled air conditioning - Shaping of dough pieces, e.g. long rolling - Cutting of dough pieces - Flouring of dough pieces - Patterning of dough pieces - Seeding of dough pieces, e.g. sesame seeds, poppy seeds, sunflower seeds, etc. - Transfer of dough pieces to ...
Automatic bottling line Made in Germany by Mewes. Stainless steel frame and conveyor. 4-nozzles, volume 500 ml / cylinder, piston-operated machine Descending nozzles, bottom filling machine Speed, 2,000 to 3,000 bottles/hour depending on the product last run with 100 ml bottle 4,000 pcs / hour Capping machine
Digital 3D edge scanner MarTest 802 EW Working Areas X, Y, Z -Axis: - 2 to 4 mm Dffernschrittwert_mm: 0.005
Manufacturer: Krauss Maffei Model: 800-5700 MC Year of Manufacture: 1999 Technical Data - Clamping Force: 8000 kN - Platen Size: 1600 × 1510 mm - Tie Bar Distance: 1120 × 1000 mm - Mold Height: 600 – 1100 mm - Daylight (Platen Opening): 2000 mm - Total operating hours (machine switched on) : currently 02,193.40 - Operating hours in production : currently 82,849.13 - Heating Capacity: 59 kW - Control: MC4 Injection Unit - Screw Diameter: 105 mm - Shot Volume: 3611 cm³ - Injection Pressure: 1580 bar - Dimensions (L×W×H): 10.15 × 2.86 × 2.40 m - Pump Drive Power: 110 kW - Oil Tank Capacity: 2000 L - Machine Weight: approx. 45 tons Features / Extras - 8 temperature control zones + 2 additional zones for plasticizing heating - 4 core pulls with movable platen - Hydraulic rotary bolt shut-off nozzle (HSVS) - Air valve (1x on movable platen, WAP) - T-slots in clamping plates ac ...
USED VERTICAL MIXER, constructed in sturdy carbon steel, Total height 3.400 mm., Diameter 1.300 mm., Legs 2.150 mm., Barrel height 1.250 mm., Cone height 750 mm., inner screw 180 mm. diam., Nominal capacity 1.800 lt.ca, side discharging pipe, Discharging point 860 mm. from floor., hatch on barrel mm. 500 x 700, 1,5 kw drive, installed power - used power in work: about 60-65% : 1.5, capacity: 1800 lt.
maximum number of results exceeded
please refine your search
