m 20 used for sale

width of the strips: 75.0 mm band length: 2000 mm band speed: 29.0 m/sek grinding width: 460 x 75 Plantisch mm Dust suction hood: 100 mm total power requirement: 3.0 kW 100% ED weight of the machine ca.: 66.0 kg range L-W-H: 1080 x 440 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding ...

width of the strips: 100 mm band length: 2000 mm band speed: 15 + 30 m/sel tube diameter: 20 - 76 mm angle adjustable from - to: 30 - 90 Grad Dust suction hood: 2 x 75.0 mm motor speeds:: 1420 / 2660 Upm. face grinding attachment: 400 x 100 mm total power requirement: 2.5 / 3.3 kW weight of the machine ca.: 148 kg. range L-W-H: 750 x 1400 x 1200 mm Furnishing : - Constant belt tension through spring-loaded tensioning device - Standard with cylindrical grinding device - for grinding diameters of diam. 20-76 mm - Quick and easy setting of the desired grinding angle - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt - Large plan grinding surface with protective cover - Slow belt speed (15 m / sec.) - ideal for grinding stainless steel and aluminum - User-friendly tape change, quick and uncomplicated - Quick and easy changing of the grinding ...

sheet width: 2020 mm plate thickness: 2.0 mm distance between columns: 2100 mm angle adjustable from - to: 130 Grad total power requirement: manuell weight of the machine ca.: 1850 kg. range L-W-H: 3100 x 725 x 1350 mm Exhibition machine - like NEW not yet in use () Special price on request Equipment: - heavy/manual swivel bending machine, with counterweight - long service life thanks to robust welded steel construction - universally applicable for metalworking shops and craft businesses - quick and easy bending process using a bow handle - all bearings and guides in a stable design - easy adjustment of the upper beam for efficient work - manual adjustment of the lower beam - manually adjustable angle fixed stop with analogue degree display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2065 mm plate thickness: 1,20 mm daylight opening: 30,0 mm bending angle max.: 0 - 135 ° total power requirement: manuell weight of the machine ca.: 500 kg. dimensions of the machine ca.: 2400 x 1115 x 1150 mm - Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - easy adjustment of the upper beam by means of a foot pedal, Hands are free for the workpiece - manual bending machine for standard bending tasks - segmented upper beam for a large number of bending options - An auxiliary cylinder supports the bending process when folding - faster and easier bending process using a bow handle - easy adjustment of the lower beam to the respective sheet thickness - high upper beam for the production of high-edged profiles Furnishing : - Segmented upper cheek - back gauge - bending segments 38 | 38 | 38 | 50 | 50 | 50 | 50 |  ...

sheet width: 2065 mm plate thickness: 1,20 mm daylight opening: mit WZ 35,0 mm daylight opening: ohne WZ 60,0 mm bending angle max.: 0 - 135 ° total power requirement: manuell weight of the machine ca.: 520 kg. dimensions of the machine ca.: 2400 x 1115 x 1150 mm - Segmented upper beam for a large number of bending options - Universally applicable bending machine for plumbing and repair shops - High upper beam for the production of high-edged profiles - Quick and easy bending process using a bow handle - Easy adjustment of the upper beam for efficient work - The bending angle is set using a scale - Individually removable segments for bending boxes - Robust construction in a modern design Furnishing : - segmented upper beam + bending beam - Foot clamp - Fixed stop for angle adjustment - back gauge - bending segments 38 | 38 | 38 | 50 | 50 | 50 | 50 | 76 | 76 | 101 | 127 | 152 | 203 | 25 ...

: 4 St. : 2 St. Plate thickness: 45 mm table length: 2000 mm range L-W-H: 2000 x 700 x 900 mm weight: 152 ca. kg. Furnishing: - brand new workbench - Multiplex worktop 45 mm with surrounding edge - left: 3x drawers - right: 1x drawer, 1x door in COLOR: BLUE / GREEN OR GRAY available! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4.0 mm ST plate thickness: 3.0 mm VA table-size: 1200 x 780 mm blade length: 200 x 200 mm strokes per minute: ca. 60 min angle adjustable from - to: 15 - 150 Grad engine output: 4.0 kW weight of the machine ca.: 1200 kg dimensions of the machine ca.: 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface to avoid tilting or slipping of the metal sheet - 2x staking stops with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9397092 The data for this ad was created with ModulMWS - the software solution of  ...

plate thickness: 4.0 mm ST plate thickness: 3.0 mm VA table-size: 1200 x 780 mm blade length: 200 x 200 mm strokes per minute: ca. 60 min angle adjustable from - to: 15 - 150 Grad engine output: 4.0 kW weight of the machine ca.: 1200 kg dimensions of the machine ca.: 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface to avoid tilting or slipping of the metal sheet - 2x staking stops with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9397088 The data for this ad was created with ModulMWS - the software solution of  ...

plate thickness: 8.0 mm ST plate thickness: 5.0 mm VA table-size: 1000 x 950 mm blade length: 200 x 200 mm strokes per minute: 60 H/min adjustable: Winkel 30°-140° mm work height max.: ca. 950 mm oil volume: 60.0 l engine output: 4.0 kW weight of the machine ca.: 1200 kg range L-W-H: 1000 x 1120 x 1700 mm from a maintenance workshop New price at the time ~ 21.000 euros Furnishing: - Robust electro-hydraulic notching machine - with adjustable angle, electro-hydraulic adjustment - Adjustment by hand wheels (left + right knife segment) - hardened knives also for cutting stainless steel - front panel - electro-hydraulic knife clamping - Inching mode for setting the shear blades selectable (manual mode) - planed table surface, with T-slots to avoid tilting or slipping of the metal sheet - 2x staking stops with movable and interchangeable stop bars - 2x blank holders - 1x free moving foo ...

plate thickness: 4.0 mm ST plate thickness: 3.0 mm VA table-size: 1200 x 780 mm blade length: 200 x 200 mm strokes per minute: ca. 60 min angle adjustable from - to: 15 - 150 Grad engine output: 4.0 kW weight of the machine ca.: 1200 kg dimensions of the machine ca.: 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface to avoid tilting or slipping of the metal sheet - 2x staking stops with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4.0 mm thickness at Niro-steel: 3.0 mm blade length: 200 mm angle adjustable from - to: 30 - 120 Grad no. of strokes: 60 Hub/min oil volume: 60.0 ltr. table:: 1000 x 800 mm total power requirement: 2.62 kW weight: 800 kg range L-W-H: 1000 x 1500 x 1440 mm Furnishing: - robust hydraulic notching machine, with adjustable angle - Adjustment range 30 - 120 degrees Adjustment with the 2x front handwheels - hydraulic clamping and locking - Infinitely adjustable cutting depth, with digital display - 2x locking accuracy stop, with stop bars - Stripper for sheet metal cutting - Collecting container for clippings - Freely movable foot pedal for triggering the stroke The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2000 (775 + 600) mm y-travel: 620 mm z-travel: 520 mm Control: Heidenhain iTNC 530 turning speed range - main spindle: 12.000 min/-1 power capacity - main spindel: 18 kW table surface area: 1.200 x 600 mm rotary table diameter: Ø 500 mm swivellable: +15/-95 ° rotatable: 0- 360 ° max. table load: 1000/350 kg tool taper: SK 40 number of toolpositions: 30 pos. internal coolant system feed: 20 bar rapid traverse ( X / Y / Z ): 30 m/min dimensions: 5,0x 2,5 x 3,3 m weight of the machine ca.: 11 t CNC-Machiningcenter Universal, 5-Axis and fixed table Machine overhold for 60.000 € - NC-Swivel-Rotary-Table integrated right working area - Fixed-Table left working area - 4th axis on fixed table 165 centre hight - Chip conveyor - internal coolant - filter - 3D probe - Oil dust collector - 2022/2023 overhold for 60.000 € new slideways aspindles in all axis - electric roof - new spi ...

Item: AC SERVO DRIVER (JSDEP-20A) Qty: 10 units Please contact Ms Puteri at 012-8057943 if yre interested

3-deck swashscreen in stainless steel design (polished surfaces) with a screening area of 2.60 m² per deck, drive 4.0 kW via V-belts, equipped with sight glasses for screening material observation. Including 3 screen inserts (various mesh sizes available); Ball knocking devices and balls are available for an extra charge.

greates pass round over bed: 960 mm swing diameter over bed slide: o: 860 / u: 730 mm turning diameter over bed slide: o: 860 / u: 400 control: SIEMENS - 840 D forward bearing diameter: 200 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 24 UK-2 / 2000 equipped with a turret for driven tools as well as tailstock. The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HEYNUMAT 24 UK | HEYNUMAT 24-UK | HEYNUMAT 24 UK 2 2000 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Model: Siemens SIMATIC ET 200M Manufacturer: Siemens Type: IM 153-1 + SM 322 + SM 321 Items: 6ES7 153-1AA03-0XB0 6ES7 322-1BL00-0AA0 6ES7 321-1BL00-0AA0 Voltage: DC 24V Weight: approx. 4.5 kg (complete assembly with all modules) Condition: used, tested, functional Price without VAT per piece Country of origin: Germany Pieces: 1 complete set (8 modules incl. carrier rail)

1 Waldner cup filling machine Round version, 2 cups/bar 95 mm with slip-on lid, Type Dosomat 1.2, No. 2070 Capacity 4,200 U/h, Year of construction 2014 with main feeder, circuit board Welding and slip-on lid feeding spout on round plates, Packing in crates by hand. Roller conveyor for the discharge of the filled Get.

VSA 2032 Feed 3 feed rollers 4 speeds Speeds: 4/8/9/18 m/min Roll diameter 80mm Motor 180W 400V 50Hz G&STÜ-5119032

- Self centerring device - Double column slide ways - Dressing Unit - Tailstock by rack & pinion - Eccentric adjustment 0 - 20 mm - Large Cone-Stone tooling package

Manufacturer: Haas Model: ST-20Y Year of Manufacture: 2016 Voltage: 400V Phase: 3 Frequency (Hertz): 50/60 Hz Full Load Current: 27 Amps Largest Load Current: 18 Amps Short Circuit Interrupting Capacity: 10,000 Amps Wiring Diagram Reference: 96-0284 Short Circuit Current Rating: 5,000 Amps RMS symmetrical Find more here - / Contact us at -

Sm 102-10P Autoplate All 3 washes Perfector 5x5 Cp 2000 only 84 mil Test Print is Possible

• For single and multiple containers • Straight infeed conveyor with stacking device • For PE film • Film width 30\endash 200 mm • Film thickness 20\endash 100 µm • Roll diameter max. 300 mm, core diameter 70/76 mm • Output max. 24 cycles/min, depending on format • PLC Eberle PLS 508 with Eprom • Enclosure with safety switches • Connection 400V/50Hz/8.5kW This machine is offered at a special price and sold as-is without technical inspection.

gebr. Guillotine shears, Helmut Lotze, type 205.3000x16, built 1992 Working width: 3040mm Max. sheet thickness: 16mm Stand width: 3040mm Throat: 200mm Stroke width: 1000mm Motor power: 45kW Stroke rate: 22/min.

different sets for an F 200 3 jaw chuck (base jaws on top jaws)

Manufacturer: UnoTech Model: 200 V5H4 RB Year of Manufacture: 2017 Loose hydraulic unit with 4x 75kW pumps Find more here - / Contact us at -

Manufacturer: Ebu Model: STA 200/2000 Year of Manufacture: 2005 Overhaul: 2016 ( is currently equipped with a longitudinal transfer and has run very little since the overhaul) Punching force: 200 tons Installation space: 2000+800 Ram stroke: 16–160 Plunger adjustment: 0–120 mm Advance max.: 9999.9 Max. bandwidth: 300 Speed range: 30–150 Find more here - / Contact us at -

sheet width: 2000 mm plate thickness: 3 mm rear stop: von Hand, 750 mm number of support arms: 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 200 mm

Face plate 200 mm, partial accuracy +/- 15", incl. Servo motor with hydraulic clamping Fixed tailstock Tip height 200 mm

Stock# UG6392 Automatic machine for lipstick filling. Manufacturer: Cosmatic (IT) Model: SM-2000 Slim Working output up to 2000 pcs/h Device works in silicone mold technology (Long rubbers). Possibility of producing slim lipsticks with an oriented stick. Air cooled. Machine has two refrigeration compressors working alternately. Silicone mold heating by hot air blower (inside) and electrical lamp (outside). Additional heating to prevent the formation of a cone inside the lipstick. Automatic insertion of the stick into the packaging. Automatic screwing station. Manual package loading. Manual capping. Machine equipped with 2 filling heads and melting/dosing pumps. Machine fully functional and still in use. Regularly serviced. New 2023.

Manufacturer: BJORN EVAPORATOR Model: ELT 200 Year of Manufacture: 2004 The evaporator was installed and commissioned and dismantled in October 2022 (Stored , not operational) Electrical Specifications: - Voltage: 3 × 400 V + 0 + Earth - Frequency: 50 Hz - Maximum Fuse: 3 × 150 Amp Find more here - / Contact us at -

Croissant line RONDO, type: SCL - Calibration head - Cutting unit with cutting rollers and guillotine - Winding unit - Comfortable dough weight, seamless dough sheets, relaxation - Cutting separation of the cut-out dough moulds - Gentle winding without pressure on the laminated dough - tightly and loosely wrapped croiccants - Power: Up to 900 pcs per row - Condition: Very good, ready to use - Video in function can be sent Inspection and test run are possible by arrangement.

spindle diameter: 200 mm Processing width on table: 6000 mm Processing height on table: 3150 mm Processing depth: 1985 mm Slide cross-section: 530 x 550 mm table load: 20 t Plate field size: 16800 x 5500 mm tool taper: SK 60 total power requirement: kW weight of the machine ca.: 173 t dimensions of the machine ca.: m - Additional equipment Angle head large and small - The OB no. is: 22979 - The table is the model S20 MP table Size: 2200 x 2500 mm - The processing width on the machine X -Way is 6000 mm - Including 6 plates 5600 mm x 1850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref. no.: 18092 Hersteller: ENGEL Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg

Offer 25375 Specifications: - Working range / cutting length for approx. 5 m raceway approx. 3000 mm - Working range / cutting width approx. 1500 mm - Control BACH - Track gauge approx. 1900 mm - 1 plasma burner with height adjustment - Plasma source KJELLBERG Hi FOCUS 160 i - Cutting current at 100% ED 10 - 160 A - Cutting range steel approx. 5 - 50 mm - Cutting range aluminium approx. 5 - 35 mm - Cutting range stainless steel approx. 5 - 30 mm - Connection 400 V / 35 kVA - Extraction table with extraction system make TEKA, type Filtercube 4 H, built in 2010 - Weight approx. 4 T - Space requirement system approx. L 7.5 x H 1.5 x D 2.4 m - Space requirement for extraction approx. L 1.5 x H 3.5 x D 1.5 m

Manufacturer: Voortman Model: V320-2000 Year of Manufacture: 2019 Operating Hours : approx. 5,800 h Including plasma source Kjellberg Smart Focus 300 and extraction unit Donaldson DFPR06 (last filter change January 2025) Technical Specifications Working Range: - Plate length (min/max): 850 – 6,100 mm - Plate width (min/max): 200 – 2,050 mm - Plate thickness (min/max): 6 – 75 mm - Max capacity: 7,500 kg - Material: Steel Drilling Unit - Type: VD40 - Automatic tool changer: 2 × VTC 5/40 (2 × 5 positions) - Feed and positioning: Servo-driven synchronous servomotors, frequency converter - Spindle speed: 0 – 2,500 rpm (servo motor) - Power: 30 kW - Cooling: Internal cooling air/oil - Tool holder: SK 40 - Drilling diameter: 5 – 40 mm - Thread cutting: M6 – M30 - Countersinking: Yes - Centering capability: Yes - Layout marking (optional): Yes - Hydraulic clamping: Yes Pl ...

Key data: 264 KW, 450 kVA, 400 V

Jenbacher Gas-CHP J 208 GS-C Gas electricity and heat generator from 1994 with 67,000 operating hours, CHP unit with control and silencer, additional parts. 1 available 253 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Stamford HC 534C2, 450 KVA Manufacturer: Jenbacher Model: J 208 GS-C Type: Gas CHP Engine Serial Number: 21619 Engine power [KW]: 264 Electrical power [KWel]: 253 Speed [1/min]: 1,500 Year of Make: 1994 Hours: 67,000 Weight unit [kg]: 5,000 Dimensions LxWxH [cm]: 450 x 150 x 195 AC Generator Stamford HC 534C2 Manufacturer: Stamford Model No.: HC 534C2 Type: AC Synchronous Generator Serial number: 49059/2 Power [KVA]: 450 Voltage [V]: 231 / 400 Frequency [Hz]: 50 Current [A]: 649 Speed [1/min]: 1,500 Year of Make: 1994

Used dough divider RHEON, type: Twin DIvider 400 VX 202 Dough-friendly division from roe dough to Italian ciabatta. The dough is divided by weight and not volume, which means that there is no pressure on the dough and the gluten is preserved. - 1 or 2 rows - RHEON Gravimetric control - Capacity: 800 kg/h - Initial width: 130-150 mm - Weight range 1 row: 150 - 1,200 g - Weight range 2 rows: 75 - 600 g - Condition: Good, ready to use Visits and test runs are possible by arrangement.

Boiling kettle Brökelmann 200 L, side kettle mobile, electric heating in the glycerine bath, diameter of boiler approx. 70cm, depth approx. 54cm, Total dimensions LxWxH approx. 85x105x100cm, connection 400V very good used condition, fully functional

• Permissible load 200 kg • Lifting mast with floor bearing • Overall height 3,050 mm • Lifting height centre of mandrel to floor approx. 2.50 m • Load reversing gear with mandrel holder • Mandrel holder diam. 35 mm, L 460 mm, centre distance 600 mm • Lifting column manually swivelling • Drive 24/400V/50Hz

TECHNICAL SPECIFICATIONS Number of silos: 3 pcs. (identical) Capacity: approx. 200 cbm/pc. Diameter: 6,500 mm Silo body height: 8,500 mm Cone height: 4,000 mm Total height: approx. 10,500 mm Bolted: yes SPECIFIC COMMENT - Hot-dip galvanized steel substructure - At the cone precipitation drainage

Work table AT 2000 with beech wood top and drawers Beech wood worktop with gallery at the back Drawer block left right storage rack at the bottom Stainless steel Approx. dimensions: 2000 x 800 x 980 mm, WxDxH Used device cleaned Plate sanded & re-oiled Quality from a specialist company! Benefit from over 35 years of experience!

Bakery Refrigerated Table BKT 2000 for fast and flexible application Model: BKTM 310 Stainless steel 600 x 400 cm tray Cooling range + 2 to + 8°C adjustable Convection cooling Energy-saving hot gas/condensation evaporation Device is plug ready Refrigerant R 600 a Connection 230V Dimensions: 2020 x 800 x 860 mm, WxDxH NEW Device with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience!

APV high pressure homogenizer., Maximum working pressure: 2000 Bar / 29,000 psi / 200 MPa , Nominal flow rate:: 11 liters/h , Minimum sample: 100 ml , Dead volume: 13 ml , ATEX: EEx e II T1%T6 / EE d IIC T1%T6

Manufacturer: Lundberg ‎ Model: WasteTech 200 Year of Manufacture: 2022 WasteTech 200 All-in-one Units are designed to capture, convey, cut and collect edge trim waste from up to 8 process machines. Configuration of Granulator(s) is customised to the material and number of process machines and disposal can be in a sack, TubeBag, bigbag or compactor. Specifications: - 4 cutting motors - Maximum air capacity: 3,000 m³/hour (1,770 CFM) - Maximum pipe size: Dia. 200 mm (8") transfer - Maximum suction distance: Up to 30 m (100 feet) - Size (LxWxH): 2,535 x 1,300 x 3,290 mm (8’-4” x 4’-3” x 10’-10”) - Weight: 495 kg (1,090 lbs) - Motor ventilator: 7.5 kW (10 HP) - Power: 3 Phase, 230-460V, 50-60 Hz - Sound: 68–72 dB (A) - Colour: RAL5010 Find more here - / Contact us at -

Durma HAP 200 ton x 3100 mm Capacity: 200 ton x 3100 mm Backgauge: elec Passage between uprights: 2550 mm Max stroke: 190 mm Depth of throat: 260 mm Locking speed: 100 mm/sec Working speed: 7 mm/sec Returning speed: 73 mm/sec Length: 4270 mm Depth: 1750 mm Height: 2850 mm Weight: 12 ton

Knuckle Joint Press Kieserling 2000 ton yeer

pressure: 60 t chamfer lenght: 2050 mm distance between columns: 1550 mm throat: 255 mm stroke: 165 mm dayligth: 475 mm working feed: 9,8 mm/sec return speed: 117 mm/sec ajustment speed: 150 mm/sec total power requirement: 5,5 kW weight of the machine ca.: 5000 kg dimensions of the machine ca.: 2300 x 1500 x 2470 mm Equipment: - DELEM DA65 CNC control - Electric backgauge (X-axis), 600 mm - Hydraulic upper tool clamping - Front light barrier - Side and rear protective grilles - Manually adjustable stop bar, foldable (R+Z-axis) - Upper tool - 2x support arms - Machine feet - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 340 mm turning length: 300 mm bar material dia.: 65 mm control: FANUC Main Spindle:: spindle speed:: 4500 min-¹ spindle motor: 11 / 15 kW c-axis: 0,001 ° travel -x axis: 227,5 mm travel -z axis: 320 mm y-axis: +/- 41 mm tail stock: tailstock quill stroke: 80 mm tailstock adjustment: 200 mm Live Tools: work piece power: 5,5 / 3,7 kW toolpiece turning speed range: 6000 U/min total power requirement: 24 kVA dimensions of the machine ca.: 1,65 x 1,65 x 1,85 mm Total weight, approx.: 3200 kg Commissioned in 2015 - FANUC CNC control - Chuck diameter: 315 mm - C-axis with spindle brake - 12-station tool turret with driven tools - 3.2 m bar feeder - Tailstock MK 4 - Set of tools - Set of spare parts (all linear guides, covers) 12,000h operating hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Injector Model: BI 204 C Manufacturer: Inject star Stainless steel Power: 9kW Voltage: 3 x 400V/ 50Hz

Manufacturer: Falch Model: Wheel Jet 30 2000-8-0-E Type of Machine : HD Water Jet Machine Specifications: - Pressure: 2000 bar - Flow rate: 8 l/min - Power supply: 400V, 63A Included Accessories: - 5 m high-pressure hose (false non-stop) - Safety equipment: suit, apron, helmet Find more here - / Contact us at -