m 20 used for sale

Screws, washers, stainless steel screws, VA screws, wood screws, hanger screws, solar fasteners -Solar fastener hanger screws and adapter plates 350 kg -Hanger screws: M10 x 200 1632 pieces. -Adapter plates: 80 x 30 x 5,475 pieces / 80 x 40 x 5,673 pieces -Material: A2 AISI304 stainless steel -Levy/Price: complete -Dimension: 1200/800/H540 mm -Weight: 350 kg

Screws, washers, stainless steel screws, VA screws, wood screws, hanger screws, solar fasteners -Solar fasteners: Hanger screws fully assembled 900 pieces -Type: M10 x 300 240 pieces with adapter plate -Type: M10 x 250 440 pieces with adapter plate -Type: M10 x 200 420 pieces without adapter plate -Material: A2 stainless steel Quantity: Total 900 pieces -Price/tax: complete -Transport dimensions: 980/670/H550 mm -Weight: 246kg

revolving center, revolving center point, revolving Morse taper, revolving center point, revolving lathe center, center point, centering taper -Manufacturer: ABW Revolving center point -Type: ZN 206 -Recording: MK6 -Total dimensions: Ø 140 x 370 mm -Weight: 15.4 kg

Precision balance, spring balance, tension force gauge -Manufacturer: Pesola, precision spring balance type Macro-Line 80196 -Measuring range: 200 Newton -Division: 2 N -Dimensions: 400/40/H40 mm -Weight: 0.5 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: ABW, rotating center point -Type: ZN 204 -Recording: MK4 -Dimensions: Ø 70 x 220 mm -Weight: 2.1 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: ABW, rotating center point -Type: ZNA 205 -Recording: MK5 -Centering point: Ø 28 mm, without point -Dimensions: Ø 90 x 225 mm -Weight: 4.3 kg

hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, drive motor, drive motor, gear pump, gear pump -Manufacturer: Lamborghini , hydraulic pump gear pump -Type: MLPS/BCX/208F -Flange/shaft: see photo, square 8 x 17 mm -Number: 2x pump available -Price: per piece -Dimensions: 150/100/H100 mm -Weight: 2.2 kg/piece

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Bruckner, rotating centering point centering cone 3 pieces -Type: unfortunately without type designation -Recording: MK4 -Dimensions: Ø 60 x 200 mm -Transport dimensions: 200/185/H65 mm -Total weight: 5.7 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: ABW, live center -Type: ZNB 204 -Recording: MK4 -Dimensions: Ø 100 x 215 mm -Weight: 3.5 kg

Fan filter, fan row, air cooler, control cabinet fan, filter fan -Manufacturer: multicomp, axial fan type MCFS23092A/2092HBL.GN. Unused, original packaging. -Voltage: 220-240 V / 14.5 W -Number: 4x fans available -Price: per piece -Dimensions: 100/100/H35 mm -Weight: 0.3 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: HPI MEZ, hydraulic unit with double hydraulic pump -Hydraulic pump: HPI type 1BA2018/2008L10 -Engine: MEZ 7.5 kW 1450 rpm -Dimensions: 755/360/H305 mm -Weight: 94 kg

Simatic panel, operator panel, machine control, interface panel, operating unit, control panel, keyboard, control panel teach pendant -Manufacturer: Xycom, Operator Panel from OMSO CD Printing Machine -Type: 2005 -Dimensions: 420/280/H315 mm -Weight: 6.9 kg

CNC control unit, power supply, switching power supply, servo module, control unit, Pro module, controller, compact control -Manufacturer: Klöckner Moeller, compact automation unit with 5x SUCOcontrol -Type: PS4-201-MM1 / 3x LE4-116-DX1 / LE4-116-XD1 -Individual components: see photos -Price/Sale: only complete set -Transport dimensions: 400/200/H85 mm -Total weight: 2.0 kg

CNC controller, power supply, switching power supply, servo module, control unit, Pro module, controller, compact controller, PLC controller -Manufacturer: Klöckner Moeller, compact automation unit with 5x SUCOcontrol -Type: PS4-201-MM1 / 3x LE4-116-XD1 / LE4-116-DX1 -Individual components: see photos -Price/Sale: only complete set -Transport dimensions: 400/200/H85 mm -Total weight: 2.0 kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer -Manufacturer: MAFI, heavy-duty transport wagon with single-axle turntable steering -Platform: 5160/2000/H680 mm -Load capacity: 16 t -Tires: Solid rubber dual tires 425/150-305 see photos -Overall dimensions: 6830/2000/H680 mm -Transport dimensions: 5160/2000/H680 mm -Weight: 1460 kg

Load stand, swivel stand, lifting stand, shackle, heavy-duty shackle, load jack, lashing eye, lashing ring, anchor point, load stand thread, lashing point -Manufacturer: VEB MWR, shackle heavy-duty shackle -Type: 5 TGL 20440 Form A -Tensile force: 50 kN -Number: 15 shackles available -Price: per piece -Dimensions: 200/140/H75 mm -Weight: 4 kg/pc.

Shackle, load block, swivel block, lifting block, shackle, heavy-duty shackle, load jack, lashing eye, lashing ring, anchor point, load block thread, lashing point -Manufacturer: VEB MWR, shackle heavy-duty shackle -Type: 5 TGL 20440 Form A -Tensile force: 100 kN -Number: 4 shackles available -Price: per piece -Dimensions: 270/190/H95 mm -Weight: 10.1 kg/pc.

Transport trolley, order picking trolley, Corlette, furniture transport trolley, roll container, furniture Corlette -Manufacturer: Cordes, Furniture transport trolley - Corlette -Type: Folding and collapsible design -Load capacity: approx. 600 kg -Number: 11x transport trolleys available -Price: per piece -Dimensions: 2020/1150/H1800 mm -Weight: 91 kg/unit

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Movitrac: 204 xv -Power output: 4.8 kVA -Input: 380 - 50/60 Hz -Output: D 20 - 380 V -2 - 100 Hz -Number: 1 converter available -Weight: 13 kg

Inv. Num. : 9046 Type: ES 200D Producer: Motoman Created: 2010 Parameters: Maximum arm reach: 2651 mm Number of axles: 6 pieces Maximum load capacity: 200 kg Machine weight: 1130 kg

Scheda di controllo

Spessore stampo: 200 min.; corsa piano mobile: 500.

Manual length adjustment via handwheel with digital display For mounting on any Elumatec single-head saw (left) Max. feed length: 3,000 mm Pneumatic Locking Brake

pressure:250 t distance between columns:1110 mm stroke:250 mm Distance table/ram, max. stroke up, adjustment up:500 mm Table surface area:1100 x 900 mm Table height above floor:950 mm Side window:690 mm Ram surface:1100 x 900 mm Oil volume:730 l Power capacity:56,0 kW Dimensions (WxDxH):2,3 x 1,55 x 3,96 m

Key data: 2000 KW, 6300 V

USED GAS GENERATOR SET MAKE: MTU TYPE: 20V 4000 GS RATING: 2000 KW FUEL: NATURAL GAS M. YEAR: 2016 TOTAL HOURS: 55.000 ALTERNATOR: 6300V, 2600 KW, 50HZ SCOPE: GENSET, CONTROL PANEL, GAS TRAIN

die Steuerung ist vorbereitet für Kompressor-Gleichlaufsteuerung. inkl. · Drucktaupunkt-Steuerung ·Mit einer Drucktaupunkt-Steuerung können Sie den Trockner im starren oder variablen Zyklus betreiben. Im starren Zyklus erfolgt die Umschaltung nach einer festgelegten Zeit (in der Regel nach 5 Minuten). Im variablen Zyklus erfolgt die Umschaltung abhängig vom erreichten Drucktaupunkt und der Beladung des Trockenmittels. Die Adsorptionszeit im variablen Zyklus beträgt maximal 60 Minuten. Neugerät Achtung: Das Gerät wird ohne Vor-, und Nachfilter geliefert. Ein Vorfilter ist dringend erforderlich, falls nicht schon vorhanden.. Siehe Optionen unten. (Bild: Katalogbild) Erforderlich: Vorfilter (lose beigefügt) - Euro 3.600,- + MwSt. Nachfilter (lose beigefügt) - Euro 3.600,- + MwSt.

die Steuerung ist vorbereitet für Kompressor-Gleichlaufsteuerung. inkl. · Drucktaupunkt-Steuerung ·Mit einer Drucktaupunkt-Steuerung können Sie den Trockner im starren oder variablen Zyklus betreiben. Im starren Zyklus erfolgt die Umschaltung nach einer festgelegten Zeit (in der Regel nach 5 Minuten). Im variablen Zyklus erfolgt die Umschaltung abhängig vom erreichten Drucktaupunkt und der Beladung des Trockenmittels. Die Adsorptionszeit im variablen Zyklus beträgt maximal 60 Minuten. Neugerät Achtung: Das Gerät wird ohne Vor-, und Nachfilter geliefert. Ein Vorfilter ist in den meisten Fällen dringend erforderlich. Siehe Optionen unten. (Bild: Katalogbild) Erforderlich: Vorfilter (lose beigefügt) - Euro 3.600,- + MwSt. Nachfilter (lose beigefügt) - Euro 3.600,- + MwSt.

CNC machining center Type: Integrex J-200 S Manufacturer: Mazak Year: 2015 Control: Mazatrol SmoothG 5-axis turning + milling in one clamping X: 450 mm Y: 200 mm Z: 960 mm B axis C axis Main spindle speed: 5000 rpm Subspindle: allows complete machining from both sides without re-clamping Max working diameter: 500 mm Max working length: 910 mm Tool tray: 36 positions Capto C6 / PSC63 Internal cooling A large number of accessories (jaws, clamps, holders, etc.) Part of the sale is a functional post-processor for SolidCAM Chip conveyor Machine in good condition, fully functional, under power Find more here - / Contact us at -

CONTROLS   CNC controls MAZATROL 640 T NEXUS WORKING RANGE TURNING   turning diameter (max): 380 mm   bar diameter (max): 65 mm   worpiece length max.: 575 mm MAIN SPINDLE   spindle revolutions (max): 5000 /min   drive power: 26 kW COUNTER SPINDLE   spindle revolutions (max): 6000 /min   drive power: 11 kW X/Z SLIDE   Z-axis travel: 575 mm   X-axis travel: 230 mm   Y-axis travel: 585 mm   number of tool positions (total): 12   - rotation speeds (max): 4500 /min   - drive power: 5.5 kW Additional options• Kitagawa BB-08 3-jaw chuck• Kitagawa B-206 3-jaw chuck• Parts catcher• Interface for bar feeder• Tool holder package, including driven holders• Coolant pump• Chip conveyor

General SKUR0231 MakeDraiswerke GmbH Mannheim (D) TypeT-2000 SM LocationBarneveld Pressure Working pressure jacket6 Bar Main Features MaterialStainless steel Volume2000 Ltr. Motor24 KW Specified Features - Powder turbo mixer Powder turbo mixercheck Capacity2000 Ltr Trough sizesdia 1200x1950mm Inlet1090x900mm Top connectionsdia 80mm (1x) Inspection hatch550x400mm Outletdia. 300mm With jacket(150 ltr) Max. temperature165 degr. C With adjustable packing glandscheck Glands air purgedcheck Motor16 / 24 kW 380 Volt Ex MaterialStainless steel 1.4541 (321) Information No.51989 Year of construction1985 Floorspace4,4x1,6 M Total height1,5 M Weight5000 Kg Extra Specificationsincluding Bucher filter. filter housing material 1.4301 including 2 filter cartridges (20 filter bags 450x1100 mm) and transport trolley to disassemble the filter cartridges, filter housing size  ...

General SKU020Y106 MakeDrais Mannheim TypeTurbuMix TM-200E FM1 No.56 008 Year of construction1999 LocationBarneveld Main Features MaterialStainless steel Volume200 Ltr. Motor15 KW Specified Features - Powder turbo mixer MaterialStainless steel 1.4541 (321), Stainless steel 1.4571 (316Ti) Powder turbo mixercheck T-armscheck Capacity200 l. Useful capacity60-148 l. Trough sizesø 600 x 750 mm Inlet275 x 600 mm Inspection hatchø 600 mm Outletø 120 mm Motor7,5 kW 400/690 V Speed mixing shaft± 125 rpm With lump breakercheck Motor7,5 kW 400/690 V Speed lumpbreaker1450 rpm Information With switchgearcheck Floorspace2,5 x 2,1 m Total height2,1 m Weight2500 kgCatalysts & fillersFeed additivesDiscountPowder turbo mixersOther pharmaceuticsCosmeticsFood additivesSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicSpicesOther c ...

General SKU247S159 MakeLipp Mischtechnik GmbH (D) LocationBarneveld CEcheck TypeIMR-E 2000 Pressure Working pressure10 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume2090 Ltr. Motor55 KW Specified Features - Powder turbo mixer MaterialStainless steel 1.4571 (316Ti) Powder turbo mixercheck Capacity2090 ltr. Trough sizesdia. 1100x2200mm InletDN200 Inspection hatchdoor dia. 1100mm OutletDN200 Max. temperature-40/120°C Motor55 kW400/690 Volt (Ex) Speed mixing shaft50 rpm With lump breaker(3x) Motor15 kW 400/690 Volt (Ex) (3x) Speed lumpbreaker965 rpm Information No.4920 Year of construction2011 Mounted on framecheck Floorspace2,5x4,7 M Total height2,3 M Weight7500 Kg ATEX compatiblecheck Extra Specificationsshaft seals by means of a flushed seal (Eagle Burgmann) including filter and product dosing vessel with agitator Catalysts & fil ...

General SKU247S158 MakeLipp Mischtechnik GmbH (D) LocationBarneveld CEcheck TypeIMR-E 200 Pressure Working pressure10 Bar Main Features MaterialStainless steel Volume200 Ltr. Motor11 KW Specified Features - Powder turbo mixer Useful capacity296 ltr (nett. 200 ltr. ) With coverdia. 560mm InletDN100 OutletDN150 Max. temperature-40/120 degr. C. With adjustable packing glandsmechanical seal Motor11 kW 230/400 Volt (Ex) Speed mixing shaft64 rpm Suitable for liquidcheck Powder turbo mixers Powder turbo mixercheck Capacity296 ltr Useful capacity200 ltr. Trough sizesdia. 560x880mm InletDN100 OutletDN150 Max. temperature-40/120 degr. C. With adjustable packing glandsfushable mechanical seal Motor11 kW 230/400 Volt (Ex) With frequency controllercheck Speed mixing shaft64 rpm With lump breakercheck Motor15 kW 400/690 Volt (Ex) Speed lumpbreaker965 rpm MaterialS ...

General SKU066A334 MakeHalvor Forberg A/S Larvik Norway TypeFT-200 No.S12-94 Year of construction1994 Mounted on framecheck Main Features MaterialStainless steel Volume200 Ltr. Motor5.5 KW Specified Features - Paddle mixer Paddle mixercheck Double shaftcheck Useful capacity200 Ltr. Trough sizes1000x850x950mm ManholecheckInspection hatch 785x410mm OutletDia. 220 mm Motor5,5 KW, 380/660 Volt MaterialStainless steel 1.4301 (304) Information LocationBarneveld Floorspace 1,7x1,6 m Total heightmixer without filter 2,5m Weight2250kg Extra Specifications- Equipped with Forbergs PMS Pin Mill System = 2 high speed rotating shafts with welded pins - Heat exchanger and fan are missing - With nozzles for liquid injection - :With envelope filters Catalysts & fillersFeed additivesDiscountOther pharmaceuticsCosmeticsSugarPaddle mixersAnimal feedOther feedConfectionerySolid pha ...

General SKU014F047 MakeMixaco Maschinenbau Neuenrade TypeCM-2000 D No.22.856 Year of construction1993 LocationBarneveld Main Features MaterialStainless steel Volume1600 Ltr. Motor90 KW Specified Features - Cold mixer Cold mixerContainer mixer (1x) Capacity1600 Ltr, Useful capacity 800 Ltr Vessel sizesdia. 1500x750mm (brand new OEM vessel) With cover(jacketed) Outletdia. 300mm With motor90 KW, 380 Volt MaterialStainless steel 1.4301 (304) Information With switchgearcheck Floorspace3,2x1,8 M Total height3,0 M Weight10.000 KG Extra Specifications-- RECONDITIONED -- Technical specs Extra informationbrand new oem vessel DiscountCold mixersReconditionedMixacoDiscountPlastic machinery > Cold mixersReconditionedBrand > Mixaco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination ...

General SKU205P135 MakeMorton Machine, Motherwell Scotland No.22628 Year of construction1979 Mounted on framecheck Pressure Working pressure jacket1.7 Bar Main Features MaterialStainless steel Volume2000 Ltr. Motor55 KW Specified Features - Powder turbo mixer Powder turbo mixercheck Capacity2000 Ltr Trough sizes2950 x 950 mm InletDia.300 mm Top connections(2x)Dia.80 mm Inspection hatch600 x 460 mm en inlaat Outlet300 x 250 mm With jacketcheck With adjustable packing glandscheck Motor55 KW, 415 Volt (ex) Speed mixing shaft+/- 75 Rpm MaterialStainless steel Information LocationBarneveld Floorspace4900 x 2500 mm Total height1600 mm Weight3300kg ATEX compatiblecheck Extra Specificationsvessel provided with 4 connections for lumpbreakersCatalysts & fillersFeed additivesPowder turbo mixersOther pharmaceuticsCosmeticsFood additivesSugarAnimal feedOther feedConfec ...

: gebraucht : WA0178 : 279 € : 1 : 835 mm mint condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 53600 € : 1013.04 € : 2050 mm : 3 mm : 2 mm : 4 mm : Motorisch : 3350 mm : 2200 mm : 1900 mm : 3800 kg : 1000 mm CNC control with tabular programming - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in t ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12630 € : 242.5 € : 0.4 - 2 mm : 200 mm : 300 mm² : 63 mm : 150 m/min : 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2016 : 9737 : prompt, Zwischenverkauf v : 9800 € : 1 : 8330 € : 2025 mm : 3 mm : 500 mm : 4 kW : 2500 mm : 1720 mm : 1200 mm : 1100 kg Manual back gauge 500 mm Foot pedal Side stop 4 table support arms Light barrier protection at the rear of the machine Stroke counter Sheet ejection to the front for small parts Operating manual in English with EC declaration of conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece thickness max.:80 mm workpiece thickness min.:5 mm plate size without being adjusted:2000x1000 mm size of plate min.:100x100 mm control:CNC Mubea Matic100 hole diameter:min/max:10/40 mm workpiece weight:750 kg deburring device max.:d=40 mm traversing speed:80 m/min work height max.:1050 mm positioning accuracy:+/- 0,5 mm opening of gripping pliers min/max.:Typ I: 5/45 mm opening of gripping pliers min/max.:Typ II: 45/85 mm feed length:max. 150 mm rapid traverse::8 m/min spindle turning speed range:112-180-224-280-355-560 U/min work table::L:2500;B:950 mm arm gripping device:4 Stück tool taper:Kegel DIN 6327 longitudinal travel:x=2800 mm cross travel:y=1000 mm bore spindle stroke:max. 150 mm total power requirement:25,0 kW weight of the machine ca.:5,5 t space requirements approx. LxWxH:5,0x5,5x2,7 m plate size with beeing adjusted also 1000x4000 mm possible with roller conveyo ...

pressure:200 t throat:360 mm stroke:560 mm distance table/ram, max. stroke up, adjustment up:780 mm table surface area:740 x 720 mm pressure of drawing cushion in table:80 t stroke of drawing cushion in table:200 mm die cushion area:530 x 530 mm table height over floor:920 mm ram surface:560 x 560 mm slide drill hole x depth:70 mm power requirement:35,0 kW weight:10,0 t dimensions:1,3 x 2,0 x 3,4 m

pressure:250 t distance between columns:1125 mm stroke:250 mm distance table/ram, max. stroke up, adjustment up:800 mm table surface area:1100 x 900 mm pressure of drawing cushion in table:63 t stroke of drawing cushion in table:100 mm die cushion area:700 x 400 mm table height over floor:960 mm side window:700 mm ram surface:1080 x 900 mm oil volume:1000 l power requirement:35,0 kW weight:23,0 t Dimensions (WxDxH):2,5 x 2,3 x 4,5 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick foundation pit:not necessary

pressure:2000 t distance between columns:975 mm stroke:400 mm distance table/ram, max. stroke up, adjustment up:1000 mm table surface area:1015 x 1050 mm table height over floor:800 mm capacity of ejector in table:6,3 t ejector stroke in table:100 mm capacity of ejector in ram:65 t ejector stroke in ram:100 mm ram surface:975 x 1050 mm return capacity:150 t speed down:235 mm/s speed up:250 mm/s working speed:5 - 20 mm/s oil volume:4000 l height over floor:3,65 m height beneath floor:3,75 m power requirement:194,0 kW weight:105,0 t dimensions (WxDxH):5,0 x 6,5 x 7,4 m

pressure:200 t distance between columns:1100 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:1100 mm table surface area:1000 x 1000 mm pressure of drawing cushion in table:63 t stroke of drawing cushion in table:250 mm die cushion area:800 x 750 mm table height over floor:800 mm ram surface:1000 x 1000 mm Speed down:400 mm/s speed up:250 mm/s working speed:22 - 56 mm/s power requirement:45,0 kW weight:24,0 t dimensions (WxDxH):2,4 x 1,5 x 5,9 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic

Key data: 2000

Nozzle spacing: 100 mm Screw diameter: H260: 38 H470: 45 mm Injectable volume:H260: 168 H470: 278 cm3 Injection Pressure: H260: 1564 H470: 1659 Column width: 610 x 610 mm Mould thickness: 280-760 mm Opening stroke: 560 mm Cores:: 2 Robot Interface: Yes Possibility of a GROSFILLEY swivel base

total power requirement:16,5 kW weight of the machine ca.:3,8 t

Cooling tray type KW 1000-200-200 self-sufficient for strand cooling in the production of granules or filaments. - a mobile and height-adjustable base frame made of welded steel raw, left machine version, painted - Frame-height adjustment of the top edge of the water bath from 900 mm to 1050 mm - a VA cooling tray 1000x200x200mm - 2 pieces adjustable and mounted strand holder - clamped to water edge - 1 piece wiper bled for partial strand drying - 1 piece of adjustable tub plug for filling height adjustment - 1 piece of VA water tank (reservoir) as service water tank - 1 piece of bacon water pressure pump to supply the cooling tank with sufficient cooling water from the water tank - 1 piece of direct 1/2" fresh water connection via float switch and solenoid valve for connection to the customer's side Fresh water network - Tub overflow - drain pipe DN50 for connection to  ...